Can not open Firefox application - not supported on this archetecture
I have been able to use Firefox in the past, but when I tried upgrading to FireFox 4, I get an error msg: that it is not supported on this architecture.
Today, I have a new test result that the user account is allowed to access internet, but still can not access D drive.
The user can not change the IE's internet temporary files location.
I can not open the flex application from yahoo server.
Is there any method to execute flex application without temporary files support?
Thank you very much.
Similar Messages
-
When I tried to open Firefox 4 a dialogue box opened stating "Can't open the application Firefox because it is not supported on this architecture"
For older Macs that aren't supported in Firefox 4.0, try TenFourFox for PowerPC's running Mac 10.4.11 & 10.5.8 . <br />
http://www.floodgap.com/software/tenfourfox/ -
Firefox won't open: "Firefox isn't supported by this architecture" (Mac)
I had Firefox installed for several years, but it couldn't be updated: in 'preferences' the 'automatic update Firefox'-zone was grey (not active). So I decided to uninstall Firefox and reinstall it again after having downloaded the 6.0 version. Over the Ff-logo is a 'forbidden'-symbol and when I try to launch it, I get the above message (not supported by this architecture).
I have Mac OS X 10.5.8 on my iMacOS X 10.5.* requires an Intel chip, if you don't have that, then it is not supported, and you would need to go back 3.6.21
For those that really need an earlier version of Firefox, find your system and the Firefox version you want in releases, download and start the install.
* ftp://ftp.mozilla.org/pub/firefox/releases/
:or with the latest of version 3
* http://www.mozilla.com/firefox/all-older.html
: Note Mac OS X 10.4 user, and Mac OS X 10.5 users without Intel cannot upgrade to Firefox 6.
When reinstalling Firefox from a download, Firefox must be down once the installation starts. When the installation finishes, don't let the install start firefox for you. Instead end the install and start Firefox in your normal manner, thus preventing creating a new profile which does not have your bookmarks cookies, etc (but your old profile would still be around and would). -
I just got a notice to update my firefox to 4.0 and when I downloaded the new software it indicated: that I can't open the application "Firefox" because it is not supported on this architecture. Any ideas about what might be wrong and how to fix it?
Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html -
I have a big crossbar mark over my FF4 icon after I've installed and replaced FF3. When I try to open the software, I get "You can't open the application "Firefox" because it is not supported on this architecture." What's up with that?
Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html -
Been using Firefox (many years) version 3.16.. Received invitation to download Firefox version 4 for Mac this morning and did so (regretably losing 3.16 version) because now the new version 4 won't open. I just keep getting the error message "You can't open the application "Firefox.app" because it is not supported by this architecture." I'm using the latest Mac OS 10.5.8. The processor is 1.8 GHz Power PC G5.
I trashed the first download and downloaded a 2nd Firefox version 4 and had the same results.Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com -
My iMac G5 without intel chips, Mac OS X 10.5.8.
using Firefox 364 no problem at all.
But unable to install Firefox 4 on it, prompt "You can't open the application because it is not supported on this architecture"Firefox 4 requires at least OS X 10.5 and an Intel Mac.
There is a third-party version of Firefox 4 that works on PPC Macs, for details see http://www.floodgap.com/software/tenfourfox -
I downloaded the FF4 update and it has the "no smoking" symbol over the FF icon. When you attempt to open the app it states: "you can't open the application "firfox" because it is not supported on this application."
I have OS 10.5.8
If it will not work, how do I get the old version of FF back?Are you sure you downloaded the .dmg file? It should have automounted for you and opened in finder. Then all you have to do is drag the FF4 icon over the Applications link in that finder window and it will install.
I seem to recall seeing the error you noted when I accidentally clicked a windows .exe file on my Mac.
Also, if you visit firefox.com from your Mac, it should be prompting you to download the .dmg anyway. The only way you could get the .exe would be to click the "other operating systems" link below the main download button. -
whever i try to access websites, most of them work but facebook, youtube, my school email, sometimes even google, and alot other websites wont work for me and will tell me i need to update the lastest Flash Player. but when i try to download it, it says 'You can’t open the application “setup.exe” because Microsoft Windows applications are not supported on OS X.' what does that even mean?? This happens on safari, google chrome and i downloaded firefox and it worked for a couple of hours and then stopped working again.
please help, thanks in advance.1. Install Adobe Flash Player from Adobe site.
http://get.adobe.com/flashplayer/
Download it first. Click Safari in the menubar and select “Quit Safari”.
