Can not publish; 'need at least one ep.'

Hello,
I am trying to add this feed http://weblogs.vpro.nl/radioarchief/feed/ to our list of podcasts. When I go to the 'Publish' tab it show me in red:
Warning
You cannot publish your site until you correct the errors outlined below:
- Before you can publish the podcast "VPRO Radio Archief", you must add at least 1 episode or hide the podcast.
Now when I open the feed in my browser it shows me all the podcasts and the formatting of the url is the same as other podcasts that we have that are working.
Can anyone help me with this?

That's something you have to in WordPress and I'm afraid I can't advise on that. Presumably you have actually added some playable media to the WordPress site? (attempting to visit your site brings up your cookies announcement) - if so there is evidently something you have to do in WordPress to turn the feed from a blog into a podcast.

Similar Messages

I have Adobe Photoshop Elements 10. However it converts all my pdf files to Photoshop Elements 10 so I can not email them because no one can read them they are not pdf files anymore. What do I do?

I have Adobe Photoshop Elements 10. However it converts all my pdf files to Photoshop Elements 10 so I can not email them because no one can read them they are not pdf files anymore. What do I do?

Nothing has been converted. You first need to convince yourself of this.
Start Adobe Reader (or Adobe Acrobat, if you have it). Use Open from the File menu. Pick one of your PDF files. Does it open OK? If not, what happens?
Ok, these emails. What exactly happens when trying to open them?

Can not publish Ical in 10.5

I can not publish my large work calender to the web. Every time I try to do so I get a message that it is unavailable. I have opened/closed; published/unpublished; exported and imported the calender and still nothing. I really need to be able to publish it
It worked till I went to 10.3

Same problem here. Publishing to http://mydisk.provider.net says
"The server responded with
"HTTP/1.1 503 Service Unavailable"Service not available"
However simply mounting http://mydisk.provider.net as a WebDAV Disk in the Finder is no problem so I blame iCal rather than my provider for the occasional(!) error.

Can not publish or export CS4, Vista

Hello all,
I'm hoping someone has had this problem and can help. I am using a new computer with Vista. I'm using Flash CS4. My flash document is huge and has an imported video in it. So the file size is 675 MB. (I'm guessing this is the problem). Anyway, I have moved the flash document from the server to my computer. I also saved it as a CS4 version - it was created in MX. I can not publish it or export it. I need it to be a swf file, html, or .mov. I was able to do it once as a swf file, but I needed to make changes to it and now I can't get it to export again. The progress bar shows up like it's publishing, but when it's halfway done, the window disappears and nothing has happened.
It's enough to drive you insane. Does anyone have any thoughts?
Thanks in advance.

Hello,
Well, I converted it into an flv after I read about it in the help. But the quality was horrible. It made the video into a smaller file, but it made it grainy and pixilated. I think the original format of my video was the problem, however. Because I was reading in the CS4 help docs and it said the only format you can import is flv. I originally imported the wmv into Flash MX and then opened that file in Flash CS4. So I bet when I went to export from CS4 it would process until it got to the wmv and then just stop. Would be nice if there as an error message. Still doesn't explain why I was able to export it from CS4 once though! Oh and the help also says that you should only embed a short - 10 second etc - video directly into the timeline in Flash. oops! Mine was 12 minutes, ha.
Anyway, thanks for the idea about just using Windows Movie Maker. I didn't know you could add titles to scenes until you mentioned it and then I read about it in WMM. I had to trick the program a little to get my titles to be on the top of the scene instead of the middle, but it will work for next time.
Thanks!

Exporting error "Nothing can be exported until at least one setting is configured"

I imported a GPO Folder export into Microsoft Security Compliance Manager.
Then, I went to export it as SCCM DCM 2007 (.cab) so that I can prepare to import it into SCCM for Configuration Baseline data.
However, Compliance Manager throws me an error which I haven't run into on any other GPO's I've done the same process for.
Does anyone know what this mean and how I can fix this?
After import, I go to Export:
Save it as file name USGCB WIN7 User Settings_DCM.CAB
Immediately get this message, so it doesn't save after all:
Microsoft Security Compliance Manager
Nothing can be exported until at least one setting is configured.
OK
Does anyone know what needs to be configured? It seems to me the settings are configured? I haven't got this message until this one and I've done about 10 other exports with no issue.

Were you able to resolve this issue, I'm encountering the same exact issue (SCCM 2012 R2, SCM 3.0, trying to export a GPO, which was imported into SCM, in the hope of exporting it, to create a 'GPO baseline' in SCCM 2012).
Regards TIA!

