Can not publish or export CS4, Vista

Hello all,
I'm hoping someone has had this problem and can help. I am using a new computer with Vista. I'm using Flash CS4. My flash document is huge and has an imported video in it. So the file size is 675 MB. (I'm guessing this is the problem). Anyway, I have moved the flash document from the server to my computer. I also saved it as a CS4 version - it was created in MX. I can not publish it or export it. I need it to be a swf file, html, or .mov. I was able to do it once as a swf file, but I needed to make changes to it and now I can't get it to export again. The progress bar shows up like it's publishing, but when it's halfway done, the window disappears and nothing has happened.
It's enough to drive you insane. Does anyone have any thoughts?
Thanks in advance.

Hello,
Well, I converted it into an flv after I read about it in the help. But the quality was horrible. It made the video into a smaller file, but it made it grainy and pixilated. I think the original format of my video was the problem, however. Because I was reading in the CS4 help docs and it said the only format you can import is flv. I originally imported the wmv into Flash MX and then opened that file in Flash CS4. So I bet when I went to export from CS4 it would process until it got to the wmv and then just stop. Would be nice if there as an error message. Still doesn't explain why I was able to export it from CS4 once though! Oh and the help also says that you should only embed a short - 10 second etc - video directly into the timeline in Flash. oops! Mine was 12 minutes, ha.
Anyway, thanks for the idea about just using Windows Movie Maker. I didn't know you could add titles to scenes until you mentioned it and then I read about it in WMM. I had to trick the program a little to get my titles to be on the top of the scene instead of the middle, but it will work for next time.
Thanks!

Similar Messages

Can not publish Ical in 10.5

I can not publish my large work calender to the web. Every time I try to do so I get a message that it is unavailable. I have opened/closed; published/unpublished; exported and imported the calender and still nothing. I really need to be able to publish it
It worked till I went to 10.3

Same problem here. Publishing to http://mydisk.provider.net says
"The server responded with
"HTTP/1.1 503 Service Unavailable"Service not available"
However simply mounting http://mydisk.provider.net as a WebDAV Disk in the Finder is no problem so I blame iCal rather than my provider for the occasional(!) error.

I can´t publish or export to flash

Hello, I have installed Captivate 6.0.1 in a Mac.
When I finished, I try to publish and a blank square was in the screen in time the publish menu.
I try upgrade Captivate, reinstalled and the problem is continuous.
When I try to export to Flash CS6 or CS5, generate an error message.
Thanks in advanced.

Shekhar
I found and other problem, when you Can publish (a friend have a PC with
the program), I create a SCORM. This file is mow in a Moodle course. When
you open the SCORM all look well, but if you open and URL and return to the
SCORM, the buttons go away.
You need recalled the page in web navigator to see again.
What is *wrong?
*Raúl
2013/3/5 raul cuellar <[email protected]>
Hello again Shekhar
Yes, in this address I found the Captive carpet. Then I changed the name
and reestarted the program.
Now I see this page at started and whe try to publish.
image: Imágenes integradas 1
image: Imágenes integradas 2
>
What I can do?
Thanks in advanced
Raúl Cuéllar
>
2013/3/5 Shekhar_Dhiman <[email protected]>
>> **
>> Re: I can´t publish or export to flash created by Shekhar_Dhiman<http://forums.adobe.com/people/Shekhar_Dhiman>in
>> Adobe Captivate - View the full discussion<http://forums.adobe.com/message/5124277#5124277>

Can not publish photos from iPhoto to Facebook

I can not publish photos from iPhoto to Facebook, it keeps looping back to the set up window even after Facebook opens up

what version of iPhoto? Is OS X 10.5.8 as you state correct?
LN

Can Not Publish "Step By Step" To Word

Hello All-
I am trying to publish a "step by step" to a word document, but when I do I get an error message (Print Screen attached).
I use OpenOffice rather then word, is this what is causing the problem? Also the "error log" that captivate is trying to create is non existent because the directory it is trying to save it to does not exist....
Any help would be appreciated.

