Can not refresh the metrics in schedular

Post Author: sachinddalal
CA Forum: Performance Management and Dashboards
Hi,
When I refresh the metric using schedular, the metric is not refreshed , nor schedular return any error. But when checked in metrics proparties, the last refresh date is not changed, niether the values are updated.
Whe I try to refresh the metric manual, the values are refresh.
Please help me to troubleshoot the problem of refreshing metric through schedular.
Thanks,
Regards
Sachin Dalal

Post Author: jezbraker
CA Forum: Performance Management and Dashboards
Scheduler is pretty horrid for refreshing metrics.Better of to use the Rules engine and create a rule thats based on a schedule that based on condition (1=1 works well ) then refreshes metircs.troubleshooting is best done with the trace options in setup/parameters.there are a few other ways or seeing what the schedulers up to - but id stick to rules if i were you.

Similar Messages

  • Have double bar and can not refresh the page.

    I've been trying to get the double line out but no such luck. Can not see enough of the line to find anything of the other/ refresh / etc. lines of the task bar.

    thanks for marking the question answered, it wiil help others
    Enjoy the phone

  • Youtube can not refresh

    The Youtube in my 3rd generaion Apple TV can not refresh the content of the channels I subscribed. And the Youtube shows only 5 of my favorite videos. But the situation above does not exist in my iphone and ipad. How can I solve these problems?

    Hi,
    In addition to the above information,
    Checkout the below thread for similar discussion,
    http://social.technet.microsoft.com/forums/windowsserver/en-US/a700e9f6-4491-4c70-8bd0-d9d3111e2f70/windows-reboot-error
    Regards,
    Gopi
    JiJi
    Technologies

  • Can not refresh server manager Error:0x8007045b

    OS: Windows 2012 R2 Core
    Services: Hyper V
    I was trying to remote reboot and the session hung. No worries I decided I could just reboot the next morning. So I rebooted the next day but when I go into server manager I get
    an errror can not refresh server manager Error:0x8007045b. Did some research found suggestions to fix it using a DISM.exe /Online /Cleanup-image /Restorehealth.
    But then I get an error 1115 A system Shutdown is in progress. I attempt to fix this issue using pskill winlogon but the issue pursistest. I have restarted the server several times now. Not sure how to fix this.
    Thanks in advance,
    Jake

    Hi,
    In addition to the above information,
    Checkout the below thread for similar discussion,
    http://social.technet.microsoft.com/forums/windowsserver/en-US/a700e9f6-4491-4c70-8bd0-d9d3111e2f70/windows-reboot-error
    Regards,
    Gopi
    JiJi
    Technologies

  • Can not refresh page after save properly(When not saving master record)

    I am using jdeveloper 11g R2 (11.1.2.3) JSF Facelet
    In some use case I have Address as master table and Person as detail table
    For some business reason I need to don't save same addresses
    eg:
    If +1 Test St+ is in database already and new user coming and adding this address with new person
    I need to use the row in database not creating a new address
    I do saving in doDML method of Address with some hashing algorithm and it is fine
    My problem is that I can not refresh page after save properly
    User coming to page think Adding a new address and a new person but in fact no new
    address added because of business I describe above
    Any ideas how I can implement this?
    Appreciate that
    Regards
    Mohsen

    Hi,
    from your description it is not clear why the page doesn't refresh. It could be a problem in your implementation code - who knows. What if you perform the address check on a command button that actually submits the new address? If the check returns true (address exists) you would call row.refresh(forget new row); and re-query the view object so the address coming from the database is displayed. If you wanted to use the doDML then yuou need to be aware that doDML doesn't help removing the row the user created. It just ignores the database update but the entity is still around, which in my suggested solution wont be the case.
    Frank

  • Can not refresh snapshot changes after importing data of master site

    Hello !
    I have two database computer,one as master site,one as snapshot site.Because the error of the hard disk of master computer,I use the exporting data file to recover my database.after importing ,I found I can't refresh the refreshgroup on snapshot,who can tell me why?
    thinks in advance!
    (exp system/manager full=y inctype=complete file='/home/save/backdata/xhsdcomp.dat')
    (imp system/manager inctype=system full=Y file='/home/save/backdata/xhsdcomp.dat'
    imp system/manager inctype=restore full=Y file='/home/save/backdata/xhsdcomp.dat')
    null

