Can not Replicate Hyper-V machines located on ISCI disk

Hi ,
i had 2 hyperV 2012R2 servers ,and attached iscsi disks to this servers (with multipath ,lacp)
one of them is primary and the other is secondary server.
i had installed 2 Virtual machines to our primary HyperV server as vm1 and vm2 .The vm1 is located on local disk of the HyperV ,and the vm2 is located on the disk which is ISCSI connected to HyperV server.
i can succesfully replicate the vm1 ,but could not replicate the vm2 (located on ISCI disk) to HyperV secondary server.
And it gives me this error.
Any help??

Hi!
According to the error message in your screenshot, the VM is in a state that prevents replication.
I'm not entirely up to date on replication in 2012 R2, but in Hyper-V 2012, replication relied heavily on taking snapshots. Taking snapshots on disks other than vhd/vhdx is not supported.
If you wan't to replicate a VM with iSCSI storage attached, you will need to disable the Backup (VSS) integration service. Given that the replication procedure remains the same in 2012 R2 as it did in 2012.
Here is a similar case on Hyper-V 2012 :
https://social.technet.microsoft.com/Forums/en-US/5e7b283f-00c6-4089-8c16-5973dc233a09/windows-2012-hyperv-enable-replication-failed-due-to-iscsi-disks?forum=winserverhyperv
Furthermore, checking permissions in the security tabs on all involved locations is also a good place to start.

Similar Messages

Can not register a new machine with Updatemanager

Hi,
I just install a new machine with Solaris 10 using a Flash image and Live Upgrade. The original machine from we create the Flash image was registered succesfull using Update Manager.
Now, when I try to register the new machine, the applications ask me the user and password, but do not makes anything. The dialog freeze. The only way to stop the Update Manager is killing them (at the end is the full java error stack).
I try with sconadm,
sconadm register -a -r /var/tmp/registration.profile
Unsuccessfull too, with the same stack error (Caused by: javax.management.InstanceNotFoundException: ).
I'm bored with the Solaris patch system: all the weekend was saying error 500 for all my other registered machines, and now I can not register a new machine....
This system fails all the time.. Is runing under W2K3 server???
Any Idea?
Thanks in advance.
H.
P.S: Error stack output:
Exception occurred during event dispatching:
java.lang.reflect.UndeclaredThrowableException
        at $Proxy1.getInstanceName(Unknown Source)
        at com.sun.scn.client.SCNClientSession.login(SCNClientSession.java:371)
        at com.sun.cns.basicreg.cacao.ClientLoginCacaoAdapter.loginAccount(ClientLoginCacaoAdapter.java:209)
        at com.sun.cns.basicreg.wizard.cli.CmdLineWizard.outCall(CmdLineWizard.java:1109)
        at com.sun.cns.basicreg.wizard.cli.CmdLineWizard.output(CmdLineWizard.java:773)
        at com.sun.cns.basicreg.wizard.swing.WizardPanel.isNavigationAllowed(WizardPanel.java:1337)
        at com.sun.cns.basicreg.wizard.swing.WizardDialog.okByNavigationListener(WizardDialog.java:583)
        at com.sun.cns.basicreg.wizard.swing.WizardDialog.access$100(WizardDialog.java:64)
        at com.sun.cns.basicreg.wizard.swing.WizardDialog$NextButtonActionListener.actionPerformed(WizardDialog.java:404)
        at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
        at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
        at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
        at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
        at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
        at java.awt.Component.processMouseEvent(Component.java:5517)
        at javax.swing.JComponent.processMouseEvent(JComponent.java:3135)
        at java.awt.Component.processEvent(Component.java:5282)
        at java.awt.Container.processEvent(Container.java:1966)
        at java.awt.Component.dispatchEventImpl(Component.java:3984)
        at java.awt.Container.dispatchEventImpl(Container.java:2024)
        at java.awt.Component.dispatchEvent(Component.java:3819)
        at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
        at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
        at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
        at java.awt.Container.dispatchEventImpl(Container.java:2010)
        at java.awt.Window.dispatchEventImpl(Window.java:1791)
        at java.awt.Component.dispatchEvent(Component.java:3819)
        at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
        at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
        at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
        at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:153)
        at java.awt.Dialog$1.run(Dialog.java:535)
        at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
        at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
        at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
        at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
        at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
Caused by: javax.management.InstanceNotFoundException: com.sun.scn:name=SCNBaseServiceFactory,assetSubProfile=Factory,host=alcaudon.tsc.uc3m.es,assetProfile=Factory,scnType=ServiceFactory,Vendor=Sun Microsystems Inc
        at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.getMBean(DefaultMBeanServerInterceptor.java:1010)
        at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.getClassLoaderFor(DefaultMBeanServerInterceptor.java:1349)
        at com.sun.jmx.mbeanserver.JmxMBeanServer.getClassLoaderFor(JmxMBeanServer.java:1300)
        at com.sun.jdmk.interceptor.DefaultMBeanServerInterceptor.getClassLoaderFor(DefaultMBeanServerInterceptor.java:285)
        at com.sun.cacao.agent.DispatchInterceptor.getClassLoaderFor(DispatchInterceptor.java:548)
        at com.sun.cacao.agent.auth.impl.AccessControlInterceptor.getClassLoaderFor(AccessControlInterceptor.java:427)
        at com.sun.jdmk.JdmkMBeanServerImpl.getClassLoaderFor(JdmkMBeanServerImpl.java:1130)
        at com.sun.cacao.common.instrum.impl.InstrumDefaultForwarder.getClassLoaderFor(InstrumDefaultForwarder.java:153)
        at javax.management.remote.rmi.RMIConnectionImpl$4.run(RMIConnectionImpl.java:1308)
        at java.security.AccessController.doPrivileged(Native Method)
        at javax.management.remote.rmi.RMIConnectionImpl.getClassLoaderFor(RMIConnectionImpl.java:1305)
        at javax.management.remote.rmi.RMIConnectionImpl.invoke(RMIConnectionImpl.java:768)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:585)
        at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:294)
        at sun.rmi.transport.Transport$1.run(Transport.java:153)
        at java.security.AccessController.doPrivileged(Native Method)
        at sun.rmi.transport.Transport.serviceCall(Transport.java:149)
        at sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:466)
        at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:707)
        at java.lang.Thread.run(Thread.java:595)
        at sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(StreamRemoteCall.java:247)
        at sun.rmi.transport.StreamRemoteCall.executeCall(StreamRemoteCall.java:223)
        at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:126)
        at com.sun.jmx.remote.internal.PRef.invoke(Unknown Source)
        at javax.management.remote.rmi.RMIConnectionImpl_Stub.invoke(Unknown Source)
        at javax.management.remote.rmi.RMIConnector$RemoteMBeanServerConnection.invoke(RMIConnector.java:972)
        at javax.management.MBeanServerInvocationHandler.invoke(MBeanServerInvocationHandler.java:201)
        ... 39 more

