Can not open Artist Lesson

After a few Problems with the latest Update (10.5.7) i had to reinstall the System 10.5.6. Everything is perfect again but the Garageband instrumental and Artist lessons are confusing me.
When i open the Lesson it says me that a .caf file couldn't being found. but when i take a look in the library folder and show the package contents it is there.
I can skip the message and the lesson starts but without sound.
I even replaced the file with an older one from Timemachine, the same thing.
Has anybody an idea?!
Message was edited by: M_L

Problem is solved here: http://discussions.apple.com/thread.jspa?threadID=1885074&tstart=0
I hadn't time to try it yet, but i guess it works...good luck

Similar Messages

Desk top pc windows 7 ultimate, after update of itunes can not open under my account shows up very light on task bar but opens fine under my wifes account on same computer

Windows 7 ultimate, after update can not open itunes under my account shows up very light on task bar, but opens fine under other accounts on same computer

Hi M0M1!
I have an article for you that seems to describe your issue and can provide some helpful troubleshooting steps for this issue:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Specifically, you will want to focus on this section of the article:
User-specific troubleshooting
If you experience the issue in one particular user account, the suggestions below may resolve the issue. Before proceeding, you'll need to make hidden files and folder visible in Windows using steps 1-5.
Remove iTunes Preference files. Some of the files that iTunes stores settings and preferences in may be unusable. iTunes saves its preferences in two folders. Move one of them to the desktop and test to see if the issue persists. If it does, move it back and remove the second folder. The locations for the preference folders are:
c:\Users\username\AppData\Local\Apple Computer\iTunes
c:\Users\username\AppData\Roaming\Apple Computer\iTunes
Create a new iTunes Library.
Hold the Shift key while opening iTunes. You'll be asked to choose an iTunes library.
Choose Create Library.
In the following window, select a location to save the new iTunes Library.
Click Save. iTunes will open the new library. After you close iTunes, you can always select the original library by holding the Shift key while opening iTunes.
Recreate your iTunes Library. If your iTunes library has become unusable, rebuilding it may resolve the issue.
Check for issues with content files. Sometimes an audio file can cause iTunes to quit unexpectedly or stop responding when it's analyzing gapless playback information. To determine which file may be causing the issue, follow the steps below:
Quit iTunes.
Navigate to the iTunes folder:
Windows Vista: c:\users\username\Music\iTunes
Windows 7 and Windows 8: c:\users\username\My Music\iTunes
Move the iTunes Library.itl file to your desktop.
Open iTunes. You shouldn't see any content in iTunes.
Choose File > Add Folder to Library.
Navigate to the folder where your music is located:
Windows Vista: c:\users\username\Music\iTunes\iTunes Media
Windows 7 and Windows 8: c:\users\username\My Music\iTunes\iTunes Media
Choose an artist, album, or song to add to the library.
Wait for iTunes to successfully add the item to your library and perform the gapless playback scan.
If successful, continue adding songs to your library.
If there is an issue with one of your files, you'll notice your issue reappear after you add it to the library. You should repeat these steps, being careful not to add the files that caused the issue.
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden

Process.start("winword", filename) can not open file with space in the path and name

Hi,
I am trying to write a class which can open file with selected application. for simplicity, now I just hard code the varaibles.
the problem: if the path or file name has space in it, even it exist, winword still can not open it.
could someone kindly show me what I did wrong and how to do it properly.
Thanks in advance.
Belinda
public static class FileOpen
public static void info()
string path = @"c:\a temp folder\aaa 1.txt";
if (File.Exists(path))
    // the file I am using in the sample does exist
     MsgBox.info("yes");
else
     MsgBox.info("no");
// working
//Process.Start("winword", "c:\\aaa.txt");
// not working
//Process.Start("winword", "c:\aaa.txt");
// not working
Process.Start("winword", "c:\\a temp folder\\aaa 1.txt");
// not working
Process.Start("winword", path);

string AppPath;
AppPath = ReadRegistry(Registry.CurrentUser, "Software\\FabricStudio", "TARGETDIR", value).ToString() + @"help";
string FileName = "'"+ AppPath + "\\ImageSamples.doc" + "'";
try
System.Diagnostics.Process.Start("Winword.exe", FileName);
can any body please help for this.
where i am making mistake?

Error message when updating Itunes...can not open Itunes program

I am recieving error message when updating Itunes for my computer. The error message reads "MSVCR80.dll is missing and the other error message reads Error 7 (Windows error 126)" I can not open my Itunes. I have reloaded the Itunes onto my computer but still have the same error messages. Please help.

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99364)

Can not open some PDFs in Outlook

I can not open PDFs in 2010 Outlook from just one particular email. Other PDFs from other emails open fine.
have uninstalled and re-installed latest Adobe Reader.
How do I fix?

