Can not open Word 2010 docx in Word 2013 from Outlook 2013 mail

Hello,
I got a mail on outlook with a word 2010 attachment in docx format.
Open this attachment with double click will show only the welcome screen with the text Open in protected mode.
With process monitor I could that word 2013 in an endless loop and tries to create the registry key
"HKCU\Software\Microsoft\Office\15.0\Word\Options\Vprsu" in an loop.
The result is always ACCESS DENIED.
When I create this key manually there will be an loop to create the registry key
"HKCU\Software\Policies\Microsoft\office\15.0\word\options\Assist".
The result is always ACCESS DENIED.
When I create this key manually. Word show the attachment immediatelly.
Closing Word and open the attachment again will delete this registry key and the cycle starts again.
Is there a hotfix available that will repair this?
I think this is an error in word 2013 protected view.
Disabling the protected view will help, but is not an good solution.
Is there any other workarround?
Screenshot from process monitor:
Best Regards,
Dieter

This issue may occur if the default file associations for Word are damaged. You may repair Office 2013 to restore the file associations and check if that helps. Refer to the link below for more information. You may restart
the computer once the repair is done.
http://office.microsoft.com/en-us/project-help/repair-or-remove-office-HA010357402.aspx
Note: Close all Office applications before you perform the repair.

Similar Messages

Hi, I got iMac and I can not open file "doc" when I have downloaded from distance learning internet page. I have office program, but when I try to open file it shows: u1-assesment.doc uses a file type that is blocked from opening in this version.?

Hi, I got iMac and I can not open file "doc" when I have downloaded from distance learning internet page. I have office program, but when I try to open file it shows: u1-assesment.doc uses a file type that is blocked from opening in this version.?
I have tryed to change just extension from doc to docx, but it doesn't work. I am new user, please help

Consider the Mcrosoft Office:Mac forums as well:
Office for Mac forums
Here is an MS page that deals with that error message:
http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macword/bs0811doc-use s-a-file-type-that-is-blocked-from/548ce159-8157-419e-9552-1789594fafe9

How can i open a shared calendar in mac calendar from outlook?

My boss uses Outlook and I have everything set up on my Mac with Mail and Calendar. His assistant just sent me a shared calendar invitation and I can't open it. Does anyone know how to make this work?

download microsoft outlook, if you have microsoft office you should have it also. If not try thunderbird from mozilla to open the file

Can not open a web address in word

when I email a document in word 2011 to a group with an hyperlink/ web address. PC users can open it but MAC users cannot why???

BCC: one to yourself on a Mac, look at the Raw Source for clues.

HT4641 Since the ISO update I can not open any x.docx or x.xlsx or zipx

I used to the pages, quick office and textilus for documents. For Xls I have used calc free xls, numbers and quickoffice. For the zip file I have used the izip pro. Now none of the new office format (docx,xlsx) or zipx would open.

Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.

I can not open a file that has been converted from a PDF to a .doc. I have a one year subscription to PDF Pack.

I click on the tool to convert my pdf file to a .doc file. When the program writes it is finished and I can down load the document, I do so. Even though the converted file is listed as a .doc or docx, neither Microsoft Word nor OpenOffice can open it. What is going wrong?
I also click to be able to edit my pdf document, but no commands to edit it come up. Am I doing something wrong?

Hi ktewksbu,
I don't think you're doing anything wrong. What is the file size of the converted document (and the filename extension)? Do you have the same issue with any file that you try to convert? Or is the problem specific to one file?
As for editing a PDF file, that requires Acrobat. (Adobe Reader lets you comment on a PDF, but not alter its content).
Best,
Sara

Protected mode message comes up and when I try to open files it says it encountered an error and to check online.. i can not open any files now

Within the past week I have been getting messages when trying to open pdf files " that its in protected mode and can not open"
I deleted adobe and reinstalled directly from Adobe.com and now I can not open any file with a message it has encountered an error
and will check online for solution. Please assist as no files will open now
This is details of error
Problem Event Name:    APPCRASH
Application Name:    AcroRd32.exe
Application Version:    11.0.10.32
Application Timestamp:    547e9779
Fault Module Name:    StackHash_147f
Fault Module Version:    0.0.0.0
Fault Module Timestamp:    00000000
Exception Code:    c000041d
Exception Offset:    77a011f1
OS Version:    6.1.7601.2.1.0.256.48
Locale ID:    1033
Additional Information 1:    147f
Additional Information 2:    147ff66574b08dc93180d912e60eb897
Additional Information 3:    c48b
Additional Information 4:    c48be403c52ec6c06778481aaa8948d8
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Can you open Adobe Reader by itself? If so, try to disable Protected Mode [Edit | Preferenes | Security (Enhanced)].