Well,
The problem was a Memory problem: The swap file was misconfigured. Once the system reboots with the correct swap configuration I was able to register the machine.
Anyway, the problem to connect with SunSolve is continous, but it is other point of discussion.
I hope this solution can help people with similar problems.
H.

BLOB can not replicate on Network.

Can not replicate BLOB on the Network.
Here is my table script and Trigger Code.
create table StoredImages
( imageid number,
imagecontainer blob);
create table copy_StoredImages
as select * from StoredImages;
CREATE OR REPLACE TRIGGER "REPLICATE_storedImage"
AFTER INSERT OR DELETE OR UPDATE
OF imageid ON StoredImages
REFERENCING NEW AS N OLD AS O
FOR EACH ROW
BEGIN
IF INSERTING THEN
INSERT INTO COPY_StoredImages@DB_LINK (imageid, imagecontainer)
VALUES (:N.imageid, :N.imagecontainer);
ELSIF UPDATING THEN
UPDATE COPY_StoredImages@DB_LINK
SET imageid = :N.imageid,
imagecontainer = :N.imagecontainer
WHERE imageid = :O.imageid;
ELSIF DELETING THEN
DELETE FROM COPY_StoredImages@DB_LILNK
WHERE imageid = :O.imageid;
END IF;
END;
I want to replicate BLOB (Picture) Data on the network. Through is database trigger i am trying to replicate the data in another database on the network.All data is replicated but picture data is not replicated. How can i do replicate picture data on the network.
Thanks.

thanks...but, HP was NO help. I am now thinking that the problem is Bonjour and not the printer. I have tried to open safari and bonjour to see my network devices and i can not connect to my tivo either. If you have any ideas, i would appreciate it. I will now see if there is a Bonjour discussion for more help. Thanks!!!

I created a partition on my iMac drive. I have trashed the files that were in the partition but I can not trash the icon. I tried with Disk Utility. Any ideas?

