Can not restore my Ipad 2
Hi all
Please help. I tried to update my Ipad 2 to IOS 6 , but I dont know what happed , I saw the apple logo and the loading bar moving ,so I left it there . When I got back to it was blank , so I turned it on and the plug into itunes logo appeared . So , I plugged it into the computer and Itunes said ipad in recovery mode , so i clicked update and restore , then the loading bar came up on itunes , nothing came up until it finished and then , Itunes says it got disrupted , check your wifi connections and try again later . my connections are always five bars and i did not do anything when it was updating , it tried about four times but it said that every time .
Please help , I will do anything to see the homescreen again.
iPad Recovery Mode = http://support.apple.com/kb/ht4097
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work.
Similar Messages
-
I can not restore my ipad, its giving the message
I can not restore my ipad its giving the message : The Ipad could not be restored, an unknown error has occured (1)
Hi ..
Instructions for you here > iOS: Unable to update or restore -
I can not restore my I Pad my i pad is an I Pad 2 Error 1611 shows up every time i try restoring. Can someone please help!!!!
Not sure if you've seen this kb...
http://support.apple.com/kb/TS3694#error1611 -
I needed to restore my iPad but I can not back up from my iCloud as it is asking for the password of an old ID. It has been some time since I changed the ID and all seemed to work fine..... I have lost all my content unless I get this back - please help!
Sync with new computer
https://discussions.apple.com/docs/DOC-3141 -
I can not restore my ipad because I don't remember my password
I follow the instructions for restoring my ipad but it still does not work because it say's I need to put in my password. Well, I don't know my password that's why I'm trying to restore it. I need help please
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary. -
TS3694 I can not restore my ipad after an update
I tried to do my update on my ipad and it went into restore mode. I can't restore it after I had it plugged into the computer and it went on the apple site. Can anyone help?
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
Can not restore the ipad error 14
I have tryed several times to restore my Ipad and get the new software version, but i receive a message error 14
Have you found out how to fix this issue yet? I am still having this problem.
-
Good day!
IPad 2 3G 32 GB
there is such programs, in which the screen does not go out when idle and continue to live their lives and conserving device, like a week ago so left and forgotten in a day no matter how much tried to include not turn on when the system is charging appears to connect to itunes.
Now it does not start at all, can only be translated into DFU (HOME POWER 10 sec, then HOME 10 sec), the firmware was 5.x, I do not remember.
connected to itunes, trying to restore (PC with win 7 x64), removed the antivirus, firewall turned off, the error 1602 to latest firmware (6.1).
Sew while trying to previous official firmware using "SHIFT restore" - Error 1394
Sew tried to MACBOOK, the same mistake in 1602 to the latest firmware.
tried the above on WiFi or directly via ethernet.
read different forums, clean file hosts, back returned the 74.208.10.249 gs.apple.com to hosts, test it on a software update itunes and Windows, running the test in itunes, changed only the error number - 1602, 1601, 1600
do not want to put different jailbreak, like the official standard firmware, so that was or the latest firmware (6.1).
help advice what to do next, such as the standard operation of the recovery, the official firmware and it fails.
I NEED HELP!!!
Regards, D-A-NHi imobl,
Thanks for the reply.
My issue is that I never actually backed up contacts or camera roll to any program like outlook or image viewer etc. Contacts and photos were just kept on the phone. I have been able to view the itunes backup file that is on the computer. The backup file has all my contacts and images on there.
Are there any ways to get these contacts and images back into my ipad 2?
(I have tried to import the contacts files from the itunes backup file into outlook but outlook does not understand the format.
I have also tried to import the picture files from the itunes backup file into Irfanview but Irfanview doesnt understand the format either)
I just realised I wrote the iphone model incorrectly. It was a 3 (not 3g) so I wasnt able to track it unfortunately as it was not able to connect up to Icloud etc -
I have the iPad Air when you attempt to run appear an apple and does not work and when you attempt to restore it shows the error 17 and some times 2005 what can i do
Hey Sohaib99,
Thanks for the question. You can check for information based on restore errors in the following resource:
Resolve iOS update and restore errors - Apple Support
http://support.apple.com/en-us/ts3694
Thanks,
Matt M. -
I can not restore my IPad and I can not update it . I tried with ITunes and with the device as well
Any help. PleaseIt really helps if you describe what is happening, otherwise there is no way to offer meaningful suggestions. Just saying "I can't ..." Doesn't tell us anything helpful.
-
After installing iOS7 I was prompted to make a passcode, I did so and stupidly forgot and now continually am disabling my iPad, ways in which I have read you can sort this is restoring your iPad, however I can not restore without iTunes telling me I need to go onto the iPad and turn off FindMyiPhone! How else can I sort this? It is logged into my apple account and everything! This is an iPad 2 also ASAP help!!
Hello shanefox,
This can be done by logging in at iCloud.com and removing your device via the Find My iPhone web interface.
iCloud: Remove your device from Find My iPhone
http://support.apple.com/kb/PH2702
Cheers,
Allen -
Ipad won't start; trying to restore thru itunes, but get the message - can't restore because ipad is not set up. It was set up and has been in use for about a year. What do I do now?
I Have seen people report this issue when they try to sync their devices but in never seen it when trying to restore an unresponsive iPad. I would sguggest trying recovery mode now.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
This procedure will totally erase the iPad so I hope that you have a backup that you can restore from....assuming that it works, that is. -
HT201210 what is - can not restore ipad due to error code 2006
trying to figure out what error code 2006 is - it is not one listed and I can't restore my ipad to factory settings
It is listed, you just sort have to play around on the support site in order to find it.
Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service. -
My ipad wont switch on and i can not restore it...help?
My one week old ipad Air has frozen and now wont switch on. I have tried to restore it by holding down the button but nothing happens, when connecting it to I tunes, I can not restore it as it wants me to turn off the find my ipad which I can not turn it on to do and holding down the button and whilst plugging the usb cable in is doing nothing??
Could anyone help please?FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary. -
HT201210 After update I can not access my ipad 2? Restore won't work get unknown error 3004
After update I can not access my ipad 2? Restore won't work get unknown error 3004
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
Cheers, Tom
Maybe you are looking for
-
VA01-VA02 : Error message in a user exit / MV45AFZB
I everyone, i want to add an error message in the exit "USEREXIT_CHECK_VBEP" (MV45AFZB) but when i do so it displays the following abend message : "Incorrect index structure for table XMVERF_POS /0000000222 /000030 " (V1322). just after mine. do y
-
A/P invoice with discount copied to A/P credit note gives error.
I am using SAP B1 2005B version. When I try to create a A/P credit note based on an A/P invoice which has some discount amount. the system gives a message to specify the G/L account. but if I try to specify the G/L account entry field is greyed out.
-
Possible Bug in iOS 8 via Streaming iTunes Video results in lost storage space?
Hi looking for suggestions or help on this issue if you can. I'm not sure if the issue is my attempting to stream a movie from iTunes under iOS 8 or if it is a result of the iOS 8 update (size) itself or some type of memory leak or inability of memor
-
Is there any way to add a text variable in Illustrator CS3?
To keep track of our proofs, I have a text box in Illustrator with the date and time that I would like to automatically update everytime I save the file. This is possible in InDesign by inserting a text variable. Is there a way to do this in Illustra
-
It makes it much easier for me and my family if the commonly useed icons such as Refresh, Bookmarks, back, forward, history and stop are coloured. Firefox 4.0 has all of these in a grey-black shade. I would like to be able to change the colurs of the