Can not preview HTML pages in browser
I am unable to preview my HTML pages in a browser eg. safari. firefox etc... before uploading them to my server. I have tried going into preferences and clicking on the preview in browser section and adding a new primary and secondary browser but it will not work. I was able to preview my pages in browser mode fine up until a few days ago when it suddenly stopped working. I am using Mac OS X version 10.5.8, Prosessor 4x2.5 GHz PowerPC G5. Memory 4.5 GB DDR2 SDRAM. I have Dreamweaver CS3. My test server is set to none.
Hi Murry,
When I try to preview HTML pages in browser it comes up with a message saying 'Would you like to define a primary browser now?' but when i try this it does not work, it will not recognise the browsers when i add them to the list.
Corinne
Similar Messages
-
Preview can not find linked pages
When previewing my index page I click on the links created
using flash buttons and they can not find the pages on my hard
drive. The flash buttons are incorporated into my basic template as
a library item. When The error occurs the page address that is
being looked for is shown as follows:
file:///C:/KECSITE2/kecpartyfiles/Moonwalk-Bouncehouse-rental-Massachusetts-Connecticut/bo uncers_moonwalks.html
If I click on the same link while previewing other pages ,
the page is found and the address is as follows:
file:///C:/KECSITE2/kecpartyfiles/KECPARTY%20SITE%20FILES/Moonwalk-Bouncehouse-rental-Mass achusetts-Connecticut/bouncers_moonwalks.html
the page is displayed.
all the regular html links work when previewing on all pages
and there are no broken links found when I check links site wide.
and the links both flash and html all work when published. This
only started when I added the flash buttons as links.
Is it possible I changed the way the preview works?suggestion one:
Go into dreamweaver Preferences->Preview in Browser
put a checkmark in "use temp files for preview"
Suggestion Two: Do Not Use Flash Buttons.
Just don't
there are ten possible reasons this isn't working. If you
just used text
links to the other pages, there wouldn't only be two possible
reasons it
isn't working.
again- suggest you don't use Flash Buttons or Flash Text.
There's a reason adobe finally listened to us and removed
Flash Text and
Flash Buttons from CS4.
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/ -
Preview master page in browser
I have a custom master page created in Sharepoint Designer. How can I preview this in a browser?
What URL do I use to preview the v4.master page in a browser?
thanks!Hello,
Just try to apply this thread suggestion. I am not able to reproduce this issue.
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/f6fd2b22-1d3f-4b52-b780-c5ea63b244b2/sharepoint-designer-2010-all-editing-buttons-are-greyed-out-design-view-is-not-available?forum=sharepointcustomizationprevious
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help -
Hi to the Mac Folks,
I have 10.6.8 and have installed two new printers HP 8610 and an Epson 7880 and can not find the Page Set-up menu anywhere in the applications I a trying to print from. This is regardless of either printer selected.
I primarily print photos from Photoshop CS5. The term Page Set-up has gone missing in the file pull down menu. Can't make any choices There are no page sizes, paper types, appearsto be locked on a 13x19 size paper format. Either being too large or too small.
Saw a 2008 locked issue about this however none of the help fit my situation, options discussed are not available to me.
Preview has no "Page Setup" - or does it?
Does the constant struggle with computer compatability weirdness issues ever end or is it a enslavement scheme?
WoodyHey,
if you know the name(s) of the root folder(s) you want to access (eg. by making a note on the Windows side) then you can make them appear by just doing Shift-Command-G in Finder ("Go to Folder…"), and entering the full path to the required folders. You can then navigate all the contents as normal.
HTH,
S. -
I can not print web pages,print box does not appear . I can print web pages using IE
Windows 7. Firefox 5.0 I can not print web pages. After clicking PRINT the print dialog box does not appear and nothing prints. I do not have this problem using IE
Printer: Brothers HL-5140
Thank you,
SydFirst of all, update Firefox to 3.6.17 via Help | Check For Updates.
There was a security breach at Comodo which is an SSL certificate provider recently whereby a number of fraudulent certificates were inadvertently issued. These allow a hacker to impersonate any site including online banking and the Firefox version you're running at the moment will not warn you that the site is a fake. The fraudulent certificates were blacklisted in v3.6.17 and beyond.