I created a partition on my iMac drive. I have trashed the files that were in the partition but I can not trash the icon. I tried with Disk Utility. Any ideas?

If I understand correctly, the partition will still be on the disk and therefore mounted on the desktop. You would need to remove that partition to remove the icon.
Be careful if you try this, don't upset the main Macintosh HD partition or you may lose the OS and your files.
And always have a full tested backup of your system before modifing disk partitions.

Can not access my Time machine HD after CLEAN install Mountain Lion

Hi Everyone!
Thank you in advance for your interest and help, I really appreciate it.
I recently did a clean Install of Mountain Lion and already did all the updates that appeared. However, before doing these clean install, I did a back up with Time Machine on my external Hard drive. Now I can't access to it, doesn't even appear on my sidebar when I connect it. On the other hand it does appear as connected when I open Disk Utility, but I can not access to it. There I have all my 5 years of University works and classes, photos, and music. This Hard drive is only dedicated for my Mac Backups and nothing more.
I guess that if I install again Snow Leopard, it will work, but I have to re install everything as my Mac is a Mid or Late 2007 15-inch Macbook pro and it came with the OS before the snow leopard 10.5 or something like that.
What can I or should I do to access my Hard Drive again?
Best Regards
Edd

Hi Mende,
Sorry for my late reply but I want to thank you for your help.
I followed your instructions and now I can access the drive thank you a lot for this. However, now I don't want to restore everything from my last back-up just some files, How can I do this? Also I want to restore My iLife, but the copy I have from the CD that came with my mac doesn't allow to install it, what can I do.
Take good care, and happy holidays.
Best Regards
Edd
PD. Are you from Spain?

Vendor Master can not replicate from SAP R3 to SAP SRM system.

Hi All,
We face one issue when we use bbpgetvd program to transfer Vendor master from SAP R3 to SAP SRM, after I check Analysis Application log, found the following issue:
Error: No Bank Master Data Maintained No Bank Data Transferred
Error: Name/Address for Vendor Already Exists Vendor: 0015118743 Address Number 0000054208
Error: Warning: Complete Business Partner: Vendor: 0015118743 Backend: APP002TS No Transfer of Vendor Data
But I check BP in SRM and can not find vendor 0015118743 information, so could you give me any tips or suggestions to fix this issue. Is there any table in SRM system to keep Vendor Master like SAP R3?
Thanks for your kind suggestions or help in advnance!

Hello Gavin,
>
Gavin Feng wrote:
> (...)
> 1. How to use BP to find business partner by address num 0000054208, I did not find this search condition.
> (...)
You cannot.
Business Partner are stored in BUT000 table. I don't remember if its address number is also stored in this table.
If yes, link is done directly between both.
If not, this is the person number which is stored in BUT000. So, use your address number to get its corresponding person number using ADCP table. Then, with this person number, check in BUT000 what is its corresponding Business Partner.
Finally, with its corresponding GUID, check in VENMAP table the vendor number.
>
Gavin Feng wrote:
> (...)
> 2. I used VENMAP and ADRC to check vendor 0015118743 and address num 0000054208, but there is no record in both table, so why the SRM system generate information that is "Name/Address for Vendor Already Exists".
> (...)
See my answer above concerning ADCP table.
Regards.
Laurent.

MYSQL 55 to Oracle 11gr1 replication(oneway) - can not replicate

I have setup golden gate replication between mysql 55 and oracle 11gr1. While trying to setup the initial load, I do'nt see any data push to oracle from mysql.
What could be wrong in my setup.? has anyone tried this kind of setup? i see the the report for replicat and it says data is not replicated. while extract shows that 4 rows from table are taken for insert.

Hi Stev
I am trying to do the initial load process
On source (MYSQL 55)
database (ggtest and table test)
table test has
TEST(COL1 INT)
manager is running on default port 7809
manager parameter file is defined with (PORT 7809)
There is initial load extract (EINI01) -->
ADD EXTRACT EINI01
param file
EXTRACT EINI01
SOURCEDB [email protected], USERID ggsdev, PASSWORD ggsdev
RMTHOST 192.168.75.116, MGRPORT 7809
RMPTTASK REPLICAT, GROUP RINI01
TABLE ggtest.TEST
On target oracle 11gr1 (11.1.0.6)
Database in archive log mode, with minimum supplemental logging.
replicat process
ADD REPLICAT RINI01
Parameter file for replicat
REPLICAT RINI01
USERID ggs_owner, PASSWORD ggs_owner ( added in target database)
ASSUMTARGETDEFS
SETENV (NLS_LANG="AMERICAN_AMERICA.WE8MSWIN1252")
MAP ggtest.TEST , TARGET GGTEST.TEST;
-- to start the initial load ( mysql side has 4 rows, oracle has no row )
on source, i ran the command
ggsci> start extract eini01
I can see on report, extract has picked 4 rows for insert, but on replicat side no replication done. No error reported in gserr.log and there was a communication between source side of extract with traget side manager and sunsequently repliacat on target was started by manager and stopped normally. but no rows replicated.
Between oracle-to-oracle there is no problem. But my actual project is to setup from mysql to oracle (one way replication).
let me know if you need any other info.
Thanks
rafey

