Can not open a drive in PC.
when I connect my phone to PC, it is detected by iTunes. But I am unable to open as a drive in my PC to copy the photos from iPhone to PC.
I have checked the drivers in my PC. There is no drive available for iPhone.
iPho
How to make my phone detect as a drive (D drive or E drive) in my PC. I need to copy photos from my phone to my PC. Please help me
Similar Messages
-
can not open drive
I am having a tuff time reading what the make and model PC, and what drive it is.
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP. -
CAN NOT OPEN CANON EOS20D RAW FILE IN PHOTOSHOP CS2
I had Photoshop CS2 installed on my PC some years ago and could open my raw files from my canon eos 20d. I changed the hard drives in my pc to solid state drives and had to reinstall photoshop cs2. I could not activate photoshop as it was too old a version so I had to download from adobe website with their activation code. Now, I can not open any of my canon eos 20d files. I have taken some now photos just a few days ago and the problem still arises. I get the message that it does not recognise this type of file. Any ideas?
You downloaded, extracted (unzipped) the Camera_Raw_3_7.zip and copied/moved the Camera Raw.8bi to
C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\CS2 (windows 64 bit system)
or
C:\Program Files\Common Files\Adobe\Plug-Ins\CS2 (windows 32 bit system)
Camera Raw 3.7 update for photoshop cs2 Windows
Adobe - Photoshop : For Windows : Camera Raw 3.7 update
other cs2 updates
Adobe - Photoshop : For Windows
Adobe - Bridge : For Windows
Adobe - Creative Suite : For Windows -
After updating my MacBook Pro to yeosemite I want my old desktop picture back. I did a full back up before the install. I found the "Settings" folder in Time machine but when I try to open it I get an error message saying "You can not open this folder. It is in TimeMachine".
Can you browse the Time Machine drive from Finder?
If you can and you know where the picture was stored ie on your desktop you can browse through the folder structure to the picture copy it and paste it somewhere on your new install before right clicking it and 'set as desktop background' -
Can not open any files following Disk Repair! Help!!
Hi. My iMac has failed to boot up a couple of times recently. I have used the Disk Repair utility to solve it twice. Both times it found errors and repaired them but the second time when I boot up normally again I can not open 99% of my files, from spreadsheets to videos. I can see the files in finder but if I click on them nothing happens. Also Finder behaves strangely jumping back to higher folder levels by itself. I can use my yahoo mail account to attach files to an email, send them to another machine, download them and they are fine so it seems like they are still there but my imac can't understand what they are in order to open them. Any ideas? - I have about 900 gig of files that i'd rather not email on by one to get them back!!! Thanks. Alex
You should not be running without a backup, preferably a bootable clone on an external hard drive. Some have redundant backups, one a clone, the other Time Machine, on two different external drives. I have clones on two externals. Drives can fail without notice at any time and everything goes down the drain.
You can use free/donationware Carbon Copy Cloner.
http://www.bombich.com/ -
Can not open any files CS5 Win 7 64 bit
I can not open any files in Photoshop. I can open them in Bridge or LR. If I open a file in Camera Raw and try to go to Photoshop, PS opens and just sits there and looks at me as if I opened the program only.
Is this a new installation that has never worked, or is this a problem that has cropped up recently?
In any case, there are two things you can do that between them have a very good chance of getting things working for you.
1. As a diagnostic, click Edit - Preferences - Performance, and uncheck (disable) the [ ] Enable OpenGL Drawing setting, then close and reopen Photoshop. If this corrects the problem, then chances are good that your display driver needs to be updated. To do so, go to the web site of the maker of your video card (e.g., nVidia or ATI) and follow the links to the driver download that matches your hardware and operating system. When you've updated the driver and rebooted your system, re-enable the OpenGL Drawing setting (remembering to close and restart Photoshop) then re-test.
2. Clear all Photoshop preferences to standard defaults. To do this, press and hold the Control, Shift, and Alt keys IMMEDIATELY after cold-starting Photoshop from its shortcut or menu entry. If you're quick enough, it will prompt you. You'll need to go through all the preferences again to ensure any customizations you want are re-done.
Hope this helps!
-Noel -
Can not open flex application in IE
Dears,
I met a problem as below.
I login a pc client which restricted to access D drive (no read permission) and can not access internet as well.
But, it is able to access the intranet servers.
However, I found that I can not open the flex application deployed in the intranet server by IE.
I tried to open the flex application in Firefox, it is no problem.
I do not know what's the constraint configued in IE by our windows administrator.
I just know the IE's temporary files is configured to D:\Documents and Settings\pschung\...., and I have no D drive read permisson.
Will flex application need to be downloaded to local drive?
And since I have no read permission of D drive, so it is failed to download the application?
Is there any settings I can set? Therefore I can successfully open the flex application in the intranet by IE.
Really thanks for your help in advance.Today, I have a new test result that the user account is allowed to access internet, but still can not access D drive.
The user can not change the IE's internet temporary files location.
I can not open the flex application from yahoo server.
Is there any method to execute flex application without temporary files support?
Thank you very much. -
Can not open Firefox application - not supported on this archetecture
I have been able to use Firefox in the past, but when I tried upgrading to FireFox 4, I get an error msg: that it is not supported on this architecture.
Today, I have a new test result that the user account is allowed to access internet, but still can not access D drive.
The user can not change the IE's internet temporary files location.
I can not open the flex application from yahoo server.
Is there any method to execute flex application without temporary files support?
Thank you very much. -
I suddenly can not open pdf files. I have had Adobe Reader Xl and just ran into this problem
I have had adobe reader xl for some time and suddenly can not open a pdf file. I received an email yesterday with a pdf attachment which I can not open. What could be my problem?
Hi Pat, My operating system is Windows 7, Home Premium Service Pack 1. My email client (email Provider is Cox Communications - Cox.net).
