Can not open Active Directory Users and Computers

Problem Reported:
Out of the blue this has started happening:
When I go to "Active Directory Users and Computers" I get this message.
"MMC cannot open the file C:\WINDOWS\system32\dsa.msc.
This may be because the file does not exist, is not an MMC console, or was created by a later version of MMC. This may also be because you do not have sufficient access rights to the file.
Additional information:
This is a server that has been in use for 2+ years with active directory users that can and do login everyday.
As far as I know the system has no backup.
dsa.msc IS located in the system32 folder
I am using the administrator account.
OS:
Microsoft Windows Server 2003 R2
Standard x64 Edition
Service Pack 2
Please help with detail. Thank you.

Have you tried to uninstall ADUC administrative tool and re-install it again? If no, please give a try.
This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Get Active Directory User Last Logon
Create an Active Directory test domain similar to the production one
Management of test accounts in an Active Directory production domain - Part I
Management of test accounts in an Active Directory production domain - Part II
Management of test accounts in an Active Directory production domain - Part III
Reset Active Directory user password

Similar Messages

Active directory users and computers wont start on a dc, "the server is not operational"

In our environment, we have 3 dc's
two which run server 2008 (they work perfectly)
and one never off branch dc that runs server 2008 r2.
We have been having some problems where we feel the replication isnt up too speed(stuff could take up to 24 hours to replicate) and now when i tried opening active directory users and computers i am met with this error window:
We have a third party DNS solution.
How do i troubleshoot this issue?

