Can not ping, samba or else to the client which connected to the same WRVS4400N router
I buy a WRVS4400N router. Setup to surf internet successfully.
But each client can't ping, samba, file sharing to each connect to WRVS4400N.
In the router admin page. We can see each client connect to the router.
I have one SSID only. And setup the
Wireless Isolation (between SSID w/o VLAN)
and
Wireless Isolation (within SSID)
both to disable.
And have reboot it several times.
Please post the output of:
lspci -knn|grep -iA2 net
How are you attempting to search & connect to your router?
Please post the exact commands used and the exact terminal output resulting from these commands.
Similar Messages
-
The client cannot connect to the server
we just installed the boe but found that the client cannot connect to the server.
server: windows server 2008
boe xi3
client: window xp sp3
the server and client are in same dns
all components are work in server but client.
any idea on this?
ps: i can ping the server name successful.
thanks
ada
Edited by: Ada_Wei on Oct 29, 2010 10:12 AMCan you please try to stop and disable the Windows firewall service on your client machine?
WHich client do you use and which error message do you get exactly?
Regards,
Stratos -
HT1338 can not retrieve os send email even though I'm connected to the internet
How can I get my email working again? I can call up old mail using help, but I can not receive new emails or send emails.I can however erase old emails.
I think Adobe has problems with its server since the last 2 days. Everyone is experiencing these problems world wide. Not all the time but several hours a day.
-
I am trying to update my software but the server returns with an error....Software Update can’t connect to the update server. Make sure you’re connected to the Internet, and then try again. Please help...
Granite Apple wrote:
Thanks for the tip - didn't work for me unfortunately. Is it necessary to restart after removing the preference file?
Yes. However this is the process I should have recommened. Remove the plist as mentioned about then restart the computer in Safe Mode and then try Software Update in Safe Mode. Once done then restart normally. A Safe Mode restart will clear some caches, it's possible one has become corrupt. -
I have a Brother MFC-J835DW wireless printer (which is on the list of supported printers for Airprint), and have both the IPad 2 and the printer connected to the same wireless network. When I try to select the printer to print fromt he iPad, it cannot find the printer. Any ideas?
The first thing to do is to make sure that your printer has the latest firmware. You can download the firmware updater from Brother:
http://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/dlf/000000/002700/d lf002793.html?reg=us&c=us&lang=en&prod=mfcj835dw_us&type2=4&os=108&flang=4&dlid= dlf002793 -
How IPAD use the Printer which connected with the Time Capsule
I connnected a printer to time capsule. And I can use the printer in Windows. But I can't use it on IPAD and IPHONE.
So are there any solutions?iOS devices can only print directly to AirPrint printers. Wireless printers or printers connected to a Time Capsule are not necessarily AirPrint capable.
To print directly from an iPad / iPhone you will need an AirPrint compatible printer or another device to act as a print server. That can be a Mac computer running Printopia ($19.95 with free trial) or handyPrint (donation - supported). The Mac must be "on" but may be asleep for them to work. Equivalent PC options exist but you're on your own finding them.
You can also buy this standalone print server:
http://www.lantronix.com/it-management/xprintserver/xprintserver.html
The xPrintServer Home Edition will support a directly connected USB printer. The Network Edition will support any network printer.
These options enable you to use any printer available to your Mac, even older ones that may predate AirPrint by decades.
Otherwise you will need to buy an AirPrint printer or multifunction device. -
New-Pssession client cannot connect to the destination specified
I've used the following cmdlets to connect powershell to our tenant for months and now I cannot open a possession with the same commands.
I've searched on some of the error text show below without any great progress. We have a pair of Hybrid servers and we get the same result on either.
Any suggestions are appreciated.
Bruce
Import-module msonline
$O365Cred = Get-Credential
$O365Session = New-PSSession –ConfigurationName Microsoft.Exchange -ConnectionUri https://ps.outlook.com/powershell -Credential $O365Cred -Authentication Basic -AllowRedirection
Import-PSSession $O365Session
Connect-MsolService –Credential $O365Cred
[email protected]
working password at the MicrosoftOnline Portal
$O365Session = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUri https://ps.outlook.com/powershell -Credential $O365Cred -Authentication Basic –AllowRedirection
WARNING: Your connection has been redirected to the following URI:
https://pod51038psh.outlook.com/powershell-liveid?PSVersion=4.0
New-PSSession : [pod51038psh.outlook.com] Connecting to remote server pod51038psh.outlook.com failed with the following error message : The client cannot connect to the destination specified
in the request. Verify that the service on the destination is running and is accepting requests. Consult the logs and documentation for the WS-Management service running on the destination, most commonly IIS or WinRM. If the destination is the WinRM service,
run the following command on the destination to analyze and configure the WinRM service: "winrm quickconfig". For more information, see the about_Remote_Troubleshooting Help topic.