Can not in my post means I tried to open a pdf attachment to a email. I received nothing happens. I do not get a blank screen or any messages. Nothing Nothing happens at all. I can click several times and get no response.
I did discover that by clicking on the Adobe Icon on my deskt topi get an Adobe box containing "Do you want to allow changes to your computer. I click Yes and get to my computer where I can find the above mentoned attachment which I think I had previously saved. I then get the attachment whick I can print. This may be printing from my hard drive - I am not sure. I think I could go through this procedure every time I want to open a atachment but it seems a long way around.
Any help you can give me would be appreciated. I have thought about removing Adobe and reinstalling. Maybe there is a corruption to my Adobe file.
Jim -
HAVE PHOTSHOP CS2. IN PAST NO PROBLEM OPENING CANON EOS20D FILE. PROBLEM WITH PC AND HAD TO REINSTAL VIA ADOBE WEBSITE. NOW CAN NOT OPEN FILE. DOES NOT RECOGNIZE
Bit of back ground.
Originally had Windows Vista 64 bit and installed Potoshop CS2 from CD.
This worked fine. I then upgraded my PC and changed the hard drives to
solid state drives and Windows 7 (64 bit) and Potoshop CS2 from CD. This
worked fine. My PC was infected with a virus so bad that I had to scrub the
whole PC and re-install every programme, one of which was Potoshop CS2. At
this point I could not activate Potoshop CS2 as the activation server was
shut down. I therefore had to download from the Adobe website. This is when
the problems seem to start.
Not only can I not view the CR2 files taken with my Canon EOS 20D but I can
not view JPEG nor TIFF files that I have also saved to hard drive. The odd
thing is though, I can view photos taken by my iphone 4S.
The Camera Raw plug in is 3.0 but I have added as you have suggested the
3.7 version and I still get the same result. -
hello, I can see the Icon of my external hard on the mac os x 10.6.8 but I can not open it or view any file in the external hard
your prompt reply will be appreciated
thanksReinstall 10.6 again, but this time hold c boot off the 10.6 and erase the ENTIRE internal drive.
You do this by selecting the drive makers name and size on the left hand side, not the slightly indented partition underneath it.
If you erase and install 10.6 only into a parittion, say Macintosh HD, the you still have the hidden Lion Recovery Partition on the drive and it appears you already have 10.7
In the MAS, hold option and click Purchases to redownload Lion
FYI, you don't need to install 10.6 to reinstall 10.7, 10.7 can be reinstalled via the Lion Recovery, Command r boot.
See this for more info
https://discussions.apple.com/docs/DOC-3046 -
I recently updated my MacBook Pro OS from 10.5.8 to 10.6.8 and can not open existing Illustrator5 files or save new files can someone help?
I think you have a corrupted upgrade. Do you have a backup of your old system?
Here's what you should do for now:
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1. -
I can not open in safe mode. It launches Utilities instead.
I tried to reinstall Mavericks but it stalled for over an hour.
I found a loose kernel in my HD fielder and deleted it.
Anny ideas? Thanks.
AllanUsing Safe Mode. What happens with a normal boot - same thing? If so then your startup volume needs to be reformatted and you need to reinstall OS X.
Install or Reinstall OS X from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
the Security button and set the Zero Data option to one-pass. Click on
the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.
This should install the version of OS X that you had installed. -
hi,my name is kutan.since i updated ios7 on my ipad;internet got very slow,i can not open facetime no more,i can not download or update anything from apple store! so this is just redicilous! please any help?
It is hardly Apple's fault that Epson can't/won't update their driver, but at least Epson suggest that you use the Gutenprint driver, which in any case is far better that what Epson offer.
You can get it here:
http://gimp-print.sourceforge.net/
You can download the latest version from here:
http://sourceforge.net/projects/gimp-print/
Have you downloaded the recent Apple update to Epson drivers?
http://support.apple.com/kb/DL1398 -
OS 10.8.4 (recent upgrade) and can not open a .dmg file
I am using an iMac 2.8 GHz Intel Core i7 and have recently upgraded to 10.8.4 and can not open any .dng file. It indicats that it is not recognizeable. How can I intall my downloaded software?
ThanksSomething else is going on then. Set up a test/new account. If the problems appears there too, then it means it's a system wide problem.
Another thing to try if you have not already done so is to disconnect all devices from your computer, repair permissions and restart your computer. Or do the following:
Mountain Lion Recovery
Boot up from your computer by holding down the command+r keys. This will take you to the recovery drive.
Select Disk Utility & hit Return.
In Disk Utility select the HD on the left & click on Repair Disk (bottom right).
Maybe you are looking for
-
How to transfer more than one files over internet at once?
hi, friends, I just wonder how to transfer more than one files from one computer to another over internet at once. Not using ftp. pls any one give me the solution.
-
Macbook pro running 10.4.11 can I get it upgraded?
What do I need to do to get it upgraded?
-
How can I search events inside my calendar with Lightening enabled?
I have Lightening enabled in Thunderbird. I have all my calendars working. I just can't see any way to search events. All my toolbars are selected. I see no search function. Is there one? Can someone offer assistance? Thanks!
-
Checking box to see my saved passwords un-checks itself. Help pls?
All of a sudden I am unable to view any of my saved passwords within Safari (ver. 7.1) > Preferences > Passwords ! Whenever I check the box to "Show passwords for selected websites", it instantly reverts the the box back to being "unchecked", thus, m
-
Travel management in ABAP-webdynpro(ECC-6.0)
Hi All, I have a requirement in which the screens of travel management has to be designed in ABAP-webdynpro. I know that screens are available in ESS-6.0 netweaver component but I want ABAP-webdynpro screens in ECC-6.0. I was just curious to know if