dc01 (which replicates perfectly with dc02, and vise versa)
dcdiag /test:dns
C:\Users\adminuser>dcdiag /test:dns
Domain Controller Diagnosis
Performing initial setup:
Done gathering initial info.
Doing initial required tests
Testing server: Hostingpartner\ourdc01
Starting test: Connectivity
......................... ourDC01 passed test Connectivity
Doing primary tests
Testing server: Hostingpartner\ourdc01
DNS Tests are running and not hung. Please wait a few minutes...
Running partition tests on : ForestDnsZones
Running partition tests on : DomainDnsZones
Running partition tests on : Schema
Running partition tests on : Configuration
Running partition tests on : int
Running enterprise tests on : int.domain.com
Starting test: DNS
Test results for domain controllers:
DC: ourdc01.int.domain.com
Domain: int.domain.com
TEST: Delegations (Del)
Error: DNS server: ourdc02.int.domain.com. IP:xx.xx.xx.32 [Broken delegated domain domaindnszones.int.domain.com.]
Error: DNS server: ourdc02.int.domain.com. IP:xx.xx.xx.32 [Broken delegated domain forestdnszones.int.domain.com.]
Summary of test results for DNS servers used by the above domain controllers:
DNS server: xx.xx.xx.32 (ourdc02.int.domain.com.)
2 test failures on this DNS server
Delegation is broken for the domain domaindnszones.int.domain.com. on the DNS server xx.xx.xx.32
Delegation is broken for the domain forestdnszones.int.domain.com. on the DNS server xx.xx.xx.32
Summary of DNS test results:
Auth Basc Forw Del Dyn RReg Ext
Domain: int.domain.com
ourdc01 PASS PASS PASS FAIL n/a PASS n/a
......................... int.domain.com failed test DNS
dcdiag on dc01(which can replicate with dc02)
C:\Users\adminuser>dcdiag
Domain Controller Diagnosis
Performing initial setup:
Done gathering initial info.
Doing initial required tests
Testing server: hostingpartner\ourdc01
Starting test: Connectivity
......................... OURDC01 passed test Connectivity
Doing primary tests
Testing server: hostingpartner\ourdc01
Starting test: Replications
[Replications Check,OURDC01] DsReplicaGetInfoW(PENDING_OPS) failed with error 8453,
Win32 Error 8453.
......................... OURDC01 failed test Replications
Starting test: NCSecDesc
......................... OURDC01 passed test NCSecDesc
Starting test: NetLogons
[OURDC01] User credentials does not have permission to perform this operation.
The account used for this test must have network logon privileges
for this machine's domain.
......................... OURDC01 failed test NetLogons
Starting test: Advertising
......................... OURDC01 passed test Advertising
Starting test: KnowsOfRoleHolders
......................... OURDC01 passed test KnowsOfRoleHolders
Starting test: RidManager
......................... OURDC01 passed test RidManager
Starting test: MachineAccount
......................... OURDC01 passed test MachineAccount
Starting test: Services
......................... OURDC01 passed test Services
Starting test: ObjectsReplicated
......................... OURDC01 passed test ObjectsReplicated
Starting test: frssysvol
......................... OURDC01 passed test frssysvol
Starting test: frsevent
......................... OURDC01 passed test frsevent
Starting test: kccevent
......................... OURDC01 passed test kccevent
Starting test: systemlog
An Error Event occured. EventID: 0xC0002719
Time Generated: 04/04/2013 15:04:29
(Event String could not be retrieved)
An Error Event occured. EventID: 0xC0002719
Time Generated: 04/04/2013 15:04:50
(Event String could not be retrieved)
An Error Event occured. EventID: 0xC0002719
Time Generated: 04/04/2013 15:10:56
(Event String could not be retrieved)
An Error Event occured. EventID: 0xC0002719
Time Generated: 04/04/2013 15:11:17
(Event String could not be retrieved)
......................... OURDC01 failed test systemlog
Starting test: VerifyReferences
......................... OURDC01 passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CrossRefValidation
......................... ForestDnsZones passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Running partition tests on : DomainDnsZones
Starting test: CrossRefValidation
......................... DomainDnsZones passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Running partition tests on : Schema
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Running partition tests on : Configuration
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Running partition tests on : int
Starting test: CrossRefValidation
......................... int passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... int passed test CheckSDRefDom
Running enterprise tests on : int.domain.com
Starting test: Intersite
......................... int.domain.com passed test Intersite
Starting test: FsmoCheck
......................... int.domain.com passed test FsmoCheck
The problematic dc03:
Dcdiag gives the same output as dcdiag /test:dns
C:\Users\adminuser>dcdiag
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = OURDC03
Ldap search capabality attribute search failed on server NTSDC03, return
value = 81
We have an infoblox dns server on ip address xxx.y.y.251.
first error in event logs on dc03:
error 1863
This is the replication status for the following directory partition on this directory server.
Directory partition:
CN=Configuration,DC=int,DC=domain,DC=com
This directory server has not received replication information from a number of directory servers within the configured latency interval.
Latency Interval (Hours):
24
Number of directory servers in all sites:
2
Number of directory servers in this site:
2
The latency interval can be modified with the following registry key.
Registry Key:
HKLM\System\CurrentControlSet\Services\NTDS\Parameters\Replicator latency error interval (hours)
To identify the directory servers by name, use the dcdiag.exe tool.
You can also use the support tool repadmin.exe to display the replication latencies of the directory servers. The command is "repadmin /showvector /latency <partition-dn>".
i have also go several warning 2088, 2093, 2087.
And errors 1863 pointing to different directory partitions like schema/configuration/domaindnszones/forestdnszones

Windows 2008 Server - Cannot run Active Directory Users and Computers

Hi,
I am running Windows 2008 Server with latest windows updates installed. Directory Services Role also.
I attempt to open Active Directory Users and Computers tool and I get a;
Microsoft Visual C++ Runtime Library error;
"The Application has requested the runtime to terminate it in a unusual way. Please contact the application's support team for more information"
I click ok, then get the following debug info;
Problem signature:
Problem Event Name: APPCRASH
Application Name: mmc.exe
Application Version: 6.0.6001.18000
Application Timestamp: 47919524
Fault Module Name: msvcrt.dll
Fault Module Version: 7.0.6001.18000
Fault Module Timestamp: 4791ad6b
Exception Code: 40000015
Exception Offset: 0000000000029b06
OS Version: 6.0.6001.2.1.0.272.7
Locale ID: 3081
Additional Information 1: 43aa
Additional Information 2: cf3a46656318492c1997480001b6b0e0
Additional Information 3: 3837
Additional Information 4: 92f72e0d0589ff77cef51e0a413aeff6
Read our privacy statement:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409
If someone could please assist, it would be very much appreciated.
Regards
B

Hi,
To solidly troubleshoot this kind of issue, we need to debug dump file. A suggestion would be to contact Microsoft Customer Service and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
To obtain the phone numbers for specific technology request please take a look at the web site listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
However, I am also glad to share my research.
Some third party applications may lead to this error. Please check if you install other third party applications on Windows server 2008?
Also, please follow the article below to perform necessary steps to see how it's going?
FIX: You receive an "invalid page fault in module MSVCRT.DLL" error message after you install the run-time libraries from Visual C++ 6.0
http://support.microsoft.com/kb/190536/en-us
Hope this helps.
Best wishes
Morgan Che

RSAT - Active Directory Users and Computers

After installing build 9879, I cannot open Active Directory Users and Computers. I get error message: MMC could not create the snap in. I do not see KB2693643 under installed updates anymore. I've tried to reinstall KB2693643
but I get error code 0x8024001d. Any help would be appreciated.

Hi readabook,
To resolve windows update error 0x8024001d, please rename Software Distribution folder:
1. Click on Start, choose run type in CMD and click OK.
2. Type NET STOP WUAUSERV and press Enter. (leave this window open for later use)
3. Open My Computer
4. Find the folder c:\Windows\SoftwareDistribution
5. Right mouse click on SoftwareDistribution and choose rename call the folder "SDold"
6. Return to the black Window that opened in step 1 type NET START WUAUSERV and click enter
Alex Zhao
TechNet Community Support

Not able to open active directory user and computer in windows server 2008r2

Hi All techies,
i would like to know one issue which i am facing mostly, i have created 5 virtual machine all with window server2008r2 and one windows 7 on vm-ware now when ever i start my virtual machines everything going rite but when i try to open active directory user/
computer or domain and trust i get a following error "data from active directory user and computers is not available from dc(null) bcoz unspecified error" even when i chk in events log its give me no help, and after 15-30 min everything works good
Please let me know the cause of it and really appreciate it .
Thanks
Atul

You need to ensure that
1. group policy that says "wait for network before logon" is applied to all computers including servers and workstations is applied
2. DNS record exists for all DCs in DNS
3. If there are multiple Domain Controllers in Forests, then they point them as secondary DNS server. This way they will be able to resolve IPs if local DNS server service takes time to start.
As Chris mentioned, you need to start all DCs first, give a time of 5 minutes and then start member servers and workstations for successful logon.
- Sarvesh Goel - Enterprise Messaging Administrator

How to create "folders" in Active Directory Users and Computers?

Hello Community
    In Windows Server 2008R2 when you go to Active Directory Users and Computer
you will see icons of folders such as:
    - Builtin has a folder icon
    - Computers has a folder icon
    - ForeignSecurityPrinicpals has a folder icon
    - Domain Controller as a folder icon
    - Managed Service Accounts has a folder icon
    - Users has a folder icon
    All of the above folders are visually identical.
    If you right click and select “File” – “New”
on any of the selections the icon
will not look like the folder icon they have their own icons which look different
from the "Folder" icon.
    I would like to create a “Folder” that looks just visually exactly like the ones
mentioned above, how can I create those types of Folders in Active Directory User
and Computers?
    Note: I would like to put users in the folders.
    Thank you
    Shabeaut

Hi,
you should use OUs (an OU is they type of object (folder) that is available for you to easily create.
The object type you are asking about is a "container", and there are various reasons why an OU is more flexible (applying GPO, etc).
Refer: Delegating Administration by Using OU Objects
http://technet.microsoft.com/en-us/library/cc780779(v=ws.10).aspx
and the sub-articles:
Administration of Default Containers and OUs
http://technet.microsoft.com/en-us/library/cc728418(v=ws.10).aspx
Delegating Administration of Account and Resource OUs
http://technet.microsoft.com/en-us/library/cc784406(v=ws.10).aspx
Also: http://technet.microsoft.com/en-us/library/cc961764.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Hide all except one object in Active Directory Users and Computers.

Hello,
I have a question.. I need to allow to one group of "administrators" creating users in one OU and adding computers to the domain, nothing else. I allowed them to log on DC using the GPO "Allow log on locally", because I don't want to give
them administrator rights, I allowed them to do these operations on one OU through delegation wizard and now I need to make all OUs, groups etc. invisible to them except this OU. What is the best way how to achieve this? Thank you...
d.