Can not color label more than one file at a time

Hi,
I've had this problem since 10.6.6-ish, i can not color label more than one file at a time in the Finder.
Wether i select two, twenty or twohundred only one file gets color labeled.
It doesn't seem to matter if i assign a color label through the File menu or right click > label.
Figured a re-install might fix this but it hasn't (even a clean install without restoring any kind of backup).
Does anyone else have this issue and/or a fix for it?
Thanks,
Jay

Aaaaanyone ?

Need Help with boot camp install, keep getting message can not install need

Hi Folks,
I keep getting a message that the boot camp assistant can not install needs firmware update. All updates are currently installed. I have tried all available updates and hey ell me the computer doesn't need them????
Any help that you may provide is greatly appreciated.
Jack
P.S. The computer is an Imac early 2006 1.83 gb.
Machine Name: iMac
Machine Model: iMac4,1
CPU Type: Intel Core Duo
Number Of Cores: 2
CPU Speed: 1.83 GHz
L2 Cache (shared): 2 MB
Memory: 1 GB
Bus Speed: 667 MHz
Boot ROM Version: IM41.0039.B00
Serial Number: W86220MSU2N
SMC Version: 1.1f5

You do not have the firmware update installed. You only have the SMC firmware update. Boot Camp requires this firmware update.

Can not publish photos from iPhoto to Facebook

I can not publish photos from iPhoto to Facebook, it keeps looping back to the set up window even after Facebook opens up

what version of iPhoto? Is OS X 10.5.8 as you state correct?
LN

I can not publish my iweb site to moblie me

I had originally written and published a site with no problems.
However since then I tried to publish my changes and the iweb would show up as "not responding"
I tried other avenues to change my site which at first worked then failed so I deleted the site amd tried to start over thinking that may solve the issue.
It still will not publish merely stops reponding
Just to clarify - I found that I was able to make changes by publishing the iweb to a folder and then uploading the altered files to mobile me. This worked fine to start with but then I added some hyperlinks then uploaded the replacement html pages again - this caused the whole layout to change. This is the reason why I basically deleted the site.
I can still not publish my site now - same problem when I click the publish or publish all it freezes!

Hello Frank,
The good thing of all your efforts is that you could determine the problem to iWeb.
Frank Jacob wrote:
... come on apple get it together!
Well, there are at least 2 more well known issues that you didn't verify yet, at least I didn't see it in your post.
i get a portion of the files published only.
This is a clue to these 2 issues: a wrong filename or a problematic widget.
Go back in history to the point where you had your last successful 'Publish'
Have a good look at the filenames of the pages you created since then.
Is a very big chance there is a "wrong" character in the name or 2 spaces..
With a little bit of luck, when you do a Publish, you can see iWeb hanging on the name
of the problematic page (not always).
If it isn't the filename, try selectively remove widgets and do a Publish.
The moment Publish works, you've found the villain.
As this tip involves deleting things, make a backup of your domain file first.
Let me know if these tips don't apply to your situation.
I still have one radical solution at hand.
Kind regards,
Leo

Can Not Publish "Step By Step" To Word

Hello All-
I am trying to publish a "step by step" to a word document, but when I do I get an error message (Print Screen attached).
I use OpenOffice rather then word, is this what is causing the problem? Also the "error log" that captivate is trying to create is non existent because the directory it is trying to save it to does not exist....
Any help would be appreciated.

Rick-
Now it is working fine (so far), I've only had it installed for a few days, and at this point I still lean pretty heavily on Flash to create content (read, its new and I dont know how to work it).
The install was not Captivates fault actually it was because I downloaded the beta of flash player 10.1, and I could NOT uninstall it, captivate couldn't find it (it was in programs (x86) and captivate was looking in programs). Finally out of frustration I just did a clean install of Windows. I have plenty of back up drives so I just saved everything I needed and started fresh, and from there I have had no problems.
In general Windows 7 is great OS, I've been using the beta for over 6 months now and haven't had a single problem, aside from the occasional driver issue (which I haven't had since it went into production which is encouraging, one of the biggest problems I had with Vista was sound card/driver issues that NEVER were fully resolved)
The only other "Adobe/Windows7" issues I've had (that were not related to the Flash player) was some weird problem where Fireworks needed to modify my registry everytime I ran it, but that too has been resolved by reinstalling Windows.
I did follow your recommendation and send an email to the "feature request"
Hello-
I was trying to publish module to "step by step" text document. I use OpenOffice and don't have Word on my computer. I found out that I could not use this feature with out word. I don't know anything about Software development, but my assumption is that Captivate can not just create a .doc file with out access to some portion of the native word program?
It would be great to be able to use other word processing programs, such as OpenOffice or iWork (for those Apple people out there) I got the impression through your forums that Captivate ONLY publishes to MS Word.
If other Word processing programs are too intensive to "patch", being able to publish them to a PDF file would be a nice work around. Thanks for your consideration. Regards, Nathan Stryker 612-208-9081 (please feel free to contact me if you would like more information or know of a work around)
Any good resources online to get more value out of captivate (other then Lyndia)?
Regards,
Nathan

