Can not login to my EA4500 router's web based setup page

Hello All-I have a EA4500 router. I attempted to login to my router' web based setup page late last year using my IE11 browser.I received an error message stating that I cannot login with that browser. I need an updated IE,Google Chrome or Mozilla Firefox to be able to visit that site. I attempted about 3 more times and received the same error message. I switched to Google Chrome that worked very well up to tonight(3/31/2004). Cisco web page is preventing me from opening my setup page. I believe I should be contacting Customer Support about this problem but none of their support options cover this problem. Thanks in advance.

IE 11 isn't compatible. Use Google Chrome if you don't want to uninstall IE 11 and go back to IE 10.
You can force the local login by disconnecting the cable from the router's internet port and then logging in.
If the Smart Wifi is giving you trouble and you don't mind reconfiguring your router. Then you could disable Smart Wifi services.
To disable Smart Wifi Services:
Reset the router to factory defaults (recessed button for 30 seconds or through the router UI)
For setup choose "I want to skip Setup and configure my router manually"
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

Similar Messages

WRT54GX4 - Difficulties Accessing the Router's Web-Based Setup Page

WRT54GX4 - Difficulties Accessing the Router's Web-Based Setup Page.
I have tried everything posted to the forums and the Knowledge Base for several weeks now with no luck. I can power push router and gain access to router's web-base interface but only for a few minutes than it quits loading part way through and or does not load at all. If I turn off the wireless side I can access the router at will with no problems. My warranty is almost over. I am at my wits end. I would like to get it replaced under warranty if I can. (^8
Solved!
Go to Solution.

Thank you for your recommendations peanuts. (^8
I bought the router back in December 10, 2006.
I updated the firmware to v1.00.20 back in June 2007. After I did a successful firmware upgrade I reset the router to factory default settings and then reconfigured it. It has worked Ok till a couple of months ago.
I have read everything I can find here on the support forum and in the Knowledge Base several times.
I have tried changing all the different settings to the different recommendations posted here and in Knowledge Base with no success. Each time I would do a long reset back to factory defaults, let it soak for a few hours and then make one change at a time and let it soak.
I have been monitoring 6 other wireless AP(s) around me (none mine) for a couple of months too. None of them are strong enough to connect to. My SSID is different from them. I have tried all the channels. My router is passworded and MAC'd.
It is looking like it is time to call support and try to get a replacement under warranty while it is still in affect.

Error in router's web-based setup page (WRT54G V5)

Hi,
My router’s web-based setup page is unable to load fully.
There seems to be an error with some document.setup.save file.
I have tried to reset my router but the router’s web-based setup page is still unable to load fully.
Please help.
Thanks.

Try Internet Explorer, it usually works.
JavaScript must be enabled.
Temporarily turn off your computer's software firewall, and see if that corrects your problem.
Hope this helps.

Can't Access Router's Web-Based Setup Page

I have tried this: http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=3676
Entering in the default IP and my actual IP address does not work, I'm trying to find out what my security key is.
Solved!
Go to Solution.

When you Hardwired your computer to the Router, on your computer click on Start - Run - CMD and click ok, now in the Command Prompt window type "ipconfig" and hit enter.. Note down the Default Gateway IP address.
Open IE on your Computer and in the address bar type http://default gateway ip and hit enter,when prompted for the Username and Password, Leave the Username blank and type "admin" as a password and click Ok. (If you have changed the Router password, then you need to use that password to login to the Setup page of your Router).
Once you login to the Router setup page, click on the Wireless tab and then click on the sub tab "Wireless Security" and in the window you will find out your security key.

Unable to access the Router's Web-Based Setup Page

Hey, I found a little problem when I tried to change the configurartions to my Linksys WRT54GS ver- 6.0 router. Problem is that I can not acces to setup, nor can I connect to Internet trough wire. Can somebody help me with my problem?
Pasi

