Can not retrieve data source status

I have 3 DPS (6.3) running fine with 3 (6.2) DS downstream, running fine as well, on RHAS 4 U4 .
I don't understand why the DPS console always report it can not retrieve the data sources status. I checked the DS access logs, and I see each DPS
default monitoring request (on the "" DN) every 30 seconds, which returns one entry, and no obvious error in any DPS or DS error log .
Any idea ?

Hi,
it looks like a a known problem to me that may appear in the following situation:
In somes cases, the proxy and the DSCC (console) uses different hostnames: For instance, the proxy may be registered to the admin framework as myhost.sun.com and the proxy itself may use only myhost. Operation status is exposed by the proxy as an LDAP entry with dn cn=myhost,.....,cn=monitor. When there is a naming mismatch, the console search for cn=myhost.sun.com,...., cn=monitor and can't find the entry, so the status is unknown.
Don't know if you are in this situation but it might worth checking this.
Hope this helps
-Sylvain

Similar Messages

Can not retrieve data in Crystal Report

Hi,
I have a problem to load data from Crystal Report in an SBO form with the ActiveX DI object : the Crystal Report Viewer message display : 'Failed to retrieve data from the database. Details [Database Vendor Code:208]'
It seems do not change the name of database in SQL Crystal Report query : My SQL query in Crystal Report file is a generic query : it must run with all custom database with the same datatable ; so the database name in FROM clause must be change with the SetLogonInfo : but it do not run !
Have you an idea ?
Francis
Here my code :
Public Class frm_CRViewer
' Adding References of project : CRAXDRT and CrystalActiveXReportViewerLib11
Private WithEvents MRO_CRV As
CrystalActiveXReportViewerLib11.CrystalActiveXReportViewer
Public Sub New()
Dim msa_Form As SAPbouiCOM.Form
Dim dsa_ActiveX As SAPbouiCOM.ActiveX ' Item <ActiveX> from form XML
dsa_ActiveX = msa_Form.Items.Item("axCRV").Specific()
dsa_ActiveX.ClassID = "CrystalReports11.ActiveXReportViewer.1"
MRO_CRV = dsa_ActiveX.Object
' Create the crystal application
Dim dob_ReportApp As New CRAXDRT.Application
' Open the report
Dim dob_Report As New CRAXDRT.Report
dob_Report = dob_ReportApp.OpenReport("c:MyTest.rpt")
' Defined to log on to the data source, and change the database name in FROM clause
Dim dob_Table As CRAXDRT.DatabaseTable
For Each dob_Table In dob_Report.Database.Tables
dob_Table.SetLogOnInfo("192.168.2.10", "AeroOneDemo", "sa", "45dfrfg5")
Next
' The report have a parameter in the sql query
dob_Report.ParameterFields.Item(1).DiscreteOrRangeKind = CRAXDRT.CRDiscreteOrRangeKind.crDiscreteValue
dob_Report.ParameterFields.Item(1).AddCurrentValue("15")
' Display the report in SBO form
Title = pst_ReportName
MRO_CRV.ReportSource = dob_Report
MRO_CRV.ViewReport()
End Sub
End Class

Try these ...
<a href="http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2002650&sliceId=&dialogID=7002531&stateId=1%200%207004328">http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2002650&sliceId=&dialogID=7002531&stateId=1%200%207004328</a>
or
<a href="http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2000957&sliceId=&dialogID=7002728&stateId=1%200%207004460">http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2000957&sliceId=&dialogID=7002728&stateId=1%200%207004460</a>
or
<a href="http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2001075&sliceId=&dialogID=7002728&stateId=1%200%207004460">http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2001075&sliceId=&dialogID=7002728&stateId=1%200%207004460</a>
or
[url=http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2003637&sliceId=&dialogID=7002728&stateId=1%200%207004460]http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2003637&sliceId=&dialogID=7002728&stateId=1%200%207004460[/url]