+ $O365Session = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUr ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotingTransportException + FullyQualifiedErrorId : CannotConnect,PSSessionOpenFailed
Import-PSSession $O365Session
Import-PSSession : Cannot validate argument on parameter 'Session'. The argument is null. Provide a valid value for the argument, and then try running the command again.
At line:1 char:18
+ Import-PSSession $O365Session
+
~~~~~~~~~~~~
+ CategoryInfo
: InvalidData: (:) [Import-PSSession], ParameterBindingValidationException
+ FullyQualifiedErrorId : ParameterArgumentValidationError,Microsoft.PowerShell.Commands.ImportPSSessionCommand
Connect-MsolService -Credential $O365CredYou are using the outdated URI string, which is known to cause problems. Should be: https://outlook.office365.com/powershell-liveid/
Just follow the instructions in the TechNet article:
https://technet.microsoft.com/en-us/library/jj984289(v=exchg.150).aspx -
Can not ping one of the IP in DMZ3(VLAN4) but can ping IP in DMZ2(VLAN2)
Any expert advise please.
There are three DMZ in datacentre firewall (5510)..dmz1 and 2 and 3
Here is the thing between Data centre and our office network.(firewall 5510)
I logged in one of our machine Domaincontroller (10.102.28.53) in office network I can ping IP: 10.1.2.52 (VLAN2-DMZ2) in datacentre.
I can not ping 192.168.4.230 (vlan4 dmz3) in datacentre from this machine 10.102.28.53
Thanks.make sure that the the firmware version of your router is the updated one.It should be firmware version:1.50.9.you can go to www.linksys.com/download and look for wrt54gs v6-->click downloads for this product-->click firmware-click download firmware and save it on your desktop...you can also go to linksys.com/kb and search for upgrade firmware and it will give you the steps on how to upgrade the firmware of your router.
Hope it helps!! -
Can not ping oracle linux vm in Virtual Box from my host
Hy
I have setup oracle linux 7 on virtual box including vboxadditions.
But I can not ping this maschine from outside ( it works for my other vm oel 5.8 )
I did systemctl stop filewall.service
Here my Network konfiguration inside my oel7 vm:
/etc/sysconfig/network-scripts/ifcfg-enp0s8
TYPE=Ethernet
BOOTPROTO=none
DEFROUTE=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=no
IPV6_AUTOCONF=yes
IPV6_DEFROUTE=yes
IPV6_FAILURE_FATAL=no
NAME=public
UUID=388ee413-55e9-45e1-be1d-4f5eedc402f3
ONBOOT=yes
IPADDR0=10.20.50.101
PREFIX0=24
IPV6_PEERDNS=yes
IPV6_PEERROUTES=yes
HWADDR=08:00:27:5F:87:91
Can anyone help?
Thanks
Peter SchlaegerHi,
Before discussing the network configuration of Oracle Linux 7 (By the way; it seams correct), lets talk about the VirtualBox network configuration, So the Network adapter of your VM can be attached to {NAT, Bridged Adapter, Internal Network, Host-only Adapter, ...}, what is the Adapter attached to your NIC?
Make sure the Network Adapter is the same as the your other VM (OL 5.8).
Best regards -
Can not ping internal network from ASA
I can not ping internal computer from ASA. Comp IP address 192.168.187.15, gateway is 192.168.187.14 which is ASA internal interface. I've got an IP Phone connected to the same ASA with Ip address 192.168.185.15 and internal ASA interface 192.168.185.14 and everything works fine. We are doing testing, do not be surprised of configuration.
