Can not perform local client copy

Hi Expert,
I am not able to perform the local client copy for newly created on production server as system not accepting standard password 'PASS' for user SAP*. 
Same is working fine at IDES server.
Please help
Thanks
Gaurav

Hi,
Make sure there's a profile parameter: login/no_automatic_user_sapstar = 0 and  then restarted?
U can change the parameter by:
Execute T-Code RZ10 and the select default.pfl form the list of profiles avaialable
then go to edit mode and then click on create
Give the name of the parameter and its value and then save the profile
then it will ask you to activate the profile, Now just click on Ok, it will done
Restart the  system and it will work fine.
Or
Just go to RZ10>>>>select instance profile>>>>extended maintanance>>>>change>>>>change the value for parameter>>>>>copy>>>>back>>>>>save&activate
Thanks
Ruchika
Edited by: Ruchika Kapoor on Aug 17, 2009 1:58 PM

Similar Messages

  • Local Client Copy Error : Completed w. Dictionary Errors

    Hi,
    I have performed local client copy in the ECC 6.0 system.I mean SAP Netweaver 7.0 EHP1.I have selected source system 100 and target system 200 and profile is SAP_CUST with my User ID in 200 client having SAP_ALL,SAP_NEW.In the SCC3 throws error i,.e, Completed w. Dictionary Errors.The client 200 is newly created in the system.
    Target Client             200
    Source Client           100
    Copy Type               Local Copy
    Profile                      SAP_CUST
    Status                      Completed w. Dictionary Errors
    User                        I998769
    Start on                   06.12.2009 / 12:47:59
    Last Entry on          06.12.2009 / 14:00:12
    Statistics for this Run
    - No. of Tables            56872 of     58391
    - Deleted Lines           5705995
    - Copied Lines            5770444
    Warnings and Errors
    Table Name             Component          Package
    A001                   SD-MD-CM           DDIC Error        (See SE14)
    A004                   SD-MD-CM           DDIC Error        (See SE14)
    A005                   SD-MD-CM           DDIC Error        (See SE14)
    A006                   SD-MD-CM           DDIC Error        (See SE14)
    A007                   SD-MD-CM           DDIC Error        (See SE14)
    A009                   SD-MD-CM           DDIC Error        (See SE14)
    A010                   SD-MD-CM           DDIC Error        (See SE14)
    A012                   SD-MD-CM           DDIC Error        (See SE14)
    A015                   SD-MD-CM           DDIC Error        (See SE14)
    Nearly about 1520 tables are not copied from the source client and there is no dumps for that.Please,find below for the file log information which is highlighted in red color in log.
       Start of post-processing by application exits 13:57:48
       Automatic postprocessing of client 200 was incorrect -> long text
       Post-processing required for FINB_TR_CC_EXIT_TARGET
       Validation/substitution: Programs should be regenerated
       Selected tables           :         58.391
       Copied data in kBytes  :      2.933.491
       Deleted data in kBytes :      2.845.416
       Program ended with error or warning, return code: W
       Runtime (seconds)         :          4.333
       End of processing: 14:00:12
    Kindly,help me how to resolve the issue and provide relavent notes which is applicable to my error as per the SAP release.

    Hi,
    We encounter the same problem with different A***-tables. The problem is that these seem to be pooled tables. I had a look at sap note 1248769 and it mentions that the reconstruct-option is only liable for transparent tables. This seems to be right, as the option "Reconstruct" is greyed out in tx SE14 when we try to.
    Any other options?
    Jan
    PS. Sorry for hijacking the thread, but it seems the topic starter is still looking for an answer as well
    Edit: Found another SAP Note which seems relevant: 1171306. This note has the following segment in it:
    If you still want to remove the inconsistency, you can proceed as described in the following.  However, the table must be empty for you to be able to do this (you can check this with the report NROWS:  start the report NROWS, enter DVPOOLTEXT for "Table 1" on the selection screen and choose Execute.)
    1. Call transaction SE14.
    2. Edit DVPOOLTEXT.
    3. Delete the database table.
    4. Create a database table.
    If the pool is not empty and the data is required, it must be unloaded in advance and then read again after you have recreated the table.
    Ofcourse we would like to preserve our data in the tables. Let's take a look at an example in our system: Table A017. This table has encountered the DDIC error during client copy. We have performed the following analysis actions on it:
    Report NROWS mentions 116.390 entries for table A017.
    In SE16 table A017 has 0 entries.
    In SE14 I have performed two checks: The runtime object seems ok. When I check database object in SE14 the system returns the following message: "Table is not created in database".
    Any tips?
    Edited by: Jan Laros on Sep 8, 2010 2:25 PM