    You haven't listed the errors that you're receiving when attempting to refresh your refresh group, but if your snapshots are attempting to fast refresh, I suspect it's because the creation timestamp of the snapshot log on the master site is newer than the creation timestamp of the snapshot. In this case you will need to do a complete refresh of the snapshot (or drop and recreate the snapshot) before you will be able to fash refresh it again.
    If this is not the case, please post the errors you are receiving when you attempt to refresh the refresh group.
    HTH,
    -- Anita
    Oracle Support Services
    null

  • The report can not retrieve the data from the DB

    Dear all,
    I am facing a problem is that i have ready designed reports in Crystal. While refreshing the report in Crystal, it gives an error that it can not retrive the information from the database. But, if i am using the application which the report is attached, it is giving me the results and showing the report in Crystal. Even, for testing if i add a new field, i have to run it from the application, but directly from the Crsytal Reports, it displays an error.
    I hope you will help me in the issue.

    Could you please provide more information:
    What is the database? (Oracle, SQL Server, xml, etc.)
    What type of connectivity? (ODBC, Native, OLE DB, etc)
    Are application and Crystal Reports are running from the same machine?
    What is the error message? Any error numbers?

  • Why??? Simple snapshot can not refresh automatically, but can refresh manually.

    Server 1 : Oracle 7.3.4 (as a Master site)
    Server 2 : Oracle 7.3.4 (as a Snopshot site)
    Client PC: SQL*Plus (Oracle 7.3.4 Client)
    Step 1: on Client PC, start 2 SQL*Plus dialog Windows,
    one(Window A) for <Server 1> , another(Window B) for <Server 2>;
    Step 2: on <Window A> do:
    SQL>connect scott/tiger@Server1
    SQL>CREATE SNAPSHOT LOG ON scott.dept ;
    SQL>select * from dept;
    DEPTNO DNAME LOC
    10 AAAAAA AAAAA
    20 BBBBBB AAAAA
    30 CCCCCC AAAAA
    Step 3: on <Window B> do:
    SQL>connect scott/tiger@Server2
    SQL>CREATE DATABASE LINK oracle USING 'Server1';
    SQL>CREATE SNAPSHOT all_dept REFRESH fast
    start with sysdate NEXT SYSDATE+1/(24*60)
    AS SELECT * FROM scott.dept@oracle;
    -- refresh interval: 1 minute
    SQL>select * from all_dept;
    DEPTNO DNAME LOC
    10 AAAAAA AAAAA
    20 BBBBBB AAAAA
    30 CCCCCC AAAAA
    Step 4: on <Window A> do:
    SQL>insert into dept values (50,'MMMMMM','NNNNN');
    SQL>commit;
    SQL>select * from dept;
    DEPTNO DNAME LOC
    10 AAAAAA AAAAA
    20 BBBBBB AAAAA
    30 CCCCCC AAAAA
    50 MMMMMM NNNNN
    <one or two minutes later ... ... >
    Step 5: on <Window B> do:
    SQL>select * from all_dept;
    DEPTNO DNAME LOC
    10 AAAAAA AAAAA
    20 BBBBBB AAAAA
    30 CCCCCC AAAAA
    conclusion: Simple snapshot can not refresh automatically ???????
    SQL>exec DBMS_SNAPSHOT.REFRESH( list => 'all_dept',method => 'F');
    SQL>select * from all_dept;
    DEPTNO DNAME LOC
    10 AAAAAA AAAAA
    20 BBBBBB AAAAA
    30 CCCCCC AAAAA
    50 MMMMMM NNNNN
    conclusion:Simple snapshot can refresh manually.
    How to solve this problem?????
    Thank you very much
    Zhang Ming-an

    When you are manually refreshing the snapshot as scott/tiger, and your database link was defined with a 'connect to/identified by ' clause, your login credentials will be scott/tiger. When the refresh happens from the job queue, it does not use those credentials, It uses some default set. What you should probably do is:
    1. create public database link Oracle using 'server1';
    2. as scott/tiger, create database link Oracle connect to scott identified by tiger;
    3. your automatic refresh should work now.

