Can not make a phonecall to belgium anymore
When i want to phone from my laptop suddenly it says "problem with playback device"How di I solve this problem....It was never like that beforeThank you
In your online a/c set ‘Allow on Call abroad and Premium rate’ under Manage this device / Usage Controls.
Similar Messages
-
I updated my iPhone device for thw 7.1.1 update that was avalibe on 4-23-2014. when I did this my phone is prompting me to connect to itunes on my computer. My computer is no longer working and I can not make or recieve calls on my phone.
Sounds like the device is in recovery mode. You will need to restore the phone. See this support document for instructions. http://support.apple.com/kb/HT1808
-
I have two seperate itunes accounts on two seperate devices and i can not make an itunes purchase on either one. When signing into the account it ask for the answer to security questions. I have NEVER answered a security question for these accounts. Each time it is a different set of questions. This has only happend since the original devices have been replaced/upgraded. How do I fix this? There is money in each account and both have recieved itunes giftcards for christmas that they are unable to use!
sailsalot wrote:
I have a new ipad and have used the community to answer questions for myself. Your help has been great! I don't know how you got my sailsalot name from my Skype account but I signed in with you as "gags76" and got help with my new ipad. I discovered I used a different Apple id and password on my ipad from my computer (imac) and changed that. My e-mail is Could you email me if there is something I should do at my end. I have to use itunes to sync with my ipad so I have been going back and forth between the two. Should I sign in with my proper Apple id on my ipad?
Yes -
All- I get this message ("iPhone can not make or receive calls. Restore from iTunes" (happend once while on airplain mode and now once while in wifi only area, out of cell range)). iPhone 4. Newest OS. Never happened with old OS! Cycling phone on/off does not help. Ignoring message causes phone to cycle off then on. After first time this happened, I restored. Six days later...same problem! Clearly a new fix is necessary. Suggestions?
I have not tried that...I will look up the process so that I can do it correctly (and still transfer all of my files, contacts, etc). Any suggestions? What is the advantage of restoring as a new device..is this more akin to a complete wipe of a hard drive?
-
I have one folder on an XSAN that one machine can not make changes to. Whenever I try to duplicate or copy a file in this folder I get 'The operation can’t be completed because an unexpected error occurred (error code -50).'
The permissions are fine, and I have trashed the finder plist and reset the NVRAM.
Anyone have a answer?
ThanksTips I received so far (thanks to A-Mac via Twitter http://www.a-mac.nl and Remco Kalf http://www.remcokalf.nl/)
- make sure you have at least 10% of your harddisk in free space (I had only 5%).
- do a PRAM-reset (http://support.apple.com/kb/ht1379)
- perform a hardware test (http://support.apple.com/kb/HT1509)
- make a complete backup (with for example Carbone Clone Copier, see http://www.bombich.com/)
- after complete backup: use diskwarrior (boot from Diskwarrior DVD, first perform diagnostics, then perform "Rebuild" which rebuilds your file directory).
So far I only cleared up some space on my HD, and already the problem occurs less.
Still, I will go through the other tips too.
(will post progress) -
I can not make a "Byte Code Adapter Installation"
When I open meets both paragraphs in step Managed System Configuration is somewhat obscure situations that do not allow the automatic configuration Introscope agent and Introscope Manager
Please help to resolve a number of questions that might help me complete the setup :
1. Why has the status of Enterprise Manager : <No Enterprise Manager configured> ( see picture)
I set up Enterprise Manager in accordance with the installation instructions and complied with all the setting items . Since without any configuration can be associated with the appearance of this status ?
2 . Why Server Node is empty detail settings ?
JDK Location:
Enterprise Manager Host:
Enterprise Manager Port:
Introscope Agent Name:
Introscope Agent Profile:
Autoprobe Directives:
Wily Version:
Introscope Agent Version:
Introscope Agent Log Location:
3 . What a mistake ($ MC: DIAG_WILY_MSG: 032 : L), which appears when I click configuration "Configure Introscope Agent Setup ...", and what it can be linked ? ( see picture )
And the last question , which is also linked to the process of automatic configuration and refers to a phrase from the instruction (Introscope Version 9
Installation Guide For SAP July 2012) points out "Automated Installation of the Introscope Agent via SMD"
there is such an item:
2 . Deploy ISAGENTJ5 *. SCA which is the Introscope Java Agent 9 with SDM to Solution Manager. You may need to deploy also ISAGENT *. SCA which is Introscope Java Agent 8.
However, nowhere does it say where exactly ( on what the absolute path ) I must perform unloading and then what to do with this dischargeThe problem was resolved a small manipulation - on stage Basic Configuration,
point 3 "Configure CA Introscope"
I forgot to add to the list of CA Introscope Enterprise Managers link to my manager.
Thus it is necessary to take into account that the path should be correct (usually for linux - /usr/sap/ccms/apmintroscope) and the directory should be applied appropriate privileges.
Then in paragraph "Byte Code Adapter Installation" - there are all the necessary data, and it starts to work correctly -
Hello. Having a problem with skype. i am online, all buttons work, however i can not make a video call the button simply doesnt work. Messages works. voice calls works. Please help.
Sounds like you need to contact skype.
-
I need to know how to fix my iphone4 I was playing one of my games and a up date poped up I pushed on the up date when it restarted all I have is a white screen with four black dots and all the driffent laughes and a i with a blue circle around it I can not make any calls or get any calls or any thing
I don't have apps on my phone so i can;t do anything
-
I have problem with concoction i can not make call or sms
I have problem with my i phone 5 i can not make call and sms do please help me
I think you don't understand the purpose of this forum. This is a user-to-user support forum. You're not talking to Apple. You're not talking to your cellular carrier.