I would disable the ability to allow them to login. I suggest to create a Computers OU that you can delegate to the "admins" to add computers, and don't use the default Computers container.
I assume the admins are using Windows 7 or newer. You can customize an RSAT installation to just provide the ADAC.
Description of Remote Server Administration Tools for Windows 7:
http://support.microsoft.com/default.aspx/kb/958830
Remote Server Administration Tools for Windows 7:
http://technet.microsoft.com/en-us/library/ee449475(WS.10).aspx
Remote Server Administration Tools for Windows 7
http://www.microsoft.com/downloads/details.aspx?FamilyID=7D2F6AD7-656B-4313-A005-4E344E43997D&displaylang=en
Customizing - Installing Remote Server Administration Tools (RSAT) for Windows 7
http://www.petri.co.il/remote-server-administration-tools-for-windows-7.htm
Or if you want to chop it down and control it further, create a custom ADUC with just that OU you've delegated. I've done this in the past and worked fine for my customer:
Delegate an Organizational Unit (OU) in Active Directory Users and Computers (ADUC), then create a custom MMC or customized RSAT
http://blogs.msmvps.com/acefekay/2014/09/04/delegate-an-organizational-unit-ou-in-active-directory-users-and-computers-aduc-then-create-a-custom-mmc-or-customized-rsat/
Ace Fekay
MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
This posting is provided AS-IS with no warranties or guarantees and confers no rights.

Server 2008 R2 DNS Server can not open active directory erro 4000

The DNS server was unable to open Active Directory. This DNS server is configured to obtain and use information from the directory for this zone and is unable to load the zone without it. Check that the Active Directory is functioning properly
and reload the zone. The event data is the error code. Error 4000
This just started happening yesterday. Also File service and print server is unable to contact because of this error. I have no lookup zones. When I try and go to the DNS server I get a message The server VETSALDC could be contacted The error was Access
Denied. Would you like to add it anyway?
PLEASE HELP

Hi,
According to your description, my understanding is that DNS unable to open Active Directory with error 4000.
This happens when that particular DC/DNS server has lost its Secure channel with itself or PDC. This can also happen in a single DC environment where that DC/DNS server holds all the FSMO roles and is pointing to itself as Primary DNS server.
You may check AD DS using command line “DCdiag” (run as administrator). besides, you may try to stop and restart AD DS service(detailed steps reference the link:
http://technet.microsoft.com/en-us/library/cc732714(WS.10).aspx ), make sure that the AD DS is running correctly.
Then restart the DNS service, detailed steps reference the link:
http://technet.microsoft.com/en-us/library/cc735673(v=ws.10).aspx .
If the problem still exits, is there any other DC or DNS on your network? Post the TCP/IP parameters (ipconfig /all) of DC and DNS here.
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Active Directory Domain Services crash after Administrator renames object in Active Directory Users and Computers