Can not open camera raw in PSE 11

I can not open raw camera pictures in PSE 11 from Sony RX100II. I have uppdated ACR via help/updates in the PSE editor. I use Windows 7 home premium as OS.
Will it work if I update to PSE 13?

Yes. Will work with PSE13 but your camera is not compatible with PSE11.
Download the trial and try it free for 30 days.
http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=en

Camileo H30: I can not open .avi using Pinnacle studio 14

Good day,
I can not open .avi in my Pinnacle studio 14 from my Camileo H30
Where is problem and how is resolution?
Camileo H30, PC with Win7.
Thanks.
regards
/MH/

HI,
I have the same problem trying to imports clips from my new Camileo h30 (set in HD720 30FP).
In my case, it's possible to import the clips, but after scene detection, in the film preview window, the film is displayed with big white horizontal lines,
The video is set in HD 720 as soon as the studio project.
It look like an interlace problem?
Thanks in advance for your help!
Denis

Problem to open office files from outlook 2013

can not open the attached office files word, Ex etc. from outlook 2014, as the window of opening file hang on "opening in protected view", and the only way to open the attachment is to save it and open it, kindly advice

They'll help you over here.
http://answers.microsoft.com/en-us/office/forum/office_2013_release-outlook?sort=lastreplydate&dir=desc&tab=Threads&status=&mod=&modAge=&advFil=&postedAfter=&postedBefore=&threadType=All&tm=1426773461429
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

OTM can not open attachment with Word Document(*.docx)

With more and more use of Word Document(*.docx) (version 2007). OTM (Oracle Test Manager) can create an attachment with it, but can not open attachment with Word Document(*.docx). Is this a problem for anyone else? Any wok around?
Thanks
Katherine

I am using OTM version 9.2 and the Word document (*.docx) attachment can be opened in this.
For being able to open a docx file, try to attach an word document from the file option in the Requirements, Test or Issue tabs in OTM , once you upload the file, please check if location is " in Database" Else click update DB and upload the document.
Once the attachment is attached to the Attachment section in the right pane, clicking on the attachment will open the *.docx document.
This has worked for me.
Hope this helps.

Can't Place a specific Word 2010 docx into InDesign CS4

I'm trying to use the Place command to bring the text from a specific Word 2010 docx into InDesign CS4.
I've successfully brought in several Word 2010 documents (docx extention) to InDesign CS4 documents using the place command.
I have one specific 30 page document (which is no loarger than others which have been successful), and when I use the place command with this file, nothing happens (and no text gets loaded onto the cursor for placement.
I've tried re-saving the word doc, even pasted its contents into a new Word doc and still can't get the Place command to work.
THere's nothing particularly unique about the file - doesn't have any odd embedded content, just a 30 page text document writtin in word.
Any ideas what could be going wrong or how to fix it?
I've tried restarting both Word and InDesign without any change (and the rest of my word files can be Placed without problem, so I imagine it's something specific to that file.
NOTE - re-saving in RTF format lets the Place command work but leaves a bunch of empty squares/boxes (not sure if these were for tabs or empty spaces or what really??)
Can work around this for now, but would like to know how to get the place command working with decent size Word Docs( docx for word 2010 if that matters).
Thanks for any help.

It turned out that for at least one particular document the OP had used some blank paragraphs as spacers at the start of the text, and that the style assigned to the second paragraph used a combination of left and right paragraph indents that was more than the width of the document page, sending the entire document (except for the empty first paragraph) into overset. I can't say for sure, but I think the Word styles might have been mapped to ID styles because I found no trace of the indents in the Word file itself, only in the ID document, and I had no trouble placing that Word file in my own ID test document. I did have some trouble placing another .docx file supplied by the OP in CS4, but not in later versions, and conversion to .doc solved that problem.

I downloaded the adobe XI software and it shows in my Adobe download assistant as downloaded but I can not open it and it is not a part of my applications. Very frustrating download process as I just want to convert a PDF file to an editable word document

I downloaded the adobe XI software and it shows in my Adobe download assistant as downloaded but I can not open it and it is not a part of my applications. Very frustrating download process as I just want to convert a PDF file to an editable word document...

