Can NOT manage a global zone

Hello everybody
I'm trying to manage a Solaris 10 that is a global zone
When i go to Tab Available to Manage Assets and select Solaris 10 operating system and click Manage Asset an error occurs:
Target com.sun.hss.domain:name=NORM-x.x.x.x,type=OperatingSystem cannot be provisioned, it is a non-global zone with an unmanaged global zone
Any ideas why?

From the Ops Center proxy, try to SSH to the IP of the asset with the provided credentials and run "zonename" - did you get "global"?
Ops Center requires the Global zone to be managed before the zones under. Also, depending on the discovery method you used, you may see a misleading name in that tab.
The best way to do this is to choose "Custom discovery" in 11g, or "Add Assets" in 12c and provide the specific IP of the global zone. This will guarantee that you are indeed trying to add the global zone.
Some more thoughts - if you're using 11g to discover s10s_u10 - you may be running into an issue with the /etc/release - try changing it to u9. Also, try running the latest OCDoctor --agent-prereq on that global zone.
Last - since you just installed, I would strongly recommend moving to 12c (Update 2 is already available) which has a tremendous amount of bug fixes.

Similar Messages

Windows can not manage to have different DPI 1080p and 4K monitor

Windows can not manage to have different DPI 1080p and 4K screen. However, it is impossible not to have a magnification of 1080p but 25-35% on Dell 4K (P2715Q) intimidate. Windows 8.1 increases on both screens. I have clicked out that it will not change
on both screens, and only on 4K Dell P2715Q.
I have Nvidia GTX 680 and latest drivers 347.88! Windows is 8.1 Pro with Mediacenter.

Hi,
Agree with you, quote from “Windows 8.1 DPI Scaling Enhancements” Windows blog.
“here have been some questions about when per-display DPI scaling is used (different DPI scaling values per display) and I wanted to add a note here to clarify. On Windows 8.1 when you have the “Let me choose one scaling level for all
my displays” check box checked (not checked by default) one uniform DPI scaling value is used for all displays.”
http://blogs.windows.com/bloggingwindows/2013/07/15/windows-8-1-dpi-scaling-enhancements/
Regards,
D. Wu
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Oracle 10g install is not working on Global zone

We installed Solaris 10 (below) in a T2000 using the same standards we have for many other hosts.After the installation was finished, three zones were exported from a M5000 class machine and imported into this T2000. From inside the zones we can call the Oracle10g installer and the graphical screen is presented. When executing the installed from the Global zone, we can see a java process running, using 100% of a thread, but no graphical interface is presented at all. Checking truss, we see a lot of pollsys being called. Any ideas?
# uname -a
SunOS wgsst2k01 5.10 Generic_127127-11 sun4v sparc SUNW,SPARC-Enterprise-T2000
# memconf -v
memconf: V2.6 06-May-2008 http://www.4schmidts.com/unix.html
hostname: wgsst2k01
banner: SPARC Enterprise T2000 (8-core quad-thread UltraSPARC-T1 1000MHz)
manufacturer: Sun Microsystems, Inc.
model: SPARC-Enterprise-T2000
Sun development codename: Ontario
Sun Family Part Number: SEB
Solaris 10 5/08 s10s_u5wos_10 SPARC, 64-bit kernel, SunOS 5.10
1 8-core quad-thread UltraSPARC-T1 1000MHz cpu, system freq: 200MHz
socket MB/CMP0/CH0/R0/D0 has a 1024MB (1GB) DIMM (address 0x000800000-0x4007fffff)
socket MB/CMP0/CH0/R0/D1 has a 1024MB (1GB) DIMM (address 0x000800000-0x4007fffff)
socket MB/CMP0/CH1/R0/D0 has a 1024MB (1GB) DIMM (address 0x000800000-0x4007fffff)
socket MB/CMP0/CH1/R0/D1 has a 1024MB (1GB) DIMM (address 0x000800000-0x4007fffff)
socket MB/CMP0/CH2/R0/D0 has a 1024MB (1GB) DIMM (address 0x000800000-0x4007fffff)
socket MB/CMP0/CH2/R0/D1 has a 1024MB (1GB) DIMM (address 0x000800000-0x4007fffff)
socket MB/CMP0/CH3/R0/D0 has a 1024MB (1GB) DIMM (address 0x000800000-0x4007fffff)
socket MB/CMP0/CH3/R0/D1 has a 1024MB (1GB) DIMM (address 0x000800000-0x4007fffff)
socket MB/CMP0/CH0/R1/D0 has a 1024MB (1GB) DIMM (address 0x000800000-0x4007fffff)
socket MB/CMP0/CH0/R1/D1 has a 1024MB (1GB) DIMM (address 0x000800000-0x4007fffff)
socket MB/CMP0/CH1/R1/D0 has a 1024MB (1GB) DIMM (address 0x000800000-0x4007fffff)
socket MB/CMP0/CH1/R1/D1 has a 1024MB (1GB) DIMM (address 0x000800000-0x4007fffff)
socket MB/CMP0/CH2/R1/D0 has a 1024MB (1GB) DIMM (address 0x000800000-0x4007fffff)
socket MB/CMP0/CH2/R1/D1 has a 1024MB (1GB) DIMM (address 0x000800000-0x4007fffff)
socket MB/CMP0/CH3/R1/D0 has a 1024MB (1GB) DIMM (address 0x000800000-0x4007fffff)
socket MB/CMP0/CH3/R1/D1 has a 1024MB (1GB) DIMM (address 0x000800000-0x4007fffff)
empty sockets: None
total memory = 16384MB (16GB)Cheers
Andreas

