Can not Open XMD from EDK / can not find the firmware executable file

Hi,
I have two problems:
1. I finished generating the bitstream in the EDK project. But when I try to open XMD in the EDK menu by doing "Debug --> Launch XMD" The XMD doesnt shows up. While the EDK output window says "xterm -e xmd -xmp system.xmp -opt etc/xmd_microblaze_0.opt&"
does anyone know how to launch XMD from EDK?
The system I am using is Ubuntu 9.10, the EDK version is 10.1.03 and I also use USB to JTAG for programming the board, serial port from the desktop to serial port on 110T FPGA.
2. I start the XMD in terminal manually
and type the command " xmd -xmp system.xmp -opt etc/xmd_microblaze_0.opt& " in the directory where the system.xmp file located.
it shows the following error information
Xilinx Microprocessor Debug (XMD) Engine
Xilinx EDK 10.1.03 Build EDK_K_SP3.6
Copyright (c) 1995-2007 Xilinx, Inc. All rights reserved.
Overriding IP level properties ...
Address Map for Processor microblaze_0
(0000000000-0x00003fff) dlmb_cntlr     dlmb
(0000000000-0x00003fff) ilmb_cntlr     ilmb
(0x40600000-0x4060ffff) RS232_Uart_1     mb_plb
(0x40c00000-0x40c0ffff) Hard_Ethernet_MAC     mb_plb
(0x41200000-0x4120ffff) xps_intc_0     mb_plb
(0x41400000-0x4140ffff) debug_module     mb_plb
(0x74600000-0x7460ffff) DDR2_SDRAM     mb_plb
(0x80000000-0x8fffffff) DDR2_SDRAM     mb_plb
(0x80000000-0x8fffffff) DDR2_SDRAM     dxcl
(0x80000000-0x8fffffff) DDR2_SDRAM     ixcl
XMD%
ERROR:MDT - Options file (etc/xmd_microblaze_0.opt&), Not Found or Not Readable
ERROR:MDT -
-- Error in XMD Initialization. Type "exit" to Quit XMD
does anyone know how to fix the problem?
Many thanks!

Hi,
I had some trouble with XMD on Ubuntu too.
I wrote an install guide including adjustment of XMD.
You can check it out at my website: [EDK 10.1 Installation on Ubuntu 9.04 64Bit|http://wienker.org/blog/?p=78]
Cheers

Similar Messages

  • Windows Vista home addition want let Icloud execute. I went into the DEP program but I can not find the Apple exe file to add as ok. What is the file name?

    Windows Vista home additon want let Iclud execute. I went into the DEP program but I can not find the Apple exe file to add as ok. What is the file name?

    Hey,
    if you know the name(s) of the root folder(s) you want to access (eg. by making a note on the Windows side) then you can make them appear by just doing Shift-Command-G in Finder ("Go to Folder…"), and entering the full path to the required folders.  You can then navigate all the contents as normal.
    HTH,
    S.

  • I keep getting the error that says: "APSDAEMON.exe cannot open since itunes can't find the msvcr80.dll file.  Any assistance on how to fix this is greatly appreciated.

    I keep getting the error that says: "APSDAEMON.exe cannot open since itunes can't find the msvcr80.dll file.  Any assistance on how to fix this is greatly appreciated.

    Click here and follow the instructions.
    (98703)

  • My iPad is filling up my PowerBook hard disk. Where can I find the sync Photo file to delete it ?

    Hi
    My iPad is filling up my PowerBook hard disk. Where can I find the sync Photo file to delete it ?
    Copying over photos via iTunes/iPhoto - there is a back-up file created (I can not turn it off) and it's now filling my PB-Pro.
    So I need to find it and trash it and start over.
    - Where is it located ?
    - What is it's name ?
    Yours Bengt W

    Thank You
    I found my iPhoto library
    ctrl-clicked on it and opened package/content
    here I found the iPod photo cashe folder
    copyed this to a safe hard disk
    then deleting it's content
    and my memory/free space on boot drive is back
    So I hope all's well.
    Yours Bengt W

  • Where can I find the deployed EJB files in Oracle 10g AS(904)