  • (SOLVED)Problems during installation, can not refresh package database

    I have been using Arch for a year (dual boot) but for some reasons I had to do a reinstall. It worked fine, but I did some things wrong and I had too reinstall (again, befor even entering the system).  This time (and all the other times i've tried today) I can not complete the "select packages" step, it either freezes at "Refreshing package database" or gives me a message that it just can not be done (sorry, I do not have the exact words atm). I have internet and I've been trying a million different mirrors (including the one I used when it worked). What to do, what to do?
    Worth noting is that I had the same problems a year a go, but it solved it self, no idea what I did then.
    I would really appreciate if some one knew what was going on - it is driving me crazy beyond comprehension!
    EDIT: maby this should have been pasted in the installation section?
    EDIT2: Title
    Last edited by elprofundo (2011-12-18 16:15:29)

    I am sorry, it is during the installation and no command is in use (correct me if I'm wrong) - the tty7 is just reading "Synchronizing package database", the last times i've tried it didbn't 't continue for hours, other times it gives me an error message (which I haven't written down, sadly). I'm trying again atm.
    EDIT: The error message I get is just
    "error: failed retrieving file 'core.db' from mirror.optus.net
                 //                                           mirrors.kernel.org : Connection timed out
    Last edited by elprofundo (2011-12-15 21:47:59)

  • Deleting the Row from the table is not refreshing the contents in the form

    Hi,
    We developed a table and form in the same UI based on the following suggestion.
    Display and edit currently selected row of ADF Table in ADF Form
    1. Created one view object based on the employees table.
    2. dragged the view object to the UI as table.
    3. dragged the view object as form.
    4. set partial triggers on the form's container (panelformlayout) as tableId.
    Tested the application with the edit options and everything is working fine. But the problem comes when we delete the record from table. it is not refreshing the form based on the newly selected row after deleting the record. If we commit the data the form contents are updated to the selected row (which is not desired).
    Can you please suggest how to fix the issue, refreshing the form with the selected row after deleting the records.
    Thanks and Regards,
    S R Prasad

    The Code snippet looks fine. I think, the issue is in the partial trigger setting
    4. set partial triggers on the form's container (panelformlayout) as tableId.In order to the table to get refreshed, the table's partialTriggers property should be set to id of the delete Button.
    Go to table, select partialTriggers in the Property Inspector, Click on Expression Builder at the right and select the delete Button.
    Can you set this and check?
    Sample Code:
    <af:panelHeader text="panelHeader 1" id="ph1">
    <f:facet name="context"/>
    <f:facet name="menuBar"/>
    <f:facet name="toolbar">
    <af:commandButton text="Delete" id="cb1"/>
    </f:facet>
    <f:facet name="legend"/>
    <f:facet name="info">
    <af:table var="row" rowBandingInterval="0" id="t1"
    partialTriggers="::cb1">
    <af:column sortable="false" headerText="col1" id="c1">
    <af:outputText value="#{row.col1}" id="ot1"/>
    </af:column>
    <af:column sortable="false" headerText="col2" id="c4">
    <af:outputText value="#{row.col2}" id="ot3"/>
    </af:column>
    <af:column sortable="false" headerText="col3" id="c3">
    <af:outputText value="#{row.col3}" id="ot4"/>
    </af:column>
    <af:column sortable="false" headerText="col4" id="c5">
    <af:outputText value="#{row.col4}" id="ot2"/>
    </af:column>
    <af:column sortable="false" headerText="col5" id="c2">
    <af:outputText value="#{row.col5}" id="ot5"/>
    </af:column>
    </af:table>
    </f:facet>
    </af:panelHeader>
    Thanks,
    Navaneeth

  • Help! pagecentent.setAttributes, IE can not open the site

    Hi there,
    I have some scriplets in my jsp file.
    I the scriplets I used pagecontent.setAttribute("varname", varvalue) so that i can use varname in my jstl code.
    My jsp file is about getting some image file and print its string format.
    I run the url and it works at first, but after load the page several times, I got the error messge:
    Internet Explore can not open the site http://....
    I click refresh, sometime it works, some time not. The more times I load the page, the more often the error shows up.
    Does anybody have any ideas about this error?
    Does mix scriplet var with jstl var often cause problem?
    Thanks a lot.

    i think you might have to give a bit more detail...its easy to mark this as a IE configuration problem the way you have it....caching? does it behave differently if you 'click refresh' or hit F5? seems stupid but F5 always does a true page refresh. links and the refresh button seem to grab from cache even when they're not supposed to. i've also dealt with annoying proxy servers that ignore the response.setDateHeader ("Expires", 0); directive.
    i apologize if i'm on the wrong track, but any sort of java errors would usually show up in a log or something...see if you can find that to debug any syntax problems.