A Power User Can Not Send Data - BPC Release 7.5.112.07 MS

Hi BPC Community,
We have a group of users who are able to send data to locked dimensions. We added a new power user and this person can not send data to locked dimensions (see attached screen-shot). The person is checked box as a "leader" in the Teams responsibility.
Any suggestions?
Thanks. Barry

Hi
Options
• All = any user with member access write privilege
• Owner = only users assigned as owner with member access write privilege
• Mgr = Owner of parent dimension member is manager of child dimension member
• Locked = no user regardless of authorization.
Controlled By: Determines who can select the work status code
• Both = owner of the specific member ID and the owner of the parent to the specific member ID
• Owner = owner of the specific member ID
• Mgr = owner of the parent to the specific member ID.
also go through below link
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2064bb40-ea48-2e10-069c-cc6878a0f1cc?QuickLink=index&…
https://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=5&cad=rja&uact=8&ved=0CEIQFjAE&url=https%3A%2F%2Fhelp.sa…
Hope this will help you.
sushant

Can not receive data 10054

My version of Essbase is 6.5.1.4. On the server machine it self when I am adding members to outline I get "Can not receive data 10054". To resolve this problem I tried to increase the server page file size but the problem persist.Does anyone know a solution to this problem?SAK

How exactly are you retrieving data; is it smartview, excel addin, forms, reports etc ?

Can not extract data into BW from SQL SERVER

Dear All,
I meet a problem to extract data from database(MS SQL Server 2000(sp3)) into BW now and can not extract data into BW ODS, even PSA, In the monitor, display yellow light(0 from 0 record), detail message just display message "data request arranged" "confirmed with: confirmation" in requests(message) step; "missing message: request received" in extract (message) step; "no data" in processing(data packet) step and so on. but in fact, there are two records in my database test table and DB connection is OK. Even I can extract data from another test oracle database into BW ODS successfully.
Our BW system has two BW applicaton server and use oracle database. the one application server locates on IBM AIX host. the another one locates on one NT server. the application server on NT server is used for data extration from MS SQL SERVER database into BW oracle database. and MS SQL SERVER and NT platform application server locate on same one host. DBSL was installed on the NT application server already. and DB connector also was created successfully for MS SQL SERVER and datasource also was generated. DBSL type is Kernel640-WIN-IA32bit-unicode. my BW system is ECC5.0/UNICODE/ORACLE. all table/view/field name of MS SQL server is upcase and have not any specific character. for example: ZDEMO etc.
wait your help.
Thanks in advance.
Billy

Hi Ravi,
Could you help me to get knowledge about the followings:
approximately how many records extracting and transfering from SAP R/3 to BIW in an organisation. for that how much time will take .
How to extract data from two are three source system to BIW. Kindly help me with step by step explanation .If any screen shots with documents pls fwd to my ID. "[email protected]"
Your help highly appreciated.
Thanks.
Hema