  • Local client copy for delta changes

    Hello Support,
    We have requirement of copying data(local client copy) of last one month. This is a rrepetitiveactivity and has to be done once in every month.
    For example, in DEV we have 3 clients 200, 210 clients. They make changes in 200 client and these changes has to be reflected in 210 clients. For changing 1 month data we can't perform client copy with SAP_ALL.
    I have an idea that we can perform local client copy using TDMS 4.0 but can we do delta client copy?
    So, my question here is
    1. Can we perform client copy for specific selected data(by date, for eg last 30days) without deleting existing data?
    2. We have step 'Start Deletion of Data in Receiving System' in Time Based Reduction scenario, can we skip this and continue proceed with client copy?
    Thanks,
    Uday.

    Hello Uday,
    SAP TDMS Time based reduction package copies the whole of master data and customization data along with the transactional data being filtered based on the Data Slice Date Provided.
    SAP TDMS cannot be used for a Delta Copy to copy only a months data keeping the existing data in the system. If the requiremnt is to run every month, you could give an approritate slice date and transfer the whole data again using SAP TDMS which would include the latest one month data as well.
    It is not recommended to skip the step "Data deletion in Receiver system" and then execute the SAP TDMS package. This can lead to issue during the transfer.
    Regards,
    Sreejith Rajashekaran

  • Local client copy error very..very......urgent

    Hi experts,
    while i am performing local client copy in background mode from 000 to 200
    it is terminattin and it showing the below error
    Target Client           200
    Source Client                   000
    Copy Type               Local Copy
    Profile                 SAP_CUST
    Status                  Cancelled
    User                    SAP*
    Start on                10.05.2008 / 14:53:00
    Last Entry on           10.05.2008 / 14:53:51
    Statistics for this Run
    - No. of Tables                 0 of     53448
    - Copied Lines                  0
    Check System Log (SM21)
    arnings and Errors
    Table Name       Component Package
    /1FB/MD___3M0001           DDIC Error        (See SE14)
    /1FB/MD___3M0002           DDIC Error        (See SE14)
    /1FB/MD___3M0003           DDIC Error        (See SE14)
    /1FB/MD___3M0004           DDIC Error        (See SE14)
    /1FB/MD___3M0005           DDIC Error        (See SE14)
    /1FB/MD___3M0006           DDIC Error        (See SE14)
    /1FB/MD___3M0007           DDIC Error        (See SE14)
    /1FB/MD___3M0008           DDIC Error        (See SE14)
    /1FB/MD___3M0009           DDIC Error        (See SE14)
    /1FB/MD___3M000A           DDIC Error        (See SE14)
    /1FB/MD___3M000B           DDIC Error        (See SE14)
    /1FB/MD___3M000C           DDIC Error        (See SE14)
    /1FB/MD___3M000D           DDIC Error        (See SE14)
    /1FB/MD___3M000E           DDIC Error        (See SE14)
    /1FB/MD___3M000F           DDIC Error        (See SE14)
    /1FB/MD___3M000G           DDIC Error        (See SE14)
    /1FB/MD___3M000H           DDIC Error        (See SE14)
    and when i checkd in system log in sm21 it is showing
    he transaction has been terminated.  This may be caused by a
    ermination message from the application (MESSAGE Axxx) or by an
    rror detected by the SAP System due to which it makes no sense to
    roceed with the transaction.  The actual reason for the termination
    s indicated by the T100 message and the parameters.
    plz......any one can help me
    cheers
    deepak

