Can not print from my pc using time capsule's printer, but the mac in the office will. PC sees the network just not the printer connected to the capsule.

I can't get my pc to see the printer connected to the time capsule, it sees and connect to the network but will not see the printer. The mac in the office see both the network and the printer connected to the capsule.

Suggest that you check to make sure that you installed Bonjour Print Services for Windows v2.0.2 on the PC.
Run the program and hopefully it will find your printer so you can select it and click to get things going.

Similar Messages

Is it possible that after 3 years my Mac computer damaged the port to my camera? I have not always disconnect it properly using eject before disconnecting. I have 2 cameras that are Sony CyberShot and they both shut down when I connect to the computer.

Is it possible that after 3 years my MacBook has damaged the port on my camera? I thought I had a battery problem with both my Sony CyberShot cameras (they are they same age). I had trouble getting the cameras to come on but then when it did come on after charging repeatedly, it turned off when I connected it to the computer to download pictures. I ordered 2 new batteries and the camera came on but went off immediately when I connected it to the computer. After that, the camera would not come back on. Help please!

John, thanks for the email so quickly.
I too hope I haven't tried "everything" either but I am reasonably technical. I had done what you suggested to do before but I did both again.
Ethernet is yellow in the left side bar. In the right pane it's status says Connected but then below it says "Ethernet has a self-assigned IP address and will not be able to connect to the Internet."
I have tried the assist me menu and Network Status has Ethernet Green, Network settings Yellow, ISP Green, and Internet and Server Red and Failed for both. I have turned things off and on, checked cables, deleted all locations and tried restting them up but to no avail. I even disconnected everything and connected the mac directly into the cable modem itself and the thing still will not connect.
Thoughts???

Why can't I print from my iPad using airport express

Why can't I print from my iPad using airport express?

Is the printer connected to the USB port on the AirPort Express?
If yes, Apple does not support printing from the iPad in this manner. Try another App like Printopia which should allow the iPad to print. There is a free trial, so you will know in a few minutes whether this will work.
Printopia - AirPrint to Any Printer - Print from iPad - Print from iPhone ...
Is the printer connected to the AirPort Express using wireless only?
If yes, you must have an AirPrint compatible printer to be able to print directly from the iPad. See if your model is AirPrint compatible in this Apple document:
http://support.apple.com/kb/ht4356
If your printer model appears, the printer may need a firmware update to enable the AirPrint feature. Contact the support folks at your printer manufacturer.
If the printer does not appear, try Printopia as above.

Can I print from my iPad using airport extreme?

Can I print from my iPad using airport extreme 802.11n ?

iOS devices use AirPrint to print directly to a printer. That would require a printer that is AirPrint-ready. Unfortunately, just connecting a non-AirPrint-ready printer to the USB or Ethernet ports of the AirPort Extreme Base Station (AEBS), will NOT enable it for AirPrint.

Can I print from my iPad using wifi

Can I print from my iPad using wifi thanks

I know I can use Airprint and other solutions; that wasn't the point. That will no doubt work from home but what use is that to me in other location? I'm looking to print online purchase receipts, customer receipts, photos, emails etc. Chances are I'll be doing all that from my PC anyway and will stick to that. Why would I want to email my local printer and wait till it gets back to me? And why would I want my PC on just to print? Why wouldn't I just print direct from the PC? I'm missing something here. Why overcomplicate a direct process?
Would you be saying the same thing if mountain lion removes print access and you're told to use airprint? No you won't!
I want to print emails etc from my ipad as I wander different offices, or different houses. That other software did it (at a price I wasn't acepting) and I would assume someone else will build it in eventually, I have to ask why Apple want this controlled through one channel (largely) and can only see it as another tie-in to some money garnering solution in due course. It can't be processing or memory limitations as its 64Gb and Apple tell me it's a powerful gadget.
Time to see what my Asus will allow.... can't be this bad surely, but you never know. Trusty networked HP6 laserjet (via jetdirect box) and Oficejet8000 (duplex) aint going to be replaced in the near future. Trusty workhorses do all I want, efficiently, effectively, and cater for 4 users in this home.

HT4356 can i print from my ipad4 using a kodak wireless printer

can i print from my ipad4 using a kodak wireless printer

If its listed as an airprint enabled printer, you can print right from the ipad with the built in feature. If not, there are other options.
iOS AirPrint Printers http://support.apple.com/kb/HT4356
How to Print from Your iPad: Summary of Printer and Printing Options
http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
Print from iPad / iPhone without AirPrint
http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
How to Enable AirPrint on a Mac and Use Any Printer
http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
iPad Power: How to Print
http://www.macworld.com/article/1160312/ipad_printing.html
Check out these print apps for the iPad.
Print Utility for iPad ($3.99) http://itunes.apple.com/us/app/print-utility-for-ipad/id422858586?mt=8
Print Agent Pro for iPad ($5.99) http://itunes.apple.com/us/app/print-agent-pro-for-ipad/id421782942?mt=8 Print Agent Pro can print to many non-AirPrint and non-wireless printers on your network, even if they are only connected to a Mac or PC via USB.
FingerPrint turns any printer into an AirPrint printer
http://reviews.cnet.com/8301-19512_7-57368414-233/fingerprint-turns-any-printer- into-an-airprint-printer/
Print from iOS device to virtually any printer
http://www.lantronix.com/it-management/xprintserver/xprintserver.html

How can I print from my iPad using AirPrint?

I have an HP6500 printer connected to an Ethernet port of my wifi router. How can I print from my iPad using AirPrint?

