Can not make outgoing calls???

When I dial out, the E for edge network disappears and I can not hear a ring. The iphone makes the call but the it won't ring and I can't hear anything when the person picks up. Right now my iphone has no calling function whatsoever. When someone calls me and I pick up they I can not hear them and they can not hear me.

Hey cmilz,
Has the iPhone ever been able to make and recieve calls? Does it work with the headset?
Try restoring the iPhone.
http://docs.info.apple.com/article.html?artnum=305744
Jason

Similar Messages

  • Can't make outgoing calls but receives fine (I believe it's the ISP)

    Hi.A small company were maintaining that uses a uc500 on a dedicated voip line suddenly can't make outgoing calls.This has occured on another two occasions when they were using a different ISP and It was due to them not paying their bill on time.This time we've called the ISP and they Insist everything Is fine on their end and that the company hasn't been disconnected.I can't find anything wrong with the UC.I can ping the ISP gateway.I can ping their SIP server and everything looks fine.I've added two debug files and would appreciate any assistance as my debugging knowledge Is not that great !

    Turns out the ISP was receiving calls In G729 and they use G711 Alaw.We didn't change any configuration on our side so I'm not sure what happened.I've set the sip trunk to use g711 alaw via CCA but calls are still going through as g729.I'm not sure what to configure via the cli.I assume It has something to do with transcoding but my telephony cli knowledge Is limited.
           Should I change the configuration for Individual dial-peers or Is there some global config. I can enter ?
      I added g711alaw to a dial peer and now I can't make any inbound calls either.I removed the g711alaw from the dial peer but It hasn't changed anything.
    Running debug ccsip message I receive "error 304 media type(s) unavailable. q.850 cause=65"
    I didn't expect such a small change to cause so much havoc.

  • Why I can not make video calls on Facebook?

    why i can not make video calls on facebook !

    I don't believe Facebook offers video calls as a service.

  • Redeemed Bing Voucher for 60 minutes; Skype is requesting me to add credit. Can not make a call.

    Redeemed Bing Voucher for 60 minutes; Skype is requesting me to add credit. Can not make a call. Newer Version..

    *Up to 60 minutes based on rate of $0.023 per minute. A connection fee applies per call. Actual number of minutes may vary depending on calling destination and number of calls made, see: www.skype.com  for details. The value of this code is $2 (US dollars). So that code is at least worth $1.38 for US credit.  Once you validate that voucher your Skype client should reflect the addition of that credit.  You may want to verify that the credit appears in your account. on another Skype client or on Skype for Web.  There's always a possibility that the credit has not synced to your Android device.  It should be automatic but sometimes mobiles run into that issue.  If the credit is everywhere else then it's not an account issue but an issue with the Android client.  You could try clearing the cache or resetting the phone to refresh the app, if that is the problem. Be aware that if the credit is displayed correctly and you are receiving a credit prompt then you may be attempting a remote call that is more expensive than the $1.38 balance. https://support.t-mobile.com/docs/DOC-7471

  • Can not make a call

    I can not make a call out from I phone 6 gives fast busy signal or says call can not be made at this time.

    At this time there are outages on the AT&T network. The network team is working to get this resolved as soon as possible.

  • I recieve phone call from my iphone on my mac  but i can not make a call from my mac

    I recieve phone call from my iphone but i can not make a call from my mac What shall ido

    Then follow the steps here:
    Connect your iPhone, iPad, iPod touch, and Mac using Continuity - Apple Support
    But basically make sure that iCloud is enabled with the same account in both your Mac and iPhone, turn off Wi-Fi calls if enabled in your iPhone and make sure that Facetime has the same accounts in your devices.

  • I recieve phone call from my iphone but i can not make a call from my mac

    I recieve phone call from my iphone but i can not make a call from my mac What shall i do

    Hello alireza.s,
    The article linked below details a number of steps that can help restore your iPhone's ability to make phone calls.
    iPhone: Troubleshooting issues making or receiving calls
    http://support.apple.com/en-us/TS3406
    Cheers,
    Allen

  • I can not make a call on my magicjack

    i can not make a call on my magicjack on my iphone.there is a prompt telling visit my.magicjack.com/prepaid

    You'll need to contact the magicjack developer directly, nothing Apple can do for you since your using a 3rd party app.

  • I can't make outgoing calls from my Iphone 3GS. I am using Vodafone as my Carrier

    I can't make outgoing calls from my Iphone 3GS. I am using Vodafone as my Carrier

    I would but I work on a remote mine site, closest apple store 2 hour flight away. Hence the reason I'm asking here

  • Good day, I can not make video calling with my MAC PRO 15 with FB Mountan Lion operating system   how can I do?    you can you help me? thank you very much

    good day,
    I can not make
    video calling
    with my MAC PRO 15
    with FB
    Mountan Lion operating system
      how can I do?
       you can you help me? thank you very much

    francesco marraffa wrote:
    good day,
    I can not make
    video calling
    with my MAC PRO 15
    with FB
    Mountan Lion operating system
      how can I do?
       you can you help me? thank you very much
    Are you running your MacBook Pro off WiFi or Ethernet?
    Pete

  • TS3406 iPhone 4s will not make outgoing calls once updated to iOS 8.