Rick-
Now it is working fine (so far), I've only had it installed for a few days, and at this point I still lean pretty heavily on Flash to create content (read, its new and I dont know how to work it).
The install was not Captivates fault actually it was because I downloaded the beta of flash player 10.1, and I could NOT uninstall it, captivate couldn't find it (it was in programs (x86) and captivate was looking in programs). Finally out of frustration I just did a clean install of Windows. I have plenty of back up drives so I just saved everything I needed and started fresh, and from there I have had no problems.
In general Windows 7 is great OS, I've been using the beta for over 6 months now and haven't had a single problem, aside from the occasional driver issue (which I haven't had since it went into production which is encouraging, one of the biggest problems I had with Vista was sound card/driver issues that NEVER were fully resolved)
The only other "Adobe/Windows7" issues I've had (that were not related to the Flash player) was some weird problem where Fireworks needed to modify my registry everytime I ran it, but that too has been resolved by reinstalling Windows.
I did follow your recommendation and send an email to the "feature request"
Hello-
I was trying to publish module to "step by step" text document. I use OpenOffice and don't have Word on my computer. I found out that I could not use this feature with out word. I don't know anything about Software development, but my assumption is that Captivate can not just create a .doc file with out access to some portion of the native word program?
It would be great to be able to use other word processing programs, such as OpenOffice or iWork (for those Apple people out there) I got the impression through your forums that Captivate ONLY publishes to MS Word.
If other Word processing programs are too intensive to "patch", being able to publish them to a PDF file would be a nice work around. Thanks for your consideration. Regards, Nathan Stryker 612-208-9081 (please feel free to contact me if you would like more information or know of a work around)
Any good resources online to get more value out of captivate (other then Lyndia)?
Regards,
Nathan

Still can not publish by iWeb

always show publish error "an error occurred while publishing file /Web/Sites/xxxx"
and I can not find any problem. Please help.
Thanks,
Chris

Welcome to the Apple Discussions. First try the basic fixes: 1 - repair disk permisisons; 2 - delete the iWeb preference file, com.apple. iWeb.plist, that resides in your User/Library/Preferences folder.
Next try to publish to a folder on the desktop? If still not successful get the name of the file that's giving you problems and try the following:
1 - *first make a backup copy of your domain.sites2 file*.
2 - open the working domain.sites2 file and see if you can located the problem file.
3 - move that file to the desktop.
4 - open iWeb and check each page to see if you can tell what was removed. If ithe item was one that you added, i.e. a photo or graphic, you may have to add it again.
5 - publish again to a folder. If you get it published to a folder, open the site in your browser and check the pages carefully to make sure all elements are present.
OT

I can not publish and query services in Registry Server?Help please!