ASA Version 8.2(1)
hostname ciscoasa
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
dns-guard
interface GigabitEthernet0/0
nameif ouside3
security-level 0
ip address 10.254.17.25 255.255.255.248
interface GigabitEthernet0/1
nameif outside
security-level 0
ip address 10.254.17.9 255.255.255.248
interface GigabitEthernet0/2
nameif Lan
security-level 100
ip address 192.168.185.14 255.255.255.0
interface GigabitEthernet0/3
nameif comp
security-level 50
ip address 192.168.187.14 255.255.255.0
interface Management0/0
nameif management
security-level 100
no ip address
management-only
boot system disk0:/asa821-k8.bin
ftp mode passive
access-list 110 extended permit ip any any
access-list nat extended permit ip any any
access-list allow_ping extended permit icmp any any echo-reply
access-list allow_ping extended permit icmp any any source-quench
access-list allow_ping extended permit icmp any any unreachable
access-list allow_ping extended permit icmp any any time-exceeded
access-list allow_ping extended permit udp any any eq isakmp
access-list allow_ping extended permit esp any any
access-list allow_ping extended permit ah any any
access-list allow_ping extended permit gre any any
access-list nonat extended permit ip any any
access-list nat2 extended permit ip any any
access-list nonat2 extended permit ip any any
pager lines 24
logging asdm informational
mtu ouside3 1500
mtu outside 1500
mtu Lan 1500
mtu comp 1500
mtu management 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (Lan) 0 access-list nonat
nat (Lan) 1 access-list nat
nat (comp) 0 access-list nonat
nat (comp) 1 access-list nat
access-group allow_ping in interface outside
router eigrp 2008
neighbor 10.254.17.10 interface outside
network 10.254.17.8 255.255.255.248
network 192.168.185.0 255.255.255.0
network 192.168.187.0 255.255.255.0
route outside 0.0.0.0 0.0.0.0 10.254.17.10 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.1.0 255.255.255.0 management
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set myset esp-3des esp-md5-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto map mymap 10 match address 110
crypto map mymap 10 set peer 10.254.17.10
crypto map mymap 10 set transform-set myset
crypto map mymap interface outside
crypto map mymap2 20 match address 110
crypto map mymap2 20 set peer 10.254.17.18
crypto map mymap2 20 set transform-set myset
crypto map mymap2 interface comp
crypto map mymap3 30 match address 110
crypto map mymap3 30 set peer 10.254.17.26
crypto map mymap3 30 set transform-set myset
crypto map mymap3 interface ouside3
crypto isakmp identity address
crypto isakmp enable ouside3
crypto isakmp enable outside
crypto isakmp enable comp
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash md5
group 2
lifetime 28800
no crypto isakmp nat-traversal
telnet timeout 5
ssh timeout 5
console timeout 0
priority-queue outside
threat-detection basic-threatThis is what I get, looks like ASA does not reply. Why?
ciscoasa# sh capture cpi
5 packets captured
1: 05:20:14.494908 192.168.187.15 > 192.168.187.14: icmp: echo request
2: 05:20:19.526935 192.168.187.15 > 192.168.187.14: icmp: echo request
3: 05:20:25.026320 192.168.187.15 > 192.168.187.14: icmp: echo request
4: 05:20:30.525699 192.168.187.15 > 192.168.187.14: icmp: echo request
5: 05:20:36.025084 192.168.187.15 > 192.168.187.14: icmp: echo request -
Can not ping between remote vpn site ???
site A is l2l vpn, site B is network-extend vpn, both connect to same vpn device 5510 at central office and work well. I can ping from central office to both remote sites, But i can not ping between these two vpn sites ? Tried debug icmp, i can see the icmp from side A does reach central office but then disappeared! not sending to side B ?? Please help ...
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object-group network SITE-A
network-object 192.168.42.0 255.255.255.0
object-group network SITE-B
network-object 192.168.46.0 255.255.255.0
access-list OUTSIDE extended permit icmp any any
access-list HOLT-VPN-ACL extended permit ip object-group CBO-NET object-group SITE-A
nat (outside,outside) source static SITE-A SITE-A destination static SITE-B SITE-B
crypto map VPN-MAP 50 match address HOLT-VPN-ACL
crypto map VPN-MAP 50 set peer *.*.56.250
crypto map VPN-MAP 50 set ikev1 transform-set AES-256-SHA
crypto map VPN-MAP interface outside
group-policy REMOTE-NETEXTENSION internal
group-policy REMOTE-NETEXTENSION attributes
dns-server value *.*.*.*
vpn-idle-timeout none
vpn-tunnel-protocol ikev1
split-tunnel-policy tunnelspecified
split-tunnel-network-list value REMOTE-NET2
default-domain value *.org
nem enable
tunnel-group REMOTE-NETEXTENSION type remote-access
tunnel-group REMOTE-NETEXTENSION general-attributes
authentication-server-group (inside) LOCAL
default-group-policy REMOTE-NETEXTENSION