This pretty much says it all:
No connection could be made because the target machine actively refused it.What version of Vista?
What version of the agent? ... 10g is not a version number it is a marketing label
Did you check to see if the agent is compatible with your operating system?
My recommendation would be to get a real operating system: Either Oracle Linux or XP.

Pkgmap files missing in global zone, can't build non-global zone

My solaris 10 server is missing the pkgmap files for the packages. As a result, I can't build a non-global zone. Is there a way to recreate the pkgmap files?
The OS on the Solaris 10 server was installed via jumpstart (initial install). However, the Jumpstart process used a Solaris 9 boot server which seems to have caused the missing pkgmap problem.
Does anyone know of any other problems which would result from a version mismatch between a boot and installation server during the jumpstart process?

Hi, i have problems with building transmission from svn too:
$ versionpkg
==> retrieving latest revision number from svn... 3730
==> newer revision detected: 3730
==> Entering fakeroot environment
==> Making package: transmission-svn 3730-1 (Di 6. Nov 08:28:38 CET 2007)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
==> Validating source files with md5sums
==> Extracting Sources...
==> Removing existing pkg/ directory...
==> Starting build()...
Fetching external item into 'Transmission/third-party/libevent'
Checked out external at revision 477.
Checked out revision 3730.
==> SVN checkout done or server timeout
==> Starting make...
./autogen.sh: line 16: autoreconf: command not found
Creating aclocal.m4 ...
Running glib-gettextize... Ignore non-fatal messages.
Copying file mkinstalldirs
Copying file po/Makefile.in.in
Please add the files
codeset.m4 gettext.m4 glibc21.m4 iconv.m4 isc-posix.m4 lcmessage.m4
progtest.m4
from the /aclocal directory to your autoconf macro directory
or directly to your aclocal.m4 file.
You will also need config.guess and config.sub, which you can get from
ftp://ftp.gnu.org/pub/gnu/config/.
Making aclocal.m4 writable ...
Running intltoolize...
PKGBUILD: line 33: ./configure: No such file or directory
make: *** No targets specified and no makefile found. Stop.
==> ERROR: Build Failed. Aborting...
==> ERROR: Reverting pkgver...
i dont know whats up with the autoreconf
i hope anyone can help me!
greez

Adding routes not on the Global Zone

Is it possible to add a route to a non global zone? if not, is there a way to manipulate the route coming from non global zone?