Still can not publish by iWeb

always show publish error "an error occurred while publishing file /Web/Sites/xxxx"
and I can not find any problem. Please help.
Thanks,
Chris

Welcome to the Apple Discussions. First try the basic fixes: 1 - repair disk permisisons; 2 - delete the iWeb preference file, com.apple. iWeb.plist, that resides in your User/Library/Preferences folder.
Next try to publish to a folder on the desktop? If still not successful get the name of the file that's giving you problems and try the following:
1 - *first make a backup copy of your domain.sites2 file*.
2 - open the working domain.sites2 file and see if you can located the problem file.
3 - move that file to the desktop.
4 - open iWeb and check each page to see if you can tell what was removed. If ithe item was one that you added, i.e. a photo or graphic, you may have to add it again.
5 - publish again to a folder. If you get it published to a folder, open the site in your browser and check the pages carefully to make sure all elements are present.
OT

Can not publish my changes

I have been successfully publishing 3 different websites. I spent about 2 hours updating the sites and now I can't publish?? I get this error:
Can’t create the file “footer.jpg.” The disk may be damaged or full, or you may not have sufficient access privileges.
I called support and they said my footer, which is my trademarked logo may be the problem...HOWEVER, this is already present at the footer of every one of my pages and I don't want to remove it.
Any thoughts on how to fix this??
JuliesRugs.com is one of the sites...
thanks!

Publish to a local folder and double click the index.html file to launch your site in the browser.
If this doesn't work out, try the troubleshooting steps under "Fix iWeb" here....
http://www.iwebformusicians.com/WebMusic/iWebTips.html
If the site launches OK from the local folder then you will have to look at your publishing.
You don't say whether you are publishing to MobileMe or another server.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
<Edited by Host>

I can not send a text to one of my contacts!!! HELP!!!

I can not send any text messages to one of my contacts, I can receive them from her and also I can receive and make phone calls to this person, but I can not send a text??? any suggestions???

i can send a text them just not iMessage

Can not attach any files to one of my accounts

Hello
i seem to have problems with attachments. I have 5 e-mail accounts with mail. on 4 of them i can not put attachments. I have to first use the one account which i can add attachment and then change over to the other account
any idea

Ernie
thanks for the reply Here are the answers to your questions.
yes each account has it's own drafts folder. and I can save the file into the drafts folder after follow the steps you outlined in your answer. I did repair permission but nothing has changed .
one thing i discovered is that I can attach files to the mail if i reply to it. only when i create a new mail in one of those accounts can i not attach any files.
Seeing on the side bar that you are a top user I have another question you might be able to answer
my apple help is not working, when i go to finder and go to mac help the page is blank and if i search it just searches and nothing happens

TS2972 My Apple TV 3 can not set time network, since one week from now, before was working perfectly

My Apple TV 3 just stop working, it can not set the time network I have call for support and done everything as requested and still nothing, can somebody help me with This it has pass a week and nothing yet. I even restored as support toll me too, no timé still can be set. HELP PLEASE

I have the exact same problem as KAR1973, and have tried everything. Relatively new latest Gen ATV, worked fine for couple months, then suddenly today will not set network time, will not activate, and only shows the "computer" and "settings" icons on menu screen. Will not allow me to log into AppleID/Itunes account.
Very frustrating. Tried resetting, restoring (on screen and directly connected to Itunes) mutliple times, rebooted router multiple times, even checked the ntp settings in router (get network time shows as "enabled"), tried it all on wireless and ethernet, and still same problem.
Appears many people have same problem based on google searches. My question is what is Apple doing about this?? Am tired of spending hours trying to figure this out, so am putting it away, and will buy a Roku or another competitor's box instead.
Apple needs to do a better job standing by its product, figure out what the problem is, and put out some helpful guidance, particularly for people who don't have advanced computer or network expertise (inculding myself.)

Can not publish; 'need at least one ep.'

Similar Messages

Maybe you are looking for