    Hello All,
    Where can I find the deployed ejb files, stubs and skels in the Oracle 10g (904)
    When I try to run my ejb application I m getting following exception:
    com.evermind.server.rmi.OrionRemoteException: Error (de-)serializing object: org.apache.log4j.Logger
    I am not sure what is causing this error. I am not using any logging in my EJB. But the logging framework is configured in the application server.
    Your input would be a great help to me
    Thank you

    Thanks Carty,
    I am not creating Connection from EJB. I have a POJO called DBManager that looks for the DB Connection and return that to either EJB or other POJO that requests for Connection.
    I am having a private method that get the connection from the DBManager because while writing UnitTest cases I can mockup getting Connection as my Unit test case will be a POJO again..
    I have a question here regarding making DBManager as Singleton class. In my current project, I have configured my database in the application server as getting the connection by lookup for datasource through JNDI. It internally maintains all logical connection and always have one physical connection. In such scenario how implementing singleton will be beneficial?
    Thank you for answering all my questions.

  • Oracle Report is not finding the prt configuration file on 10G?

    Oracle Report is not finding the prt configuration file on reports server 10G.
    On another enviroment I had installed only Forms and Reports services. Here was finding
    the prt configuration file and running ok.
    Now I have "infrastructure" and "forms and reports services" and the reports server is not finding the prt configuration file.
    I have the Internet Directory, Single Sign-on, oca, OC4J_SECURITY services "infrastructure" and the forms and reports services on the same machine.
    Can somebody help me?
    Celso
    Edited by: user575217 on 17/09/2008 06:52

    Definitions (explicit or implicit) on client side overwrite settings on server side. If not set explicitly, parameters like NLS_SORT and NLS_COMP are derived from environment variable NLS_LANG. If NLS_LANG is not set, it defaults to AMERICAN_AMERICA.US7ASCII. If client OS is Windows, the installer sets NLS_LANG according to the language of the OS (and writes the value into the registry), on UNIX NLS_LANG is not set automatically.

  • Where can I find the latest cab file?

    Where can I find the latest cab file? for example:
    CODEBASE=http://java.sun.com/update/1.5.0/jinstall-1_5_0_05-windows-i586.cab
    CLASSID=clsid:5852F5ED-8BF4-11D4-A245-0080C6F74284 It is not available on this page: http://java.com/en/download/manual.jsp
    I am deploying using web start. So I need it.
    thanks,
    Anil

    Download Java EE SDK, install it and finally in the lib directory you'll find the javaee.jar. It contains the whole javax package you need.

  • Where can I find the a downloaded file by Software update?

    Where can I find the a downloaded file by Software update?
    For example is there any way to find a package which is downloaded but is not installed(because the installation failed) (in this case 10.5.5) and I don't want to download it once again neither manually nor with software update.

    sina_golesorkhi wrote:
    Where can I find the a downloaded file by Software update?
    In ~/Downloads
    For example is there any way to find a package which is downloaded but is not installed(because the installation failed) (in this case 10.5.5)
    Failed installs usually remove the package, just as a proper install removes the package
    All that remains for a proper installation is a Receipt in on of the following directories:
    ~/Library/Receipts (for user-specific installs)
    Macintosh HD/Library/Receipts
    for system-wide installations, including OS-X updates.
    and I don't want to download it once again neither manually nor with software update.
    If it did not install, there is no Receipt and the downloaded file is not on your system
    If you don't want to see it again in automatic updates, put it on ignore.

  • HT201210 where can i find the back up file for my iphone?

    its not backing up. its said i have to delete the corrupted back up file first, but where can i find the back up file? thanks

    You can look this up using the Support search bar at the top of this page.
    iTunes: About iOS backups

  • How do I reload my bookmarks if I can't find the 'date.json' file in my backup?

    My hard drive crashed and everything had to be retrieved and reinstalled. I have a folder of old Firefox data but can't find the 'date.json' file that is indicated to open in the troubleshooting instructions. Is there another option?

    Hello,
    If you have the latest Firefox version, the ''places.sqlite'' file is what holds your bookmarks. Please see the article [[Recovering important data from an old profile]] for more information.