I don't think so. There's only one kernel and only one routing table. There might be some workarounds though.
Can you describe a little more of what you're trying to do? It might be possible to think up some workarounds. For instance, ipnat might be able to do useful rewrites.
Darren

Not all non-global zones updated for DST

We have one server with Solaris 10 and four non-global zones. I installed patch 122032-03 to the global zone and it installed successfull, according to the log. With the DST change on 3/11, TWO of the non-global zones and the global zone updated correctly to daylight time, but the other TWO non-global zone DID NOT. Does anyone know what would cause this?
I have also tried to manually change the time on the two non-global zones and have not been able to; as root I get the message "not owner"
ainsworth:hughesm> su -
Password:
Sun Microsystems Inc. SunOS 5.10 Generic January 2005
You have mail.
# date
Tue Mar 13 12:02:45 PST 2007
# date -u
Tue Mar 13 20:03:16 GMT 2007
# date
Tue Mar 13 12:04:31 PST 2007
# date 0313130007
date: Not owner
usage: date [-u] mmddHHMM[[cc]yy][.SS]
date [-u] [+format]
date -a [-]sss[.fff]
Fortunately, these were just test zones. They were set up by a previous admin to be used for pgpftp, so I'm wondering if there are some special configurations for security that is preventing the time change.

Thanks for replying.
I rebooted from the global zone. All the zones have the same uptime as the global zone, except one that was rebooted more recently.
Quick question - how do I tell if it's a sparse zone or full zone?
One of the zones that the time change worked on:
$ zdump -v US/Pacific | grep 2007
US/Pacific Tue Mar 13 22:37:59 2007 UTC = Tue Mar 13 15:37:59 2007 PDT isdst=1
US/Pacific Sun Mar 11 09:59:59 2007 UTC = Sun Mar 11 01:59:59 2007 PST isdst=0
US/Pacific Sun Mar 11 10:00:00 2007 UTC = Sun Mar 11 03:00:00 2007 PDT isdst=1
US/Pacific Sun Nov 4 08:59:59 2007 UTC = Sun Nov 4 01:59:59 2007 PDT isdst=1
US/Pacific Sun Nov 4 09:00:00 2007 UTC = Sun Nov 4 01:00:00 2007 PST isdst=0
tsbackup:hughesm> cd /usr/share/lib/zoneinfo; ls -al | grep Pac
drwxr-xr-x 2 root bin 1024 Jan 19 11:19 Pacific
cathedral:hughesm> cd /usr/share/lib/zoneinfo; ls -al | grep Pac (the global zone)
drwxr-xr-x 2 root bin 1024 Jan 19 11:19 Pacific
One zone that didn't work: (the other one that did not work is the same)
# zdump -v US/Pacific | grep 2007
US/Pacific Tue Mar 13 22:45:33 2007 UTC = Tue Mar 13 14:45:33 2007 PST isdst=0
US/Pacific Sun Apr 1 09:59:59 2007 UTC = Sun Apr 1 01:59:59 2007 PST isdst=0
US/Pacific Sun Apr 1 10:00:00 2007 UTC = Sun Apr 1 03:00:00 2007 PDT isdst=1
US/Pacific Sun Oct 28 08:59:59 2007 UTC = Sun Oct 28 01:59:59 2007 PDT isdst=1
US/Pacific Sun Oct 28 09:00:00 2007 UTC = Sun Oct 28 01:00:00 2007 PST isdst=0
# uname -a
SunOS albina 5.10 Generic_118822-02 sun4u sparc SUNW,Ultra-4
# cd /usr/share/lib/zoneinfo (non-global zone that did not update)
# ls -al | grep Pac
drwxr-xr-x 2 root bin 1024 Apr 20 2005 Pacific
I was thinking of trying to apply the patch within the zone itself, but when I tried smpatch analyze, it didn't list it:
# smpatch analyze
120900-04 SunOS 5.10: libzonecfg Patch
121133-02 SunOS 5.10: zones library and zones utility patch
119254-27 SunOS 5.10: Install and Patch Utilities Patch
119574-02 SunOS 5.10: su patch
121453-02 SunOS 5.10: Sun Update Connection Client Foundation
121118-08 SunOS 5.10: Sun Update Connection System Client 1.0.8
121081-05 SunOS 5.10: Connected Customer Agents 1.1.0
122231-01 SunOS 5.10 Sun Connection agents, transport certificate update
I attempted to add the patch using smpatch, but I've never run it here before so it's probably not configured right:
# smpatch update -i 122032-03
122032-03 cannot be validated.
com.sun.patchpro.model.PatchProRuntimeException: Unexpected throwable
at com.sun.patchpro.cli.PatchServices.waitForThread(PatchServices.java:1284)
at com.sun.patchpro.cli.PatchServices.installPatches(PatchServices.java:1121)
at com.sun.patchpro.cli.PatchServices.main(PatchServices.java:510)
Caused by:
java.lang.Throwable: ERROR: Failed to validate the digital signature(s).
at com.sun.patchpro.model.PatchProModel$InnerDownloadPatchThread.downloadPatchFailed(PatchProModel.java:2855)