My pc can not detect my time machine formatted external hd

Help! I purchased a new western digital external hard drive(320gb)to use with both my pc and mac.
when i first attached to usb hub on my macbook pro, I answered "yes" to the question if I wanted to use the drive as time machine backup..it said that all data would be erased(none on the drive; it is new)and my contents of mac would be backed up.
I was able to tranfer some other files to the wd external drive that I wanted to transfer to my pc, but when I plug the hd into the pc, my pc does not recognize the drive under "my computer" as an external or removable drive.
If I look in the drives file under "mycomputer" it does list the wd as a drive, but I am not able to transfer files fromy my pc to the external hd or vice versa.
What am I doing wrong?

When you formatted the drive you should have created two partitions - one for TM and one for FAT32
Plugging a TM drive into a PC can hose the data on the drive. Be extremely careful
PCs cannot read HFS+ format. Only NTFS or FAT without special 3rd party software.
You might try HFSExplorer
http://ogasawalrus.com/blog/node/208
or macdrive
http://www.mediafour.com/products/macdrive/

Can not connect to Time Machine back up file after restore

After receiving my G5 iMac back from the Apple Store I had to restore from my Time Machine backup (they had to erase the hard drive). The backup seemed to go fine until it hit the "Network settings." It froze there for a couple of hours. Everything else seemed fine. I quit the back up and restarted my iMac and it seems to be doing fine. I did notice that some of my shareware programs need to have their keycodes re-entered and when I open up a program that has not run since being restored I get that warning window telling me that it is opening an application for the first time.
But here is the main issue...Time Machine doesn't recognize the previous back up file. I do not want erase the current file to start over...just in case something didn't get properly restored. I much rather just have Time Machine recognize the existing file...anyway of doing that? I do not have enough room on my external hard drive to have 2 backup files.
Thanks...Lenny

I am having a similar problem - when I updated to Mavericks the install seemed to go OK until the last minute, then it literally hung for hours. I decided to re-boot the computer. From there, it seemed like the Mavericks install was a "clean" install, and it was like setting up a brand new computer. All of my programs were kept, but it lost all of my files from finder, as well as all my e-mails, etc. When I tried to backup from Time Machine, none of the buttons seem to work, and I can't get it to work. Also, before the install my 500 GB Time Machine drive was showing almost full, now it shows about 300 MB full. I also tried to migrate the files from the Time Machine drive to the iMac, still with no luck.
Good thing I had migrated my iTunes and photos to other external drives, and I was able get those back. Losing 500 MB of photos probably would have given me a heart attack.
Any suggestions?
Arrrgh!

The Migration Assistant can not find my Time Machine Backup

Hello,
I had to reinstall Mountain Lion on my iMac. So I made a fresh backup with TM on friday, everything was fine with it.
Then I formated my HD and installed 10.8.2 from the AppStore. After setting up the Admin-Account I opended the Migration Assistant
to migrate my User Account from the TM-Backup, but it is not showing up. There are 4 backups on the Time Capsule, but only 3 are
showing up. And for sure it is mine, which is missing. :-(
When I start in Revorery-Mode and choose to set up the iMac from a Time Machine Backup, the latest Backup is from the 1. of November,
which I really don't want to use right now.
Would be very nice to get some help in here.
Thank you

No, both the backup and the new system are OSX10.6.
I'm afraid your solution doesn't work. If I go through finder and open up the folders on the backup, and try, for example, to open my "Movies" folder (which is one I dearly hope to recover), I get a message that:
"The folder "Movies" can't be opened because you don't have permission to see its contents."
I have tried Repair Permissions, but this doesn't help. All of the important folders have a little red stop sign on them.
Thanks though.

Why can not freeze book inventory Storage location and Posting block?