tunnel-group REMOTE-NETEXTENSION ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group *.*.56.250 type ipsec-l2l
tunnel-group *.*.56.250 ipsec-attributes
ikev1 pre-shared-key *****
ASA-5510# show route | include 192.168.42
S 192.168.42.0 255.255.255.0 [1/0] via *.*.80.1, outside
ASA-5510# show route | include 192.168.46
S 192.168.46.0 255.255.255.0 [1/0] via *.*.80.1, outside
ASA-5510#
Username : layson-ne Index : 10
Assigned IP : 192.168.46.0 Public IP : *.*.65.201
Protocol : IKEv1 IPsecOverNatT
License : Other VPN
Encryption : 3DES Hashing : SHA1
Bytes Tx : 11667685 Bytes Rx : 1604235
Group Policy : REMOTE-NETEXTENSION Tunnel Group : REMOTE-NETEXTENSION
Login Time : 08:19:12 EST Thu Feb 12 2015
Duration : 6h:53m:29s
Inactivity : 0h:00m:00s
NAC Result : Unknown
VLAN Mapping : N/A VLAN : none
ASA-5510# show vpn-sessiondb l2l
Session Type: LAN-to-LAN
Connection : *.*.56.250
Index : 6 IP Addr : *.*.56.250
Protocol : IKEv1 IPsec
Encryption : 3DES AES256 Hashing : SHA1
Bytes Tx : 2931026707 Bytes Rx : 256715895
Login Time : 02:02:41 EST Thu Feb 12 2015
Duration : 13h:10m:03sHi Rico,
You need to dynamic-nat (to available IP address) for both side for each remote subset to access the other remote side subnet and so they can access each other subnet as if both originating the traffic from your central location.
example:
Lets say this IP (10.10.10.254) is unused IP at central office, permitted to access remote tunnel "A" and site "B".
object-group network SITE-A
network-object 192.168.42.0 255.255.255.0
object-group network SITE-B
network-object 192.168.46.0 255.255.255.0
nat (outside,outside) source dynamic SITE-A 10.10.10.254 destination
static SITE-B SITE-B
nat (outside,outside) source dynamic SITE-B 10.10.10.254 destination
static SITE-A SITE-A
Hope this helps
Thanks
Rizwan Rafeek -
I have purchased Wedding Style By Miracle Design - it is showing in the downloads but I can not get it into lightroom - I am using a mac and the instructions are for windows.
Return, cancel, or exchange an Adobe order
-
Hi ...
I have a problem with my ipod touch:
I can not activate my ipod with my Apple ID, it tells me that my account can not activate this device, but my apple ID is OK.
The proposed me as ipod help entering previous credentials, but the ipod is mine from the beginning, in fact I have my ballot, not bought down to another user.
Actually I do not know how to activate it in Chile were unable Store MacOnline solve my problem, it is for this reason that I am writing to see if someone can help me.
PLEAAASEEE
Thank you.
SebastianThanks for your answer.
actually, my ipod will not let me activate it with apple id, this happened when the new iOS acutalizó understand that has more security, but do not know what to do. -
HT1454 why i can not get video out from my ipod touch after i did the upgrade
why i can not get video out from my ipod touch after i did the upgrade
why i can not get video out from my ipod touch after i did the upgrade
-
Why can not I install iTunes on Win 7 installation appears every time the next sunrise;
service, apple mobile device,
failed to start verify that you have sufficient privileges
to start system services
Please help meThe most complete instructions for resolving the issues with the new iTunes is in the user tip: https://discussions.apple.com/docs/DOC-6562
Maybe you are looking for
-
How to write a use time function in elsif
Hai All I have generated an attendance form and my problem is while i am using elsif insert operation there and there is no updation. My need is this is my table structure EMPCODE NUMBER EMPNAME VARCHAR2(25) BARCODE VARCHAR2(25) INTIME VARCHAR2(25) O
-
I have Adobe Acrobat 8 on a windows laptop. we have now purchased 2 MacBooks. I want to install Adobe on the new laptops but obviously the discs are for windows machines. I assume the upgrade purchase from 8 to XI is still available even though it go
-
Where to store a CSA, UL or CE File Number
We want to be able to store the CSA, UL or CE file number by material but cannot find a standard location on basic data views. We looked at using the EAN/UPC field - is there a best practice / better solution.
-
My iphone is from israel orange and it's locked and contact orange and they told me it's unlocked
i have an iphone4 bought from orange israel i've tried cellcom and pelephone but all of them give me no service and when i make airplane on give me invalid sim but the sims is already new , after that i've called organe support about the problem i, t
-
ML81n reversal of GR entry posted
Hi Experts, My client created a PO of value EUR100,000 and then made a service entry sheet of 36000. now while doing ML81n he choose PO and did the GR of total value EUR100,000, and then did IR of value EUR 100,000. Now since this was wrong, he rever