Can not open on Activative ID

owner refuse to give me heir password but I have there email address

Howdy Beary Judith,
It sounds like you purchased this iPad from another individual, and at setup you are being prompted for the Apple ID password, and the owner is not willing to give their password to do so. I can understand that security is paramount, however there are steps they can perform without having the device to remove it from the Find my iPhone Activation lock. Here is the info for that from the following article:
Find My iPhone Activation Lock: Removing a device from a previous owner?s account
Contact the previous owner and ask them to follow these steps to remove the device from their account:
Sign in to their iCloud account at www.icloud.com/find.
Click All Devices to open a list of devices linked to their account, then select the device to be removed. It should show a gray dot or the word “Offline” next to the device name.
Click "Remove from Account" to remove the device from their account.
After the device is removed from the previous owner’s account, turn the device off by pressing and holding the Sleep/Wake button located on the top-right side of the device. Then restart your device and proceed with device setup as you would normally. 
Thank you for using Apple Support Communities.
All the very best,
Sterling

Similar Messages

  • I have problem with my ipad when set up ipad asked to activation but i cant remember my apple id that i used to setup.now i can not open it .Is there any way to fix this problem?

    I have problem with my ipad when set up ipad asked to activation but i cant remember my apple id that i used to setup.now i can not open it .Is there any way to fix this problem?

    Hello Abdo_Zain,
    I would be concerned too if I was not able to gain access to my iPad.  If you are unsure what your Apple ID is, you can find the steps in this article:
    Apple ID: How to find your Apple ID
    http://support.apple.com/kb/HT5625
    You can reset a forgotten Apple ID password by going to the following link:
    Apple - iForgot
    https://iforgot.apple.com
    Also, you may be able to skip the step of entering your Apple ID if you are setting up the iPad for the first time.
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I do not remember what name and password and it uses the device used and I can not open it is at activation

    I do not remember what name and password and it uses the device used and I can not open it is at activation

    Hey there Haimnus!
    I have two articles that I believe will help you resolve this issue:
    iCloud: Find My iPhone Activation Lock in iOS 7
    http://support.apple.com/kb/ht5818
    Find My iPhone Activation Lock: Removing a device from a previous owner’s account
    http://support.apple.com/kb/ts4515
    Take care, and thanks for visiting the Apple Support Communities.
    Cheers,
    Braden

  • I've just bought an ebook but I can not open it because ADE says "Error! Check Activation".

    Hi,
    I need an urgent support. I've just bought an ebook (from FGV Editor) but I can not open it because a message box says "Error! Check Activation."
    I follow all tutorial recommends about deactivate Windows Firewall for ADE program.. I deactivate the whole Windows firewall but I still have the same problem.
    Please, whenever ADE support can help me. I still believe Adore Corp. reputation.
    Cheers,
    Fabio.

    Thanks! This worked for me. When you uninstall 4.0 and install 3.0 you will have to deauthorize and then reauthorize your account and reader (CTRL+SHIFT+D) and it should work. This saved me a lot of anguish.
    You can find the old versions here: Adobe Digital Editions downloads

  • CAN NOT OPEN  CANON EOS20D  RAW FILE IN PHOTOSHOP CS2

    I had Photoshop CS2 installed on my PC some years ago and could open my raw files from my canon eos 20d. I changed the hard drives in my pc to solid state drives and had to reinstall photoshop cs2. I could not activate photoshop as it was too old a version so I had to download from adobe website with their activation code. Now, I can not open any of my canon eos 20d files. I have taken some now photos just a few days ago and the problem still arises. I get the message that it does not recognise this type of file. Any ideas?

    You downloaded, extracted (unzipped) the Camera_Raw_3_7.zip and copied/moved the Camera Raw.8bi to
    C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\CS2 (windows 64 bit system)
    or
    C:\Program Files\Common Files\Adobe\Plug-Ins\CS2 (windows 32 bit system)
    Camera Raw 3.7 update for photoshop cs2 Windows
    Adobe - Photoshop : For Windows : Camera Raw 3.7 update
    other cs2 updates
    Adobe - Photoshop : For Windows
    Adobe - Bridge : For Windows
    Adobe - Creative Suite : For Windows

  • I Have an email the recently went invalid and I can not open my apple settings. When I put in my password it keeps saying invalid id because the email is invalid. How do I reset to a new email or merge accts to another email without deleting all items i

    Need help merging or resetting apple id
    I have a email that recently was closed out and can not open
    This email was my apple id

    You will wait for the rest of your life. You need to fix it; no one else will. To turn off "Find my iPhone" and its associated Activation Lock you need the Apple ID and password that were used to turn it on. If you know the Apple ID you can contact Apple Account Security and have them reset the password (after you prove you are the rightful owner of that Apple ID). see: http://support.apple.com/kb/HT5699.
    If you don't know the Apple ID the phone is permanently unusable.

