Can not log in another Blackberry ID in the same BB device

Can not log in another Blackberry ID eventhough I have already sign out(and wipe out data automatically) previsous
Blackberry ID from the same the device.
Please someone kindly assist ASAP.
PS. Do I need to deassociate both via device & email?

kkawin45 wrote:
Can not log in another Blackberry ID eventhough I have already sign out(and wipe out data automatically) previsous
Blackberry ID from the same the device.
Please someone kindly assist ASAP.
PS. Do I need to deassociate both via device & email?
Hello kkawin45
Welcome to BlackBerry Support Forums
You cannot use multiple BlackBerry ID on your BlackBerry 9900 at a same time ! On BlackBerry 7 devices BlackBerry ID is deep integrated with our device . If you want to use a new BlackBerry ID then perform a security wipe , while wiping be sure to Mark everything ( User Installed application , Emails ) but after a full backup .
Refer to this KB Article for help :
KB26694 : How to change the BlackBerry ID on a BlackBerry PlayBook tablet or BlackBerry smartphone
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Similar Messages

I can not establish more then 1 call at the same time

Hi,
I have SPA9000 with four active accounts. I can not establish more then 1 call at the same time. Accounts are all in registered state. The field in SIP tab, Default Group Line:, is by default: 1,2,3,4 which means if line 1 is busy try the next one in the order ( in this case number 2). But this is not happening. It always tries to dial out with the first line (account). There is no problem with the provider and I don't want to specify groups of userID's and to assign them special line for dialing out.( by the way in this way it is possible to establish more parallel calls, but then each user will always have to dial thru specific line only). Please help me to find out if the SPA is faulty or give me some workaround, so that when I try to make a call , if one line is busy to dial out thru the next available.
P.S. I suspect that SPA9000 does not notice when the line is busy or not. Maybe there is some issue with the Control Timer Values (sec) on Regional tab.
Thanks,

no it can only be one person at a time

"you can not use multiple instance of Program at the same time"

Hello @ all,
I have a Problem, after the installing from Acrobat Testversion and acrobat reader in version in "all Combination" 8 an 9.
I get this misstake information "you can not use multiple instance of Program at the same time" if I want open more then 1 .pdf.
If I have no pdf open, but acrobat/reader so i can´t open with the same Misstake.
I have deinstalled and installed, Allways I bekame the same information. I tryed all things to clean and know i don`t know forward.
Important: by Drag an Drop in the Acrobat Reader it is going, but by direct click on the pdf i get mistake.
Maybe, you know what I can do!
Thanks for help!

Installation of both Acrobat and Reader in the same Windows machine is not advisable. If I were you, I would remove both completely and then reinstall the one you want to keep.

I can download photos to my computer via my Ipod Touch but not a video of 833mb yet I can send it to my FB account on the same said device, does this make any sense?

I can download photos to my computer via my Ipod Touch but not a video of 833mb yet I can send it to my FB account on the same said device, does this make any sense?

See:
iOS: Importing personal photos and videos from iOS devices to your computer
Do y have XP? if so see that topic in the above link,
Can you go to My Computer>iPod>DCIM folder and copy it from there?
Windows XP can't import video files larger than 500 MB using Camera and Scanner Wizard. You can transfer these files from your device by selecting them in My Computer and dragging or copying the files to your computer's hard drive.

TS2972 My itunes library on my home screen does not appear on another home screen on the same computer when itunes is opened on the other screen/user. Home Sharing is turned ON. How do I fix this problem?

My itunes library on my home screen does not appear on another home screen on the same computer when itunes is opened on the other screen/user. Home Sharing is turned ON. How do I fix this problem?

You'll have to contact the developer about this. Apple doesn't make this app;

How can I log into two differant accounts at the same time in two windows without the second window affecting the first.

I'm trying to log into two facebook accounts at the same time in differant windows. When ever I log into the second account in the second window it changes the login in the first window. When I hit home or any other link the first window account has been logged out and logged into the second window account. I tried installing a second copy of firefox in a differant folder that the first but it seems to use all the files of the first installation. If I can get 2 toatally seperated instalations that don't rely on the same history, cookies, cache, etc I belive that will solve my problem. Please help.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; OfficeLiveConnector.1.4; OfficeLivePatch.1.3)

Nah, that won't work. Facebook has a feature that gets your IP Address, so as soon as you sign into one on the same computer, it changes the other login for safety purposes (say, someone was on a public library PC. They forgot to log out. Someone else logs in, and it automatically logs them out). You'll need 2 computers to do that.

2 Mac can not see each other via airdrop under the same airport/timecapsule.

I have 2 iMac in my home with a TImeCapsule (gen4).
The wifi is on both 2.4G and 5G with the same SSID.
iMac A is working on 2.4GHz, iMac B is working on 5GHz.
So they can not see each other via airdrop, meanwhile they can see each other in the left panel of Finder.app
Is it a known issue of AirDrop?

Hi Kirby Zhou,
Welcome to the Apple Support Communities!
It sounds like you would like to utilize file sharing between computers, not necessarily AirDrop. Please refer to the attached article for information on the file sharing process. If this is not what you are looking for, please let me know.
Share your files with other Mac users - Mac Help
Best regards,
Joe

Can not connect to printer and internet at the same time

I use my airport to connect to the internet via the ethernet port. Internet was working fine until I connected my printer to airport via its USB port. Now the printer works fine but I can't connect to the internet using the same connection.
I can still connect to the same server using its wireless service, but I have to keep hitting the drop down list in the menu bar to select that connection. Can't I just keep connected to the same connection without having to switch back and forth? I thought these mac products were supposed to be all user friendly... I don't have time for this.

The only way to print and use the internet (or university network) at the same time is to do one of the following:
(1) Connect the printer via USB to your computer.
(2) Connect the AirPort Extreme base station (AEBS) via Ethernet to the university's network and then configure the AEBS to act as a bridge (not sharing a single IP address).
The AEBS can NOT wirelessly join the network.

I have received a .xlsx (excel) file. It is also ziped and I can not open it. I also have the same problem with .csv files. I can not open them either. How do I get them open. Thanks.

I have recived via an email attachment a .xlsx (Exel) file which is also zipped. I can not open it. I also can never get .csv files open. How do I overcome these two problems?
Thanks,
sorsini

drag it to the Desktop. double-click it to unzip it.

HT1766 How can I keep two versions of backup of the same IOS device in iTunes?

HI,
I wish to keep two versions of the same iPad backup in iTunes.
Is it possible? Pl. advice. Thanks. K.V.Ramani

Hi Diavonex,
Pl. see screen shot of iTunes backup.
I have one iPhone and one iPad back up only. Pl. advice. Rgds, Ramani

Broken. Can not log in anymore.

Sorry if this is in the wrong place, but the form above wouldn't let me select anything else. Likewise, I can't seem to find anyone or anything that is willing or able to help, so this is my last resort. My Skype literally just stopped working today- throwing an error and now I cannot use the program at all. I'm at a loss- the only thing I could find was a news article stating that there is a problem, but it could take "weeks" for Microsoft/Skype to roll out a patch for it, which is ridiculous for a product of this nature. I ahve tried unistalling and reinstallign to no avail- what should I do now? I'm up for anything at this point.

kkawin45 wrote:
Can not log in another Blackberry ID eventhough I have already sign out(and wipe out data automatically) previsous
Blackberry ID from the same the device.
Please someone kindly assist ASAP.
PS. Do I need to deassociate both via device & email?
Hello kkawin45
Welcome to BlackBerry Support Forums
You cannot use multiple BlackBerry ID on your BlackBerry 9900 at a same time ! On BlackBerry 7 devices BlackBerry ID is deep integrated with our device . If you want to use a new BlackBerry ID then perform a security wipe , while wiping be sure to Mark everything ( User Installed application , Emails ) but after a full backup .
Refer to this KB Article for help :
KB26694 : How to change the BlackBerry ID on a BlackBerry PlayBook tablet or BlackBerry smartphone
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

How to select a layer mask (not its contents) and another layer/folder at the same time?

I can do one or another, but both at the same time?
It is annoying because a mask selection turns into layer selection when you select a second layer/folder.

Well a layer mask is just that for that layer. If you want to apply that mask to a new layer, you can drag it or alt drag to drag a copy to the new layer. Then it will have its own layer mask. When your done, if needed you can then remove that mask from that new layer, if for some reason you only wanted to see a temporary mask.

