Can not log on user@domain

I can not log on the JES identity server 6.1 with user@domain.
How do i setting the identity server to support user@domain ?
Thanks

Configure LDAP attribute name which contains this value in the list of aliases for core and authentication modules.

Similar Messages

Can not log into server computer with any accounts - "You are unable to login to the user account "abcdefg" at this time. Logging in to the account failed because an error occurred."

I have a Mac mini running the latest version of OS X and Server. Been running fine and flawlessly. However, I had a strange problem with the iCloud preferences panel crashing when I tried to access it, so I rebooted. Now I can not log into the system with any accounts. My master admin account (along with all the others) gives me the error:
You are unable to login to the user account "abcdefg" at this time. Logging in to the account failed because an error occurred."
I am able to see the server from other macs and I can log into it using the same account, but it only shows me a few of the shared folders I have access to but NOT to my main directories.
Rebooting into Command-R and doing a disk utility, I try and repair permission on that drive and get a bunch of errors like:
ACL found but not expected on Users
Repaired "Users"
ACL found but not expected on Users/.localized
Repaired "Users/.localized"
ACL found but not expected on Users/Shared
Repaired "Users/shared"
ACL found but not expected on Users/Shared/.localized
Repaired "Users/Shared/.localized"
Permissions repair complete.
But rebooting is no joy...same problem. Any idea what is going on or how to repair it? Should I do a time machine restore? Complete new OS X install? Any idea what is causing this or how to salvage it?

Got everything to re-install and it worked fine...for a few hours. Then I came in to find ALL of my network users deleted. Just GONE. Then found out the Open Directory was trashed and was unable to open, recover or restore from a backup. Looks like I may have a bad drive here.
I installed a new drive in the system, re-installed and so far (for a couple of hours anyway) the system seems to be working and stable.

User can not log in

I have a Document Center protected document - it's a test one, that simply needs a valid AdobeID and Password to open it.
A new user can not log in and view it, older users are OK. He can log in, change has password etc, but when he tries to open the pdf, it will not accept his user name/password saying "The email address or password you entered is incorrect or you need to update your Adobe Online Centre Account. Please enter your email address or password again, or click the Manage My Account button below for help with your account". He has tried both but gets nowhere - with Manage My Account, He can log in and see his details, change password - but still can not open the pdf!
Can anyone please help?
I notice the link to Document Centre support now fails - is there any support for Document Center anymore?

Hi Chetan,
You may check this thread to find your solution:
Re: Two licences but only one is visible
Thanks,
Gordon

Can not log in with user sap*

Hi all,
I have already installed EP and it is running on the server, but I can not log in using sap* even I have already provide the correct password. (default password form installation guide)
Can anybody give me some guidance?
Thx

Hi Tjarliman Rusadi ,
If you want to login portal with SAP* , you have to follow below steps:
( SAP* is an emargency user when the "Administrator" account is locked or password forget.)
STEP-1: Enable "SAP*"
1.Start the Config Tool C:\usr\sap\<SID>\<engine-instance>\j2ee\configtool\configtool.bat
Ex: D:\usr\sap\F02\JC00\j2ee\configtool --> configtool.bat
2.Goto cluster-data --> Global server configuration --> services --> com.sap.security.core.ume.service
3.Double-click on the property "ume.superadmin.activated = TRUE"
4.Double-click on the property "ume.superadmin.password=<Enter any password ex: abc123>"
5.Save.
6.Restart the engine.
STEP-2: Login with "SAP*" into portal
1. http://<host>:<Port>/useradmin/index.jsp
2. Enter userid / password as" SAP* / <password ex: abc123>"
3. Search for "Administrator" user
4. Reset or change password for "Administrtor"
STEP-3: Disable "SAP*"
1.Start the Config Tool C:\usr\sap\<SID>\<engine-instance>\j2ee\configtool\configtool.bat
Ex: D:\usr\sap\F02\JC00\j2ee\configtool --> configtool.bat
2.Goto cluster-data --> Global server configuration --> services --> com.sap.security.core.ume.service
3.Double-click on the property "ume.superadmin.activated = FALSE"
4.Save.
5. Restart the engine.
STEP-4: Login with "Administrator"
1. http://<host>:<Port>/useradmin/index.jsp
2. Enter userid / Password as "Administrator / <password>
3. it will ask change password just change it.