  • I can not open the messages from the inbox of Vodafone webmail

    I have loaded Firefox on my new Nexus 7 android.
    I prefer firefox , rather that google crome.
    When I try to access mail in my vodafone webmail account I can log on and get to the mail page.
    When I click on inbox it shows all the in coming messages but I can not open them.

    Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
    The Firefox cache temporarily stores images, scripts, and other parts of websites while you are browsing. <br>
    Note: ''This will temporarily log you out of all sites you're logged in to.''
    To clear cache and cookies, do the following:
    #Tap the menu icon located at the top right corner. This is the icon with 3 bars. On older Android devices you'll have to press the hardware menu key and then tap More.
    #Tap '''Settings'''.
    #After that, you will be taken to the settings screen. In the settings screen, look under the section '''''Privacy & Security''''' and select '''Clear private data'''.
    #You will then be taken to a list of what can be cleared. Select the following 2 for deletion:
    #*Cookies & active logins
    #*Cache
    #After those have been selected, tap the '''Clear data''' button to actually clear the cache and cookies.
    Did this help you with your problems? Please let us know!

  • CAN NOT OPEN EOS20D  FILE

    HAVE PHOTSHOP CS2. IN PAST NO PROBLEM OPENING CANON EOS20D FILE. PROBLEM WITH PC AND HAD TO REINSTAL VIA ADOBE WEBSITE. NOW CAN NOT OPEN FILE. DOES NOT RECOGNIZE

    Bit of back ground.
    Originally had Windows Vista 64 bit and installed Potoshop CS2 from CD.
    This worked fine. I then upgraded my PC and changed the hard drives to
    solid state drives and Windows 7 (64 bit) and Potoshop CS2 from CD.  This
    worked fine. My PC was infected with a virus so bad that I had to scrub the
    whole PC and re-install every programme, one of which was Potoshop CS2. At
    this point I could not activate Potoshop CS2 as the activation server was
    shut down. I therefore had to download from the Adobe website. This is when
    the problems seem to start.
    Not only can I not view the CR2 files taken with my Canon EOS 20D but I can
    not view JPEG nor TIFF files that I have also saved to hard drive. The odd
    thing is though, I can view photos taken by my iphone 4S.
    The Camera Raw plug in is 3.0 but I have added as you have suggested the
    3.7 version and I still get the same result.

  • Can not open in safe mode

    I can not open in safe mode.  It launches Utilities instead.
    I tried to reinstall Mavericks but it stalled for over an hour.
    I found a loose kernel in my HD fielder and deleted it.
    Anny ideas?  Thanks.
    Allan

    Using Safe Mode. What happens with a normal boot - same thing? If so then your startup volume needs to be reformatted and you need to reinstall OS X.
    Install or Reinstall OS X from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
      1. Select Disk Utility from the main menu and click on the Continue button.
      2. After DU loads select your startup volume (usually Macintosh HD) from the
          left side list. Click on the Erase tab in the DU main window.
      3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
          the Security button and set the Zero Data option to one-pass. Click on
          the Erase button and wait until the process has completed.
      4. Quit DU and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Install button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
               because it is three times faster than wireless.
    This should install the version of OS X that you had installed.

  • InDesign CS5 (Mac OS 10.6) can not open its own file

    I need guidance to open an artwork file that in one hour I have to send to the print shop. InDesign refuses to open its own file.
    Any clue? Adobe, please help.

    Re: InDesign CS5 (Mac OS 10.6) can not open its own file
    Bob and Peter
    Thank your for helping us out. It was really necessary to ask a coworker to open the file and export it in InDesign markup language.
    Three hours later than expected, but it's done!
    We are stuck here. I'm a Master Collection user of CS5, using only Dreamweaver, Illustrator, Photoshop, InDesign, Bridge and Acrobat Pro. (I don't know why I bought the Master's). My coleague former Window user, got a Mac in May and downloaded the trial version of Design Studio Standard Collection of CS5.5. Before expiring, we purchased its license and filled it in the active trial version.
    A couple of months ago we noticed that were missed Plug Ins on his version and contacted Adobe who instructed us to download the whole files again. We never did because it is a pain to get rid of the missing parts of a pre installed trial version etc.
    I will ask Adobe to send a CD disk for his version.
    Regards,
    Junia

  • I am getting Safari can not open page. Server stopped responding.  I have tried several things with no luck.  Anyone know what to try?

    I am getting message Safari can not open page.  Server stopped responding.  I have tried several suggestions but they have not worked.

    This is on an iPad, correct? Are you sure you have a network connection? Is your iPad Wifi or Wifi & 3G? I know these might seem like dumb questions, but we've got to narrow it down to get a solution. If you're absolutely positive you have an active network connection we can move on to other things.

  • I upgraded from mountain lion to the OS X Mavericks and my EndNote X5 can not open.I re-installed but cannot open. I keep on getting the message "Unable to load EndNote X5: Applications/EndNote X5/EndNote X5.app/Contents/Encore.bundle" can anyone help?

    I upgraded from mountain lion to the OS X Mavericks and my EndNote X5 can not open.I re-installed it but cannot open. I keep on getting the message "Unable to load EndNote X5: Applications/EndNote X5/EndNote X5.app/Contents/Encore.bundle" can anyone help?

    Please take each of the following steps that you haven't already tried. Test after each one. Back up all data before making any changes.
    1. Make sure that the right volume is selected in the Startup Disk preference pane.
    2. Disconnect all wired peripherals except those needed to start up. If there's no change, reconnect them
    3. Reset the System Management Controller.
    4. Reset the PRAM.
    5. Start up in safe mode, then restart as usual. If you can't start in safe mode—for instance, if FileVault is active—then triple-click anywhere in the line below on this page to select it:
    /var/folders
    Right-click or control-click the highlighted line and select
              Services ▹ Reveal
    from the contextual menu. A Finder window should open with an item named "folders" selected. Move the selected item to the Trash. You'll be prompted for your administrator password. Restart and empty the Trash.

  • Can not open app store on macbook pro/imac after installing Mavericks

    I have just installed Mavericks on both a Macbook Pro and an iMac. I use the same Appleid on both.
    But now I can not open App Store
    I have tried clicking on the App Store symbol in the dock, starting it from the program folder in a Finder window, and starting it from the Apple menu. The result is the same: Nothing happens except that the menubar that was active before the attempt becomes inactive (dark). There is no App Store Window, and no App Store menubar.
    I have one idea why this happens. I removed the "OS X Mavericks" from the list of downloads/purchases in App Store by misstake before I installed Mavericks. If that is the problem how can I solve it?

    Ok, now it works again. I got a Notice that I could update some applications and I answered that I wanted to do that. Then, when I tried to start App Store the menubar showed up but no window. I choosed "Windows - Minimize", exited App Stored and started it again. And now it works - on both computers!

  • I use to have a cc membership which I discontinued and I reinstalled cs6 and now I can not open cs6 without the renew subscription window poping up. How can I still use cs6?

    I use to have a cc membership which I discontinued and I reinstalled cs6 and now I can not open cs6 without the renew subscription window poping up. How can I still use cs6?

    Sign in, activation, or connection errors | CS5.5 and later
    Mylenium

  • I can not open my i phone  it lock

    I can not open my iphone s4  help

    http://support.apple.com/kb/PH13695
    Contact whoever you got it from. If they can't or won't remove the lock, get your money back. If they won't do that, or you can't contact them, turn it over to the police. It's probably stolen.
    There is no way to bypass the activation lock.

Maybe you are looking for

  • SSRS expression returns #error value in some cells

    Hello, What do you think below expression sometimes return #error value in ssrs. =SUM(Fields!X.Value / 100 * DateDiff(DateInterval.Day,Fields!s_date.Value,Fields!e_date.Value)) / IIF( SUM(DateDiff(DateInterval.Day,Fields!s_date.Value,Fields!e_date.Va

  • Cannot add files to iPod

    Hi, I have an 80GB iPod Classic. I use Windows 7 and Windows XP. When I try adding media to it through iTunes, it freezes, and I have to disconnect my iPod to make my PC work again. When I disconnect, it says "The iPod 'Shivangi's iPod' cannot be syn

  • Fiscal year change not yet made for company 1234

    While executing the T-code S_ALR_87011963 (Asset balances report) reporting year : 31.12.2009, am getting the below error u201CFiscal year change not yet made for company code 1234u201D 1)      In T-code OAAQ, For company code 1234 closed fiscal year

  • Problems with abstract classes

    I'm reading Java Wireless Blueprints and i'm confused with the functionality of abstract classes, especially in the next section: public byte[] getPoster() throws ApplicationException { if (poster == null) { try { poster = ModelObjectLoader.getInstan

  • 3D Doesn't work after changing the LCD Screen

    Hi, I had a problem with my Toshiba Qosmio F755-3D350 the LCD screen broke and I have to replace it with a new screen. The new screen is the same model : B156HB01 V.0 from Au electronics, that the original screen on my laptop had. everything works fi