I want to use Registry Server in Jwsdp1.5 to publish and query services,but there is some problems:
2006-4-26 10:05:26 com.sun.registry_server.server.RegistryServerServlet init
��: NamingException: javax.naming.NameNotFoundException: Name org.xml.sax.driver is not bound in this Context
2006-4-26 10:05:27 com.sun.xml.messaging.saaj.soap.MessageImpl identifyContentType
��: SAAJ0537: �� SOAP ��
2006-4-26 10:05:27 com.sun.xml.messaging.saaj.soap.MessageImpl <init>
��: SAAJ0535: ��
javax.xml.registry.JAXRException: com.sun.xml.messaging.saaj.SOAPExceptionImpl: java.security.PrivilegedActionException: com.sun.xml.messaging.saaj.SOAPExceptionImpl: Unable to internalize message
     at com.sun.xml.registry.uddi.RegistryServiceImpl.jaxmSend(Unknown Source)
     at com.sun.xml.registry.uddi.RegistryServiceImpl.send(Unknown Source)
     at com.sun.xml.registry.uddi.Processor.processRequestJAXB(Unknown Source)
     at com.sun.xml.registry.uddi.UDDIMapper.findOrganizations(Unknown Source)
     at com.sun.xml.registry.uddi.BusinessQueryManagerImpl.findOrganizations(Unknown Source)
     at QueryByName.doPost(QueryByName.java:63)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:535)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
     at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:790)
     at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:709)
     at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:572)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:644)
     at java.lang.Thread.run(Thread.java:595)
Caused by: com.sun.xml.messaging.saaj.SOAPExceptionImpl: java.security.PrivilegedActionException: com.sun.xml.messaging.saaj.SOAPExceptionImpl: Unable to internalize message
     at com.sun.xml.messaging.saaj.client.p2p.HttpSOAPConnection.call(HttpSOAPConnection.java:127)
     ... 34 more
Caused by: java.security.PrivilegedActionException: com.sun.xml.messaging.saaj.SOAPExceptionImpl: Unable to internalize message
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sun.xml.messaging.saaj.client.p2p.HttpSOAPConnection.call(HttpSOAPConnection.java:121)
     ... 34 more
Caused by: com.sun.xml.messaging.saaj.SOAPExceptionImpl: Unable to internalize message
     at com.sun.xml.messaging.saaj.soap.MessageImpl.<init>(MessageImpl.java:231)
     at com.sun.xml.messaging.saaj.soap.ver1_1.Message1_1Impl.<init>(Message1_1Impl.java:43)
     at com.sun.xml.messaging.saaj.soap.ver1_1.SOAPMessageFactory1_1Impl.createMessage(SOAPMessageFactory1_1Impl.java:32)
     at com.sun.xml.messaging.saaj.client.p2p.HttpSOAPConnection.post(HttpSOAPConnection.java:354)
     at com.sun.xml.messaging.saaj.client.p2p.HttpSOAPConnection$PriviledgedPost.run(HttpSOAPConnection.java:150)
     ... 36 more
Caused by: com.sun.xml.messaging.saaj.SOAPExceptionImpl: Invalid Content-Type:text/html. Is this an error message instead of a SOAP response?
     at com.sun.xml.messaging.saaj.soap.MessageImpl.identifyContentType(MessageImpl.java:295)
     at com.sun.xml.messaging.saaj.soap.MessageImpl.<init>(MessageImpl.java:146)
     ... 40 more
can you help me?expectiong your advise!thank you