To view the router's web pages:
You do not need an Internet connection. The router's "web pages" are built into the router.
Use Internet Explorer, it usually works.
JavaScript must be enabled.
Use a computer that is wired to the router.
In the non-working computer, temporarily turn off your software firewall.
Point your browser to 192.168.1.1 , then login to your router. Your user name should be left blank. Your password is "admin" (with no quotes), unless you changed it.
If you are using Zone Alarm, right click on the ZA icon in the system tray (lower right corner of screen) and then click "Shutdown ZoneAlarm", and see if this fixes your problem. If this does not work, try the following with Zone Alarm: Open the ZAISS control center, go to Privacy, then temporarily turn off Ad Blocking and Cookie Control, and see if that fixes your problem.
If you are using Noton Internet Security with the Add-on Pack, be sure to turn off the Pop-up Blocker, and the Ad blocker. Some users have reported that they needed to uninstall the entire Norton Add-on Pack.
If you cannot get anything at 192.168.1.1 then perhaps this is not your router's address. Go to "Start" > All Programs > Accessories > Command Prompt.
A black DOS box will appear. Type in "ipconfig" (with no quotes), then hit the Enter key. Look at the "Default Gateway". Is it 192.168.1.1 ? Point your browser to the "Default Gateway", then login to your router.
If the above fails, disconnect your modem from the router, and try again. If this corrects your problem, then most likely you have a "modem-router" rather than an ordinary modem. Report back with this problem, and also state the make and exact model number of your modem (not the router).
If all of the above fails, power down your entire system, unplug it from the wall, wait one minute, then power up and try again.
If all of the above tips fail, then reset the router to factory defaults: Power down the router and disconnect all wires from it. Wait one minute. Power up the router, allow it to fully boot (1-2 minutes), then press and hold the reset button for 30 seconds, then release the button and allow the router to reset and reboot ( 2-3 minutes). Power down router. Wait one minute. Connect one computer, by wire, to a LAN port on the router. Boot up system. It should work.
If the reset does not fix your system, then you need to download and install (or re-install) the latest firmware for your router. After the firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.

WRT54G V8 Can't connect to web based setup page?

Earlier I reset my router and was able to use 192.168.1.1 to visit the web based setup page while trying to re-establish a home network now that I have a new computer using Windows 7 which can not use the easylink advisor. I was able to get on the page to update my SSID and WEP key. But when my wireless devices were still having problems connecting to the internet I tried to go back to the page and found that I can't get it to connect, though my desktop is able to connect to other internet sites just fine.
Does anyone know what i can be doing wrong? I am using Verizon DSL. I was able to ping the router and all tests showed that it was connected fine, yet I still cannot get on the setup page and my laptop still can't connect to the network. I have tried resetting the router again, and still nothing. And yes, I have gone through numerous power cycles. I also tried going though the network map on my computer, but the computer says it was unable to create a map for it even though at the time I had it listed as a Home network.
Message Edited by TaiShan on 01-03-2010 07:06 PM
Solved!
Go to Solution.

Wireless connections to 192.168.1.1 often fail. When accessing the router setup pages, always use a computer that is wired to the WRT54G.
If the above does not solve your problem, then here are my other tips for viewing the router setup pages:
You do not need an Internet connection. The router's "web pages" are built into the router.
Use Internet Explorer, it usually works.
JavaScript must be enabled.
Use a computer that is wired to the router.
In the non-working computer, temporarily turn off your software firewall.
Point your browser to 192.168.1.1 , then login to your router. Your user name should be left blank. Your password is "admin" (with no quotes), unless you changed it.
If you are using Zone Alarm, right click on the ZA icon in the system tray (lower right corner of screen) and then click "Shutdown ZoneAlarm", and see if this fixes your problem. If this does not work, try the following with Zone Alarm: Open the ZAISS control center, go to Privacy, then temporarily turn off Ad Blocking and Cookie Control, and see if that fixes your problem.
Some Zone Alarm users have reported that adding 192.168.1.1 to their list of "trusted" addresses fixed the problem. This trick might also work with other firewalls.
If you are using Noton Internet Security with the Add-on Pack, be sure to turn off the Pop-up Blocker, and the Ad blocker. Some users have reported that they needed to uninstall the entire Norton Add-on Pack.
If you cannot get anything at 192.168.1.1 then perhaps this is not your router's address. Go to "Start" > All Programs > Accessories > Command Prompt.
A black DOS box will appear. Type in "ipconfig" (with no quotes), then hit the Enter key. Look at the "Default Gateway". Is it 192.168.1.1 ? Point your browser to the "Default Gateway", then login to your router.
If the above fails, disconnect your modem from the router, and try again. If this corrects your problem, then most likely you have a "modem-router" rather than an ordinary modem. Report back with this problem, and also state the make and exact model number of your modem (not the router).
If all of the above fails, power down your entire system, unplug it from the wall, wait one minute, then power up and try again.
If all of the above tips fail, then reset the router to factory defaults: Power down the router and disconnect all wires from it. Wait one minute. Power up the router, allow it to fully boot (1-2 minutes), then press and hold the reset button for 30 seconds, then release the button and allow the router to reset and reboot ( 2-3 minutes). Power down router. Wait one minute. Connect one computer, by wire, to a LAN port on the router. Boot up system. The router should work, but you will need to setup your router again from scratch. If you saved a router configuration file, DO NOT use it.
If you still have trouble, then you need to download and install (or re-install) the latest firmware for your router. After the firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.
Message Edited by toomanydonuts on 01-03-2010 10:54 PM

