Can not post comment to a comment at FB

When I use iPad ( I bought about 2  months age)as my machine to open Face Book and I can do most of the normal functions as my iphone, but I can write comment to friends' comment but can not post. I can have my "status", "photo" only can not post comment, Why and how to make it work?

Thanks for the info.
Firstly, make sure you are not using the split keyboard. There is a bug in the app which disables the send button. Make sure it is the full keyboard you are using. (Pinch the split keyboard to rejoin it).
If you still have no luck, then use the website, or an alternative app. They are generally better than Facebook's own offering.
Let me know if this works, or if you have any other issues,
Nathan

Similar Messages

  • Can not post a comment on the natural news website

    Can not post or even see comments on the natural news website:i.e.
    http://www.naturalnews.com/036536_James_Holmes_shooting_false_flag.html
    Use any other browser and you can actaully see the posts and post if you want o.

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Video's are missing and can not post any video's and can no longer see on Facebook after upgrading mac software.  Facebook says content is unavailable.  Is this a facebook issue or is there something that I can do to fix on my mac.

    Video's are missing from facebook album under photo's.  It shows that I have 99 and only shows 24.  These are not copyright problems.  I have had them up for years.  Now, I can not post any video's  too.  Message says that content is currently unavailable. It seemed to happen after I upgraded to 10.7.5 but it could be coincidental.  Of course, I have not got any email from facebook to help with this problem and I am really frustrated that I can not find my video's and post any new ones anymore.  Any help would be appreciated.

    I would like to add that Comcast is my internet provider. Perhaps that is part of the issue although the Connection Doctor confirms the mail box is connecting to the internet. No other function processes when Connection Doctor program is used to find the source of the issue. I have read forum posts but am unable to find a way to get my Apple mail to be delivered to my computer. It worked fine up until I chose to transfer mail to the Cloud. My mail account is a .mac account.
    Still hoping someone out there can help me.
    thanks,
    anne

  • MIRO Error-Can not post to mat.account & using overhead cost centre &.

    Dear Colleagues,
    On MIRO,users have come across this error where they can not post to a particular G/L account using 2 different cost centres(219 & 220).
    We have some validations on OB28 but although one particular step menitons this message as I stated above,the prerequisite of that step seem to be referring to G/L IN VAL_Plant No_16 AND Cost Center IN VAL_Plant No_17.
    Whereabouts I need to maintain this G/L account/Cost Centre Combination?II had a look at OME9/OKB9 but couldn't get any resolution looking over there...
    All Help appreciated.
    PAPJ1.

    I had to tweak the types  of error messages on OB28 temporarily,to allow for these postings to go through and it worked!.
    PAPJ1

  • You can not post to asset xyz ( investment support measure) ??

    Hi Guru's,
    I am trying to post some spending reclassed to an already capitalized asset. So in order to do this I have reactivated the project, resettled the spending to the asset and now I am trying to finalize the settlement to the asset by using tcode: CJIC... but keep getting this a hard error message:
    You can not post to asset xyz ( investment support measure) .....
    Any idea how I can resolve this ?
    Please help !! Thank You
    Best Regards,
    Yasmeen

    hi,
    it would be better if you write error message number in thread.
    hope you are using im module. if so check the system stastus of appr.request and try to settle to auc.
    check and do revert.
    regards,

  • CO11N can not post the backflush material properly

    Dear Gurus,
    When I use CO11N to post a Backflush material, the system returns error logs " No stock posting possible for this material".  Aside the warning and confirm straghtly, then I use COGI to post this error backflush material, It post successfully without any warnning message.
    (PS: I have checked my material type in OMS2, the parameter was right. And I can use MIGO_561 to post this material.)
    Why the CO11N can not post the backflush material properly, and then can be COGI properly ?
    Thanks in advance for your kindly help.
    BRGs
    Sivan

    Sivan,
    This is due to missing entry in a customisation table T158.
    Call Transaction SM30.Enter view 'V_158_ALL' for field 'Table/view'.Consider the entry for Transaction CO11 as a template and adjust the entry for Transaction CO11N correspondingly so that both entries are identical.Afterwards table T158 must be transported from the Customizing client into the other clients.
    Regards,
    Prasobh

  • Why third-party  billing  can not  post to accounting

    dear ,when i  was  processing  third-party order  process ,all  step  is ok   ,s/o->p/r->p/o-migo->miro->billing
    but  billing  is open ,can not  post to accouting  ,the error message is:
    Document 90000043 saved (no accounting document generated),  someone  please  let  me  out ,thanks a lot  ahead .