I have created my own private registry, I hava installed JWSDP1.5.
I use a .jsp file and a servlet to publish services,the servlet is:
import javax.xml.registry.*;
import javax.xml.registry.infomodel.*;
import java.net.*;
import java.security.*;
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
import java.util.*;
public class Publish extends HttpServlet{
     public void doGet(HttpServletRequest request,HttpServletResponse response)
     throws ServletException,IOException{
          doPost(request,response);
     public void doPost(HttpServletRequest request,HttpServletResponse response)throws ServletException,IOException{
     String userName=request.getParameter("username");
     String authPassword=request.getParameter("password");
     Connection connection = null;
RegistryService rs=null;
BusinessLifeCycleManager blcm=null;
BusinessQueryManager bqm = null;
     Properties props=new Properties();
props.setProperty("javax.xml.registry.queryManagerURL","http://localhost:8080/RegistryServer");
props.setProperty("javax.xml.registry.lifeCycleManagerURL","http://localhost:8080/RegistryServer");
props.setProperty("javax.xml.registry.factoryClass","com.sun.xml.registry.uddi.ConnectionFactoryImpl");
//props.setProperty("com.sun.xml.registry.http.proxyHost",httpHost);
//props.setProperty("com.sun.xml.registry.http.proxyPort",httpPort);
// props.setProperty("com.sun.xml.registry.https.proxyHost",httpsHost);
// props.setProperty("com.sun.xml.registry.https.proxyPort",httpsPort);
try{
// Create the connection, passing it the
// configuration properties
ConnectionFactory factory =
ConnectionFactory.newInstance();
factory.setProperties(props);
connection=factory.createConnection();
PrintWriter out=response.getWriter();
out.println("<a href=\"/publishapp/publish.jsp\">You can click here to be Back </a>");
out.println("<H3>Created connection to registry</H3>");
rs=connection.getRegistryService();
blcm = rs.getBusinessLifeCycleManager();
bqm = rs.getBusinessQueryManager();
//out.println("Got registry service, query " +"manager, and life cycle manager");
// Get authorization from the registry
PasswordAuthentication passwdAuth =
new PasswordAuthentication(userName,authPassword.toCharArray());
Set creds = new HashSet();
creds.add(passwdAuth);
connection.setCredentials(creds);
out.println("<br>");
out.println("<H3>Established security credentials</H3>");
//receive organization name and description
String orgName=request.getParameter("orgname");
String orgDescription=request.getParameter("orgdescription");
// Create organization name and description
Organization org =
blcm.createOrganization(orgName);
InternationalString s =
blcm.createInternationalString(orgDescription);
org.setDescription(s);
//receive contactor name phone and Email
String contactName=request.getParameter("contactname");
String contactPhone=request.getParameter("contactphone");
String contactEmail=request.getParameter("contactemail");
// Create primary contact, set name
User primaryContact = blcm.createUser();
PersonName pName =
blcm.createPersonName(contactName);
primaryContact.setPersonName(pName);
// Set primary contact phone number
TelephoneNumber tNum = blcm.createTelephoneNumber();
tNum.setNumber(contactPhone);
Collection phoneNums = new ArrayList();
phoneNums.add(tNum);
primaryContact.setTelephoneNumbers(phoneNums);
// Set primary contact email address
EmailAddress emailAddress =blcm.createEmailAddress(contactEmail);
Collection emailAddresses = new ArrayList();
emailAddresses.add(emailAddress);
primaryContact.setEmailAddresses(emailAddresses);
// Set primary contact for organization
org.setPrimaryContact(primaryContact);
String serviceName=request.getParameter("servicename");
String serviceDescription=request.getParameter("servicedescription");
String serviceURL=request.getParameter("serviceurl");
String svcbindDescription=request.getParameter("svcbinddescription");
// Create services and service
Collection services = new ArrayList();
Service service =
blcm.createService(serviceName);
InternationalString is =
blcm.createInternationalString(serviceDescription);
service.setDescription(is);
// Create service bindings
Collection serviceBindings = new ArrayList();
ServiceBinding binding = blcm.createServiceBinding();
is = blcm.createInternationalString(svcbindDescription);
binding.setDescription(is);
// allow us to publish a fictitious URL without an error
binding.setValidateURI(false);
binding.setAccessURI(serviceURL);
serviceBindings.add(binding);
// Add service bindings to service
service.addServiceBindings(serviceBindings);
// Add service to services, then add services to organization
services.add(service);
org.addServices(services);
//receive Classification scheme name and value
String classificationScheme=request.getParameter("classificationscheme");
String classificationName=request.getParameter("classificationname");
String classificationValue=request.getParameter("classificationvalue");
// Set classification scheme to NAICS
ClassificationScheme cScheme =
bqm.findClassificationSchemeByName(null, classificationScheme);
// Create and add classification
Classification classification = blcm.createClassification(cScheme,
classificationName,classificationValue);
Collection classifications = new ArrayList();
classifications.add(classification);
org.addClassifications(classifications);
// Add organization and submit to registry
// Retrieve key if successful
Collection orgs = new ArrayList();
orgs.add(org);
BulkResponse response1 = blcm.saveOrganizations(orgs);
Collection exceptions = response1.getExceptions();
if (exceptions == null) {
out.println("<br>");
out.println("<H3>Service Registering is Sucessful!</H3>");
out.println("<br>");
out.println("<H3>service information saved is</H3>");
out.println("<H3>");
out.println(orgName);
out.println("</H3>");
Collection keys = response1.getCollection();
Iterator keyIter = keys.iterator();
if (keyIter.hasNext()) {
javax.xml.registry.infomodel.Key orgKey =
(javax.xml.registry.infomodel.Key) keyIter.next();
String id = orgKey.getId();
out.println("<H3>service key is </H3>");
out.println("<H3>");
out.println(id);
out.println("</H3>");
} else {
Iterator excIter = exceptions.iterator();
Exception exception = null;
while (excIter.hasNext()) {
exception = (Exception) excIter.next();
System.err.println("Exception on save: " +
exception.toString());
} catch (Exception e) {
e.printStackTrace();}
the exception in the tomcat50-jwsdp/logs:
javax.xml.registry.JAXRException: javax.xml.bind.JAXBException
- with linked exception:
[javax.xml.soap.SOAPException: Unable to create message factory for SOAP: Provider com.sun.xml.messaging.saaj.soap.MessageImpl could not be instantiated: java.lang.IllegalAccessException: Class javax.xml.soap.FactoryFinder can not access a member of class com.sun.xml.messaging.saaj.soap.MessageImpl with modifiers "protected"]
     at com.sun.xml.registry.uddi.Processor.processRequestJAXB(Unknown Source)
     at com.sun.xml.registry.uddi.UDDIMapper.getAuthorizationToken(Unknown Source)
     at com.sun.xml.registry.uddi.ConnectionImpl.setCredentials(Unknown Source)
     at Publish.doPost(Publish.java:66)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:535)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
     at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:790)
     at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:709)
     at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:572)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:644)
     at java.lang.Thread.run(Thread.java:595)
Caused by: javax.xml.bind.JAXBException
- with linked exception:
[javax.xml.soap.SOAPException: Unable to create message factory for SOAP: Provider com.sun.xml.messaging.saaj.soap.MessageImpl could not be instantiated: java.lang.IllegalAccessException: Class javax.xml.soap.FactoryFinder can not access a member of class com.sun.xml.messaging.saaj.soap.MessageImpl with modifiers "protected"]
     at com.sun.xml.registry.common.util.MarshallerUtil.jaxbMarshalObject(Unknown Source)
     ... 32 more
expecting yours advise, thanks!!