at com.sun.patchpro.server.GroupPatchDownloader.dispatchFailedEvent(GroupPatchDownloader.java:384)
at com.sun.patchpro.server.GroupPatchDownloader.downloadPatchFailed(GroupPatchDownloader.java:335)
at com.sun.patchpro.server.ServerPatchServiceProvider.dispatchFailedEvent(ServerPatchServiceProvider.java:2577
at com.sun.patchpro.server.ServerPatchServiceProvider.validatePatchBundle(ServerPatchServiceProvider.java:2196
at com.sun.patchpro.server.ServerPatchServiceProvider.requestDownload(ServerPatchServiceProvider.java:1780)
at com.sun.patchpro.server.ServerPatchServiceProvider.performDownloadPatches(ServerPatchServiceProvider.java:1
2)
at com.sun.patchpro.server.ServerPatchServiceProvider.downloadPatches(ServerPatchServiceProvider.java:860)
at com.sun.patchpro.server.PatchServerProxy.downloadPatches(PatchServerProxy.java:142)
at com.sun.patchpro.server.GroupPatchDownloader.downloadPatches(GroupPatchDownloader.java:124)
at com.sun.patchpro.model.PatchProModel.performPatchDownload(PatchProModel.java:1932)
at com.sun.patchpro.model.PatchProStateMachine$10.run(PatchProStateMachine.java:526)
at com.sun.patchpro.util.State.run(State.java:266)
at java.lang.Thread.run(Thread.java:595)
So then I attempted to add the patch using patchadd:
# patchadd 122032-03
Validating patches...
Loading patches installed on the system...
Done!
Loading patches requested to install.
Done!
Checking patches that you specified for installation.
Done!
Global patches.
0 Patch 122032-03 is for global zone only - cannot be installed on local zone.
No patches to install.
under /var/sadm/patch/122032-03 on the Global zone, the log shows:
-rw-r--r-- 1 root root 2666 Jan 19 11:19 log
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
WARNING: /usr/share/lib/zoneinfo/Africa/Timbuktu <no longer a regular file>
WARNING: /usr/share/lib/zoneinfo/America/Argentina/ComodRivadavia <no longer a regular file>
WARNING: /usr/share/lib/zoneinfo/America/Indiana/Indianapolis <no longer a linked file>
WARNING: /usr/share/lib/zoneinfo/America/Indianapolis <no longer a regular file>
WARNING: /usr/share/lib/zoneinfo/America/Kentucky/Louisville <no longer a linked file>
WARNING: /usr/share/lib/zoneinfo/America/Louisville <no longer a regular file>
WARNING: /usr/share/lib/zoneinfo/CST6CDT <no longer a linked file>
WARNING: /usr/share/lib/zoneinfo/EST <no longer a linked file>
WARNING: /usr/share/lib/zoneinfo/EST5EDT <no longer a linked file>
WARNING: /usr/share/lib/zoneinfo/Europe/Belfast <no longer a regular file>
WARNING: /usr/share/lib/zoneinfo/HST <no longer a linked file>
WARNING: /usr/share/lib/zoneinfo/MST <no longer a linked file>
WARNING: /usr/share/lib/zoneinfo/MST7MDT <no longer a linked file>
WARNING: /usr/share/lib/zoneinfo/PST8PDT <no longer a linked file>
WARNING: /usr/share/lib/zoneinfo/Pacific/Yap <no longer a regular file>
Dryrun complete.
No changes were made to the system.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
WARNING: /usr/share/lib/zoneinfo/Africa/Timbuktu <no longer a regular file>
WARNING: /usr/share/lib/zoneinfo/America/Argentina/ComodRivadavia <no longer a regular file>
WARNING: /usr/share/lib/zoneinfo/America/Indiana/Indianapolis <no longer a linked file>
WARNING: /usr/share/lib/zoneinfo/America/Indianapolis <no longer a regular file>
WARNING: /usr/share/lib/zoneinfo/America/Kentucky/Louisville <no longer a linked file>
WARNING: /usr/share/lib/zoneinfo/America/Louisville <no longer a regular file>
WARNING: /usr/share/lib/zoneinfo/CST6CDT <no longer a linked file>
WARNING: /usr/share/lib/zoneinfo/EST <no longer a linked file>
WARNING: /usr/share/lib/zoneinfo/EST5EDT <no longer a linked file>
WARNING: /usr/share/lib/zoneinfo/Europe/Belfast <no longer a regular file>
WARNING: /usr/share/lib/zoneinfo/HST <no longer a linked file>
WARNING: /usr/share/lib/zoneinfo/MST <no longer a linked file>
WARNING: /usr/share/lib/zoneinfo/MST7MDT <no longer a linked file>
WARNING: /usr/share/lib/zoneinfo/PST8PDT <no longer a linked file>
WARNING: /usr/share/lib/zoneinfo/Pacific/Yap <no longer a regular file>
Installation of <SUNWcsu> was successful.
On the non-global zones, either there is nothing under /var/sadm/patch or there isn't even a patch directory under /var/sadm. Is there somewhere else to look?
Thanks.