Follow the prompts and install it.
Restart computer. Relaunch Safari.
2. Allow Plug-ins
Safari > Preferences > Security
Internet Plug-ins > "Allow plug-ins"
Enable it. -
UPDATE - Ahhh haaaa! If I log in with the guest account Illustrator works fine! WTF!? Oh well, at least I have a direction to be working towards, thanks for all the suggestions and assistance Adobe Community!
That was sarcasm by the way...
UPDATE - Just installed the latest Illustrator update from Adobe - still not loading. Tried reseting the iMac's PRAM, no luck.
UPDATE - I've just reinstalled the whole CS6 Suite, and the only things that have changed are that I now have a little white no entry sign over Illustrator (it still won't load) and I also have 1.5GB of application updates to do
I don't have any direct evidence but I'm guessing this is a Mavericks incompatibility judging by the other issues people are having with Illustrator. Any suggestions are welcome!
I've been using CS6 on my iMac for the past year (3.2GHz Intel Core i5, 32GB ram). Everything running fine, no problems.
Then I get the popup from Apple saying to upgrade to Mavericks, so I did. After updating my Java version, for the next two weeks everything carried on running fine. Until just now.
I finished working on an Illustrator file, saved it and then exited, only to remember I needed to make one more small change. So I clicked on the AI icon and got this error message;
'You can’t open the application “Adobe Illustrator CS6.app” because it is not supported on this type of Mac.' Eh???
I tried doing a reboot thinking that maybe something had just gone wonkey and needed resetting. Still no luck. So I reinstalled Java again. Nope. Then I tried every other CS6 app and they all ran fine.
Does anyone know what could cause Illustrator CS6 to be working fine for weeks and then suddenly become an unsupported app? These things always happen with you're right up against a deadline! I NEED ILLUSTRATOR WORKING NOW! HEEEEEELLLLLLLPPPP!
JamesI had the same issue and resolved it
I first remove the prefs folder and the plist files for illustrator in ~/Libary
next I logged off,
then I uninstalled illustrator using the adobe uninstaller(http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html)
Next I reinstall illstrator
after that it worked for me. -
I have a Mac PowerPC G5 and i just installed the Version 10.5.4 to be able to install Virtual DjLE , and after I installed it, i try to open it and there was an error msg saying : " you can't open the application virtual dj le because it is not supported on this architecture"
What can I do to resolve this? ... Can someone help me with this?? ..
Thank you for your help!Hi, we're out of luck...
MAC SYSTEM REQUIREMENTS
MINIMUM system requirements:
Intel® processor
Mac OS X v10.5.x
1024x768 resolution
CoreAudio compatible soundcard
1024MB RAM
50MB free on the hard drive
RECOMENDED system requirements:
Intel® processor
Mac OS X v10.6.x
1440x900 resolution
Multi-channel CoreAudio compatible soundcard
2048MB (2Gb) RAM
200MB free on the hard drive
Additional requirements for Video mixing:
ATI™ or NVIDIA® video chipset w/256MB of Dedicated DDR3 RAM
Video must support dual-screen output
Supported Operating System and Processor Platforms:
MINIMUM: Mac OS X v10.5 Leapord on Intel processor platform
RECOMMENDED: Mac OS X v10.6.x Snow Leapord on Intel processor platform
Apple® Mac OS X 10.4.x Tiger or older are not supported
Motorola® (PowerBook® G4) processor platform or older are not supported
http://www.virtualdj.com/products/virtualdj/index.html
Might see if the still have version 6.x here...
http://www.virtualdj.com/download/updates.html -
I just downloaded the new Mavericks operating sytem on my mid 2010 MacBook Pro, 17" 2.53GHz, Intel Core I5 machine. My IPhoto is no longer working at all, I'm getting an error message that says - "You Can't open the application "IPhoto" because it is not supported on this type of Mac". I also loaded Mavericks onto my other MacBook Pro 17", mid 2009 model and everything works fine. I would think that the newer Mac would easily work with IPhoto. Also, when I try to download from the App Store, it asks for my Apple ID and Password, I enter it, and then the little spinning color wheel just spins forever, with nothing ever happening. I tried downloading the IPhoto Upgrade but it never actually downloads, HELP!!!