    Actually it is problem with my database
    recently i restored my database after that i performd client copy
    when i am doing it above error showed in scc3 i checked the system log in that i found oracle error for that i reused my temp datafile using sql commands
    SQL:>alter tablespace PSAPTEMP 'path of the file' add tempfile reuse;
    finally i finished the my client copy with out any error
    regards
    deepak

  • Local Client Copy Hanged

    Hi All,
    My ERP version is ECC 6.0 DB is Oracle 10g OS: Windows.
    When i am performing Local Client Copy from 000 to 111, the copy is hanged and in SM50 it is showing
    8     BGD     3580     Running          Yes                    15158     SAPMS38L     111     SAP*     Delete     D010INC
    Log:
    3 EGZ211 Report RGCUMRSE successfully generated for databases "FILCT" "FILCA"
    In the log above is the last line and hereafter it is not going further. In the log it is not showing any error.
    Please analyse this.
    Regards,
    Praveen Merugu

    Hi
    Client Copy process is require to lock the source client while copying and How long the process running ?
    Regards
    Anwer Waseem
    SAP BASIS

  • Local client copy error - Table "BKPF" not edited due to excessive number

    Hi,
    I am performing a local client copy on our ECC 6.0 system. Client copy took more than 12 hours and its still in progress with 7 tables still to be copied. Logs in SCC3 -
    ===
    2 ETA163 Table "BKPF" not edited due to excessive number of errors
    2 ETA057 WARNING: Cancelled several times
    2 ETA163 Table "COEP" not edited due to excessive number of errors
    3 ETA311 Process "00002" started on server "sfrndevsap15"
    (time: "17:20:51")
    2 ETA297 Error: Table "ONROV" error in DDIC - Check table with SE14
    2 ETA057 WARNING: Cancelled several times
    2 ETA163 Table "FAGLFLEXA" not edited due to excessive number of errors
    3 ETA311 Process "00003" started on server "sfrndevsap15"
    (time: "17:20:52")
    4 ETA346 "FAGLFLEXC :"" 0 0 0 DEL.""
    0 0 17:20:52"
    2 ETA057 WARNING: Cancelled several times
    2 ETA163 Table "HRP1001" not edited due to excessive number of errors
    3 ETA311 Process "00004" started on server "sfrndevsap15"
    (time: "17:20:52")
    4 ETA346 "VSAFVU_CN :"" 0 86123 0 DEL.""
    0 29 17:21:21"
    2 ETA057 WARNING: Cancelled several times
    2 ETA163 Table "PCL4" not edited due to excessive number of errors
    ===
    Please help ASAP, as this is effecting our testing team.  I have tried to copy individual tables also using a transport request number and SCC1 to copy it to the target client.  This is also taking quite a long time.
    Thanks in advance,
    Abdul

    Hi Abdul,
    What does your system log say ?
    Check this SAP Note
    Note 579783 - CC ERROR: Loss of data - table not copied
    run the report RSCC_VERIFY to check if the table is consistent within the source client.
    SAP will only provide support for RSCC_VERIFY messages if there is a specific problem in an application in the target client that can be assigned immediately to the messages.
    RSCC_VERIFY is delivered with SAPKB46B49, SAPKB46C35 and SAPKB46D24. In older releases, you can create the report in the ABAP editor (transaction SE38) in accordance with the attached advance correction. Use the development class or the STRM package for this.
    Regards,
    Siddhesh

  • Condition record's not getting copied in local client copy !!!

    Hi ALL,
    I have a one question/doubt regarding local client copy.
    Our functional team creates condition type (for e.g.: thru FV11 for MM) in one client (golden), when I take client copy of that client with SAP_All profile, but condition type is not getting copied in the new client.
    I found for Sap notes, in one note it was suggested that change documents are not copied with any profiles.
    I found in FV11, there is one option, Send Condition, thru which we can send by Logical systems, but its giving error msg u201CNo relevant partner system DEVCLNT300 exists for output category COND_A
    Message no. VJ000u201D
    Can u pls suggest proper way to copy/transport condition record in new client created?
    Regards,
    C  Singh.