Master Data Services - Can not add new User and MDS can not Identify LOCAL Users

Team,
We are using SQL Server 2008 R2 and system working since long and suddenly we observed mentioned two issues. The server MyServer is already restarted but did not help. The MDS installed and configured on SAME Machine (MyServer).
I have two issues here.
1. MDM website can not Identify the local Users (MyServer\MyUser).
The User created on local Machine (MyServer\MyUser). I logged into MDM website using Admin login and click on User and Permission. Then I click on add and Text box appears to type UserName. Here I type "MyServer\MyUser" (MyServer\MyUser is already
exists and working since long). Then click checkName; I received a message "No exact Match was found for MyServer\MyUser". Where as User from OTHER domain identified in MDM but could not identify ONLY the local users like "MyServer\MyUser".
2. Can not add new user in Existing working MDM.
I created windows user on machine (MyServer\MyUser1) and add it in UserGroup having an access to MDM. and then I tried to login to MDM using newly created user (MyServer\MyUser1) ; I see error Access Is Denied. The Permission assigned to UserGroup (not
to individual user). The new User (MyUser1) should automatically get added in MDM once logged in. This is working for existing users in UserGroup; BUT NOT ONLY for new user (MyUser1).

Now I Solved this problem in my case.
I just grant again all permissions according http://msdn.microsoft.com/en-us/library/ff486994.aspx. Now all work fine.
Hope, it will help

OID can not display some users - java.lang.ArrayIndexOutOfBoundsException:0

We have set up AD to OID synchronization for users and groups using Import connector, and it worked fine. The users in OID can log into applications protected by OAM. But recently I found that some users that could be displayed in OID before can not be displayed now. If I click on the DN in Oracle Directory Manager, a error window pops up. It is a long error message, and the first a few lines are as follows :
0
java.lang.ArrayIndexOutOfBoundsException:0
at oracle.ldap.admin.AttrOptions.<init>(entry.jave:3151)
at Oracle.ldap.admin.Entry.getProp(entry.java:457)
I don't see any error message in the integration profile or log files. I am testing things on an account that is having this trouble, and the strange thing is that it can not log into application protected by OAM any more, but it can log into OAM console.
We use OID 10.1.2.3 on Windows, and OAM 10.1.4.0.1.
I searched in Metalink but didn't find anything helpful. Any help is appreciated. Thanks for your time.
Hailie

Pramod,
Thank you for your reply. Please see below my answers to your questions:
-> Do you see any pattern in the users (DN) that are unable to be displayed/login?
Yes I do see some pattern. There is one change on the problem user's dn - the "\" after the last name is gone.
Before: cn=smith\, john, cn=users,dc=abc,dc=com
Now: cn=smith, john, cn=users,dc=abc,dc=com
However I check in Active directory "\" is presented. In OID if I right click on cn=smith, john and try to delete it, I got a error message "LDAP: error code 34 - Error in DN Normalization". Is that caused by the missing of "\"?
-> Does ldapsearch on these users (with all attributes) show something (special chars, etc)?
ldapsearch on cn=cn=smith, john,cn=users,dc=abc,dc=com returns no objects:
$ldapsearch -L -D "cn=orcladmin" -w "*****" -h host -p 389 -b "cn=smith, john,cn=users,dc=abc,dc=com" -s sub "objectclass=*"
ldap_search: No such object
ldap_search: matched: cn=Users, dc=abc,dc=com
Ldap search on cn=smith\, john,cn=users,dc=abc,dc=com:
$ldapsearch -L -D "cn=orcladmin" -w "*****" -h host -p 389 -b "cn=smith\, john,cn=users,dc=abc,dc=com" -s sub "objectclass=*"
dn: cn="smith, john",cn=users,dc=abc,dc=com
uid: [email protected]
employeenumber: 916963
cn: smith, john
registeredaddress: 512
krbprincipalname: [email protected]
orclsamaccountname: ABC.COM$JSmith
sn: johnsmith
displayname: John
orclobjectguid: lJO0N+8H4UW/30yHukSfsw==
orclobjectsid: AQUAAAAAAAUVAAAAohxTYWIV3XFeP55cYjwAAA==
orcluserprincipalname: [email protected]
objectclass: oblixorgperson
objectclass: inetorgperson
objectclass: orcluserv2
objectclass: person
objectclass: orcladuser
objectclass: organizationalPerson
objectclass: top
obver: 10.1.4.0
-> Do you see the same behavior when you use any generic LDAP browser (Ex: Apache Directory Studio) instead of ODM?
I don't have Apache Directory Studio installed yet. I will try that later.
-> Does the changelog for the particular synch (for the affected users) show something?
Here is what I found in ActiveChgImp.aud
(weeks ago)
97426524 : Success : MODIFY : cn=smith\, john,cn=users,dc=abc,dc=com
(Recently change - The back slach after smith was gone, and "" showed up)
97469970 : Success : MODIFY : cn="smith, john",cn=users,dc=abc,dc=com
-> If login to OAM is possible, can the user modify his/her profile, and does it save the changes? If it does, can you try logging in to apps?
This user can log into OAM identity system, but when I click on "My profile" under "User manager", I got a error message "You do not have sufficient access rights".
If I log into identity system as orcladmin, I was able to modify it and save the changes. But in OID the user is still not displayed. Same error message. When I tried to add it as administrator, I could search on it, add it, but when I press "done", it didn't show up on the admin list. The users that can be displayed in OID can be added to admin list without a problem.
Thanks,
Hailie

Can not log on after successfull installation - SAP Netweaver Trial JAVA

Hello,
I have successfully downloaded and installed the NW Java trial. (NW_JAVA_700SP14_SR3.rar)
I can see in SAP MMC that all the services was started. At http://vjm:50000 I can see the default page.
Unfortunately I can not log on to any page that need SAP authentication (eg. User management, NW administrator),
but can log to pages which needs just basic browser authentication (eg: Web Service Navigator, UDDI client, System Information).
The portal also does not let me log on (http://vjm:50000/irj ).
When I get the standard SAP NW log on screen, after entering Administrator with the correct master password, simply the log on screen appears again (the password field is cleared). I also tried some incorrect user name / password just to check the difference. In that case I got the correct error message.
I installed the software with WMware, Windows 2003 server, allocated enough disk space and 1.6Gbyte RAM. The installation finished without errors. Prior, I installed the MS loopback too (tried without it too). In SAP MMC everything is green, only have an open alert in J2E 00 -> Services -> Security -> Aggregated Data -> Invalid session count "262 > 200 last reported value above treshold".
I am using the standard internet explorer coming with Win2003 server.
Tried the users: Administrator, SDM, Guest, ADSUSER. I know that the password is correct, because I don't get any error if I use it, just getting the log on screen back ...
Could anyone pls help me how can I log on to the system? Or is there any security trace file or log which could help me solve this problem?
I am desperately trying to install this trial, I completely reinstalled the software 5 times but still can not use it
Laszlo

Hi,
is your problem persisting?
CAVE: If you use a wrong user/pw combination > 3 times the account of the user may be locked!
try j2ee_admin instead of administrator or try adm together with your Masterpassword
Do you have to specify the users pw inside the installation procedure? In "normal" installations this has to be done.
If not the pw´s in the documentation of the previous answer`may fix your problem.
The sap mmc is irrelevant for user authentication.
Green means your system is running, nothing else.
kind regards
Tom

Admin can not log in after migration Teaming

Hello,
I did migrate Teaming 1.0.3 (SLES 10 SP2) to Teaming 2.1 (SLES 10 SP 2) on a different server according to information from this web site Novell Documentation
Everything worked with one exception admin account can not log in :(
The rest of the account works, but users are taken from LDAP.
I tried to use the old admin password as well as a new admin password set during installation Teaming 2.1
In catalina.out log I got:
WARN [http-9080-1] [org.kablink.teaming.module.authentication.impl.Aut henticationModuleImpl] - Authentication failure for zone 1: org.springframework.security.BadCredentialsExcepti on: Bad credentials; nested exception is org.kablink.teaming.security.authentication.Passwo rdDoesNotMatchException: Password does not match for user [kablink,admin]
I think that something has gone wrong with the admin account password after the migration but I do not know how to fix it.
I tried to change the password for the admin account directly in the database table but I do not know what hash algorithm is used by Teaming 2.1
Does anyone encountered such a problem?
How can I set a new password for the admin account directly in the MySQL database?
Best regards,
Piotr Szewczuk

Originally Posted by pszewczuk
Hello,
I did migrate Teaming 1.0.3 (SLES 10 SP2) to Teaming 2.1 (SLES 10 SP 2) on a different server according to information from this web site Novell Documentation
Everything worked with one exception admin account can not log in :(
The rest of the account works, but users are taken from LDAP.
I tried to use the old admin password as well as a new admin password set during installation Teaming 2.1
In catalina.out log I got:
WARN [http-9080-1] [org.kablink.teaming.module.authentication.impl.Aut henticationModuleImpl] - Authentication failure for zone 1: org.springframework.security.BadCredentialsExcepti on: Bad credentials; nested exception is org.kablink.teaming.security.authentication.Passwo rdDoesNotMatchException: Password does not match for user [kablink,admin]
I think that something has gone wrong with the admin account password after the migration but I do not know how to fix it.
I tried to change the password for the admin account directly in the database table but I do not know what hash algorithm is used by Teaming 2.1
Does anyone encountered such a problem?
How can I set a new password for the admin account directly in the MySQL database?
Best regards,
Piotr Szewczuk
I **think** that hash is specified in the installer.xml file. Try also to post your question on the kablink forum: Installation, Configuration, Customization

Can not log in another Blackberry ID in the same BB device

Can not log in another Blackberry ID eventhough I have already sign out(and wipe out data automatically) previsous
Blackberry ID from the same the device.
Please someone kindly assist ASAP.
PS. Do I need to deassociate both via device & email?

kkawin45 wrote:
Can not log in another Blackberry ID eventhough I have already sign out(and wipe out data automatically) previsous
Blackberry ID from the same the device.
Please someone kindly assist ASAP.
PS. Do I need to deassociate both via device & email?
Hello kkawin45
Welcome to BlackBerry Support Forums
You cannot use multiple BlackBerry ID on your BlackBerry 9900 at a same time ! On BlackBerry 7 devices BlackBerry ID is deep integrated with our device . If you want to use a new BlackBerry ID then perform a security wipe , while wiping be sure to Mark everything ( User Installed application , Emails ) but after a full backup .
Refer to this KB Article for help :
KB26694 : How to change the BlackBerry ID on a BlackBerry PlayBook tablet or BlackBerry smartphone
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