Odonnells52 you will still need to install Adobe Acrobat Professional prior to being able to make edits to PDF or utilize Acrobat. By default the installation files have been saved to your download folder.
If you continue to face difficulties with the Adobe Download Assistant then please see Troubleshoot Adobe Download Assistant.
You can also download the installation files directly from Download Acrobat products | Standard, Pro | XI, X if you are unable to locate the downloaded installation files.

Can not open MS word docs

I have an emac running 10.2.8, two users, when i sign in and try to open a word document from the desktop a window opens and says i can not open the document because it's in use by another user. I created this document and the other user has not signed on in months. I then tried all of my word docs and the same message appears. I've shut down the computer, restarted putting in my password but same problem occurs. I repaired permissions but no change. These are my docs and no one else is "signed in" or using them. I cannot copy them or send them via email (which now unexpectedly quits upon opening), Do I need to archive and install?, How much free space on the hard drive do I need to reinstall the OS?
Thanks for any response.
Joe

Many system issues can happen as the hard disk drive's capacity is over-full
with saved content and there is no room left in the hard drive for the OS X
and applications to function. The drive should have more than 10% free of
content in order for the OS X and Applications expected to run in the Mac
to have room. This space is for swap files, virtual memory, and flex space
where the system has to automatically find and use free space for most
everything the computer can do.
{There are specific rules (seen online in helpful articles, some in Support)
on how to transfer iTunes music libraries or make and restore archives
to external hard disk drives and maybe save to DVD if possible; these
and iPhoto libraries eat up essential space on a hard disk drive.}
The drive is over-full and a failure (including damage to the physical drive)
is a matter of time. He should try to archive music on DVD off the Mac
& then free-up that space on the internal hard disk drive so the OS X
and apps can use the free space for their required functions. Moving a
few dozen original items, after saving them off the computer, to Trash
may be helpful, but that would take a lot of time & looking.
An externally enclosed drive, properly formatted for OS X and capable
of booting the computer (firewire 400) is advised; at this point.
My computers have about 50% empty hard disk drives; that free space
allows the OS X's automatic virtual memory allocation to create and use
that space to help the apps and system function properly. When it is not
there, the system tries to overwrite non-essential files or could cause a
kind of corruption to happen on the main hard disk drive...
The documents and other permission issues are a symptom of other stuff.
A computer in a good state of maintained health requires some effort;
and when that is not done routinely, things get slower and as the drive
gets full, stuff can fail. So, to free-up user created files such as music
(including hidden duplicates if they exist) so that space can be reclaimed
and used by the OS X, is a good idea.
To get and use an externally enclosed hard disk drive in a self-powered
unit with AC Adapter, probably a FireWire ported one so the transfer
rate is fast enough to get the job done (USB 1.1 is too slow to boot an
older computer, so FireWire can; a clone of the entire computer could
be created on a formatted FireWire bootable externally enclosed drive
and that could be used as a bootable backup.) Archiving this way is a
way to keep all the files and their status collectively together; then if
something happens to the computer's internal drive, this remains.
To boot the computer from the OS X install disc and see if a disk repair
and a permissions repair can be done in that disc's version of Disk Utility
may be helpful. Not sure if that old of a system will tell you much in this
Disk Utility (on installer disc, but not used to install anything) but you
can Verify the SMART status of a hard disk drive & also try to repair it.
But the drive is over-full if there are only mere MBs of free space. He
should look into the Get Info (File menu in Finder) on the Hard Drive
Icon to see what the total capacity of that drive was, and how little is
remaining; then work on getting rid of non-essential items, so as to
save the system itself from damages. Also, if the computer is getting
older, it may be time to consider a new replacement hard disk drive;
and if so, a larger capacity one could be installed, and the older one
put in an external FireWire enclosure, then the content may be cloned
back into the computer on a partition or direct; so there'd be more
free space that way for the contents. (Or weed out non-essentials, too.)
More information would be needed to proceed, since this situation is
at best sketchy and could be problematic to say the least.
Good luck & happy computing!

Word files on e71 memory but can not open using qu...

Hi
I copied a Word file to my E71 and when connected via USB I can see the file - in 2 places, copied twice.
Problem: can not open in Quick Office, they don't appear in the folders that I see them when connected via Nokia PC suite.
Any idea ?
Thanks
Maccabi

well not really a reply.
the file were saved in rtf that quickoffice is un able to read.
saved them in doc and voilla!!
for your information
maccabi

Can not open Word 2010 docx in Word 2013 from Outlook 2013 mail

Similar Messages

Maybe you are looking for