    Please do the checking step by step, maybe it will help in resolving the issue:
    1. Check Account Assignment Group of Customer, whether it is maintained or not in Customer Master. It is ideally required for T.Code: VKOA assignment.
    2. Check Account Assignment Group of Material, whether it is maintained or not in Master Master. It is ideally required for T.Code: VKOA assignment.
    3. Check the Account Keys maintained in Pricing Procedure T.Code: V/08, which is being called in transaction.Account Key is a must & integration factor between SD & FI.
    4. Now Check the T.Code: VKOA assignment. Incase it is maintained with Condition type KOFI, try it also by maintaining for KOFK & check the result.
    For Tax Condition check if G/L account is maintained based on Tax Code for Transaction Key (same as Account Key on T.Code: OB40.
    Also Check if the error message is for Foreign Data Incomplete.
    While releasing inland sale commercial document / invoice to accounting, an error is confronted – Foreign Trade Data incomplete.
    Solution:
    Reference note – 34222
    a.     Transaction VOFM – Data transfer – Billing Documents
    Copy Routine number 001 as 601. Apply code corrections as per note 354222.
    FORM DATEN_KOPIEREN_601.
    *{   INSERT         P3DK900617                                        1
    Header data
    VBRK-xxxxx = ............
    Prüfen Exportvorgang
      IF VBRK-LANDTX = VBRK-LAND1.
        CLEAR: VBRK-EXPKZ,
               VBRK-EXNUM.
      ENDIF.
    Item data
    VBRP-xxxxx = ............
    Additional split criteria
      DATA: BEGIN OF ZUK,
              MODUL(3) VALUE '001',
              VTWEG LIKE VBAK-VTWEG,
              SPART LIKE VBAK-SPART,
            END OF ZUK.
      ZUK-SPART = VBAK-SPART.
      ZUK-VTWEG = VBAK-VTWEG.
      VBRK-ZUKRI = ZUK.
    *}   INSERT
    ENDFORM.
    b.     Transaction code – VTFL (Copy control – Delivery to Billing).Select the relevant delivery and billing document types. Go to item level and select the relevant item category (e.g.TAN).
    Insert the routine 601 in ‘Data VBRK/VBRP’.
    In case, one has already created billing documents, pl. refer to note 354222.
    Hope the above is helpful.
    Regards,
    Rajesh Banka

  • My iTunes in MacBook is not working i do received error You can not post a blank message. Please type your message and try again. saying I don't  have  permission to media folder could help me

    You can not post a blank message. Please type your message and try again.

    some additional info about the clean install, I did not Migrate any data over from a Time Machine, I started fresh. Perhaps this could be my issue. Do I need to Migrate over the User account in order to have access to my old data?

  • Activity can not post when do confirmation

    Dear Gurus!
          I have an issue now, when I do confirmation for production order. But some order can post actvity(in CO03 -> Cost analisys -> Activity actual) but some can not.
    Do I miss any steps? I use BAPI to create comfirmation.
    Regards,
    Tony

    It is hard to guess some reason, you should carry out some comparative study between the production orders that are displaying this different behaviour. There are many factors to be considered....
    1) The production orders are for the same material or different materials? If different, then check routings....
    2) Use the same work centers or activity types....
    3) Belongs to the same cost center ?
    4) the operation is really confirmed but no values for activities ( chack if the problem is quantity , i.e. hours, or currency, based on the price od each activity type)
    5) Check prices for activities in KP27....
    and so on...

  • Can not post to Face Book after update

    keeps telling me an Error has ocured and will not post/share/like

    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
    * On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    [[Image:FirefoxSafeMode|width=520]]
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    Please report back soon.