Hi,
Do you mean you can't open PDFs send from a particular email address or just the PDFs in one particular email?
Can you view the PDF from web access?
In addition, please try Anil's suggestion, download the pdf to local and try to open it locally.
Please let me know the result.
Best Regards,
Steve Fan
TechNet Community Support

I can not open the Editor in Photoshop Element 12

Hallo and sorry for my bad english!
I can not open the editor in Photoshop Elements 12.
After clicking the stands ".... only the workspace is loaded", but nothing happens.
After installation in May, he has about a month and suddenly no longer works.
What can I do?

Version CS3
Adobe DNG Converter and Camera Raw 4.6 update
6.2MB
10/10/2008
Camera Raw 4.6 update
3.5MB
10/10/2008
Camera Raw 4.5 update
3.5MB
7/28/2008
Adobe DNG Converter and Camera Raw 4.5 update
6.1MB
7/28/2008
Adobe DNG Converter and Camera Raw 4.4.1 update
5.4MB
4/10/2008
Camera Raw 4.4.1 update
3.3MB
4/10/2008
Camera Raw 4.3.1 update
3.3MB
11/15/2007
Adobe Photoshop 10.0.1 update for Adobe Photoshop CS3
72.8MB
11/15/2007
Adobe DNG Converter and Camera Raw 4.3.1 update
6.1MB
11/15/2007
Adobe DNG Converter and Camera Raw 4.2 update
5.9MB
9/13/2007
Camera Raw 4.2 update
3.2MB
9/13/2007
Camera Raw 4.1 update
3.2MB
5/30/2007
Adobe DNG Converter and Camera Raw 4.1 update

I can not open the file in Photoshop...

I can not open the file in Photoshop after formattatto pc.
I get the following error "could not complete your request because there is an error in the program
Please me!
Thank you

Version CS3
Adobe DNG Converter and Camera Raw 4.6 update
6.2MB
10/10/2008
Camera Raw 4.6 update
3.5MB
10/10/2008
Camera Raw 4.5 update
3.5MB
7/28/2008
Adobe DNG Converter and Camera Raw 4.5 update
6.1MB
7/28/2008
Adobe DNG Converter and Camera Raw 4.4.1 update
5.4MB
4/10/2008
Camera Raw 4.4.1 update
3.3MB
4/10/2008
Camera Raw 4.3.1 update
3.3MB
11/15/2007
Adobe Photoshop 10.0.1 update for Adobe Photoshop CS3
72.8MB
11/15/2007
Adobe DNG Converter and Camera Raw 4.3.1 update
6.1MB
11/15/2007
Adobe DNG Converter and Camera Raw 4.2 update
5.9MB
9/13/2007
Camera Raw 4.2 update
3.2MB
9/13/2007
Camera Raw 4.1 update
3.2MB
5/30/2007
Adobe DNG Converter and Camera Raw 4.1 update

CAN NOT OPEN CANON EOS20D RAW FILE IN PHOTOSHOP CS2

I had Photoshop CS2 installed on my PC some years ago and could open my raw files from my canon eos 20d. I changed the hard drives in my pc to solid state drives and had to reinstall photoshop cs2. I could not activate photoshop as it was too old a version so I had to download from adobe website with their activation code. Now, I can not open any of my canon eos 20d files. I have taken some now photos just a few days ago and the problem still arises. I get the message that it does not recognise this type of file. Any ideas?

You downloaded, extracted (unzipped) the Camera_Raw_3_7.zip and copied/moved the Camera Raw.8bi to
C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\CS2 (windows 64 bit system)
or
C:\Program Files\Common Files\Adobe\Plug-Ins\CS2 (windows 32 bit system)
Camera Raw 3.7 update for photoshop cs2 Windows
Adobe - Photoshop : For Windows : Camera Raw 3.7 update
other cs2 updates
Adobe - Photoshop : For Windows
Adobe - Bridge : For Windows
Adobe - Creative Suite : For Windows

I can not open adobe files. mainly ones that end in doc. I purchased the 19.99 to convert .doc files

I can not open adobe files that end in .doc. I purchased the 19.99 to convert doc to pdf and I still cant open. I get an error reading.

Hi,
Which Adobe Service did you purchased?
If you have purchased CreatePDF please visit: https://createpdf.acrobat.com/SignIn.html
Sign in with your Adobe ID and password, and then convert your word doc into PDF.
Please let me know if that works.
If you have Adobe Reader, you cannot convert .doc file to .PDF by drag and drop.
~ Aditya

I can not open the messeges in hotmail , but explorer can open them !

I can not open hotmail messages by fire fox 4 , but internet explorer can open the messages without any problems. I checked java in my pc and it is all right. I try many things like change security and privacy options but I can't solv the problem.