I can not install any Adobe CS4 software to my laptop (Windows 7 Ultimate Final)

I download the trial packet and installing or I use my disk, it's always cause the same problemb.
Adobe OnLocation CS4
Error:
Error 1603. Fatal error during installation.
Adobe Premiere Pro CS4
Error:
Error 1603. Fatal error during installation.
Adobe Media Encoder CS4
Error:
Error 1603. Fatal error during installation.
Althought I search much more in the internet but I can not fix it. Run as adminnistrator, Disable Windows Defender, Disasble Antivirus, Clean all adobe software, turn off User account control, Copy to C:\Adobe CS4\,...
I use Windows 7 Ultimate Final, updated and activated. Can anyone help me, thanks !

Googling this appears to be a Microsoft error, not an Adobe error, and generally indicates a problem writing one or more files to the install location.
Here is one of the things Google brought up, back from 2007:
http://www.symantec.com/connect/articles/understanding-error-1603-fatal-error-during-insta llation
Here is an Adobe KB article about the error:
http://kb2.adobe.com/cps/408/kb408716.html
Does this error happen at the beginning of installing each thing or have things been running awhile? At the beginning it would suggest a general problem with the install location like permissions or drive-corrupting or something.
If things have been running a while, perhaps the installer is having a problem with a specific file. Do you have any other Adobe products related to Photoshop installed that could be locking one of the files?

Can not open an indesign cs4 file, made by a testversion.

Hey there,
the failure notice is about updating add ons. Now I got them all, but it does'nt work either. Does this problem sound familiar to anyone or is there a pro who can help?

The exact error is (in german):
"...indd" kann nicht geöffnet werde. Aktualisieren Sie Ihre Zusatzmodule auf die aktuelle Version oder rüsten Sie auf die aktuelle Version von Adobe InDesign auf.
I try to translate:
"...indd" can not be opened. Update your additional tools on the actual (new) version or update on the actual (new) version of Adobe InDesign.
I use the computers in my university, so I do'nt have any rights to update. But earlier this day I asked one of the admins and he updated his own pc (which has got the same version and updates of InDesign CS4). It did'nt work either and it was the same error.

