Can not modify/import RFC/IDoc

After I import design object to IR, I can't import IDoc from SAP system.
there I can not change system, client, information.
Why?

hi
Just double click on the software component and check whether the radio button Import of RFCS and IDOCs interfaces from SAP systems Permitted. Then you give R3 applicaiton server name and the system number as 00 and give your userid and password.
You can also get your R3 applicaiton server name from the SAP logon pad. Open SAP Logon pad select the R3 system which you want to connect and click on Change Item. There your application server name is given. So cross check once again whether this one and the one you are giving are the same. Then proceed further. It should work.
Note: reward points if solution found helpfull
Regards
Chandrakanth.k

Similar Messages

Error importing RFC / idoc despite following note 769356

We have been experiencing a number of problems where we cannot import RFC / idocs in the integration repository. The BASIS team have followed note 769356 and originally this solved the problem but meant that we reverted back to old screens in the Integration Builder and some German texts in the Integration Repository.
Current patch version is Support Stack 4
To get to this point the following steps were followed:
Undeployed com.sap.xi.repository
Deployed the install version of com.sap.xi.repository.
In order to correct the problems with the incorrect screens etc.. The following steps were carried out:
Undeployed com.sap.xi.repository
Deployed the Support Stack 4 version of XITOOLS (includes com.sap.xi.repository)
Applied Support Stack 5 for the Abap kernel
Applied SAPXIAFC04P_1-20000272 and SAPXITOOL04P_1-20000274 via SDM
This fixed all of the problems with German texts etc.. but now we cannot import RFC / idocs again. In the Java Web Start Log (attached) we still get the error message
mentioned in note 769356. We have deleted the Web Start Cache on the client hosts (several restarts of the machine and deletions of the cache). The BASIS guys are going to undeploy and redeploy the repository again but failing that we are running out of ideas.
Does anyone have any suggestions?
Here is the entry in the log file:
java.lang.AbstractMethodError: com.sap.aii.ibrep.sbeans.upload.UploadServiceRemote_Stub.openSAPSource(Lcom/sap/aii/utilxi/misc/r3Connect/SAPConnectionData;Lcom/sap/aii/utilxi/misc/r3Connect/SAPLoginData;Lcom/sap/aii/ib/bom/gen/VersionContext;)Lcom/sap/aii/ibrep/sbeans/upload/SourceID;at com.sap.aii.ibrep.clsif.upload.RemoteUploadClient$ConnectionImpl.connectBean(RemoteUploadClient.java:107)at com.sap.aii.ibrep.clsif.upload.RemoteUploadClient$ConnectionImpl.<init>(RemoteUploadClient.java:91)at com.sap.aii.ibrep.clsif.upload.RemoteUploadClient.getSAPUploadConnection(RemoteUploadClient.java:66)at com.sap.aii.ibrep.gui.tools.r3import.wizard.SAPLogonPage.connect(SAPLogonPage.java:94)at com.sap.aii.ibrep.gui.tools.r3import.wizard.R3ImportWizard$LoginTask.run(R3ImportWizard.java:456)at com.sap.aii.utilxi.misc.thread.ThreadPool$ThreadPoolThread.run(ThreadPool.java:321)

Dan,
you are almost there!
If you religiously follow note 769356, you should not have this problem.
Just do the following as the note suggests:
- From SDM, undeploy only the com.sap.xi.repository
- Unzip SAPXITOOL04P_1-20000274.SCA.zip
- The file ExchangeRepository.sda will be one of the extracted files
- Only import the ExchangeRepository.sda. Do not import the entire ZIP package.
- Restart the J2EE engine.
- Delete Webstart Cache
- From the XI admin page:
http://XIhost:50000/rep/support/admin/status.html
Re-Initialize the Jars for resigning.
- Wait for 5 minutes for the jar signing to finish. Sometimes, the jar signing gets interrupted, you have to let it finish.
The above steps worked for me.
thanks,
Manish

Problem importing RFC/IDOC

Hi All,
While importing RFC/IDOC, there are 3 steps
1. Logon
2. Choose Objects
3. Execute imports
After giving the reqd info in logon, I can go to the next step, but here when I click on RFC or IDOC, I am not able to see the RFCs or IDOCS, IR is not responding, the screen goes blank and I have to close the application(IR).
Any help is appreciated.
Thanks,
Jai Shankar