    I updated my phone to iOS 8 a yesterday and when I did it deleted my phone including all my apps on  my phone even though it claims to have backed it up just before updating (not a big deal most were free apps and the work properly once downloaded and the paid ones stayed on) but, my phone will no longer make outgoing calls. When I try the phone makes no noise for about 5-10 seconds and says call ended. I've tried reseting the phone, reseting the network and turning airplane mode on and off and nothing has worked. Also when I plug my phone into my computer it tells me my phone can't be restored and I should try updating iTunes but my iTunes is up to date. Any suggestions?

    I Am facing the same issue as of yours. i m having iPhone 4s and upon updating to iOS 8 it has stopped making any outgoing calls .Though there is no problem in recieving calls also with sending/ recieving messeges.

  • Can't make outgoing calls

    Hello
    My problem is that whenever I dial a number I get the engaged tone and am told “the number is busy and to use ring back press 5”. I can still receive incoming calls. Have checked the line and there are no reported faults, BT line checker says the line is fine. Have plugged the phone direct into the master socket but still unable to make outgoing calls. Have checked to see if there's any call barring in place but upon entering the * # 34 # am told “this feature is not available”. Have tried cancelling all the other call features detailed in the “calling features user guide” but am still unable to make outgoing calls. No matter which number I dial I get an engaged tone and am offered the ring back service. Please help! Many thanks in advance.

    Hi
    As you have tried different phones in the test socket it does sound like the fault is not with your equipment. I suspect that it is an exchange fault and not a line fault.
    You will now need to report the fault to your comms provider, If it is BT call from your home number on 151. I suspect that when you report the fault the line will be tested and it will test ok as the test they run is only a physical line test and as I said I suspect it is an exchange fault. Just be persistent as they will insist there is nothing wrong.
    (If I have helped you in any way to say "Thank You" please click on the star next to the message. Thank You)
    If I have solved your Issue please click the "Mark as accepted solution" button.

  • Constant Buzzing and Can't make outgoing calls

    For the past month or so, our phone line has had a constant buzzing. Now, we cannot even get a dialtone to make outgoing calls. We do receive calls, but it doesn't do us much good since the buzzing prevents us from talking to anyone anyway.

    I am having the same exact complaint, "Constant Buzzing on line, and inbound or outbound conversation cannot be performed".  I am in southern New Jersey just outside of Philly, and this problem was first recognized approximately September 19th.  I went out of town and felt that the problem would be remedied by my return.  On September 24th the same problem was still present on the line.  I used to be a Computer Network Engineer years ago and have a telephone handheld "butt set" (handheld phone that the phone techs use to connect directly to the wires.  I disconnected all of my premise equipment and connected to only the line coming in from the pole, and the problem still persists which rules out any "interior" equipment malfunction.
    Original service appointment was scheduled for Thursday September 29 between 8AM and Noon, however when Thursday arrived, I noticed on the internet that my expected service visit time had been moved back (without any heads-up) to Friday September 30 between 8AM and Noon.  Friday 12 Noon comes and goes with no results yet, and upon looking at the internet again I noticed that the expected service visit time had been moved back once again to Friday September 30 at 8 PM.
    Very poor repair service for a "phone not usable" condition.

  • Can not make srtp call to CISCO-GW

    Hi,
    There are one CISCO2821 and one CISCO3845. Both of them are configured with SRTP. They can make calls to the third-party phone with SRTP. But both gateways can not accept any call if I set them to use SRTP only. Even if the 2 gateways call each other, the calls still can not work. If I set the gw to allow srtp falling back to rtp , the calls can be established. The attached file is the debugging log from the cisco2821 .
    Cisco IOS Software, 2800 Software (C2800NM-ADVIPSERVICESK9-M), Version 12.4(15)T
    6, RELEASE SOFTWARE (fc2)
    Cisco IOS Software, 3800 Software (C3845-ADVIPSERVICESK9-M), Version 12.4(15)T5,
    RELEASE SOFTWARE (fc4)
    Thanks lot of for your help

    Upgrading to 12.4(20) T can resolve this problem. This new version adds a new option which the document doesn't point out. It took a lot of time.

  • Can not make FaceTime calls but receive face time calls

    Can not make Face Time calls but I can receive Face Time calls

    And to call the person you are trying to call, are you using his/her phone number or his/her apple id (email)?

Maybe you are looking for

  • Server Admin refuses to connect, servermgrd runs but no ports are open

    Server Admin refuses to connect to server when run locally or remotely. Upon investigating, servermgrd seems to run but when I run network utilities and port scan the server, neither port 311 or 687 are open. All other services appear to be running f

  • Database Access via a Servlet

    Hello I have the following Servlet code: package server; import javax.servlet.ServletException; import javax.servlet.http.HttpServlet; import javax.servlet.http.HttpServletRequest; import javax.servlet.http.HttpServletResponse; import java.io.PrintWr

  • When I turn i pad on first time all I get is itunes symbol what now

    how do i get home page, all i get  when i turn it on is music symbol and the end of charger as picture

  • How to meet customer's demand in the query?

    There are a lot of record in DSO, for each plant the customer wants to display the latest record. e.g Plant Date       amount A1 2007/08/09 30 A1 2007/12/05 50 A1 2007/12/28 30 in the query A1 2007/12/28 30 will be displayed. PS: Remodellierung and n

  • Query range must return one record based on the amount passed.

    Hi, Need to return the correct line_number based on the amout that falls within that range. Example;- if current amount value is 100 then line_number should return 1. if current amount value is 420 then line_number should return 4. Line_Num Amount *1