Hello.
We have two domain controllers - node1 (Windows 2008 R2) and node2 (Windows 2012 R2). When administrator connects to node2 and tries to rename some object in AD (for example, user) AD Domain Services crashes and reboot server after 60 seconds.
In Events I can see these messages:
Log Name:      Directory Service
Source:        Microsoft-Windows-ActiveDirectory_DomainService
Date:          04.03.2014 12:37:58
Event ID:      1173
Task Category: Internal Processing
Level:         Warning
Keywords:      Classic
User:          domain\admin
Computer:      NODE2.domain.example
Description:
Internal event: Active Directory Domain Services has encountered the following exception and associated parameters.
Exception:
c0000005
Parameter:
0
Additional Data
Error value:
7ffc7c38e45d
Internal ID:
0
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-ActiveDirectory_DomainService" Guid="{0e8478c5-3605-4e8c-8497-1e730c959516}" EventSourceName="NTDS General" />
    <EventID Qualifiers="32768">1173</EventID>
    <Version>0</Version>
    <Level>3</Level>
    <Task>9</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8080000000000000</Keywords>
    <TimeCreated SystemTime="2014-03-04T06:37:58.116264800Z" />
    <EventRecordID>881</EventRecordID>
    <Correlation />
    <Execution ProcessID="572" ThreadID="2580" />
    <Channel>Directory Service</Channel>
    <Computer>NODE2.domain.example</Computer>
    <Security UserID="S-1-5-21-3794920928-4165619442-305938157-2047" />
</System>
<EventData>
    <Data>c0000005</Data>
    <Data>7ffc7c38e45d</Data>
    <Data>0</Data>
    <Data>0</Data>
</EventData>
</Event>
Log Name:      Application
Source:        Microsoft-Windows-Wininit
Date:          04.03.2014 12:37:58
Event ID:      1015
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      NODE2.domain.example
Description:
A critical system process, C:\Windows\system32\lsass.exe, failed with status code c0000005. The machine must now be restarted.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Wininit" Guid="{206f6dea-d3c5-4d10-bc72-989f03c8b84b}" EventSourceName="Wininit" />
    <EventID Qualifiers="49152">1015</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-03-04T06:37:58.000000000Z" />
    <EventRecordID>189578</EventRecordID>
    <Correlation />
    <Execution ProcessID="0" ThreadID="0" />
    <Channel>Application</Channel>
    <Computer>NODE2.domain.example</Computer>
    <Security />
</System>
<EventData>
    <Data>C:\Windows\system32\lsass.exe</Data>
    <Data>c0000005</Data>
</EventData>
</Event>
Log Name:      Application
Source:        Application Error
Date:          04.03.2014 12:37:58
Event ID:      1000
Task Category: (100)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      NODE2.domain.example
Description:
Faulting application name: lsass.exe, version: 6.3.9600.16384, time stamp: 0x5215e25f
Faulting module name: ntdsai.dll, version: 6.3.9600.16421, time stamp: 0x524fcaed
Exception code: 0xc0000005
Fault offset: 0x000000000019e45d
Faulting process id: 0x23c
Faulting application start time: 0x01cf3773fe973e1b
Faulting application path: C:\Windows\system32\lsass.exe
Faulting module path: C:\Windows\system32\ntdsai.dll
Report Id: 85cfbe32-a367-11e3-80cc-00155d006724
Faulting package full name:
Faulting package-relative application ID:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-03-04T06:37:58.000000000Z" />
    <EventRecordID>189576</EventRecordID>
    <Channel>Application</Channel>
    <Computer>NODE2.domain.example</Computer>
    <Security />
</System>
<EventData>
    <Data>lsass.exe</Data>
    <Data>6.3.9600.16384</Data>
    <Data>5215e25f</Data>
    <Data>ntdsai.dll</Data>
    <Data>6.3.9600.16421</Data>
    <Data>524fcaed</Data>
    <Data>c0000005</Data>
    <Data>000000000019e45d</Data>
    <Data>23c</Data>
    <Data>01cf3773fe973e1b</Data>
    <Data>C:\Windows\system32\lsass.exe</Data>
    <Data>C:\Windows\system32\ntdsai.dll</Data>
    <Data>85cfbe32-a367-11e3-80cc-00155d006724</Data>
    <Data>
    </Data>
    <Data>
    </Data>
</EventData>
</Event>
In node2 we installed all available updates and hotfixes.

Hi Azamat Hackimov,
Regarding to error messages, it seems that the
ntdsai.dll file caused the issue. Based on current situation, please use
sfc /scannow command to scan protected system files and check if find error and repair. Meanwhile, you can also navigate to the location of this DLL file and confirm details.
In addition, Windows Server 2012 R2 has reboot unexpectedly. Please check if you get some dump file and then analysis it. It may help us to find the root reason. Please refer
to the following KB.
How to read the small dump memory dump file that is created by Windows if a crash occurs.
http://support.microsoft.com/kb/315263/en-us
By the way, it is not effective for us to debug the crash dump file here in the forum. If this issues is a state of emergency for you. Please contact Microsoft Customer Service
and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
To obtain the phone numbers for specific technology request, please refer to the web site listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
Hope this helps.
Best regards,
Justin Gu

NSS4000 Can not see Active Directory Users

Hi,
I recently brought a NSS4000 the documentation said upgraded the firmware straight away.
This completed successfully to 1.16.Also this version of firmware is very SLOOWW!!!!!!
I can get the box to join to the domain ok, but when I click Access-Users it does not show any users.
If I change the Domain name it then complains that it does not match the relam.
We have another one of these units which works ok fine with Active directory running firmware 1.11.
Have tried Downgrading the firmware but it is not allowed.
Many Thanks

I see answer to this product in other discussioin board. You may want to post your question there also.
Cisco Support Community > NetPro > Small Business > Technologies for Small Businesses

Active Directory Users and Computer not displaying column data?

