Can not post to Support forum.

I have been trying to post a question on the Logic Pro side but I keep getting a prohibitory sign up not letting me post.
Any Ideas why?
Thanks.

We need to know the " prohibitory sign "
Start again
Take screenshot when " it " happens
post the image here with the camera tool
buenos tardes
ÇÇÇ

Similar Messages

  • You can not post to asset xyz ( investment support measure) ??

    Hi Guru's,
    I am trying to post some spending reclassed to an already capitalized asset. So in order to do this I have reactivated the project, resettled the spending to the asset and now I am trying to finalize the settlement to the asset by using tcode: CJIC... but keep getting this a hard error message:
    You can not post to asset xyz ( investment support measure) .....
    Any idea how I can resolve this ?
    Please help !! Thank You
    Best Regards,
    Yasmeen

    hi,
    it would be better if you write error message number in thread.
    hope you are using im module. if so check the system stastus of appr.request and try to settle to auc.
    check and do revert.
    regards,

  • Video's are missing and can not post any video's and can no longer see on Facebook after upgrading mac software.  Facebook says content is unavailable.  Is this a facebook issue or is there something that I can do to fix on my mac.

    Video's are missing from facebook album under photo's.  It shows that I have 99 and only shows 24.  These are not copyright problems.  I have had them up for years.  Now, I can not post any video's  too.  Message says that content is currently unavailable. It seemed to happen after I upgraded to 10.7.5 but it could be coincidental.  Of course, I have not got any email from facebook to help with this problem and I am really frustrated that I can not find my video's and post any new ones anymore.  Any help would be appreciated.

    I would like to add that Comcast is my internet provider. Perhaps that is part of the issue although the Connection Doctor confirms the mail box is connecting to the internet. No other function processes when Connection Doctor program is used to find the source of the issue. I have read forum posts but am unable to find a way to get my Apple mail to be delivered to my computer. It worked fine up until I chose to transfer mail to the Cloud. My mail account is a .mac account.
    Still hoping someone out there can help me.
    thanks,
    anne

  • Can not post a comment on the natural news website

    Can not post or even see comments on the natural news website:i.e.
    http://www.naturalnews.com/036536_James_Holmes_shooting_false_flag.html
    Use any other browser and you can actaully see the posts and post if you want o.

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Setup can not find a supported product...*I SERIOUSLY NEED HELP* SB-XFI

    WinXp System
    I've posted here before and no ones been able to help me with a solution..but this problem keeps occuring when I restart randomly when I get back to windows there will be no sound.
    Here's the procedure I follow which works (randomly) after 2 or 3 hours of doing this over & over & over & over again..
    Upon the sound not working I..
    1: Add/Remove programs-uninstall creative drivers
    2: Launch Driver sweeper (Guru3d) select Creative-Sound..****yse. Remove any entrys it finds.
    3: Open the setup for the SBXFI drivers (the ONLY one that will work for me) .0.0. Created /30/2009
    then Driver Uninstallation> Delete all shared Creative Audio Driver files
    4: restart and clean boot back into windows.
    5: I re-open that driver setup file and do -Driver Installation. Now most of the time it will run..wait a little bit then tell me to restart. This means it WILL NOT WORK. I know when its gonna work because it will pop up a windows caution box saying that the driver is unsigned and do I wanna continue.. I click yes and thats a sign it'll work..but that only happens after HOURS of doing this procedure..if Im lucky.
    Tonight Im on hour 2 of this rubbish and Im absolutely sick of it..can someone provide a fool proof way to make these **bleep** drivers work?!? I've tried to run almost all the other drivers out there and if I attempt that I get the "Setup can not find a supported product..." for some reason this driver Im using is the only one that works..sometimes..
    Message Edited by Wildone_06 on 05-06-2009 0:0 PM

    Thanks, its [size="" face="Arial">Sound Blaster? X-Fi? XtremeMusic.
    I got it working again around 0pm last night, after doing that procedure since 7pm. Now if its the wrong driver, it would never work..if its the right driver..it should work first time. So I have no idea why I have do this ritual and it'll eventually work after so many trys..is this software vodoo based or something!?
    The OEM drivers that came with it certainly dont work (The 'setup can not find ect ect) so its a mystery to me.

  • MIRO Error-Can not post to mat.account & using overhead cost centre &.

    Dear Colleagues,
    On MIRO,users have come across this error where they can not post to a particular G/L account using 2 different cost centres(219 & 220).
    We have some validations on OB28 but although one particular step menitons this message as I stated above,the prerequisite of that step seem to be referring to G/L IN VAL_Plant No_16 AND Cost Center IN VAL_Plant No_17.
    Whereabouts I need to maintain this G/L account/Cost Centre Combination?II had a look at OME9/OKB9 but couldn't get any resolution looking over there...
    All Help appreciated.
    PAPJ1.