    Please refer below link
    http://help.sap.com/saphelp_dimp50/helpdata/EN/19/337d937f0311d2b467006094b9c9be/frameset.htm
    Regards,
    Pavan

  • Can we create a local client copy for the RFID Client in discovery Box

    Can we create a local client copy for the RFID(400 Client) in the Discovery Box,and if created which profile we have to select for the client and also at a time we can work on these both client or not  .

    This isn't possible with Live Mail.  Acrobat has an add-in for Outlook (which you've used), but there is no similar function for Live Mail.

  • Local client copy profile SAP_CUSV: Configuration not working

    Dear Experts,
    My configuration client is 350 and my new client is 100 in same DEV system. Client 100 is copied from client 000 with profile SAP_ALL. Then I created a local copy from 350 using profile SAP_CUSV into same client 100. After that I am facing issues under HCM module. All the HCM configuration that works well in 350 does not work in client 100 even the standard header configuration of PA30 does not work. All the customizing entries are however present in HCM configuration tables but system seems not to read anything from HCM configuration. Apart from screen headers, the configuration done by consultant also has conflicts and system shows an error to maintain entries in tables which are already maintained and visible in configuration tables in 100. An example of error in which system gives error of maintaining Payscale Type and Payscale Area in table T510 is attached where as the entries are maintained in given table.
    Best Regards,

    Hi,
    Please check the following notes.
    1946003 - Client copy completed with Dictionary error
    1171306 - Error with pooled tables when copying a client
    686357 - Table pool has incorrect length following Unicode conversion
    Please close the thread if this address your issues.
    Thanks 
    Adil

  • Local client copy not starting

    hi... all
    i have started a local client copy but after taking 3 hour it not start copy
    in sm12 , it shows 2 entries r lock, i have deleted these entries and stop/start mmc. try again local client copy, same enteries r lock in sm12
    plz guide me
    Best Regard
    Imran

    after 13 hour the status is given below
    In scc3
    Target Client           200
    Source Client           100
    Copy Type               Local Copy
    Profile                 SAP_CUST
    Status                  Processing...
    User                    SAP*
    Start on                28.05.2009 / 20:08:24
    Last Entry on           28.05.2009 / 20:09:53
    Statistics for this Run
    - No. of Tables                 0 of     54540
    - Copied Lines                  0
    In sm12
    200     SAP*     28.05.2009 E     RSTABLE CLIENT COPY SOURCE   100     0     1
    200     SAP*     28.05.2009     E     RSTABLE     RSCLICOPY       200     0     1
    In sm66
    Server Name No. Type PID Status Reason Sem Start Error CPU Time User     Report 
    devsap_DEV_00 12 BTC 4324 Running             Yes                  52043 SAP* CL_SQL_S
    in sm50
    No.       type        PID       status     start time      report client user report table
    0         DIA     4252     Waiting Yes                         
    1         DIA     4260     Running Yes     SAPLTHFB     200     SAP*     
    2     DIA     4984     Waiting Yes                         
    3     DIA     4272     Waiting Yes                         
    4     DIA     1188     Waiting Yes                         
    5     DIA     4284     Waiting Yes                         
    6     DIA     4288     Waiting Yes                         
    7     DIA     4292     Waiting Yes                         
    8     DIA     4304     Waiting Yes                         
    9     DIA     4968     Waiting Yes                         
    10     UPD     4976     Waiting Yes                         
    11     ENQ     4940     Waiting Yes                         
    12     BGD     4324     Running Yes  52332 CL_SQL_STATEMENT-CP 200     SAP*

  • Local client copy not working

    I m trying to do local client copy from 000 to 400 while it has given error that RFC needs to created for FINBASIS component. After searching the net  i come across that to do that we need to implement note 568784. However while uploading note from desktop it is giving ABAP Short dump
    Runtime Errors   : CONVT_NO_NUMBER in progarm SAPLSCWU
    any help apprecited
    regards
    mangesh