To uninstall the Yahoo Toolbar, go to Tools | Add-ons | Extensions. You should find it in there.
To revert to Google as your preferred search engine, please do the following.
* In the location bar, type '''about:config''' and hit Enter.
* In the filter at the top, type: '''keyword.URL'''
* Double click it and remove whatever's in there and replace it with http://www.google.com/search?q=
The URL to add in "keyword.URL" becomes a link in this post, so right click it and choose "Copy Link Location" to copy it to the Windows clipboard. Then hit CTRL+V to paste it. Saves you having to type the whole thing.
'''To reset your home page, do the following'''.
* Go to the site you want to set as your homepage.
* Go to '''Tools '''| '''Options '''| '''General'''
* Make sure it says "''Show My Homepage''" in the first dropdown menu.
* Click the button called "'''Use Current Pages'''" to set the homepage to the one you have on the screen.
After you complete the above steps, install this add-on to prevent another search engine from modifying your preferences: https://addons.mozilla.org/en-US/firefox/addon/browserprotect/
Additonal security risks on your system are the version of Flash you have installed at the moment. See http://www.adobe.com/support/security/bulletins/apsb11-12.html
Update via http://get.adobe.com/flashplayer/
Printing issues might be fixed by installing Java via http://www.java.com/en/
But if the problem persists, please post again. -
Can not open file in web browser
Hi,
in 8.49 tools FSCM90 on Win
I run a AE_MINITEST and it succeed but when click on log file I have the message Internet Explorer can not display this page.
That logfile exists physically (size 1kb) on reports node. I can open it with notepad.
What might be the problem ?
Thank for help.If the file has been moved to the report repository (ReportRepositoryPath variable defined in configuration.properties of webserver), check if you have rights enough on OS level (maybe different users are in used ?). Check also the stderr/stdout on process scheduler side as well as DSTAGNT files.
Ultimately, shutdown the prcs, purge the cache and restart. Do the same on webserver if possible.
Nicolas. -
Downloaded 5.1.1 to my iphone. Now, Safari will not connect to my server. Can not download web pages and many of my apps. Email seems to be ok. iphone running slow and sluggish. I have read several other users have experienced the same problem. Any solutions?
Basic troubleshooting steps oultlined in the User Guide are restart, reset, restore from backup, restore as new device.
You need to go through all steps in succession until your problem is solved. If going through ALL these steps fails to resolve your issue, then you'll need to bring your phone into Apple for evaluation and possible replacement. -
Why is my iPad suddenly not opening the Yahoo home page? I get a message saying Safari can not open the page due to too many redirects. This started yesterday, and I have already tried shutting off my iPad.
-
Firefox cannot find a server that it has gone to easily in the past. Also it will lock up or can not find a page with in a web site ie like with FoxNews and you want to read and article. Firefox cannot find it. Sometimes I can not even log on to FireFox.
Hi Corel
Thank you for your reply
However I need the lower case version for some sites and the upper case version for the site in question? To make matters worse this site does not allow you to change your log on name unless it is in the form of an e-mail address
So what I need is Kostas for this site and kostas saved for other sites and allow me to choose which one I want to use
How do I do this please
I have no bother with this on Win Internet Explorer but I like Firefox
Mind it may be as simple as deleting The appropriate entry and resetting with Kostas instead of kostas?
But I would appreciate knowing the correct solution from an expert -
Can not open some pages on safari like google or facebook
i can not open some pages on safari, like google or facebook have to turn off a try again then sometimes works
Select ▹ System Preferences ▹ Network ▹ Advanced ▹ TCP/IP ▹ Configure IPv6: Off. Apply the change and test. You must apply the change before it takes effect.
-
i get an error message when trying to download apps from the app store. "Safari can not oprn the page because the address is invalid"
You can't use Safari to download iPad apps. Only use iTunes/App Store.