    I had to tweak the types  of error messages on OB28 temporarily,to allow for these postings to go through and it worked!.
    PAPJ1

  • CO11N can not post the backflush material properly

    Dear Gurus,
    When I use CO11N to post a Backflush material, the system returns error logs " No stock posting possible for this material".  Aside the warning and confirm straghtly, then I use COGI to post this error backflush material, It post successfully without any warnning message.
    (PS: I have checked my material type in OMS2, the parameter was right. And I can use MIGO_561 to post this material.)
    Why the CO11N can not post the backflush material properly, and then can be COGI properly ?
    Thanks in advance for your kindly help.
    BRGs
    Sivan

    Sivan,
    This is due to missing entry in a customisation table T158.
    Call Transaction SM30.Enter view 'V_158_ALL' for field 'Table/view'.Consider the entry for Transaction CO11 as a template and adjust the entry for Transaction CO11N correspondingly so that both entries are identical.Afterwards table T158 must be transported from the Customizing client into the other clients.
    Regards,
    Prasobh

  • Why third-party  billing  can not  post to accounting

    dear ,when i  was  processing  third-party order  process ,all  step  is ok   ,s/o->p/r->p/o-migo->miro->billing
    but  billing  is open ,can not  post to accouting  ,the error message is:
    Document 90000043 saved (no accounting document generated),  someone  please  let  me  out ,thanks a lot  ahead .

    Please do the checking step by step, maybe it will help in resolving the issue:
    1. Check Account Assignment Group of Customer, whether it is maintained or not in Customer Master. It is ideally required for T.Code: VKOA assignment.
    2. Check Account Assignment Group of Material, whether it is maintained or not in Master Master. It is ideally required for T.Code: VKOA assignment.
    3. Check the Account Keys maintained in Pricing Procedure T.Code: V/08, which is being called in transaction.Account Key is a must & integration factor between SD & FI.
    4. Now Check the T.Code: VKOA assignment. Incase it is maintained with Condition type KOFI, try it also by maintaining for KOFK & check the result.
    For Tax Condition check if G/L account is maintained based on Tax Code for Transaction Key (same as Account Key on T.Code: OB40.
    Also Check if the error message is for Foreign Data Incomplete.
    While releasing inland sale commercial document / invoice to accounting, an error is confronted – Foreign Trade Data incomplete.
    Solution:
    Reference note – 34222
    a.     Transaction VOFM – Data transfer – Billing Documents
    Copy Routine number 001 as 601. Apply code corrections as per note 354222.
    FORM DATEN_KOPIEREN_601.
    *{   INSERT         P3DK900617                                        1
    Header data
    VBRK-xxxxx = ............
    Prüfen Exportvorgang
      IF VBRK-LANDTX = VBRK-LAND1.
        CLEAR: VBRK-EXPKZ,
               VBRK-EXNUM.
      ENDIF.
    Item data
    VBRP-xxxxx = ............
    Additional split criteria
      DATA: BEGIN OF ZUK,
              MODUL(3) VALUE '001',
              VTWEG LIKE VBAK-VTWEG,
              SPART LIKE VBAK-SPART,
            END OF ZUK.
      ZUK-SPART = VBAK-SPART.
      ZUK-VTWEG = VBAK-VTWEG.
      VBRK-ZUKRI = ZUK.
    *}   INSERT
    ENDFORM.
    b.     Transaction code – VTFL (Copy control – Delivery to Billing).Select the relevant delivery and billing document types. Go to item level and select the relevant item category (e.g.TAN).
    Insert the routine 601 in ‘Data VBRK/VBRP’.
    In case, one has already created billing documents, pl. refer to note 354222.
    Hope the above is helpful.
    Regards,
    Rajesh Banka

  • Can not post comment to a comment at FB

    When I use iPad ( I bought about 2  months age)as my machine to open Face Book and I can do most of the normal functions as my iphone, but I can write comment to friends' comment but can not post. I can have my "status", "photo" only can not post comment, Why and how to make it work?

    Thanks for the info.
    Firstly, make sure you are not using the split keyboard. There is a bug in the app which disables the send button. Make sure it is the full keyboard you are using. (Pinch the split keyboard to rejoin it).
    If you still have no luck, then use the website, or an alternative app. They are generally better than Facebook's own offering.
    Let me know if this works, or if you have any other issues,
    Nathan

  • My iTunes in MacBook is not working i do received error You can not post a blank message. Please type your message and try again. saying I don't  have  permission to media folder could help me

    You can not post a blank message. Please type your message and try again.

    some additional info about the clean install, I did not Migrate any data over from a Time Machine, I started fresh. Perhaps this could be my issue. Do I need to Migrate over the User account in order to have access to my old data?