(WRT160N V3 router) Issue connecting to web-based setup page

I am currently having 2 issues with my router. The first issue is the fact that I can not connect to my router's setup page (192.168.1.1). When I type the ip into my browser I get an error saying unable to connect to it. I have an internet connection and can connect to other websites perfectly fine, so the only issue I have is the setup page.
The second problem is my wireless connection. Over the past few days, I have started to experience a major ping increase in online games, and a speedtest (and pingtest) showed an issue with my wireless connection. Download speeds are normally 19-20mbps and upload speeds are normally above 6-7mbps. Recently the speeds have become about .39mbps and 2mbps respectively. Unfortunately because I can not connect to my router's setup page I can not modify any configurations that would allow me to possibly pinpoint the issue with the wireless connection.
tl;dr: Can not connect to my router's setup page in order to modify configuration settings to speed up my wireless connection which has been having issues.
Edit: Hardwired connections to the router are getting about 28mbps download as they should be. These computers also can not connect to the setup page.

You'd have to reconfigure your router again.
Setting-Up a Router with DSL Internet Service
Setting-Up a Router with Cable Internet Service
Dont forget to set up the security as well.

Web Based Setup / Not loading properly

I'm having a problem with my WRT54G V6 (wireless router). It happened few times since i got this router. (A friend of mine also have a wireless router from Linksys, i don't know the model).
We both have the same problem:
- After running for a while, the router doesn't seems to work anymore. I can't access any web page or other things, so i come to my desktop (WIRED) to the router, try to access the Web Based Setup page, and it BARELY LOAD! The HTML page is sloppy, like if it never finish to load or even worse: all tabs have different font size and colors.
- When it happen, i have no choice to remove the power cable, then put it back and everything get back to normal.
What could cause that?
I've upgraded the firmware many times (even did it this morning with v1.02.0, but i'm sure i'll have the same problem again and again).
My router is not submitted to power fluctuation, it's plugged to an UPS.
THANKS!

Hi… Reduce the MTU on this router to 1365. If you re-flash or upgrade the firmware make sure you reset this router to factory default settings and reconfigure it.

WRT310N No Way To Setup and Configure Router. CD Setup No, Web Based Setup No

Purchased New WTR310N yesterday. LESA does not run from CD. Web based Setup Page Will Not Load. Did two 2 hr Remote Setup sessions so far with Linksys Techs in Phillipines and India. After 1st Tech was done, nothing would connect to router. Tech tried to setup our 4 PCs by setting up one as a server and using ICS to setup the rest. Tech disabled TTP, DHCP, ete everything that works as a home network. I think Tech also setup a password and user name on Router without telling me. I had to spend 2 hrs using Vista and XP Wizards to setup a router network, both wired and wireless. Since Router is not configured yet can only access unsecured wireless networks. But 2 wireless printers do not work yet. Tech today was excellent in India. She reinstalled my Linksys USB Wireless Adapter that I use to print with. Still not printing, and green light not coming on, on USB Adapter. Tech managed to upgrade Router Firmware, but could never get web based router setup to load. Got the password and user name box to show up once, but admin and blank username does not work. My XBox 360 installed in 15 seconds and is fast so Router working fine. So need help with getting Linksys USB Wireless Adapters to access wireless printers and somehow get router admin pages to load so I can turn on WEP and type in our WEP Code. Last router was Linksys 54G, all worked fine for years, then quit working so got new router. Any ideas before I try calling Tech Support again, thanks.

As you want to make the network secured but the admin password is not working....You have to reset the router and re-configutre it again...
Press and hold the reset button for 60 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
If your Internet Service Providor is Cable follow this link
If your Internet Service Providor is DSL follow this link

Is there a way to access the web-based setup for my router if I cannot access the internet?

Okay, I need to change the ip address settings on my router. I have a WRT54G Wireless router. I cannot access the internet on my computer connected to the router, and do not know how to change the router settings without accessing the web-based setup page. So, back to my question. Is there a way to access this page if I cannot connect to the internet?