  • Error: "Could not find the main class: Files\NetBeans"

    I am working on a WorldWind mapping application but I think this issue is more of a straight Java question. I was attempting to add a web service reference by means of the NetBeans IDE. The reference compiled as it should have but then the application would not run. I deleted the reference, commented out all the code that used the web reference, basically restored all the code to how it was before trying to add the web service. The applicaiton still will not run with the message that it can't find the main class. I do, however, get a clean build. What should I do to fix this?
    Here is the error: "Could not find the main class: Files\NetBeans"
    thanks!

    nigel25840 wrote:
    I am working on a WorldWind mapping application but I think this issue is more of a straight Java question. I was attempting to add a web service reference by means of the NetBeans IDE. The reference compiled as it should have but then the application would not run. I deleted the reference, commented out all the code that used the web reference, basically restored all the code to how it was before trying to add the web service. The applicaiton still will not run with the message that it can't find the main class. I do, however, get a clean build. What should I do to fix this?
    Here is the error: "Could not find the main class: Files\NetBeans"
    thanks!Sounds like something (a .cmd file or .bat file, perhaps) is set up to launch NetBeans with a command line like this:
    java -classpath ... c:\Program Files\NetBeans ...
    So since the path has embedded space(s) in it, it thinks you are wanting to run a class named "Files\NetBeans", which does not exist.
    You need someone there who knows what they are doing to look into it for you.

  • I saved an iMovie to DVD and now I can't find the original working files in iMovie Project library to make additional edits. What happened to the files? Thx!

    I saved an iMovie to DVD and now I can't find the original working files in iMovie Project library to make additional edits. What happened to the files? Thx!

    Did you do the moving of the image file in the Finder or do you have a reference library as asked by Larry? In either case moving the files is a recipe for disaster as you've found out. You must either move the files back to their original locations or try to get those photos back into iPhoto as follows:
    1 - Find the folder you moved the files into and COPY it to the Desktop.
    2 - in iPhoto delete the photos that you're having the problems with as you normally would even though you can't see see them. Also delete all the photos that are in the folder you moved the other files into.
    3 - drag the folder on the Desktop into iPhoto to import them as one event. If you get a duplicate warning I'd let it import the duplicate and use Duplicate Annihilator to find them so you can cull out the duplicate you don't want.
    Other than that you might have to start over from scratch as follows:
    Creating a new library while preserving the Events from the original library.
    1 - Move the existing library folder to the desktop
    2 - Open the library package like this.
    3 - Launch iPhoto and, when asked, select the option to create a new library.
    4 - Drag the Originals folder from the iPhoto Library on the desktop into the open iPhoto window.
    OT

  • Where can I find the Brushes (abr) file format?

    I've found the Photoshop File Format Specs at: http://www.adobe.com/devnet-apps/photoshop/fileformatashtml
    But unfortunately they don't include the Brushes (abr) file format.
    Also, the SDK FAQ references a form you are supposed to fill to ask for this, but there's no such a form anymore.
    Where can I find information about this?
    Thanks in advance
    F.

    sina_golesorkhi wrote:
    Where can I find the a downloaded file by Software update?
    In ~/Downloads
    For example is there any way to find a package which is downloaded but is not installed(because the installation failed) (in this case 10.5.5)
    Failed installs usually remove the package, just as a proper install removes the package
    All that remains for a proper installation is a Receipt in on of the following directories:
    ~/Library/Receipts (for user-specific installs)
    Macintosh HD/Library/Receipts
    for system-wide installations, including OS-X updates.
    and I don't want to download it once again neither manually nor with software update.
    If it did not install, there is no Receipt and the downloaded file is not on your system
    If you don't want to see it again in automatic updates, put it on ignore.

  • HT1222 When I try to install iTunes 10.7 it says it can't find the iTune64.msi file. I can't seem to find a replacement download for that file.

    I have ITunes installed on my PC which runs Windows Vista in support of my IPad.  When I try to install the update for ITunes 10.7 version, it says it can't find the "itunes64.msi" file.  How do I correct this, or where can I find a download for the itunes64.msi file?

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get aCode 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • Edge Animate could not find the associated html file - anyway

    We have another thread discussing this issue at http://forums.adobe.com/message/5331743
    But it is out of date and marked with a green-icon positive solution, so..
    still I try to reopen the issue about an error of "Edge Animate could not find the associated html file"
    for me, this error remains even after opening and saving corresponding html file.
    in fact I don't remember any successful launch of .an file for all my projects
    working at win 7, 64 bit

    ok I shared this via dropbox
    https://www.dropbox.com/sh/gwknsik2j5i4pe0/TB8WGNNLMU

Maybe you are looking for