What version of iPhoto do you have installed? Is if one of the versions shown as not compatible in this screenshot?
If it is then go to the App Store and download iPhoto 9.5. It will be free if you have an iPhoto 9 or later verson currently.
OT -
A day or two ago I went through installing Adobe InDesign CS4 on Leopard OS X.5.8. After what appears to be a successful installati
on, in launching InDesign CS4 the message " You can't open the application "Adobe InDesign CS4" because it is not supported on this
architecture" comes up". Calling in to support and speaking with the agent who read through previous posts, suggested to me that I
should try the same fix that has been suggested when I ran across an error when installing Adobe InDesign CS4 on another separate ha
rd drive externally connected to this computer running Snow Leopard OS X.6.1 for the error reading: "Damaged &/or incomplete install
ation" when launching afterwards. The support technician told me to first delete with the uninstall Adobe InDesign CS4, InDesign.
Following this I am told to run the CS4 Cleanup Utility. I restart the computer each and every time after running each of the utili
ties. Now I am told to install InDesign as a trial version from the DVD and after installation to go ahead & enter the serial numbe
r. When launching InDesign CS4 after installation got back the same error as before: "You can't open the application "Adobe InDesig
n CS4" because it is not supported on this architecture" comes up". Followed KB404711 article and no success. What else can be don
e to fix this issue?
This morning contacted Adobe Support regarding this response:
After having a detailed reserach on your issue i acme to the conclusion
that the problem you are having is not related to Adobe software but its
in fact related to your MAC version ( OSX-5.8). While reseraching your
issue i came across
to many forums where a lot of postings were about the similar error but
with different products the only comon thing was all the Errors were
with Mac machine , also when you check the system requirements for
Adobe Indesign Cs4
by going to the following link
http://www.adobe.com/products/indesign/systemreqs/?promoid=DRHXE you
will find the Mac OS version supported are from Mac OS X
v10.4.11–10.5.4. but we do support Snow Leoprad , so i would like
to advise to you to either contact your system manufacturer or upgrade
to Snow Leopard ( mac os x 10.6)
I have been told that my case is being sent to Level 2 agents and that it can take 24-48 hours for a response. In the meantime I decided to see what the Support Forums can do for me. Until then I am down. Thanks for the help.In the application folder there is a folder 'Adobe InDesign CS4' within which there is just the application file. I would expect there should be more file there??
I've un-installed and installed again - still the same.
Even downloaded the dmg again and done thwe whole thing over again. -
when i try to open the iPhoto app, i getting a message "you can't open the application because it is not supported on this type of mac"
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2. Download it from the App Store to reinstall It's on your Purchases List* there.
For older versions that have been installed from Disk you'll need these additional steps:
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
*Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always. -
I migrated all files from OS 10.7 to OS 10.8 through time machine. However, I always see error packages like the following if I want to run some .pkg files.
You can't open the application "..." because it is not supported on this type of Mac.
But when I switch to a different account, then the .pkg files can be run. Therefore, I think that there might be something wrong with my account configuration files. But I don't know which one. Does anybody which one might cause the problem and how to fix it? Thanks!softwater wrote:
And both are on the same startup disk, right? Because, to be honest, it's hard to figure out how you could have this problem with both accounts on the same startup disk, so I just want to check that before we get too involved.
Assuming that's the case, the first thing I'd do is remove all those except Dropbox from the list, then restart the mac and test for the problem. If that doesn't solve it, run this free analytical tool and post the results back here so we can see if anything stands out:
http://www.etresoft.com/etrecheck
I have removed these login items. But I can not restart my mac now and I will have to restart it later.
Here is the output of etrecheck. Would you please take a look if there is anything wrong?