On the back of the router is a small reset switch. Using a paper clip or other small item, press the switch in and hold it for a few seconds. This will reset the router to the default IP address of 192.168.1.1. Enter that address in your web browser, and be sure your computer is attached to the router by an Ethernet cable. Don't attempt to do this using the wireless connection.
Once you have reached the web configuration utility you can change the DHCP settings.
To give your PC a static IP address you will need to open your network connections panel and, assuming your using Windows XP, make the changes from dynamic IP to static there.

Can not login access manager

mail server version is JES messaging Server 6 2005Q4 :
My Access Manager:http://hostname:8080/amserver
last week, i login access manager, under the web label or configuration label�F
in "ldap" item�Ci add new dc=xx,dc=xx,dc=xx�C
then save configuration.
but after that i can not login access manager.
when i user admin login,it print:"
Authentication failed".
what should i do to restore access manage?
thanks!

javatoall wrote:
Hi,
I login Access Manager, access sample "realm" -> Authentication->
Advance Properties -> User profiles and then I choiced "Dynamic with user Alias".
Then I only configure JDBC authentication with mysql database that I don't used ldapservice.
When I created a one new user in MySQL, I can login into web application that i security as "sample.war" successfull but new user don't right access resource that i protected before.
When i login access manager with amdmin user, I can not find user that i has been created it in MySQL database. t
When the users are created through the dynamic profile, the default cn/sn are set to "default" , after creation you need to login to amconsole as amadmin and change/add proper values for these attributes.
Alternatively you can set the protected resource's policy subject to Authenticated users. This will work but not sure will meet your requirement
>
When i login access manager console with new user, it login successful, and view Profile of new user that I has been created.
Can you tell me How to manage new user that I has been new in MySQL by Access manager console ?
I want to configure access proteced resourse for that user. How to configure that ?
read above use the authenticated users subject
Thank for every help.
VinhND.

Can not login to Oracle Application Express after upgrade to 3.2

I installed oracle database express and then I upgrade APEX to 3.2 on it. I got the login page but I can not login by using any account, like SYS, SYSTEM. From the document, internal ADMIN account should exist but I did not see it from dba_users table.
Thanks,
Julie

HI Don,
I did run apxchpwd.sql to change the Application Express ADMIN user password. Then I invoked http://mymachine:8080/apex and got the Application Express login page. I put ADMIN in workspace and ADMIN in Username and the new password. But I still cannot login. I also tried http://mymachine:8080/apex/apex_admin page login. I typed ADMIN as username and the new password. Then I clicked on Login button. Nothing happened. No error message.
Any idea?
By the way, what does apxxepwd.sql do?
Thanks,
Julie

Apple tv 2 problem: I can not login with my ID account!!!!!

apple tv does not login with my ID! Do you have a solution? Since a few weeks I can not login in with my password...
I tried everything:
- re-starting apple tv.
- login on macbook with my apple ID with new password

Signal Strengh on WiFi was great (its a new Apple Time Capsule and has to be reset often). Checked the internet connectivity on other machines too (incase that was inop). I checked the network first as that is typically a impediment to all other things working prior to my previous comment. I logged in to iTunes and MobleMe to see that my password was correct and working. hmmm.
I reset the Apple TV next and again changed my iTunes password on my laptop, then ran a network test (which needs a itunes password to work). Network check was successful and I am logged back in.
Now it says...."Netflix is currently unavailable. Try again later".
geez.

I have an apple id but ı can not use it for sign in to itunes connect account while publishing my ibook document. Why ı can not login? What can ı do to figure out this problem?

I have an apple id but ı can not use it for sign in to itunes connect account while publishing my ibook document. Why ı can not login? What can ı do to figure out this problem?

As note already on the iBA forum [ AppleID for ibooks publishing ], you need two IDs. You can't use your developer ID.
If you already signed up for books with that ID, you need to talk to Apple to straighten things out.

My computer is off and set up on Japanese. I can not login anymore because I type the password in English but the keyboard was set up last in Japanese language.how can I change the language by using the keyboard only so that I can write in English my pass

Hi
My computer was shut down. It was set on Japanese Hiragana language before shutting down. Now I want to login with my password in English. Yet, teh keyboard was set in Japanese and thus, I can not login anymore. How can I reset/change from Hiragana Japanese mode to Englsih ( US) with some shortcuts on my keyboard?
thank you

Try Apple/Command + space.
For the future, go to system prefs/accounts/login items and check the box for Show Input Menu on Login Screen.

Can not login to my EA4500 router's web based setup page

Similar Messages

Maybe you are looking for