  • MSI Z97-G45 Gaming can not POST or enter BIOS but has display

    Hi
    First post here and sadly a technical one. I just bought the following hardware:
    - MSI Z97-G45 GAMING MoBo (no idea on BIOS since I cannot enter it at all)
    - Intel Core i5 4690K s1150
    - 16GB (2x8GB) Patriot Viper 3 Black Mamba 1600MHz CL9 DDR3 Dual/Quad Channel Kit [PV316G160C9K]
    - Corsair CX750M PSU
    and installed the hardware with the following old hardware that I am carrying over:
    - 2 X Hitachi 1TB Sata HDD
    - 2 X GTX 275 SLI
    To begin with, my existing drives were setup as RAID 0 and has a installed Windows 7 64-bit on there already. I unregistered the Product key before taking it all apart with the idea of registering it again once the new hardware was all together.
    So basically, when I received all the new parts yesterday and put them all in. Upon powering on, I see the MSI Dragon logo fullscreen with the option to press DEL or F11. I let it continue without pressing any key to see how it goes. After the dergaon logo, all I get is "Missing Operating System" at the top which did not really worry me and I assumed it would be realted to the Raid not setup (right?)
    So I rebooted the PC and decided to press DEL to enter BIOS. However, every time I want to enter the BIOS the screen turns black! The display is still functional though from what I can tell (the display does not lose signal).
    Following that, I reset the CMOS from behind by pressing the button with a pen tip. Starting the PC again now gives me a display of all my hardware that it detected (correct CPU, Correct amount of ram, correct HDD etc...). It also gives me two options... F1 to Enter setup or F2 to Continue. Pressing F1 displays the text "Entering Setup..." at the bottom but again it fails to enter the BIOS (it freezes on the above screen - does not turn black this time) and choosing F2 to Continue freezes as well.
    I have tried to boot up with the following changes:
    - No GPU and use on board VGA only
    - One stick of ram in multiple slots
    - No HDDs connected at all
    - I've checked the CPU to make sure no bent pins
    - Reconnected the PSU cables into the motherboard
    I should also mention that when I test it on the bare minimum (CPU, PSU, 1 stick of ram) I get A9 in the lower corner before the dragon logo appears.
    Right now I am out of ideas and any suggestions would be helpful or at least some insight in what problems I described may indicate. Thanks!

    Quote from: Bernhard on 08-July-14, 19:43:46
    Can you post your board's serial number. This contains the manufacture date. From that one could deduce the BIOS version on that board.
    As for the windows installation from your previous system, you would be very lucky if you were able to boot with that. Perhaps force safe mode if and when you are able to boot, and then try installing the new drivers. The problem is that with the old drivers still in the boot menu, you are probably heading down a slippery slope trying to re-use it. A clean installation would be advised.
    Whatever is on the HDD now should however not prevent you from getting into the BIOS.
    The fact that your CPU is recognised by its make doesn't mean that its supported. The CPU ID is probably read by the BIOS, but the microcode of the CPU may be missing in the BIOS support. I am trying to think of possible reasons here, and these are just some of my current ideas as to why you may not be able to get into the BIOS.
    Have you tried your MB outside the case yet, i.e. on a non conductive surface, i.e. wood or cardboard to eliminate any chances of a potential short?
    Also, you may want to check your CPU seating again and carefully inspect the CPU socket pins to ensure that none were bent or are not making proper contact
    Yep here is the serial number: 601-7821-050B1405415963
    Yeah I didn't really expect to have too much luck with the original windows 7 installation but I had no choice since my last computer failed to power on (faulty PSU I suspected).
    However, as you also mentioned, I do not think it would prevent me from reaching the BIOS setup.
    Hopefully the above serial can make some sense for you but I do recall some sort of date after a CMOS reset at the top... I think it was 21 April or May 2014 or so. This was next to the following: E7821IMS v2.0.
    Once I get home, I will try a few things like you suggested but trying to get as much info as I can before I get home so I have a few things to try.
    Thanks again!
    EDIT - as a side note, I also contacted the Online Retailer I got it from and the first response from them was that the DEBUG "A9" code meant it was the RAM not fully inserted. That is another thing I have to be 100% sure of but I am fairly sure it was fully clicked in on both sides... but you never know!