>>wasn't it 3 that felt like 15 ?
No i guess it is a 15 actually.
>>do you have many Zidoc - ZRFC ?
Yes. This is a IDES system I am connectin to. So lot of them.
Thanks,
Jai Shankar

Import RFC/IDOC error

Hi all,
I am following "How to...push data in to BW from XI."
In the 5th step in the document it is given
Choose "Import RFC/IDOC" in the context menu of "Imported Objects" and enter your user data to logon to the BW system.
Select the function module /BIO/Q16ASENDXMLDATATOBW_RFC
Press "continue"
Press "Start"
But when I do this I am getting a java nullpointer exception error com.sap.aii.ibrep.sbeans.upload.remoteuploadexception:jsva.lang.nullpointerexception
I am using jre1.4.2_10 and java web start version 1.4.2
Please help me in resolving this issue.
Regards,
Aanand

Hi Anand,
Can you pls make sure that no other users have this same RFC imported into your XI integration builder and is waiting to get their change list activated. In that case also we get the error in importing...
check these links also.
Error importing RFC / idoc despite following note 769356
Cheers
JK

HELP! Downloaded LR5 and when open it shows an error message saying error while trying to change from modules and I can not even import photos. Am I doing something wrong?

HELP! Downloaded LR5 and when open it shows an error message saying error while trying to change from modules and I can not even import photos. Am I doing something wrong?

I have the same problem, and the solutions in Error changing modules | Lightroom do not work. Even uninstalling and reinstalling a new copy did not solve the problem. As anyone got an idea what other lingering files might be causing the problem?

Why is there no "none" option of payment methods? , Can not modify About Me!

Why is there no "none" option of payment methods? , Can not modify About Me!

How to Get Apps From the App Store Without a Credit Card
http://ipadhelp.com/ipad-help/how-to-get-free-apps-from-the-app-store-without-a- credit-card/
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
http://support.apple.com/kb/ht2534
If None is not available - On your computer launch iTunes and click "iTunes Store" in the left navigation pane. Click the "down arrow" next to your name at the top right side of the page and click "Account." Enter your username and password and click "View Account" to log into your account information. Next to your Payment Type, click "Edit." Select the "None" button and click "Done." Confirm that your card has been removed by returning to the Apple account information screen. Under Payment Type, it should say that there is no credit card on file.
 Cheers, Tom

I can not install any addons as firefox throws an error saying " firefox can not modify the needed file"

whenever I try to install an addon, firefox says it can not install the addon since it can not modify the needed file! Whatever addon I have are from my previous version of firefox.

Is the date / time set correctly on that PC? <br />
Right-click the Time in the System Tray and select Adjust Date / Time to see.

Can not modify jsp portlet

Hello,
I have an application with 16 jsp portlets. All of them works fine, but when I add one more portlet it works fine at the begining but when I modified it and then deployed it the changes does not appear. And also I tried to add one more portlet but when I doplied I can not see it in the provider that I registered in oracle portal.
I'v tried also add new application with very very simple portlet and then register this new provider It works fine at the begining but when I modified it (just add word hello to be appeard in the portlet) the changes not appear also.
Any helpfull comment/suggestion?

Hi Bellys,
bellys77 wrote:
Hi All
I can not modify my empty sequence.
I created lots of new sequences HD snd in different frame rates.
all same... modify is grayed out..
please help
Which version of Premiere Pro are you running? Any more details? FAQ: What information should I provide when asking a question on this forum?
Thanks,
Kevin

I am running firefox 23.0.1. I just upgraded to evernote 5.0+. When I try to add webclipper 5.7 to firefox I get the error Firefox can not modify the neede

I am running firefox 23.0.1. I just upgraded to evernote 5.0+.
When I try to add webclipper 5.7 to firefox I get the error
Firefox can not modify the needed file
I could not locate the files referenced in the answers presented.