One last time and then I'm done:
You need to call your cellular carrier and get this sorted out. No one here can help you. -
Can not make a picture but no white line in pdf
Can not make a picture but no white line in pdf
There are many threads on same topic, please follow the suggestion mentioned here :
https://forums.adobe.com/message/6486790#6486790
Thanks,
Sanjit -
Hi people!
is mandatory to have a credit card to my account? and if I do not have a credit card I can not make a Itunes Account?Hi,
In addition to Roger's post, you will need a credit or debit card at a future date if you want to buy from Istore.
You can use itunes gift cards that have been purchased from external sources. Card needed if to want to buy gift card from Istore.
Jim -
Need to add condition to a template and can not make it work.
I am trying to add a condition to a template and can not make it work. Mainly because I am new at this. I have a field that needs to have a condition set. The field is LTD. The maximum value is $233.00. If the amount is less the 233, that value is used. If it is over 233 then 233 is used. So, if LTD is greater then 233.00 then 233.00 else LTD.
Can anyone help me write this for a Word BI Publisher Template. I need this report now but can't go to class until later this year.
Thanks,
RickReplace LTD with the correct element name.
<?choose:?>
<?when: LTD > 233 ?>233<?end when?>
<?otherwise:?><?LTD?><?end otherwise?>
<?end choose?> -
My device icon in the left column does not appear. so, I can not make the sync.
my device icon in the left column does not appear.
so, I can not make the syncDevice Not Recognised
For PC > http://support.apple.com/kb/TS1538
For Mac > http://support.apple.com/kb/ts1591 -
Can not make network user accounts
After upgrading from 10.6.8 Server to 10.8 and installing server tools, I can not make network user accounts. All of my old network user accounts migrated to the new OS and work properly, I just can not seem to make new accounts under 10.8.
Under 10.6.8 I would log into Workgroup Manager as diradmin and I could pretty easily make new users.
Under 10.8.2 I launch the server app and click on "users". The addition (+) symbol in greed out for making new users. I can make local users via System Preferences, but I can not see any way to change local users to network users via either System Preferences or the Server app.
I have logged into the server app using a local administrator account, the diradmin account, and the root account. None of the accounts allow access to create new network users (addition symbol is greed out).
Is there a trick to making network users in 10.8 that I am missing?
(as an aside, I have noticed I can log into Directory Utility as diradmin and can view the node with all my network accounts. It seems like I might be able to manually create a user account this way, but I'm not quite sure how to make the user record)Open Directory service is started and functional for all the pre-existing network user accounts that were made under 10.6.8 and earlier. I just can not seem to create new netowork user accounts.
I followed the steps on this page and managed to make a user record that appeared as a network user in the Server app, but I still can not seem to log in under the user I made in this fashion (dscl command via terminal).
http://www.deadmarshes.com/Blog/20111105010130.html -
I can not make delta load for some component of public sector management
Hello All:
I´am using these three data source 0PU_IS_PS_31, 0PU_IS_PS_32 and 0PU_IS_PS_42 and I realize that I can not make delta loads. When I make the full load everything is correct even when I made the delta, the problem is that the Delta load is not extracting any new data or changed data.
Do you have any idea to fix this issue?
Thanks
Message was edited by: Víctor OliveraHello Victor,
As u have already tried the delta load,I assume that u have already done the init load too.As system will not allow u to do delta load without doing an init load first.
The first datasource u talked about..31..it needs new records created in table FMIOI table.
What happens is..if u run a delta load immediately after an init load,there might not be new or changed records created in the system..therefore there arent any records in the delta queue.
Could u try creating some commitment document transaction data,so that records get added in FMIOI table.Then see if the delta queue for this datasource shows any records.
Links to BC pages for these datasources are below..
http://help.sap.com/saphelp_nw04/helpdata/en/1a/8c425e8afe11d496d80000e835339d/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/1a/8c42618afe11d496d80000e835339d/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e1/46a53ec5f0c0428fa8b9cfcdcd9fcd/frameset.htm
Note that for 42 datasource..page says that delta update is not supported(though it does talk about updating delta queue).
For 32 datasource source tables are FMIFIIT and FMIFIHD.
For 42 datasource table is FMBDP.
cheers,
Vishvesh
Maybe you are looking for
-
I select my photos from iPhoto, go to toolbar, click share and email, photo is uploaded onto email screen and I add photo info and type in my email address, click send at the bottom of page and it after a minute or two, a pop up appears with the
-
Regd. Error in Adapter module for IDOCxml to flat file conversion
Hi Champs! I am using PI 7.1 and i am trying out the blog for direct conversion of IDOC xml to flat file and vice versa. /people/william.li/blog/2009/04/01/how-to-use-user-module-for-conversion-of-idoc-messages-between-flat-and-xml-formats has anyone
-
Hi I'm proting some of my plugins vom MacOS X to Windows. Now I have a big problem with code witch makes use of the PluginGroup Suite After the folowing code. sAIArt->NewArt( kPluginArt, kPlaceInsideOnTop, parentArt, &pluginArt ); sAIPluginGroup-> Us
-
How do I re-establish my verizon 3g account?
I am attempting to re-establsih my 3g account with Verizon. However when I access the menu "Cellular Data" and View Account I receive a message that says ""Session Expired". Verizon is at a loss as to what to do. Also in the "General Option" under "
-
Update to ML kills Large IMAP Account Performance
I'm using Mail.app in Mountain for two Gmail IMAP accounts (one personal, one work). I have both accounts set up to download and keep a local copy of everything. On my old 2009 MBP with SSD this setup gave me lightning fast local searches of my entir