  • I can not post

    Hallo,
    Can you help me how to post a question because i can not see the post icon even if i am a user. Also if from here can help me , i have a serious problem. I lost 2 files in system32 and i can not boot my portege M100. I want to reinstall or whatever to fix it. I don't have any recovery disk. Thes i386 is on the c: disk but i can not do anything.

    Hi,
    did you tried to boot the "safe mode with command prompt" of windowsxp ( Press F8 at the boot up process ) ?
    If this works you can work in the Dos Command Box, to reinstall it.
    Also you could try it with a bootable disk (like Startup Disc of Windows 98 for example).
    This works only if you have an Floppy of course and the Partition is formatted in FAT.
    With NTFS Filesystem it doesn't works!
    keep me posted !
    bye

  • Interface   BAPI  can not post to asset

    Dear all
            i met a weird problem.
            we use a interface( bapi)  to make the SAP document, but when  we post document  for the asset ,
    only FI document generated.  the Asset document not generated ,  the value was not posted to the asset.
            if anybody has met this kind of problem?   help .......help.......Thanks a lot !

    Dear
          yes ,we have fill in the transaction type (100 - acquisiton) , and the FI document has been generated
    all the fields are right ! the only problem is  the asset value not updated ,it's that the asset document not generated!
    and it 's not for a particular company code ,for all the company code!
    Best Regards!:)
    Sara xie

  • Can not "post goods issue" against Vendor Return PO.

    Hello Friends,
    **I have a problem During the "Vendor Return Through Purchase Order" Process.I crated a PO with return flag set.**
    **Then  1) Created a outbound delivery against purchase order (VL10B)**
              2) Created a Billing (VF01)**
              3) Next is VL02N - While doing the "post goods issue" where i got following error  message "Update control of movement type is incorrect (entry 161 X X _ L)"**
    Its shows setting related to Mvt 161 to update .I check allowed transaction with respect to 161....VL02N is there .....But don't understand what change needed in "Update control /WM movement type is needed.....Pls suggest any solution........Thanx**
    Regards
    Sachin
    *Error Messafe -
    Update control of movement type is incorrect (entry 161 X X _ L)
    Message no. M7226
    Diagnosis
    The system could not find entry 161 X X _ L in any of the movement type control tables.
    Procedure
    Cancel current processing.
    Contact your system administrator.
    Action to be taken by the system administrator
    Check in Customizing for Inventory Management under Copy, Change Movement Types whether the entry is contained in the Update control view for the movement type.
    If the entry is missing, proceed as follows:
    For standard movement types, this means that the given process is not supported using the present data combination. Do not create any entries without prior arrangement with your SAP consultant. Otherwise, incorrect postings may result.
    For customer-defined movement types (beginning with 9, X, Y, or Z), this may mean that they have not been fully defined. Delete the movement type and re-create it by copying a standard movement type.

    Hi Antony,
    Thanx for reply.
    1) I had assign  delivery Type (RL -Returns Purchase order) to my document type. Assingnment of delivery type thru
    spro>MM->purchasing>purchase order->set up stock transport order--->assign delivery type and checking rule....
    2) MvT - 161----If i modify 161 wrt to  GR Returns what modification is needed ? ......
    3) VOV6 - I had checked it ,maintain it, but that is not relavant in my case....
    4) During PGI system pick 161 as defalult MvT.....can we change it t0 122 ? but how...??
    still the problem is there......
    Sachin

  • Can not post MIRO due to production order archived

    Hi,
    We have created production order and with production order as account assignment we have created purchase requisition.
    We have converted purchase requisition to purchase order and goods receipt posted.
    Now production order is archived (TECO done, setteled manually, deletion and as per residence time ) and we are not able to post invoice receipt for PO.
    The question is, how production order archived, is there any check that purchase orders, purchase requisition are open in which this production order is used.
    We can post MIRO with CO substituation, but wants to check settings, pre conditions.
    Thanks
    Sudhir

    Hi Thyagarajan
    I checked the operations in the PM-order. There are two external processing operations. One has an aggrement which has the validity end 2005-12-31. I don`t see where to see if the other operation is assigned to a purchasing document. In the menu path, extras, cost reports there is a PO which was already invoiced and GR-posted.
    I don`t know where to look for more if there are any open purchasing documents?
    Thanks.
    Esra

Maybe you are looking for