I am running Windows 8.1 Enterprise with RSAT installed. My Domain controllers are Server 2008 R2.
I am having and issue with Active Directory Users and Computers. Typically I will turn on Advanced Features and then add Columns for Email address and Display Name. This for example allows me to easily export lists of users and there email
addresses among other things.
The issue is that on my Windows 8.1 client, the columns for Email and Display Name are empty. It simply will not display this information. It only displays Name, TYpe and Description.
If I use a Windows 7 client, the information displays correctly.
Has anyone run into this issue or heard of this problem when using ADUC on Windows 8.1?

ADUC is an AD tool that is no longer being improved, with Microsoft now focusing on ADAC (Administrative Center). In 8.1, it has improved quite a bit since 7. You can also just try using the
ActiveDirectory PowerShell Module, which is easy to use and fairly powerful. It can be simple to export lists, and the module for AD is included with RSAT tools.
Example:
Import-Module ActiveDirectory
Get-ADUser -Filter {Manager -eq "John.Smith"} -Properties DisplayName,Mail | Export-Csv dump.csv -NoTypeInformation
So, recommendation: either use ADAC, or PowerShell -- ADUC is part of the wave of deprecation.

TS1506 In most of my email attachment the logo ( Mimi attachment ) show and I can not open that attachment , why and how to solve this problem ??? iPad 2, iOS 7

In most of my email attachment the logo ( Mimi attachment ) show and I can not open that attachment , why and how to solve this problem ???
iPad 2, iOS 7

When did this start? What was the last thing you changed before problem started?
Have you tried sending the attachment from a different account. Have a friend send you an attachment. Get a gmail account.
Send the email with attachments to two different accounts one to your ipad and the other to a gmail account in a web browser and not on an iPad. See if you can read the ones to the gmail account.
You did reboot your ipad?
Standard stuff for ipad.
http://www.my-iguru.com/ipad/ipad-hints-tips/ipad-viewing-saving-email-attachmen ts.php

How can i open the directory/folder and read all the files inside it in order and then close it?

How can i open the directory/folder and read all the files inside it in order and then close it? any example would be nice.
thanks

In the File I/O>>Advanced File Functions Palette is a function named "List directory". This function will give you two arrays. One contains the names of all subdirectories the other the names of all files. If you want to sort them by name use the array sort function. If you want to sort them by another attribute use the File/Directory Info function to get more data. Use a cluster which contains the attribut to sort and the original index of the name. Then sort this array.
Waldemar
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

I have a 3g iphone I can not open it to locked and can help me thanks, I have a 3g iphone I can not open it to locked and can help me thanks

I have a 3g iphone I can not open it to locked and can help me thanks

I presume you mean that you have a passcode to the screen lock that you've forgotten. If that is correct, you will need to restore the iPhone from the computer to which the iPhone is synced. For information and instructions, see:
http://support.apple.com/kb/ht1212
If that will not work, you'll need to put the iPhone into Recovery Mode and then try the Restore again:
http://support.apple.com/kb/ht1808
If that still doesn't work, as a last resort try DFU mode:
http://www.iclarified.com/entry/index.php?enid=1034
If you're not referring to the screen lock, please post back and clarify.
Regards.

HT201412 my wifi button does not working / it looks grey and can not open it... and my some applications does not working too ... please help me ... I bought this I phone from Beirut/Lebanon and i live in Turkey...

my wifi button does not working / it looks grey and can not open it... and my some applications does not working too ... please help me ... I bought this I phone from Beirut/Lebanon and i live in Turkey...

Here you go:
http://support.apple.com/kb/ts1559

Can not open Active Directory Users and Computers

Similar Messages

Maybe you are looking for