Firefox no longer unpacks an extension automatically, but renames the XPI file to the ID of the extension and copies that file to the extensions folder in the Firefox Profile Folder.
If an extension needs to be unpacked then there should be an unpack directive (<nowiki><em:unpack>true</em:unpack></nowiki>) in the install.rdf file of that extension.
* https://developer.mozilla.org/En/Updating_extensions_for_Firefox_4.0#XPI_unpacking
You can try to set the extensions.alwaysUnpack pref to true on the about:config page.
*http://kb.mozillazine.org/about:config

Can not successfully import movie from camera

It's a short little movie on our still camera (model: Panasonic DMC-FZ8), that we can actually watch w/ in the camera. It's an important clip for us and we really want it and saved off the camera.
However, I can not import it in iPhoto on my G5 or my wife's intel iMac? Image shows to import in iPhoto but that's about it. It just hangs on "preparing to import" and I have to force quit iPhoto. Help!
Thanks
Message was edited by: Tim3308

Tim:
Image Capture controls which application, if any, to launch when a camera is connected to the computer. Launch Image Capture and then connect the camera to the Mac. You can then manually upload the movie file to the desktop and try importing from there.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Javafx media component can not modify the http header. javafx media component can not append parameter in url such as m3u8?channel=2

1. When our HLS stream server check user name and password. In http header such as the cookies value. There are not place for it.
2. The mp4 can append ?parameter=value. But m3u8 can not be appended.

1. When our HLS stream server check user name and password. In http header such as the cookies value. There are not place for it.
2. The mp4 can append ?parameter=value. But m3u8 can not be appended.

Customizing FBL1N - FB02 // Can not modify field PAYEE in document display

Hi,
When opening line items in FBL1N for a particular Vendor and selecting, open items.
In the document display I have a field called 'PAYEE' (BSEG-EMPFB)
This field in the first document is enabled. Although on the second document this field is disabled and I can't enter any data.
Does anyone knows the customizing that will make the field 'ENABLE' ? Or why it is disabled ?
The two documents aren't for the same company code and do not have the same type (BLART).
Appreciate your reply.
Regards
Jonathan
Edited by: Antish Awootar on Aug 4, 2010 1:17 PM

Hi,
Please check in the transaction OB32, the setting for this field for the relevant company code.
Regards,
Gaurav

Nikon 610 Raw files can not be imported. Please help (JPEG files work) Version 5.2

I just purchased Lightroom Version 5.2 and cannot import the *.NEF files. Very frustrated. Can anyone help?

You should be able to download the latest version of L5.x from
Adobe - Lightroom : For Macintosh
Adobe - Lightroom : For Windows

Why AP can not modify the hostname

Modify the hostname of the AP, but the tips below in the WLC WEB

The error message is telling you that on your High Availability tab you have an IP Address in the Primary/Secondary/Tertiary section but do not have a WLC hostname there. High Availability is done by WLC Name with the IP Address Optional. The only way you'll be able to make a GUI modification (change the AP name for example) will be AFTER you fix the error [remove the ip address in the HA section, or add the WLC name like is required for a valid HA config).

Can not modify wire in LabVIEW 8.6 create with State Editor

I have a VI created using LabVIEW 8.6 that incorporates a State Editor diagram (not State Chart). After working on the VI for several weeks, I created a new State. Some of the shift registers were pre-wired (first time I have seen this). The wires connecting to the tunnels that connected to the shift-registers could not be modified. Any clues on how enable modifications of these wires.

Blubell,
I have been able to recreate this with LV 8.6 and the SDE ( State Diagram Editor ) with the following:
1- Use the SDE to create a state diagram with several states.
2 - Go the the block diagram and add a shift register to the outer while loop and wire through case statement.
3 - Right click the tunnel on the case statement and select 'Linked Input Tunnel>Create & Wire Unwired Cases'. LV will go ahead and make the connections for you in the other case statements. I guess its a new tool. Unfortunately it is interacting with the SDE when you add another case and won't let you alter the connection for the new case. It is locking this connection just like it locks several other things to the state diagram.
The cure appears to be this:
1 - Open the state diagram and delete the new case/cases.
2 - Go to the block diagram and right click on the problem child tunnel and select 'Linked Input Tunnel>Clear'. Now you should be able to go back to the SDE and add the new states.

Can not modify/import RFC/IDoc

Similar Messages

Maybe you are looking for