903/902/BC4J can't get data-sources.xml conn pooling to work in production; help

I have several BC4J ears deployed to a 903 instance of OC4J being configured as a standalone
instance. I've had this problem since I started deploying in development on 902. So it's
some basic problem that I've not mastered.
I can't get data-sources.xml managed connection pooling to actually pool conn's. I'm wanting
to declare my jndi jdbc source connection pool in j2ee/home/config/data-sources.xml.
Have all BC4J apps get conns from this JNDI JDBC pool. I've removed all data-sources.xml from my BC4J ears,
and published the jndi jdbc source in my oc4j common data-sources.xml. I've tested that this is
the place controlling the conn URL/login passwd by commenting it out of config/data-sources.xml
and my BC4J apps then throw exceptions, can't get conn.
I've set the oc4j startup cmd line with the BC4J property to enabled connection pooling:
-Djbo.doconnectionpooling=true
symptom
Connections are created and closed. Instead of being put back into the pool managed by oc4j,
what ever BC4J is doing or my data-sources.xml is doing, the connections are just being created and
closed.
I can verify this via (solaris) lsof and netstat, where I see my oc4j instance under test load
with only 1 or 2 conns to the db box, and the ephemeral port is tumbling, meaning a new socket is
being opened for each conn. ;( grrrrrrr
Does anyone have a clue as to why this is happening?
Thanks, curt
my data-sources.xml
<data-sources>
 <data-source
 class="com.evermind.sql.DriverManagerDataSource"
 connection-driver="oracle.jdbc.driver.OracleDriver"
 ejb-location="jdbc/DEVDS"
 location="jdbc/DEVCoreDS"
 name="DEVDS"
 password="j2train"
 pooled-location="jdbc/DEVPooledDS"
 url="jdbc:oracle:thin:@10.2.1.30:1521:GDOC"
 username="jscribe"
 xa-location="jdbc/xa/DEVXADS"
 inactivity-timeout="300"
 max-connections="50"
 min-connections="40"
 />
</data-sources>

I've run another test using local data-source.xml, that's packaged in the .ear. Still
pooling under BC4J doesn't work??
A piece of info is that the 903 oc4j release notes states that global conn pooling doesn't
work. Infering that the j2ee/home/config/data-sources.xml data sources aren't pooled or ??
I just tested so called local connection pooling, where I edited the data-sources.xml that
gets packaged in the ear, to include the min/max params and re-ran my test.
Still, the AM creates a new conn, it's to a new socket, and closes the conn when done. Causing
each conn to not be pooled, rather opened then closed to the DB box. As verified with lsof and
netstat, checking the ephemeral port # on the DB box side, always changes, meaning it's a
new socket and not an old pooled conn socket.
???? What the heck??
Surely if the AM conn check out / return code works properly, OC4J's pooling JDBC driver would
pool and not close the socket??
Has anywone gotten JDBC Datasource connections in BC4J to actually be pooled under OC4J??
Since I couldn't get this to work in my early 902 oc4j testing, and now can't get it to work
still under 903 OC4J, either it's my config or BC4J AM's code or OC4J?
Any thoughts on how to figure out what's not configed correctly or has a bug?
Thanks, curt

I can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name

can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name. My original external has an error and needs to be reformatted but I dont want to lose this informations its my entire Itunes library.

Sounds like the source drive is formatted as case sensitive and the destination drive is not. The preferred format for OS X is case insensitive unless there is a compelling reason to go case sensitive.
Why can't you change the filename? Is it because the source drive is having problems? If so is this happening with only one or two or a few files? If so the best thing would be to copy those over individually and then rename them on the destination drive.
If it is more then you can do manually and you can't change the name on the source you will have to reformat the destination as case sensitive.
Btw this group is for discussion of the Support Communities itself, you;d do better posting to Lion group. I'll see if a host will move it.

Logon Error:Could not retrieve the source file for Port "Main"

Hi All,
We have a port which is blocked due to structural exceptions.When i try to connect to the Exceptions folder
"Main[Exceptions]" the import manager throws an error "Logon Error:Could not retrieve the source file for port "Main".
Any help greatly appreciated

Hi ,
Thanks for your reply.
This is what I see in the log file in the exceptions folder
These are the line I see almost to the end of the log file before they complete field mappings,value addings
 <Failure ts="2008/07/22 00:10:48.326 GMT" tid="1286" entry-no="9114" operation="Create lookups" rc="0x80000001">Illegal value for parameter</Failure>
 <Timer ts="2008/07/22 00:10:48.327 GMT" tid="1286" entry-no="9115" name="Import Lookup" total="0.040819">1</Timer>
 <Trace ts="2008/07/22 00:10:48.327 GMT" tid="1286" entry-no="9116">Import of Lookup Failed.</Trace>
But when I open the same source xml file after downloading to my local folder from Exceptions Structural folder and load manually using IM i get the status as "Ready to import".
Any Help greatly appreciated