Your printer may not support Airprint. Attached is a how to from Apple for Airprint. If you click on the link for HP supported printers, the HP 6500A is listed, not the HP 6500.
http://support.apple.com/kb/HT4356

Why cant i print from my ipad using airport express but i can print from my mac using the express

why cant i print from my ipad using airport express but i can print from my mac using the express

Because your printer has to be Airprint compatible and connected to WiFi. There are applications, such as Printopia, that will allow you to print through your computer.

HT4356 Can I print from my iPhone using a HP Office-jet pro x8500

Can I print from my iPhone using a HP Office-jet pro x8500......
If so.... How????
Cheers

http://support.apple.com/kb/ht4356

Can my old HP print from my iPad using airport express

Can my old HP print from my iPad using airport express.
If yes what can be done.
Thank you.
Merry Christmas

You might be able to get the iPad to print to the HP by installing an App like Print Central on the iPad.
There are no guarantees that this will work, so worst case you will be out about $10 U.S.
PrintCentral for iPad on the iTunes App Store

Can I print from my ipad using a windows 7 shared printer?

Can I print from my ipad using a windows 7 shared printer?

yes... all you need to do is go to the app store and look up something like; printer for ipad and then you are good to go. my ipad lets me so im sure it will you too. i hope i helped you

HT4623 Printing from iPad 2 using iOS 6 to Wi-Fi printer

Need help printing from iPad 2 using iOS 6.0.1 to HP printer.

It does appear in the List of Air Print compatible printers. Assuming the Printer is connected to the same Wifi network as the iPad, then simply choosing the Print option within any App should bring it up.
You may need to refer to the Printers Manual to get it connected to the Wifi Network.
There's no real confuigration to be done on the iPad.
You can print from the Apple applications iBooks, Mail, Photos, and Safari. Apps available from the App Store may also offer this feature.
To print, follow these steps:
Tap the action icon .
Tap the Print button.
Configure the printer options and then tap Print.
Note: If you are printing for the first time, or if the previously selected printer is not available, you will need to select the printer before step 3.

Take laptop & printer to client, need to print from client computer using my printer

I nstalled my HP Laserjet 1102w to my laptop with my ips address to work wireless.
I take my laptop & printer to client's location and need to print from their computers using my HP Laserjet 1102w.
I network in to their ips address using my laptop to.
Could not install my HP Laserjet 1102w on their computer & print from their computer.
How do i print from my HP Laserjet 1102w using their computers at their location?
Thanks!

Hi debitacct ,
Thanks for clarifying that information.
You would have to restore the printer's defaults and reset up the printer on their network at the new location every time, to be able to print from the clients computer and you would have to connect to their network on your computer and add the printer back in again with the new IPv4 address.
Another way you could do this is through a USB connection or use the Wireless Direct.
You would have to enable the Wireless Direct on the printer through the printer's Embedded Web Server if you didn't select this feature during the installation. This will allow both computers to connect directly to the printer and print, but keep in mind you won't have internet access at the same time. So you can print when connected to the printer's network or connect back to the main network again to access the internet.
Here are the steps for enabling the Wireless Direct through the printer's Embedded Web Server if you decide to go this route. Print a configuration page to get the printer's IPv4 address. Printing a Configuration Page.
Type the IP address into your web browser's address bar. (Internet Explorer)
Then click on the Networking tab, select Wireless Direct Setup on the left side and check the Enable wireless direct printing.
I hope I explained that alright for you. The USB connection would most likely be the easiest way to go.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How do i get the hp officejet pro 8600 premium to print from my ipad2 using airprint?

how do i get the hp officejet pro 8600 premium to print from my ipad2 using airprint? The iPad does not see the printer.

Hi RiverBirch,
What brand and model is your router?
First, connect your printer to your router.
1. From printer front panel, press Wireless>Wireless Settings>Wireless Setup Wizard and follow the onscreen instructions to successfully connect your printer with an IP address.
Secondly, connect your iPad to the same router.
1. Connect your iPad to the Internet and download the free HP ePrint Home & Biz app from the apps store.
2. Connect your iPad to the same network as the printer. Settings>Network.
3. Use the new HP Home & Biz app to print and scan photos or docs from your iPad!
Alternatively, you can also perform Airprint on the iPad thru the wireless network from the Photos menu in your iPad.
Please click the blue Kudos star in the post that helped you.

Printing from Elements 8 using Epson Stylus Photo R300

Help! I'm really quite useless at all this computer stuff, and my problem is slowly driving me mad!!! I am trying, unsuccessfully, to print from Elements 8 using an Espon Stylus Photo R300. However, I dont know what settings to use. I can get prints - but they dont represent what I see on the monitor. I have tried using Picasa and the representation on the print isnt too far removed from that on the monitor. iPhoto is slightly worse. Can anyone tell me in simple english what settings I need to use - I have seen other discussions on the same topic and think that color management should be done by the Elements 8 and not the printer? Any help would be very much appreciated - before I lose it all together

Hi Syd. I was out on the web and saw where you respond to a message about printing using R300 printer. If you can help me that would be great.. this is the message that I sent Jayne who was having a problem..
Hi Jayne,
Did you get you problem resolved. I am experiencing the same problem with with element 8 and Epson r300 printer. I tried both support groups Adobe wanted me to upgrade to element 9. and Epson gave me the phone running. I have taking the printer to a Epson service center and the printer is working fine. I have change the various options in the software and no sucess. I had one image that I only crop and it the colors came out wrong. Now if I don't touch the image and just print it the colors come out fine.. So please let me know if you got it resolved.

Can not print from my pc using time capsule's printer, but the mac in the office will. PC sees the network just not the printer connected to the capsule.

Similar Messages

Maybe you are looking for