I can not log into iCloud

Please help - I've upgraded to ML 10.8 (and also 10.8.1) and i can not log into icloud.
I get an error saying "You can not log in at this time". I have no hair left on my head because I've pulled it all out!
Now, there are many published fixes for this, but NONE work. I've tried everything I can find:
Yes, I have an AU and US apple ID, and both dont work
I installed ML from a fresh disk wipe + install. No baggage from previous OS's.
Everything is standard, no tricky fixes or apps
No Little snitch installed
Have deleted the ~/Library/App Support/iCloud folder
Have deleted any preference files
Have opened up the permissions on the ~/Library/Caches/iCloud folder
Have reset keychain
Have deleted all references of any @me or @apple accounts
Have re-installed the ML OS from a DIFFERENT bootable USB stick
No proxies, SOCKS, or mods to network
Plain old home WIFI network, never had a problem
Have icloud successfully set up at work (QC 2.8GHZ Mac Pro 2010), on my iPhone, iPad and Macbook Pro - Zero issues
The mac having problems is a 2008 iMac, Core2Duo 2.8ghz Intel w 4gb 1067mhz ram) - Runs well, use for design.
Is it a problem with the iCloudHelper process not having sufficient permission to write to the iCloud user DB? or the Accounts folder?
Have looked into console, and when I try and log into iCloud, I get these three errors. Same every time, no matter which apple ID account you use:
1: AOSKit ERROR: (System Preferences[352]) AOSKC ([email protected]): Failed to store key, couldn't add kc item, error 100013 (service=iCloud, dsid=146089737)
2: AOSKit ERROR: (System Preferences[352]) AOSKC ([email protected]): Failed to store account info key (dsid=146089737).
3: AOSKit ERROR: (System Preferences[352]) Failed to store account info for appleID=[email protected]
Please help! Is this an incompatibiloty with the iMac problem, or a ML problem?
Much appreciated
Rick

Where EXACTLY are you trying to log in to it?
Through your web browser at iCloud.com?
Or through the iCloud system preferences pane on your Mac?

After upgrading to Snow Leopard, I can not log into the computer. What Can I do?

after upgrading to Snow Leopard, I can not log into the computer. What Can I do?

SqueezeAce wrote:
after upgrading to Snow Leopard, I can not log into the computer. What Can I do?
Stick the 10.6 disk into the machine and reboot holding the option/alt key down on a wired/built in keyboard.
On the second screen, under the Utilities menu is a Password Reset, use it.
Step by Step to fix your Mac
What this will do is reset the password and the user account permissions in the process.
You might have problems with Keychain afterwards, to fix that.
https://support.apple.com/kb/HT1631 https://support.apple.com/kb/TS1544
If your still having trouble, look through these User Tips
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/?p er_page=50

I have a problem in imessages I can not log on

I have a problem in imessages I can not log on and update through the application.Every time you logon work shows me a message saying "The server encountered an error processing registration. Please try again later"

This could be a complicated problem to solve, as there are many possible causes for it. Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
Before proceeding, test on another network, if possible. That could be a public Wi-Fi hotspot, if your computer is portable, or a cellular network if you have a mobile device that can share its Internet connection. If you find that iMessage works on the other network, the problem is in your network or at your ISP, not in your computer.
Step 1
Check the status of the service. If the service is down, wait tor it to come back up. There may be a localized outage, even if the status indicator is green.
Step 2
Restart your broadband device and your router, if different. You may have to skip this step if you don't control those devices.
Step 3
From the menu bar, select
 ▹ About This Mac
Below the "OS X" legend in the window that opens, the OS version appears. Click the version line twice to display the serial number. If the number is missing or obviously invalid, take the machine to an Apple Store or other authorized service center to have the problem corrected.
Step 4
Back up all data, then take the steps suggested in this support article.
There are five steps in that article. Please take all of them. If you don't understand some of the steps or can't carry them out, ask for guidance.
Step 5
From the menu bar, select
 ▹ System Preferences ▹ Network
If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If any proxy options are selected, make a note of them and then deselect them. You don’t need to change the bypass or FTP settings. Click OK and then Apply. Test. The result may be that you can't connect to any web server. Restore the previous settings if that happens.
Step 6
Select from the menu bar
 ▹ System Preferences… ▹ Flash Player ▹ Storage
and click
Block all sites from storing information on this computer
Close the preference pane.
Step 7
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
If iMessage worked in the guest account, stop here and post your results.
Step 8
Boot in safe mode and log in. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. After testing, reboot as usual (i.e., not in safe mode) and test again.
If iMessage worked in safe mode, but didn't work when you booted out of safe mode, stop here and post your results.
Step 9
Reset the NVRAM.
Step 10
Reinstall OS X.
Step 11
If none of the above steps resolves the issue, make a "Genius" appointment at an Apple Store, or contact Apple Support.

Can not make network user accounts

After upgrading from 10.6.8 Server to 10.8 and installing server tools, I can not make network user accounts. All of my old network user accounts migrated to the new OS and work properly, I just can not seem to make new accounts under 10.8.
Under 10.6.8 I would log into Workgroup Manager as diradmin and I could pretty easily make new users.
Under 10.8.2 I launch the server app and click on "users". The addition (+) symbol in greed out for making new users. I can make local users via System Preferences, but I can not see any way to change local users to network users via either System Preferences or the Server app.
I have logged into the server app using a local administrator account, the diradmin account, and the root account. None of the accounts allow access to create new network users (addition symbol is greed out).
Is there a trick to making network users in 10.8 that I am missing?
(as an aside, I have noticed I can log into Directory Utility as diradmin and can view the node with all my network accounts. It seems like I might be able to manually create a user account this way, but I'm not quite sure how to make the user record)

Open Directory service is started and functional for all the pre-existing network user accounts that were made under 10.6.8 and earlier. I just can not seem to create new netowork user accounts.
I followed the steps on this page and managed to make a user record that appeared as a network user in the Server app, but I still can not seem to log in under the user I made in this fashion (dscl command via terminal).
http://www.deadmarshes.com/Blog/20111105010130.html

Can not edit a User Account

Hello,
i have a Problem with the Server APP on my MacMini. I had to renew my Domain Name. Everything works good (DNS, Open Directory). But now i can not edit a User Account, or apply a new User on my Server.
The Plus / Minus Button is grey, and it is not possible for me to edit something under this service.
I need Help, Please

Same problem here on an Intel iMac running Mac OS X 10.4.11 - would like to delete an outdated user account (standard), but would like to keep a safety copy of all files before deleting.
When using Accounts in System Preferences - and choosing "save contents of user's home folder to folder 'deleted users' " ... all I get is the endlessly spinning wheel along with the spinning beach ball instead of the mouse curser.
Very annoying...
Is there any way around the Delete Immediately solution ?

HT4798 I can not log into my computer to download an app.   I wrote it down but it is not working. I can not find a way to access it or reset it? help

I can not log into my computer to download an app. my password is not working. i wrote it down but it is not working.
is there a way to reset this or have it emailed to me? this is different from my apple ID password.

Only you have the password. No one can email it to you.
Forgot Your Account Password
For Lion, Mountain Lion, or Mavericks
    Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     When the menubar appears select Terminal from the Utilities menu.
     Enter resetpassword at the prompt and press RETURN. Follow
     instructions in the dialog window that will appear.
     Or see:
       Reset a Mac OS X 10.7 Lion Password
       OS X Mountain Lion- Reset a login password,
       OS X Mavericks- Solve password problems,
       OS X Lion- Apple ID can be used to reset your user account password.
For Snow Leopard and earlier with installer DVD
     Mac OS X 10.6- If you forget your administrator password,
     OS X- Changing or resetting an account password (Snow Leopard and earlier).
For Snow Leopard and earlier without installer DVD
    How to reset your Mac OS X password without an installer disc | MacYourself
    Reset OS X Password Without an OS X CD — Tech News and Analysis
    How To Create A New Administrator Account - Hack Mac

Can not log on user@domain

Similar Messages

Maybe you are looking for