Can not manage UCM Server

when I login in UCM Server by using administrator, clicking manager in the left Navgation, then clicking manage applet
there are web layout compiler, user management, repository manager, archiving application,workflow management, configuration manager in the right page. But when I click them(for example: repository manager), it can not popup a new window. it need a plugin. I can not get this plugin. Who have this plugin or where can download it? Any help, I will be appreciated greatly!

Hi,
Looks like browser setting required while loading the java applet.
Go to Control Panel--> Java--->Advanced-->Default Java for browsers and based on your browser apply your settings.
Thanks,
Ravinder

[Mac OS X 10.4.9] Server Admin Can NOT manage localhost

a.t.t
first i delete the X509Anchors And X509Certificates
then i found that SERVER ADMIN app Cannot Manage the LOCALHOST
it said:
==========
There is no server available at the address ou entered
All services failed to aceess the address you provides for QTSS.local
Check the address and try to log on again or contact your network administrator
[keep server in list] [remove server from list]
==========
how can i use SERVER ADMIN again?
Thanks

Hi, and a warm welcome to the forums!
No Server expert here, but I'm fairly certain you must replace those 2 files with copies from elsewhere.

Can Not Manage Gwia

Hello Everyone!
On gw8.03. When i attempt to open the gwia in console1 it returns an error: An error occured converting the groupwise object to its edirectory counterpart (image attached).
I think i must graft the gwia (or, maybe not), but i can't find the specific TID for the gwia. Other than grafting, are there other options? As always, thanks in advance.

Hi
I'd recommend a graft, try the following:
To graft GroupWise objects:
In ConsoleOne, select a container in the eDirectory view.
Click the Tools menu > GroupWise Utilities > GW / eDirectory Associations > Graft GroupWise Object to display the Graft GroupWise Objects dialog box.
Follow the on screen prompts - should be easy enough.
The other option is to blow away your gwia and recreate it.
Cheers,

Contacts to be uploaded to ICLOUD. Can not manage it.