Hardware Information:
MacBook Pro - model: MacBookPro9,1
1 2.6 GHz Intel Core i7 CPU: 4 cores
16 GB RAM
Startup Items:
CUDA - Path: /System/Library/StartupItems/CUDA
System Software:
OS X 10.8.2 (12C3006) - Uptime: 3 days 2:52
Disk Information:
APPLE HDD HTS727575A9E362 disk0 : (750.16 GB)
disk0s1 (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 749.3 GB (311.8 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-8A8
USB Information:
Apple Inc. FaceTime HD Camera (Built-in)
Apple, Inc. Keyboard Hub
Logitech USB-PS/2 Optical Mouse
Apple, Inc Apple Keyboard
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
FireWire Information:
Kernel Extensions:
com.eltima.ElmediaPlayer.kext Version: 1.0
com.bresink.driver.BRESINKx86Monitoring Version: 8.0
com.nvidia.CUDA Version: 1.1.0
Problem System Launch Daemons:
[failed] com.apple.emond.aslmanager.plist
[failed] com.apple.xprotectupdater.plist
Problem System Launch Agents:
[failed] com.apple.afpstat.plist
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[loaded] com.cisco.anyconnect.vpnagentd.plist
[loaded] com.eltima.ElmediaPlayer.daemon.plist
[loaded] com.google.keystone.daemon.plist
[loaded] com.timesoftware.timemachineeditor.backupd-auto.plist
[loaded] io.redis.server.plist
[loaded] org.macosforge.xquartz.privileged_startx.plist
Launch Agents:
[loaded] com.adobe.CS4ServiceManager.plist
[loaded] com.cisco.anyconnect.gui.plist
[loaded] com.google.keystone.agent.plist
[loaded] com.Logitech.Control Center.Daemon.plist
[loaded] com.nvidia.CUDASoftwareUpdate.plist
[loaded] org.macosforge.xquartz.startx.plist
User Launch Agents:
[loaded] com.adobe.ARM.930da3ce175de4e82bd3cdf1dd8571f74bd3b6a7236bc94bfc00f6e9.plist
[loaded] com.akamai.single-user-client.plist
[failed] [email protected]
[loaded] org.apache.couchdb.plist
User Login Items:
Citations
Dropbox
Xmarks for Safari
VNC Viewer
3rd Party Preference Panes:
Akamai NetSession Preferences
CUDA Preferences
DivX
Flash Player
FunctionFlip
Logitech Control Center
NuFile
SwitchResX
TeXDistPrefPane
Xmarks for Safari
Internet Plug-ins:
AdobePDFViewer.plugin
DivXBrowserPlugin.plugin
Flash Player.plugin
FlashPlayer-10.6.plugin
Google Earth Web Plug-in.plugin
googletalkbrowserplugin.plugin
iPhotoPhotocast.plugin
JavaAppletPlugin.plugin
NPDjVu.plugin
PrintDialogExt.plugin
npgtpo3dautoplugin.plugin
OfficeLiveBrowserPlugin.plugin
QuickTime Plugin.plugin
RealPlayer Plugin.plugin
Silverlight.plugin
User Internet Plug-ins:
Bad Fonts:
None
Top Processes:
11.1 % WindowServer
1.4 % EtreCheck
0.3 % vncviewer
0.1 % beam.smp
0.1 % ps
0.1 % JavaApplicationStub
0.0 % Cisco
0.0 % CoreServicesUIAgent
0.0 % Dictionary
0.0 % AdobeAcrobat
Maybe you are looking for
-
Problem with starting Crystal Report document from SAP Gui
Dear all, in Crystal Reports I created my first report (based on a BW query), which is executed successfully, when I run it directly from CR or from Infoview. The report is stored directly in BW and has been published successfulyl to BOE. If I try to
-
Unable to calibrate X201t pen under Windows 8
I am unable to calibrate the pen of my X201t any longer. The first time I click the "Calibrate" button in Tablet PC Settings the white screen with the crosshair markers in the four screen corners appears but it always disappears by itself within seco
-
How do i correct the error in my code below. Also, i want to add 1 things to my output, before it preforms the insertion sort, so i can show the person who is seeing the output that these r the numbers before the sort, & these r after: 1) Original Va
-
I can not stop the adobe asking for update.. each 5 minutes....
-
Hi I know I should find this in the JMFUtil source code, but I've effectively gotten lost. I'm sending out WAV files as RTP streams to Cisco IP Phones (which works just fine). I have added a ControllerListener to my processor, which catches the EndOf