  • Setup can not find a supported product

    &Setup can not find a supported product3 I have an XFi XtremeGamer and I tried to update the console launcher and received the error that setup could not find a supported product. I have had this machine for 2 years on XP, and I used the autoupdate feature on the website. This feature found the device on my machine and listed a few updates including the console launcher. I would think if there was a problem, the autoupdate would issue some kind of error. I was able to update the driver on 2/7/08 without any problems using the autoupdate with the website, and I did install the wave studio suite yesterday with autoupdate without issues too. I have made no hardware changes to this machine. Device Manager lists the device as working properly. I do have sound from the card. I tried to download the launcher.exe package with the same result. It would seem that I would have had more issues if the card wasn't installed correctly including the?autoupdate feature not?working and not finding the card and other autoupdate software packages not installing correctly.
    Any ideas? Thanks.

    [color="#000000"]The Creative Console Launcher 2.60.35 update does not work for my X-Fi XtremeMusic soundcard with Vista 64-Bit OS.
    Edit:
    Either going through the creative autoupdate or downloading the file manually and trying to install this update, I get this message below. Yes, I have went to the right download webpage for my soundcard and operating system.
    My Soundcard : X-Fi XtremeMusic SB0460
    My Operating System : Vista 64-Bit
    [color="#ff0000"]"Setup is unable to detect a supported product on your system. Please
    ensure that your product is properly installed before running this
    setup program".
    [color="#ff0000"]?
    [color="#000000"]?=======
    [color="#ff0000"]?
    <div class="DownloadFileName">File Name : CSL_PCAPP_LB_2_60_35.exe<div class="DownloadText">This download contains?the Creative Console Launcher application. For more information, read the rest of this web release note. This download supports the following audio devices only:
    Sound Blaster? X-Fi? XtremeMusic<
    Sound Blaster X-Fi XtremeGamer<
    Sound Blaster X-Fi Platinum<
    Sound Blaster X-Fi Fatalty?<
    Sound Blaster X-Fi Elite Pro<
    Sound Blaster X-Fi<
    Sound Blaster X-Fi Surround 5. <
    USB Sound Blaster X-Fi Xtreme Audio?Karaoke<
    Fixes:
    Rectifies the output delay when using line-in/microphone monitoring.<<font face="Tms Rmn">?<font face="Helv" size="2">?
    Requirements:
    Microsoft? Windows Vista? 32-bit or 64-bit, Windows? XP Professional x64 Edition or Windows XP Service Pack 2 (SP2)<
    Creative Sound Blaster?audio devices listed above<
    [color="#ff0000"]?
    Message Edited by freesky on 0-02-2009 0:28 PM

  • Why can I not find the support forums??

    I thought mozilla firefox was superior for a long time until today. It may still be the best browser but this website is unacceptable. I mean how do you expect people to find the support forums. The is no link, no nothing on the mozilla support home page. I mean all I wanted to do was go and find my question in the support forums, sure I can go to my profile and find my question from there, but i should be able to navigate to the forums and my question without having to go through the idiotic process you people have laid forth. Unless you guys can provide a reasonable explanation for your thinking then you really need to make a link to the support forums on at least the SUPPORT HOME PAGE. I mean for real it is the SUPPORT HOME PAGE after all, i cannot stress that enough.

    On https://support.mozilla.org look at top for Contributor Tools in which it lists "Support Forum Home" among other things.
    When you are on support.mozilla.org/questions you can click on "My contributions" near top. You may want to select All questions to make sure all of your posts are listed with most recent activity threads being listed first.

  • Can't access Aperture support forum

    Hi all, not sure whether this is the right place to report a problem with the Aperture Support forum - I couldn't find anywhere to report the problem so posted here. When I try to enter it I get the following error message
    "Unsupported Browser detected.
    Announcement: Apple Support Communities has discontinued support for your current browser.
    In order to provide the best platform for continued innovation, Apple Support Communities suggests using the latest version of Safari."
    I am using Safari Version 7.1 (9537.85.10.17.1) and I can access the other forums without any problem.
    Thanks in advance

    I just got this too, on Firefox, in Private Browsing mode. I was trying to access How to remove Adware? when it redirected to the same page as fleetwood reported. I've attached a screenshot. I'm using Firefox 33.0 on Mavericks 10.9.5. I'm not sure if this is the right forum for this either.
    UPDATE: The link works fine now.

  • Can't post pics on forum with firefox but can with Internet explorer

    I can't post pictures/images on a certain forum when using firefox but when using Internet explorer on the same forum it works. Any solutions please?