Dear Colleagues
I have tried to upload all my contacts from my IPHONE 4S to ICLOUD.
I do enter www.icloud.com and even I can enter my account....my contacts are NOT THERE.
Do I have to do anything special?
Any features?
Waiting for help
Regards
Saeta

Settings > iCloud > Contacts > ON

I can not use the Global Variable in the subvi which be called dynamic

Hi,everybody,
i have a problem.
i called dynamic a subvi (subvi.vi) in the MainVI(main.vi),and putted it in the subpanel in the main.vi .the subvi should show the string (success!),but it not
why? Help me
WinXP LavVIEW8.0
Using LabVIEW 8.0.0 on Windows XP
附件:
MyTest.zip ‏16 KB
MainVI.JPG ‏41 KB
subvi.JPG ‏13 KB

subpanel中的VI要运行才可以。

Can not manage one of my cluster CM

Hi all
We have cluster CM (PUB-SUB) we have change the administrator password BUT we notice that some IP Phone is registered on one server and other IP Phone is register on the other server AND when we try to change any phone information on the SUB we have this message
Access to the requested resource has been denied.
The attempted action was a violation of security protocols and will not be allowed. Please try another action.
please help

hi
we have recovered our old password but it does not help we still facing the same issue
and we have tried the following too but it does not work
ome users are unable to access the CCMUser page, and this error appears:
Access to the requested resource has been denied.
You must restart the browser to login again.
Solution
In order to resolve this issue, complete these steps:
Reset the password of the users who are not able access the page.
Clear the cache memory.
Try to login again.

How to know global zone in case non global zone is hung

....I have nongloabazone1,nongloabazone1,nongloabazone2,nongloabazone3...
i am working on nongloabazone1 ..
suppose i am giving remote support ...
if my nongloabazone1 is hung ..i need to know the global zone on which this nongloabazone1 is installed and reboot from there ...if my nongloabazone1 is hung i cannot apply #arp -a and check it out by trial and error method and know the global zone....
in this case how can i reboot the nongloabazone1 .....i have the same question in case of Ldoms also..............
Thanks in Advance.......

Hi.
It's not clear what means "non global zone is hung".
In case it realy hangs you can't do anythins in this zone.
1) In case you have access to global zone. You can get list all zones running on this host:
zoneadm list -cv
For reboot local zone from global zone just need: zoneadm -z <zone_name> reboot
2) Zones not support live migration. So after zone started it can not change global zone.
Create script that put global zone name in file. When need - just read content of this file.
This file can be created from global zone when start (or create/move) local zone.
In case zone migration is not quickly operation, just create file (or database) for list what zone started on which host.
For LDOM it look wery same.
Regards.

FilesystemMountPoints for ufs disks mounted to non-global zones

Hello,
I have a SAN ufs disk to be used as a failover storage, mounted to non-global zones (NGZ).
Solaris 10 nodes using Cluster 3.2
I'm looking for the correct value for the property FilesystemMountPoints and the vfstab entry required for a failover disk mounted to a NGZ.
Should the path NOT include the NGZ root path?
From the man page for SUNW.HAStoragePlus, for the property FilesystemMountPoints:
You can specify both the path in a non-global zone and the path in a global zone, in this format:
Non-GlobalZonePath:GlobalZonePath
The global zone path is optional. If you do not specify a global zone path, Sun Cluster assumes that the path in
the non-global zone and in the global zone are the same. If you specify the path as
Non-GlobalZonePath:GlobalZonePath, you must specify Global-ZonePath in the global zone's /etc/vfstab.
The default setting for this property is an empty list.
You can use the SUNW.HAStoragePlus resource type to make a file system available to a non-global zone. To enable
the SUNW.HAStoragePlus resource type to do this, you must create a mount point in the global zone and in the
non-global zone. The SUNW.HAStoragePlus resource type makes the file system available to the non-global zone
by mounting the file system in the global zone. The resource type then performs a loopback mount in the
non-global zone.
Each file system mount point should have an equivalent entry in /etc/vfstab on all cluster nodes and in all
global zones. The SUNW.HAStoragePlus resource type does not check /etc/vfstab in non-global zones.
SUNW.HAStoragePlus resources that specify local file systems can only belong in a failover resource group
with affinity switchovers enabled. These local file systems can therefore be termed failover file systems. You
can specify both local and global file system mounts points at the same time.
Any file system whose mount point is present in the FilesystemMountPoints extension property is assumed to
be local if its /etc/vfstab entry satisfies both of the following conditions:
1. The non-global mount option is specified.
2. The "mount at boot" field for the entry is set to "no."
In my situation, I want to mount the disk to /mysql_data on the NGZ called ftp_zone. So, which is the correct setup?
a. FilesystemMountPoints=/mysql_data:/zones/ftp_zone/root/mysql_data
Global zone vfstab entry /dev/md/ftpabin/dsk/d110 /dev/md/ftpabin/rdsk/d110 /zones/ftp_zone/root/mysql_data ufs 1 no logging
NGZ mount point /mysql_data
OR
b. FilesystemMountPoints=/mysql_data:/mysql_data (can be condensed to simply /mysql_data)
Global zone vfstab entry /dev/md/ftpabin/dsk/d110 /dev/md/ftpabin/rdsk/d110 /mysql_data ufs 1 no logging
NGZ mount point /mysql_data
Should the path NOT include the NGZ root path?
And should the fsck pass # be 1 or 2?
Looking at this example from p. 26 of
http://wikis.sun.com/download/attachments/24543510/820-4690.pdf
This example doesn't mention the entry in vfstab.
Create a resource group that can holds services in nodea zonex and nodeb zoney
nodea# clresourcegroup create -n nodea:zonex,nodeb:zoney test-rg
Make sure the HAStoragePlus resource is registered
nodea# clresourcetype register SUNW.HAStoragePlus
Now add a UFS [or VxFS] fail-over file system: mount /bigspace1 to failover/export/install in NGZ
nodea# clresource create -t SUNW.HAStoragePlus -g test-rg \
-p FilesystemMountPoints=/fail-over/export/install:/bigspace1 \
ufs-hasp-rs
Thank you!