I can not publish my iweb site to moblie me

I had originally written and published a site with no problems.
However since then I tried to publish my changes and the iweb would show up as "not responding"
I tried other avenues to change my site which at first worked then failed so I deleted the site amd tried to start over thinking that may solve the issue.
It still will not publish merely stops reponding
Just to clarify - I found that I was able to make changes by publishing the iweb to a folder and then uploading the altered files to mobile me. This worked fine to start with but then I added some hyperlinks then uploaded the replacement html pages again - this caused the whole layout to change. This is the reason why I basically deleted the site.
I can still not publish my site now - same problem when I click the publish or publish all it freezes!

Hello Frank,
The good thing of all your efforts is that you could determine the problem to iWeb.
Frank Jacob wrote:
... come on apple get it together!
Well, there are at least 2 more well known issues that you didn't verify yet, at least I didn't see it in your post.
i get a portion of the files published only.
This is a clue to these 2 issues: a wrong filename or a problematic widget.
Go back in history to the point where you had your last successful 'Publish'
Have a good look at the filenames of the pages you created since then.
Is a very big chance there is a "wrong" character in the name or 2 spaces..
With a little bit of luck, when you do a Publish, you can see iWeb hanging on the name
of the problematic page (not always).
If it isn't the filename, try selectively remove widgets and do a Publish.
The moment Publish works, you've found the villain.
As this tip involves deleting things, make a backup of your domain file first.
Let me know if these tips don't apply to your situation.
I still have one radical solution at hand.
Kind regards,
Leo

Can not publish to iweb after upgrading to icloud

I have upgrdaded my mobileme account to icloud but did not realise that iCloud does not support hosting iweb and that I will have to find a new host, But the support page tells me I can still publish any changes through mobileme until June 2012 even though I have upgraded. But I can't see how. When I press 'publish site' I get a message saying that I have upgraded to icloud. Can anyone help me!

Try this:
go to the System/MobileMe preference pane and log out of MMe.
login with a bogus username and password like "Ying" and "Yang". This clears the caches.
login with your correct username and password.
launch iWeb and try again.
OT

Can not publish my changes

I have been successfully publishing 3 different websites. I spent about 2 hours updating the sites and now I can't publish?? I get this error:
Can’t create the file “footer.jpg.” The disk may be damaged or full, or you may not have sufficient access privileges.
I called support and they said my footer, which is my trademarked logo may be the problem...HOWEVER, this is already present at the footer of every one of my pages and I don't want to remove it.
Any thoughts on how to fix this??
JuliesRugs.com is one of the sites...
thanks!

Publish to a local folder and double click the index.html file to launch your site in the browser.
If this doesn't work out, try the troubleshooting steps under "Fix iWeb" here....
http://www.iwebformusicians.com/WebMusic/iWebTips.html
If the site launches OK from the local folder then you will have to look at your publishing.
You don't say whether you are publishing to MobileMe or another server.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
<Edited by Host>

I can not open the "export" menu in Elements 13

How can I open th export option to make a photo merge?

Organizer menu Edit/Photomerge ? (no shortcut available)
From the editor, menu Enhance/Photomerge.

TS5376 can not install itunes on windows vista even after following everything to do.

Can not download or install itunes. Follow everything in the support file and still can not get it to download.

See the further information area of Troubleshooting issues with iTunes for Windows updates for download tips.
tt2

Can not publish video form ipad 2 to you tube

can not upload video to you tube on ipad 2

what do you try?
what result do you expect?
what result do you get?
in what way does the result you get differ from the result you expect
if I record a clip on my phone and go into pictures and click on the clikc arrow out of square box icon I get the option of tranfering it to youtube

Can not publish or export CS4, Vista

Similar Messages

Maybe you are looking for