Cheers, Tom -
Can I display html pages in flash player
Hi all,
Can I display html pages in flash player, i mean swf. Plz
help me if it can be done. Can I call html pages in flash (i mean
in flash player no new window)
Thankshi,
Actullay i want the site to be opened with in the flash
player, just like iframe in dreamweaver calling the external site
in the mail html page. Plz Help me accessing external site page
with in flash player
Thanks -
Why does final cut x not recognize the sharp PN- K321 monitor ( European version ) as output video monitor, and premiere yes?
Working with two cinema display and PN- K321 and I can not preview the output video at 4K by DisplayPort, whereas with premiere and after effects I have no problemsLook, you can build an HD DVD with an SD movie, just as you can build an SD DVD with an HD movie. This is not a bug, it is most likely user error. Apple will not be addressing it.
Just start over, and ensure you are building an SD DVD by bringing up the inspector for the disc (click on the background in the Graphical tab).
Make sure SD DVD is selected:
(If you do the same thing on your ill fated project, you'll see that HD DVD is selected)
Build your DVD and you'll be fine.
Patrick
P.S. You will need to google HD DVD and Blu-Ray if you want to understand the difference between the formats. The reason that DVDSP included HD DVD was that its format was similar to SD DVD's. Blu-Ray is something else entirely. -
Can not make FF my default browser...When asked to make, I get "Your computer must be restarted to complete a previous upgrade of FF". After restart, it's the same thing all over again. I have explorer & chrome installed on my PC.
== This happened ==
Every time Firefox opened
== A few monts ago.It is probably because you are not properly closing Firefox. Restarting your system would make sure that Firefox had terminated, but you do not have to do that.
To properly close Firefox on Windows systems, use
:File > Exit or "Firefox:" button > Exit
When you get the message "Firefox is already running" it is too late, and you must force termination of Firefox through the Windows Task Manager before restarting Firefox. Windows 7 has a keyboard shortcut to save you a step "Ctrl+Shift+Esc" then on "Processes" tab, select "firefox.exe" and use the "End Process" button. More thorough would be to right-click on the "firefox.exec" and choose "End Process Tree".
You would find firefox.exe in a Mozilla folder in your program files, but y0u would not want to delete it there, you would need to use the Control Panel which you have already identified and do it from there -- but generally you would not need to do that, and there is nothing in what you have posted to indicate that you should. But if you did do that, then don't let the install start Firefox for you as you would want to use you existing desktop icon or method of starting Firefox, and should decline having Firefox install start Firefox for you. When the install starts then invoke Firefox in your normal manner. This should eliminate problems of creating a new profile rather than using your old profile. -
My IPad mini hangs on the Internet. Will not start. Have rebooted the home and on / off. There is internet in the house (using it now). Getting the message: Safari can not open the page ...... What do I do?
Try this:
1. Close all inactive apps in the Task Bar. Double-click the Home button and hold apps down for a second or two. Tap the minus sign to close app.
2. Hold the Sleep and Home button down for about 10 seconds until you see the Apple Logo.
Maybe you are looking for
-
When I try to start up my webcam on Yahoo, the **bleep** thing says I am behind a firewall. I have turned on windows firewall and even went as far as trying to turn off Norton. Nothing worked. I was wondering if anyone of you have come across this pr
-
10.6.8 Broken Digital Audio Out
After update from 10.6.7, digital sound worked. However, software such as EyeTV began capturing the digital audio port and keeping it. Quitting EyeTV would not release the audio to other programs. Other programs then routed sound to the internal spea
-
Export result of ssas query result to excel file
Hi All, I have browsed a SSAS cube. I want to export result of SSAS cube into excel file. Kindly give your input. Thanks, Vivek singh
-
Drawling a rectangle creates a Giant rectangle instead of the size I want
Whenever I try to draw a rectangle/square using the Rectangle Tool, I end up creating a GIANT rectangle instead of size I want (something closer to 400x80 px). Here's what I am doing: create new layer from Layers Panel select Rectangle Tool click and
-
wireless authentication not working I found the following in the radius Log Name: Security Source: Microsoft-Windows-Security-Auditing Date: 1/15/2014 2:07:57 AM Event ID: 6273 Task Category: Network Policy Server Level: