Can not open RAW from bridge
I have cs6 when I am in bridge I get this every time I try to open a file in RAW
I have uninstall cs4 and cs5.
Can use mini bridge.
windows 7
If you uninstalled CS4 that it it not there to open program as the message says
You should open edit/preferences/file type associations and change the defaults to CS6..
Similar Messages
-
Can not open RAW-Files from Nikon D4 in Photoshop cc
hi. i can not open RAW-Files from Nikon D4 in Photoshop cc. (Camera RAW 6.7) can you help please?
ACR 6.7 would be for an older product, PS-CS5 or PSE10 or PRE10.
What does Help / About Plug-ins… / Camera Raw… show in PS-CC for a version for ACR and is there more than one version of ACR in the Help / About Plug-in list. Help / About Plug-in is what I’d do on Windows; I’m not sure if the menu path is the same on a Mac or not. -
I can not open raw image files from my Cannon 5d mark iii with cs6 and my cs6 in mac
I can not open raw image files from my Cannon 5d mark iii with cs6 and my cs6 in mac
The Mk III requires an updated version of Camera RAw, so run Help --> Updates and install it.
Mylenium -
Can't open files from Bridge in CS6
All was good with CS6 until today - it will not open files from Bridge. Jpg and RAW, neither will open, it's driving me bananas! Any suggestions?
Edit: Problem solved. I had overlooked an old version of PS 7.0 was still in my program files and CS6 Bridge had picked it up as default editor. Deleted PS 7.0 and everything is back to normal. Phew!Lots of questions here, will see what I can add.
For the file problem go to preferences/file type associations. You should have the option selected CS6 for the extenstion as the default. Might try the radio button on the bottom first to set them to default settings.
If the 1.77g file you are refering to is the one you downloaded and used for installation you can delete it. It is a wise choice to save it to a DVD first so in case you need it in the future you will have it. Also save the serial number in safe place. Acutally safe is not the right word, need to save in place where you can find it if you need it next year. HD can fail.
There are still thrid party plug-ins that do not work in 64 bit mode, hence the 32 bit version. Also there is no 64 bit TWAIN so some still like to use that for scanning.
Some users experience file association and other problems with an uninstall of past versions. So it is safest to leave them be.
If you want to clean up a little resist the urge to move any Adobe programs once is is installed. Can really foul it up. -
I can not open raw files in elements 12 any help please?
I can not open raw files from my Nikon D610 in elements 12. (I have already downloaded raw converter 8.3 but to no avail) any help please would be appreciated.
Hi,
Can you confirm which Camera Raw PSE 12 is actually using by loading the editor and going to Help -> About Plug-in -> Camera Raw.
If you do Help -> Updates it may install the latest camera raw of 8.4 - not on XP or Vista systems.
Do you use any Nikon software to download the images? The older versions have been known to corrupt the files.
See the following for more info.
http://owl.phy.queensu.ca/~phil/exiftool/fix_corrupted_nef.html
Brian -
I can not open raw files in cs6 extended ,my camera is Nikon D 800E.
I can not open raw files in cs6 extended ,my camera is Nikon D 800E.
Hope some one can help me.
Robert chenThe D800E is definitely supported in Camera Raw 7.1 which is compatible with CS6.
Which version of Camera Raw are you running?
Win: Help > About Plug-In > Camera Raw
Mac: Photoshop > About Plug-In > Camera Raw
If you're already on 7.1, what exactly happens when you try to open Raw files from that camera? -
I bought a Sony alpha 77II and can not open RAW in adobe photoshop elements 12.
I bought a Sony alpha 77II and can not open RAW in adobe photoshop elements 12. Image data converter is not ok because of to much pre defined colour management, suggestions ?
[discussion moved to Photoshop Elements forum]
-
I recently purchased a Nikon D7200 and I can not open RAW files. I get error messages indicating camera isn't supported. I've downloaded RAW 9.0 but no luck. I'm running PSElements 12. Any suggestions? Is the camera too new for Adobe?
Please post Photoshop Elements related queries over at
http://forums.adobe.com/community/photoshop_elements
As per
Camera Raw plug-in | Supported cameras
D7200 needs ACR 9 and according to
Camera Raw-compatible Adobe applications
PSE12 supports only up to 8.5 -
Can't open RAW from new Canon S110.
Can't open RAWfiles from my new Canon S110. Using PS5 12.0.4 on iMac. I get this message, "Could not complete your request because the file appears to be from a camera model which is not supported by the installed versions of Camera Raw..." I try to open Camera Raw help, but it does not respond.
Thanks in advance,
BrianThe Canon S110 is supported by Camera Raw 7.3 or later
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
Camera Raw 7+ is only compatible with Photoshop CS6 and later. Won't work in CS5.
http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
Your choices:
Upgrade to Photoshop CS6
Join the Adobe Cloud and pay the monthly fee
Convert the Raw S110 files to DNG using the free DNG converter then edit the DNGs in CS5
http://www.adobe.com/products/photoshop/extend.displayTab2.html
http://www.adobe.com/support/downloads/product.jsp?platform=Macintosh&product=106 -
Can not open Web from Nokia N81
Hi
My Nokia N81 worked fine until today
I just connected it to PC Suite and made a synchronization - now I have folowing problem - I can not open web-browser any more.
When I go into menu and then try to open Icon web - screens becames blue (desctopimage) for a second and then I'm landing again in menu just as it was before click on icon
What can be the reason of this problem?
Similar happened also with N-Gage Icon. I've tried it with memory card and without it - the result is the same - I can not go into web-section of my NokiaHi,
It seems that some faults has occurred during
the synchronization. You should re-set your
internet settings. If the issue persists your
phone will need reformat.
Regards.
Fattan -
Bridge cs4 can not open raw and jpg directly by itself
i never did it! i want to open raw and jpg files by camera raw directly with open photoshop. i have made the choose to open by double click in the preference but still can not do.
my brother's computer can open both of them and we are similar xp system.
and i have checked and reinstalled many times and still failed.A bit of magic (if I'd remember):
1. open PS, from here File > Browse in Bridge
2. open any RAW/DNG - it goes to PS
3. switch to Bridge window (PS still open)
4. R-click, select "open in Camera RAW"
5. Close all
Now opening in Bridge should work :)
Chris -
Photoshop CS4 Extended will not open file from Bridge.
This is 2nd time this has occurred. Last time I uninstalled CS4 and re-installed to fix it. Prefer to not do that again.
System: XP Media center, SP3, 3 GB memory, Athlon 64x2. Generic - motherboard graphic card. 18 GB disk space remaining.
Typical work flow is edit DNG files in Lightroom. Once done, select DNG files in Bridge and under Tools run the Photoshop Image Processor which changes color profiles, sharpens and converts to JPEG and saves. Done this probably a thoudand times. Ran a batch Sunday afternoon fine.
I may have interrupted an Image Processor batch that was just starting and glitched something.
Now Bridge will open Photoshop but nothing gets imported with the Image Processor. Also Bridge will not run a Batch. Bridge will open Adobe Raw for editing a DNG but cannot load it into Photoshop.
Once I try any of these things, Photoshop will usually not close/exit and many menu items are shaded out. For example, opening a file or starting a new file is not available. Activate/Deactivate not accessible. Can Deactivate and Activate through InDesign. Photoshop seems OK otherwise if re-started after re-boot.
Any ideas?
Thank you.So far, no good. Here is what I have done and current symptoms.
1) I backed up all the settings and workspace files, then deleted them. No change.
2) No matter what I do, everytime I hold down the control, alt and delete keys when starting PS CS4 all I get is the Windows start settings "Adobe Photoshop CS4 Properties" box where you can select "Target" and "Start In" paths. I do not get any dialog or confirmation to reset anything.
3) Bridge successfully reset preferences using the Control key while starting it up.
Everything about Bridge has appeared to function corectly before and after these changes. But when the Tools/Image Processor or Batch is called, it starts Photoshop OK but nothing in imported to be processed.
Photoshop opens (either from import or stand alone start) with menus partially functioning. Under the file tab, nothign important works. Cannot open a file, cannnot start a file, cannot exit - all grayed out. But keyboard shortcuts do work and I can open a file or start a new file using the shortcuts. Once I get a file open with the keyboard shortcut, most of the menu functions come back under the file tab and can be used and can exit PS. The "X" in the upper right corner to close the program still remains greyed out and not functional. The Activate/Deactivate options under Help remain grayed out.
4) I deactivated the Suite from within InDesign and the I uninstalled only PS using the Windows uninstall utility. I reinstalled PS from the CS4 Suite which of course reinstalled Bridge and some other utilities. I reactivated from within InDesign and ran all updates from within InDesign since updates were still grayed out in PS. Encountered an error (Adobe CSI CS4 1.0.1,Adobe Drive CS4 1.0.1,Adobe Extension Manager CS4 2.1:Failed to install.)
Problems still exist as described.
5) Finally I deactivated again from within InDesign and re-installed the whole CS4 Suite without uninstalling anything before hand. I noticed that process did an uninstall before each module was re-installed.
Problems still exist as described above. I did notice that Photoshop showed itself still Activated (but grayed out) in the help menu even though I had previously deactivated the suite before the re-install. Ran complete Updates from within Bridge. Encountered an error (Adobe CSI CS4 1.0.1,Adobe Drive CS4 1.0.1,Adobe Extension Manager CS4 2.1:Failed to install.) but continued on. Everything else updated OK.