Version CS3
Adobe DNG Converter and Camera Raw 4.6 update
6.2MB
10/10/2008
Camera Raw 4.6 update
3.5MB
10/10/2008
Camera Raw 4.5 update
3.5MB
7/28/2008
Adobe DNG Converter and Camera Raw 4.5 update
6.1MB
7/28/2008
Adobe DNG Converter and Camera Raw 4.4.1 update
5.4MB
4/10/2008
Camera Raw 4.4.1 update
3.3MB
4/10/2008
Camera Raw 4.3.1 update
3.3MB
11/15/2007
Adobe Photoshop 10.0.1 update for Adobe Photoshop CS3
72.8MB
11/15/2007
Adobe DNG Converter and Camera Raw 4.3.1 update
6.1MB
11/15/2007
Adobe DNG Converter and Camera Raw 4.2 update
5.9MB
9/13/2007
Camera Raw 4.2 update
3.2MB
9/13/2007
Camera Raw 4.1 update
3.2MB
5/30/2007
Adobe DNG Converter and Camera Raw 4.1 update

Can not open any open any web pages. Receive the following error message (Error code: sec_error_library_failure)

I can not open any websites using Mozilla browser. I have attached a screen shot of the error message that I receive. You will also find it below: .
Secure Connection Failed
An error occurred during a connection to www.google.com. security library failure. (Error code: sec_error_library_failure)
The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
Please contact the website owners to inform them of this problem.
This error appears on all pages that I try to browse to. All other browsers work fine on my computer.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that temporarily turns off hardware acceleration, resets some settings, and disables add-ons (extensions and themes).
'''If Firefox is open,''' you can restart in Firefox Safe Mode from the Help menu:
* Click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
'''If Firefox is not running,''' you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".
;[[Image:SafeMode-Fx35]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, theme, or hardware acceleration. Please follow the steps in the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.

Can not open a particular web site

Hi, I always tried to open one web site and it used to open well in Firefox and IE. but since last few days it stopped opening both in FF and IE. It gives error as
1. The connection has timed out The server at www.eng-tips.com is taking too long to respond.
2.If you are unable to load any pages, check your computer's network
connection.
3.If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
I Google with all above questions and tried most of the solutions, nothing works. Wondering why it stooped opening suddenly ? I tried to open it from other locations just to check if its down but its fine and working but can not open from my home internet. Any suggestions? Thanks in advance.

Did you [https://support.mozilla.org/en-US/kb/Error%20loading%20web%20sites#w_try-clearing-firefoxs-cookies-and-cache Try clearing Firefox's cookies and cache] ?
if this is not helpful see : [https://support.mozilla.org/en-US/kb/Error%20loading%20web%20sites Error loading web sites]
http://kb.mozillazine.org/Error_loading_any_website
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

Can not open my web page?

Installed my new 2T unit 5 days ago, it was fine till this afternoon. I can not open web page or connect to internet. (wired or wirelessly)
No issue with my cable modem as i tested by pluging wire direct from the modem.
"Green" light in front is OK, i have to unplug power and plug power back in after 10 sec to restore the unit to function again.
I read about the new time capsule will loss connections over time, wonder if anyone has experienced this problem in the past?

Hi BigChinaD,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
Resetting an AirPort Base Station or AirPort Time Capsule FAQ
http://support.apple.com/kb/HT3728
Cheers,
- Judy

Can not open Web from Nokia N81

Hi
My Nokia N81 worked fine until today
I just connected it to PC Suite and made a synchronization - now I have folowing problem - I can not open web-browser any more.
When I go into menu and then try to open Icon web - screens becames blue (desctopimage) for a second and then I'm landing again in menu just as it was before click on icon
What can be the reason of this problem?
Similar happened also with N-Gage Icon. I've tried it with memory card and without it - the result is the same - I can not go into web-section of my Nokia

Hi,
It seems that some faults has occurred during
the synchronization. You should re-set your
internet settings. If the issue persists your
phone will need reformat.
Regards.
Fattan

Can Not Open Mail CNOM

-The application Mail quit unexpectedly. Mac OS X and other applications are not affected. Click Relaunch to launch the application again. Click Report to see more details or send a report to Apple.
The above error message appears after I attempt to open the Mail application. Recently the Mail icon was a question mark, however it was found but still clicking on it I can not open Mail. After attempting to click Relaunch twice in a row, during a third time the follow error message appears:
-Do you want to resent application settings for Mail? The application quit unexpectedly after itwas relaunched. Resetting the application settings may fix the problem. You will be givethe opportunity to restore your original settings when you quit the applications.
When I click Reset and Relaunch I am brought back the error mentioned I previously encountered first, ergo the whole problem beings again, and the same thing happens again when I click Relaunch.
When I click Ignore or Do Not Relaunch the application quits, of course. When I click Report the application sends a 'report' page.
Somebody please help me get my mail working again. Thank you.

Really? Nobody has any idea?

Can not open Artist Lesson

Similar Messages

Maybe you are looking for