  • Getting "Can not open the file due to unknown error(FRM:0007)"

    Getting "Can not open the file due to unknown error(FRM:0007)", when refreshing the local copy of Deski report  from user docs.
    Any assistance
    Thanks,
    Sasi.

    Hi Sasi,
    One of the reason for this error is corrupted universe.So you can try following steps and restore copy of universe and then try to import this universe and check whether it works.
    1.While importing a universe, a temp file is created in the users local settings temp directory.
    2. For example C:\Documents and Settings\brijones\Local Settings\Temp\0dd0b0a7 .
    3. File has no extension is relatively the same size as the original universe file.
    4.Rename this file to original universe name.
    I hope it helps.
    Regards,
    Snehal

  • Why I can not view the CMP bean created tables in cloudscape?

    Hi:
    I have deploy a CMP entity bean which will automatic create a table named ToolBeanTable.
    I can find the table exist in cloudscape and its structure thought JDBC tool.
    But I can not view the data, the error is said that the table is not existed.
    Why?
    Thanks!
    John Lee

    Hello,
    I also had the same problem when I am using Microsoft SQL Server Management Studio 2012. I created a new table.  When I select * from mytable, it can execute and I can see the table in the results part, but I can localize the table in left part "database"
    menu. Actually, I suspect there is something missing in the Databases folder. When I am using SQL management studio in another machine, I can see a folder called tables under Database, which hold all the newly created tables. But I could not find it here.
    On bottom, it may indicate the table is in "master" folder, but I can not find it either. Within "master" folder, there are "Views", "Synonyms", "Programmability", "Service Broker", "Storage", "Security" I already refreshed the Databases folder several times.
    Can anyone kindly help me?
    Thanks,
    Feifei

  • Firefox does not refresh the page after posting on IPS forums

    I visit the forums at www.sailinganarchy.com. After replying to a post firefox does not refresh the page to show that the post is posted. But I open IE and I can see that the post is posted properly.
    I am using FF 3.6.8 and this issue has only started in the last few days.
    I am
    == URL of affected sites ==
    http://

    You can try these steps in case of issues with web pages:
    You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
    *Hold down the Shift key and left-click the Reload button
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Command + Shift + R" (Mac)
    Clear the cache and cookies only from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    You can also check the Web Console (Firefox/Tools > Web Developer) to see if there are specific error messages.
    *https://developer.mozilla.org/Tools/Web_Console

  • I can not get the debugger to work on oracle studio 12.3 - It will not attach

    I can not get the debugger to work on oracle studio 12.3 - It will not attach

    APN for Tmobile is epc.tmobile.com
    MMSC is http://216.155.174.84/servlets/mms
    Here are the instructions:
    Create devel catalog (appl from this catalog can damage your phone but don't have to so if you are not sure about your needs or skills dont use it and wait for official applications from Nokia or firmware update) The software hosted in Extras-devel is NOT ready for normal users! PLEASE PLEASE PLEASE don't play with it unless you really know what you are doing. Be ready to file proper bug reports instead of posting complaints. Expected problems: crashes, battery drain, poor system performance, full disk space & more - SERIOUSLY! Don't play with Extras-devel if you haven't backed up your data or are prepared to re-flash your device.
    Application manager --> Application catalogs --> New
    Catalog name: Extras-devel
    Web address: http://repository.maemo.org/extras-devel
    Distribution: fremantle
    Components: free non-free
    Refresh catalogue
    Install fAPN and fMMS
    Run fAPN and create new APN with MMS setting which you can get from your operator or find on this page (this may not be needed for all users, see note below)
    Run fMMS and it will start with configuration
    Put APN name the same you named your MMS APN point during fAPN configuration
    Type MMSC which you can take from your operator
    Type your number starting with +
    Put max size of pics you want to have in outgoing MMS
    Save all and start sending MMS from fMMS menu.
    It is very important to put correct setting in new APN and be sure if there is proxy needed in your operator.
    WHEN YOU GO TO MMS to set your configuraions, the information should look like this
    MMSC: http://216.155.174.84/servlets/mms
    Resize Image: 300
    Your Phone Number: +##########
    NOW U ARE DONE!! =)

Maybe you are looking for