    This note doesn't actually require that you upload it. In fact, all you really need to do is create the RFC destination (as directed within the note) and then run transaction FINB_TR_DEST.
    Hope that helps.
    J. Haynes

  • Local Client Copy taking too much time

    Hi All,
    I recently done a system refresh of my Quality server (restore PRD backup to QUA Server)
    After that I have created a new client and has initiated a local client copy after the test run
    went successful.
    Then after reading approximately 4500 table it has got stuck and I saw in SM50 that table "ACCTCR"
    was running since approximately 56000 seconds.
    Then I run the program 'BTCTRNS1" to clean the work processes.
    After that I again restarted the local client copy in restart mode.
    Now since last 3 hours I can see in SM50 that table u201CACCTCR" is being sequentially ready for approx 500(under Actions) seconds and then delete for 15 seconds (under actions).
    I also found that table size is also not increasing as well as same table is being sequentially read for 500 sec and then deleted for 15 seconds (under Actions in sm50) and program is also same.
    This is happening since last 3 hours now.
    Under SCC3 I can see the status as processing reset.
    Does anyone face this issue ever? And can anyone suggest is everything is running OK or there is
    some problem.
    Your suggestions will be highly appreciated.
    Regards,
    PG

    Hello,
    Did you recalculate full DB statistics after the last system copy from PRD to QA ?
    This is very often forgotten, leading to long elapse times in select statements.
    Check via DB20 on table ACCTCR from when latest DB statistics date.
    Eventually rebuild all indexes from ACCTCR, this can be done online via ABAP RSANAORA if you are running Oracle.
    You can also perform an SQL trace on the current running process to see if the select from the client copy is running correctly.
    I also know that ACCTCR is a table containing transactional data and most of the time it contains a lot of data.
    II suppose you are running a client copy with profile SAP_ALL on QA based on a copy of PRD ?
    This means that you will end up with 2 production clients in QA ?
    Is your QA system sized for this ?
    Another question that you can ask your client, is data from ACCTCR really needed on QA on both clients.
    If not it is maybe better to start an archiving based on SAP Note :
    Note 83076 - MM_ACCTIT: Archiving programs for ACCTIT, ACCTHD, ACCTCR
    Followed by a new client copy.
    Success.
    Wim

  • Local Client Copy Error in Post-Processing

    Hello All,
    We are facing issues in local client copy on SRM 5.5 system Basis 700 SP19 with Oracle Db. I have ran the same twice. Also performed the update statistics on db.
    All the tables are getting copied but the error or warning is occuring in "Post-Processing" phase.
    Table Name                  Component       Package
    /SAPCND/CC_GROUP_WS_NG      AP-PRC-CON      Post-Processing Required
    Following entires in the file logs are displayed:
    Begin of GEN_STATUS Update
    Generation of working set structure /1CN/WS_ID_200MOM_TAX started.
    No fields in structure /1CN/WS_ID_200MOM_TAX
    Postprocessing necessary when upgrade has been completed
    Generation of working set structure /1CN/WS_IS_200MOM_TAX started.
    No fields in structure /1CN/WS_IS_200MOM_TAX
    Postprocessing necessary when upgrade has been completed
    Generation of working set structure /1CN/WS_ED_200MOM_TAX started.
    No fields in structure /1CN/WS_ED_200MOM_TAX
    Postprocessing necessary when upgrade has been completed
    Generation of working set structure /1CN/WS_ES_200MOM_TAX started.
    No fields in structure /1CN/WS_ES_200MOM_TAX
    Postprocessing necessary when upgrade has been completed
    Generation of working set structure /1CN/WS_UI_200MOM_TAX started.
    No fields in structure /1CN/WS_UI_200MOM_TAX
    Postprocessing necessary when upgrade has been completed
    Begin of GEN_STATUS Update
    Its help says "Postprocessing necessary when upgrade has been completed. For a more detailed description, see the previous message /SAPCND/GENERATOR381.Message no. PU139"
    Can anyone guide me the best way forward.
    Thanks,
    Antarpreet

    Hello Gagan,
    I am facing the errors in table /SAPCND/CC_GROUP_WS_NG belonging to component AP-PRC-CON. It says post processing required.
    The oss note says about component FINB-TR-DERIVATION.
    I am not sure whether it is good to run the steps as mentioned in oss note 1235955.
    Thanks for your response and look forward to further help.
    Regards,
    Antarpreet

  • Extremely slow during Local client copy

    Hi guru's,
    We have planed for the local client copy in our system.Normally it would n't take much time(generally it will finished between 8 to 9 hr max), but this  time it took 4 days still it's running.
    how to know why it took so long to complete?
    thanks in advance
    best regards
    venkat.