Hello,
I tried to freeze book inventory storage location and posting block at storage location level in SAP.
1) OMBP -> "Freeze book inventory storage' is checked at that storage location.
2) MI01 -> the 'Posting Block' and 'Freeze book inventory' in the Physical Inventory Document is checked.
3) Post the Physical Inventory Document by using MI02.
But, I am still able to post inventory movement at that storage location after executing the above.
(I run MB1C with movement type 501 at that location.
I input the material number which are in the created Physical Inventory document.
The posted manterial document is created after I run MB1C.
The document date and the posting date in MB1C are the same date of Physical Inventoery Document.
I can see this material inventory movement from MB51!! )
My question is: Why SAP is allowed to execute the inventory movement after the 'freeze book inventory storage location' and 'Posting block' are checked at OMBP and MI01 ?
Any idea?
Help me, thank you.
Regards,
Sylvia Chen

Problem solved. Thank you for all help!!

I can not save when creating new location i see this error

I CAN N'T SAVE when creating new location i see this error
hi all
when log in to hr responsability and go to location and want to create new location i fil all mandatorey data
and when save new location it can n't save and this error appear below in the tolbar
FRM-40735:ON-INSERT trigger raised unhandled exception ORA- 29273.
have any one can help me to solve this error
my application details
apps 12.1.1 vision instance in hr responsability
also the same error when crating the location in payables respobsability

To implement the solution, please execute the following steps:
1. Go into the responsibility: System Administrator
2. Navigate to Profile > System.
3. Clear the value at the Site level for the profile option IRC: Geocode Host.
4. Retest the issue.
5. Migrate the solution as appropriate to other environments.
Edited by: 793535 on Sep 23, 2010 3:35 AM

Can not replicate Java 1.4 pattern using Java 5 generics

I am trying to migrate some 1.4 code to Java 5. The code below captures the essence of what I am trying to do. Trouble is I get the following error
Name clash : The method readAll(List<XyzData>) of type Generics has the same erasure as readAll(List<Data>) of type Generics.DAO but does not override it
I sort of understand why it doesn't compile however I am unsure how to fix it, or even if I can use generics in this instance and if I can what is the syntax?
    public abstract class DAO
        public abstract void readAll(List<Data> data);
    public class XyxDAO
    extends DAO
        public void readAll(List<XyzData> xyzData)
    }I certainly need to do some more reading about this generics stuff but any help now would be much appreciated.

Without a bit more background, it's difficult to be precise, but I would imagine you want something like this (untested):
// Should this be an interface?
public abstract class DAO<T extends Data> {
public abstract void readAll(List<T> data);
public class MyDAO extends DAO<MyData> {
public void readAll(List<MyData> myData) {
}

Migration assistant can not find a time machine back-up

I'm attempting to restore data from my old mbp to my new mbp 15". I hook up my time machine back-up from the old mbp and open migration asst. Get throught the windows till it attempts to find my time machine - just hangs up here.
Any ideas to try would be appreciated.
John

No, both the backup and the new system are OSX10.6.
I'm afraid your solution doesn't work. If I go through finder and open up the folders on the backup, and try, for example, to open my "Movies" folder (which is one I dearly hope to recover), I get a message that:
"The folder "Movies" can't be opened because you don't have permission to see its contents."
I have tried Repair Permissions, but this doesn't help. All of the important folders have a little red stop sign on them.
Thanks though.

Can not boot in safe mode or from install disk

Having major issues. MBP getting stuck at a blue screen after the gray apple screen. Tried pressing and holding shift key while starting for safe mode and still goes to blue screen. Tried holding c key and starting with sl install disk in drive and still goes to blue screen. Issue started with continous cycle back to login screen from my main user account and due to my stupidity of turning on automatic login from a admin test account (thinking I could trick it), I am now in this vicious cycle.
And no I don't have a bootable clone. I just updated to SL and like an lazy idiot didn't go ahead and make my bootable clone.
FYI I do have a timecapsule with a week old or so backup.
Any suggestions?

having a time capsule with TM backups is certainly good. you can always restore your system from it in a pinch.
do you have a firmware password set perhaps? it would preclude booting in safe mode or from the dvd using "c". reboot and hold option at the chime. this should boot you into startup disk manager where you can choose to boot from the DVD.
if you do have a firmware password set it will ask you to enter the firmware password before letting you use the startup disk manager.

Can not Replicate Hyper-V machines located on ISCI disk

Similar Messages

Maybe you are looking for