I have a problem in imessages I can not log on

I have a problem in imessages I can not log on and update through the application.Every time you logon work shows me a message saying "The server encountered an error processing registration. Please try again later"

This could be a complicated problem to solve, as there are many possible causes for it. Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
Before proceeding, test on another network, if possible. That could be a public Wi-Fi hotspot, if your computer is portable, or a cellular network if you have a mobile device that can share its Internet connection. If you find that iMessage works on the other network, the problem is in your network or at your ISP, not in your computer.
Step 1
Check the status of the service. If the service is down, wait tor it to come back up. There may be a localized outage, even if the status indicator is green.
Step 2
Restart your broadband device and your router, if different. You may have to skip this step if you don't control those devices.
Step 3
From the menu bar, select
 ▹ About This Mac
Below the "OS X" legend in the window that opens, the OS version appears. Click the version line twice to display the serial number. If the number is missing or obviously invalid, take the machine to an Apple Store or other authorized service center to have the problem corrected.
Step 4
Back up all data, then take the steps suggested in this support article.
There are five steps in that article. Please take all of them. If you don't understand some of the steps or can't carry them out, ask for guidance.
Step 5
From the menu bar, select
 ▹ System Preferences ▹ Network
If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If any proxy options are selected, make a note of them and then deselect them. You don’t need to change the bypass or FTP settings. Click OK and then Apply. Test. The result may be that you can't connect to any web server. Restore the previous settings if that happens.
Step 6
Select from the menu bar
 ▹ System Preferences… ▹ Flash Player ▹ Storage
and click
Block all sites from storing information on this computer
Close the preference pane.
Step 7
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
If iMessage worked in the guest account, stop here and post your results.
Step 8
Boot in safe mode and log in. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. After testing, reboot as usual (i.e., not in safe mode) and test again.
If iMessage worked in safe mode, but didn't work when you booted out of safe mode, stop here and post your results.
Step 9
Reset the NVRAM.
Step 10
Reinstall OS X.
Step 11
If none of the above steps resolves the issue, make a "Genius" appointment at an Apple Store, or contact Apple Support.

Launch daemon's, I have deleted the files in the folder and can not log in to recover the files , safe book didn't help can you ?

Launch daemon's, I have deleted the files in the folder and can not log in to recover the files , safe book didn't help can you ?

- Can you use Target Disk Mode : How to use and troubleshoot FireWire target disk mode to assist to recover the files.
- Need another Mac and a Firewire cable
Cheers

Can not log on after successfull installation - SAP Netweaver Trial JAVA

Hello,
I have successfully downloaded and installed the NW Java trial. (NW_JAVA_700SP14_SR3.rar)
I can see in SAP MMC that all the services was started. At http://vjm:50000 I can see the default page.
Unfortunately I can not log on to any page that need SAP authentication (eg. User management, NW administrator),
but can log to pages which needs just basic browser authentication (eg: Web Service Navigator, UDDI client, System Information).
The portal also does not let me log on (http://vjm:50000/irj ).
When I get the standard SAP NW log on screen, after entering Administrator with the correct master password, simply the log on screen appears again (the password field is cleared). I also tried some incorrect user name / password just to check the difference. In that case I got the correct error message.
I installed the software with WMware, Windows 2003 server, allocated enough disk space and 1.6Gbyte RAM. The installation finished without errors. Prior, I installed the MS loopback too (tried without it too). In SAP MMC everything is green, only have an open alert in J2E 00 -> Services -> Security -> Aggregated Data -> Invalid session count "262 > 200 last reported value above treshold".
I am using the standard internet explorer coming with Win2003 server.
Tried the users: Administrator, SDM, Guest, ADSUSER. I know that the password is correct, because I don't get any error if I use it, just getting the log on screen back ...
Could anyone pls help me how can I log on to the system? Or is there any security trace file or log which could help me solve this problem?
I am desperately trying to install this trial, I completely reinstalled the software 5 times but still can not use it
Laszlo

Hi,
is your problem persisting?
CAVE: If you use a wrong user/pw combination > 3 times the account of the user may be locked!
try j2ee_admin instead of administrator or try adm together with your Masterpassword
Do you have to specify the users pw inside the installation procedure? In "normal" installations this has to be done.
If not the pw´s in the documentation of the previous answer`may fix your problem.
The sap mmc is irrelevant for user authentication.
Green means your system is running, nothing else.
kind regards
Tom

Can not log in another Blackberry ID in the same BB device

Similar Messages

Maybe you are looking for