Hi,
/zones/oracle-z is my root directory of the zone.
* add the device to the zone :
root@mpbxapp1 # zonecfg -z oracle-z
zonecfg:oracle-z> add device
zonecfg:oracle-z:device> set match=/dev/global/dsk/d12s0
zonecfg:oracle-z:device> end
zonecfg:oracle-z> add device
zonecfg:oracle-z:device> set match=/dev/global/rdsk/d12s0
zonecfg:oracle-z:device> end
zonecfg:oracle-z> exit
* add FS to NGZ's /etc/vfstab : ( You may omit this step, I don't know why but it works without this step :) )
root@mpbxapp1 # vi /zones/oracle-z/root/etc/vfstab
/dev/global/dsk/d12s0 /dev/global/rdsk/d12s0 /global/oracle ufs 1 no logging
* add FS to global zone's /etc/vfstab :
root@mpbxapp1 # vi /etc/vfstab
/dev/global/dsk/d12s0 /dev/global/rdsk/d12s0 /zonefs/oracle ufs 1 no logging
* set the FilesystemMountPoints property :
root@mpbxapp1 # /usr/cluster/bin/clresource set -p FilesystemMountPoints=/global/oracle:/zonefs/oracle oracle-hastp
Whit this configuration you may ensure that the FS is not directly accessible from master zone. Actually, it's accessible but with a different PATH. For example, for Oracle, from the master zone Oracle can not be started/stopped because the controlfile can not be accessed. :)
Hope this helps,
Murat

QFS in non global zones

Hi,
We are planning to configure QFS from a T3-2 to at least 2 non global zones. At the moment the data is shared over NFS but it has been decided to install and configure QFS for speed and resilience.
Reading numerous documents I am unable to find anything (including in the admin manual) which details how to present the QFS filesystem to the non global zone, there is plenty of mention regarding Sun Cluster and configuring qfs on samfs and setting the type of the filesystem in the zone to samfs but I dont know if we have purchased samfs and qfs but I suspect we only have qfs.
Basically all I planned to do was present the storage from the EMC to both servers, install and configure qfs then add to the non global zone configuration and do some testing to prove resilience but after doing investigation it may not be as simple as that.
If anyone has any experience of configuring a standalone qfs filesystem in a zone a helpful hint would be appreciated.
Thanks.

Hi!
For example: http://wikis.sun.com/display/SAMQFSDocs/New+Features
You can configure QFS at global zone and then delegate some QFS-FS to local-zones over lofs.
Regards.

Can NOT manage a global zone

Similar Messages

Maybe you are looking for