I looked through the registry settings for the settings path as noted in referenced forum links and all looked correct.
Additional Notes: I installed the OnOne Plugin Suite 4 a few weeks ago. Everything has run smothly since then until this problem poped up. After the Uninstall/reinstall the OnOne menu option appears as normal. As do my old Nik plug ins. I doubt this has anything to do with the issue.
Any more ideas outside of starting all over on a clean drive/machine which I really dread even contemplating?
Thank you. -
Can't open file from Bridge CS6 in PS CS6
From Bridge CS6, my files open in Windows Photo Viewer or Live Photo Gallery. When I go to "Open with" on the File menu PS CS6 is not an option. I know this has to be simple but it is driving me nuts and I can't get my photos to open in PS when I double click on one of my tens of thousands of photos.
I just bought CS6 yesterday. Also, do I need to keep the Adobe CS6 file that is on my desktop, or can I delete it now that the program is loaded? It is 1.77 GB. If I even need to reload PS, I can do it from the store on my account, right? Same for the Adobe file that is on my desktop from the LR4 download a couple of months ago. Also, I left PS6 checked on the download for 64 and the regular PS. I have windows 7 so I only need 64 bit. Why is the other PS CS6 (non 64) there? Do I need it? Should I uninstall it? Also, should I uninstall CS4 and CS5? They are all still sitting there, along with LR3 (I use LR4 now). I have huge and multiple hard-drives, so space is not a consideration. But I just want to clean up a little.Lots of questions here, will see what I can add.
For the file problem go to preferences/file type associations. You should have the option selected CS6 for the extenstion as the default. Might try the radio button on the bottom first to set them to default settings.
If the 1.77g file you are refering to is the one you downloaded and used for installation you can delete it. It is a wise choice to save it to a DVD first so in case you need it in the future you will have it. Also save the serial number in safe place. Acutally safe is not the right word, need to save in place where you can find it if you need it next year. HD can fail.
There are still thrid party plug-ins that do not work in 64 bit mode, hence the 32 bit version. Also there is no 64 bit TWAIN so some still like to use that for scanning.
Some users experience file association and other problems with an uninstall of past versions. So it is safest to leave them be.
If you want to clean up a little resist the urge to move any Adobe programs once is is installed. Can really foul it up. -
Hi
I cannot open my raw files in CS5. I have a canon 40d and I am on a computer that runs Windows XP. I have no problems with my CS3 wich also runs on my PC. Can any one help?Trying to use DNG is the wrong approach. Photoshop Camera Raw should be able to open your 40D raw files directly. Having to go through two conversions would be a huge monkey wrench in the works.
Some questions:
Do you have anything programmed for your Additional Plug-Ins Folder in Edit - Preferences - Plug-Ins?
Can you open a Canon .cr2 raw file in Photoshop CS5 by choosing File - Open As..., selecting Camera Raw (...) from the bottom, then choosing your file and pressing [Open]?
Is there anything special about your camera? Has the firmware been modified?
-Noel -
How can I open RAWs from Sony RX100II in PSE 11
I have PSE 11 (Editor only) on iMac. How to open RAW files from Sony RX 100 II?
You need to upgrade to PSE12 to get support for your camera. Alternatively, download and install the free Adobe DNG converter to convert your raw files to the Adobe universal Raw format and the files will open in all versions of PSE (keep your originals as backups and for use in the camera manufactures software)
Mac download (.dmg file) click here DNG Converter 8.2
You can convert a whole folder of raw images in one click. See this quick video tutorial:
You Tube click here for DNG Converter tutorial
Maybe you are looking for
-
When attempting to share music on Itunes with my IPad I receive a message telling me that my Ipad contents will be eraced if I attempt to sinc with this computer. Under General settings it lists my computer and a bogus computer. If I sinc it will I
-
Sub-Summarizing columns in Cross Tab
Post Author: valkyriexp CA Forum: General Hi, I'm fairly new in using CR, I wonder if anyone could help me. I have a cross tab report of projects in rows, activities in columns and hours in table, i need to insert few new columns that have the sum o
-
IChat AV: Unable to chat after migrating to new computer
Hi all, I used Carbon Copy Cloner to migrate my entire drive to a new computer while my wife uses my Powerbook on a job out of town. Everything seems to be working fine--except that while we can chat with other folks, we cannot chat with each other.
-
Anyone actually use bluetooth with their phone?
So i have recently discovered that the less i deal with my phone directly the better my quality of life should be. I have deleted pretty much all the bs social networking apps from my phone and try my damndst to keep my eyes off of the screen. But th
-
Intel Imac - Dock Issues / Program Start Problem
Ive has my intel based imac for about a year with no issues. I got 1 Virus type of thing a like 8 months ago but that was deleted without issue. I have a problem where I would click a program in the dock and it would not open. Anyone have any idea wh