    Dear,
    Venkat.
    Can i know your SAP Version ,OS,database. &  size of the database.
    If you want to improve the performance.you have to exclude the data
    Improving client copy performance: Excluding data
    You can improve the performance of the client copy by, for example, by excluding tables or packages.
    You can exclude tables from the client copy, for example if they are not relevant for the target client, in the Tables tab. For further information about excluding tables from the client copy, choose the Help button in the expert settings.
    For further information about expert settings in the client copy, see the SAP note 446485.
    by this your client copy performance can be increased.
    Warm Regards.
    Mohammed Hassan Naveed
    Associate SAP Basis Consultant
    Mumbai.

  • Local client copy TCODE SCCL

    Hi BASIS Gurus,
    Please help me troubleshooting my local client copy. Below are my concerns.
    Summary:
    1. Client copy is running in background.
    2. DB size is 250GB.
    3. Oracle 9
    4. Windows 2003
    Concerns:
    1. Ran in source: client, SM50 shows sequential read from table COEP, after sequential action became delete. My worry is instead of action delete it should be insert right?
    2. Copy is still on COEP table after 4hours. Is this normal?
    3. I cant logon anymore to target client because it already copied the sap* of the source. I tried to delete the sap* table USR02 from target client and still no luck, user sap* is still locked. any sugestions?
    4. I've been running the background client copy for almost 14hours. is there away to add parallel processes to speed up client copy?
    Thanks in advance.
    best regards,
    Joel

    Hi,
    1. Ran in source: client, SM50 shows sequential read from table COEP, after sequential action became delete. My worry is instead of action delete it should be insert right?
    It should be delete as client copy will delete existing data before copying
    2. Copy is still on COEP table after 4hours. Is this normal?
    This purely depends upon size of table and your system performance
    3. I cant logon anymore to target client because it already copied the sap* of the source. I tried to delete the sap* table USR02 from target client and still no luck, user sap* is still locked. any sugestions?
    It should work , eventhough you can try using any other user of source system , may be missing missing something ..But logon should work with SAP* , if its not avilabe in database (make sure you have deleted SAP* from target client )
    4. I've been running the background client copy for almost 14hours. is there away to add parallel processes to speed up client copy?
    Now you can not add parallel processing , one thing you can do is run update statistics that helped me lot of time  to speed up processing.
    Regards,

Maybe you are looking for

  • I updated to 7.1 and now when I plug my phone into the computer, it says there are no pictures??????

    I updated to 7.1 and now when I plug my phone into the computer, it says there are no pictures??????  When I have 500 pictures on it!!!!!  Im soooooo mad I did the update! Worst decision ever!!!!!!!!!!   I am SOOOO ready to leave the IPHONE alone- ma

  • Captivate CS6 Preloader (SWF) Error

    So - I changed the Captivate preloader value to 20%.  Now, I get an error when runnig the SWF with the Flash Debugger - ReferenceError: Error #1065: Variable CPPreloader is not defined. Huh??

  • Cursor and invisible plots

    I saw the same question but not an answer, yet. A cursor tracks invisible plots. Disabling plots doesn't work either.

  • Putting scrollbar on frame

    Dear All How can we put a scrollbar on frame so that all the coponents may visible on frame. Thanks

  • Streaming TO Twitch.tv

    Hey Thar, I had Infinity 2 installed on 17th September. I was happy. I play World of Warcraft & started to stream my self & pals playing the game to Twitch.tv. It worked perfectly & all was dandy. The past week however, since Sunday 1st September, wh