    Hi Meghraj, Thank you for your reply! I am afraid a screenshot will not reveal much. When I click on "add file" on the forum to post a pic it opens my files and once I select my file that I want to post and click on "open" it goes back to the forum page but the file is not there. When I do this same action with Internet explorer it works. But I don't really use internet explorer and would like to use firefox rather. A few members on the forum using firefox have the exact same problem. Any ideas? Thank you! :)

  • MSI Z97-G45 Gaming can not POST or enter BIOS but has display

    Hi
    First post here and sadly a technical one. I just bought the following hardware:
    - MSI Z97-G45 GAMING MoBo (no idea on BIOS since I cannot enter it at all)
    - Intel Core i5 4690K s1150
    - 16GB (2x8GB) Patriot Viper 3 Black Mamba 1600MHz CL9 DDR3 Dual/Quad Channel Kit [PV316G160C9K]
    - Corsair CX750M PSU
    and installed the hardware with the following old hardware that I am carrying over:
    - 2 X Hitachi 1TB Sata HDD
    - 2 X GTX 275 SLI
    To begin with, my existing drives were setup as RAID 0 and has a installed Windows 7 64-bit on there already. I unregistered the Product key before taking it all apart with the idea of registering it again once the new hardware was all together.
    So basically, when I received all the new parts yesterday and put them all in. Upon powering on, I see the MSI Dragon logo fullscreen with the option to press DEL or F11. I let it continue without pressing any key to see how it goes. After the dergaon logo, all I get is "Missing Operating System" at the top which did not really worry me and I assumed it would be realted to the Raid not setup (right?)
    So I rebooted the PC and decided to press DEL to enter BIOS. However, every time I want to enter the BIOS the screen turns black! The display is still functional though from what I can tell (the display does not lose signal).
    Following that, I reset the CMOS from behind by pressing the button with a pen tip. Starting the PC again now gives me a display of all my hardware that it detected (correct CPU, Correct amount of ram, correct HDD etc...). It also gives me two options... F1 to Enter setup or F2 to Continue. Pressing F1 displays the text "Entering Setup..." at the bottom but again it fails to enter the BIOS (it freezes on the above screen - does not turn black this time) and choosing F2 to Continue freezes as well.
    I have tried to boot up with the following changes:
    - No GPU and use on board VGA only
    - One stick of ram in multiple slots
    - No HDDs connected at all
    - I've checked the CPU to make sure no bent pins
    - Reconnected the PSU cables into the motherboard
    I should also mention that when I test it on the bare minimum (CPU, PSU, 1 stick of ram) I get A9 in the lower corner before the dragon logo appears.
    Right now I am out of ideas and any suggestions would be helpful or at least some insight in what problems I described may indicate. Thanks!

    Quote from: Bernhard on 08-July-14, 19:43:46
    Can you post your board's serial number. This contains the manufacture date. From that one could deduce the BIOS version on that board.
    As for the windows installation from your previous system, you would be very lucky if you were able to boot with that. Perhaps force safe mode if and when you are able to boot, and then try installing the new drivers. The problem is that with the old drivers still in the boot menu, you are probably heading down a slippery slope trying to re-use it. A clean installation would be advised.
    Whatever is on the HDD now should however not prevent you from getting into the BIOS.
    The fact that your CPU is recognised by its make doesn't mean that its supported. The CPU ID is probably read by the BIOS, but the microcode of the CPU may be missing in the BIOS support. I am trying to think of possible reasons here, and these are just some of my current ideas as to why you may not be able to get into the BIOS.
    Have you tried your MB outside the case yet, i.e. on a non conductive surface, i.e. wood or cardboard to eliminate any chances of a potential short?
    Also, you may want to check your CPU seating again and carefully inspect the CPU socket pins to ensure that none were bent or are not making proper contact
    Yep here is the serial number: 601-7821-050B1405415963
    Yeah I didn't really expect to have too much luck with the original windows 7 installation but I had no choice since my last computer failed to power on (faulty PSU I suspected).
    However, as you also mentioned, I do not think it would prevent me from reaching the BIOS setup.
    Hopefully the above serial can make some sense for you but I do recall some sort of date after a CMOS reset at the top... I think it was 21 April or May 2014 or so. This was next to the following: E7821IMS v2.0.
    Once I get home, I will try a few things like you suggested but trying to get as much info as I can before I get home so I have a few things to try.
    Thanks again!
    EDIT - as a side note, I also contacted the Online Retailer I got it from and the first response from them was that the DEBUG "A9" code meant it was the RAM not fully inserted. That is another thing I have to be 100% sure of but I am fairly sure it was fully clicked in on both sides... but you never know!

Maybe you are looking for