Help Me "Data Source - Not User Data Source"

Hi All!
I have written an addon in Service Call Form To add new Matrix in this form with code as follows:
Dim oLink As SAPbouiCOM.LinkedButton
oFormServiceCall = SBO_Application.Forms.GetFormByTypeAndCount(60110, 1)
        oItem = oFormServiceCall.Items.Item("159")
        oNewItem = oFormServiceCall.Items.Add("Matrix1", SAPbouiCOM.BoFormItemTypes.it_MATRIX)
        oNewItem.Left = oItem.Left
        oNewItem.Width = oItem.Width
        oNewItem.Top = oItem.Top
        oNewItem.Height = oItem.Height
        oNewItem.FromPane = 8
        oNewItem.ToPane = 8
        oMatrix = oNewItem.Specific
        oColumns = oMatrix.Columns
        oColumn = oColumns.Add("#", SAPbouiCOM.BoFormItemTypes.it_EDIT)
        oColumn.TitleObject.Caption = "#"
        oColumn.Width = 20
        oColumn.Editable = False
        '// Add a column for BP Card Code
        oColumn = oColumns.Add("callID", SAPbouiCOM.BoFormItemTypes.it_LINKED_BUTTON)
        oColumn.TitleObject.Caption = "Call ID"
        oColumn.Width = 20
        oColumn.Editable = True
        oColumn = oColumns.Add("subject", SAPbouiCOM.BoFormItemTypes.it_EDIT)
        oColumn.TitleObject.Caption = "Subject"
        oColumn.Width = 120
        oColumn.Editable = True
        oColumn = oColumns.Add("customer", SAPbouiCOM.BoFormItemTypes.it_LINKED_BUTTON)
        oColumn.TitleObject.Caption = "Cust.Code"
        oColumn.Width = 30
        oColumn.Editable = True
        '// Link the column to the BP master data system form
        oLink = oColumn.ExtendedObject
        oLink.LinkedObject = SAPbouiCOM.BoLinkedObject.lf_BusinessPartner
        oColumn = oColumns.Add("custmrName", SAPbouiCOM.BoFormItemTypes.it_EDIT)
        oColumn.TitleObject.Caption = "Cust.Name"
        oColumn.Width = 120
        oColumn.Editable = True
        oColumn = oColumns.Add("itemCode", SAPbouiCOM.BoFormItemTypes.it_LINKED_BUTTON)
        oColumn.TitleObject.Caption = "Item Code"
        oColumn.Width = 30
        oColumn.Editable = True
        oLink = oColumn.ExtendedObject
        oLink.LinkedObject = SAPbouiCOM.BoLinkedObject.lf_Items
        oColumn = oColumns.Add("itemName", SAPbouiCOM.BoFormItemTypes.it_EDIT)
        oColumn.TitleObject.Caption = "Item Name"
        oColumn.Width = 100
        oColumn.Editable = True
And code to bind data to matrix
oDBDataSource = oFormServiceCall.DataSources.DBDataSources.Add("OSCL")
        'oUserDataSource = oFormServiceCall.DataSources.UserDataSources.Add("OSCL", SAPbouiCOM.BoDataType.dt_LONG_TEXT)
        oColumn = oColumns.Item("callID")
        oColumn.DataBind.SetBound(True, "OSCL", "callID")
        oColumn = oColumns.Item("subject")
        oColumn.DataBind.SetBound(True, "OSCL", "subject")
        oColumn = oColumns.Item("customer")
        oColumn.DataBind.SetBound(True, "OSCL", "customer")
        oColumn = oColumns.Item("custmrName")
        oColumn.DataBind.SetBound(True, "OSCL", "custmrName")
        oColumn = oColumns.Item("itemCode")
        oColumn.DataBind.SetBound(True, "OSCL", "itemCode")
        oColumn = oColumns.Item("itemName")
        oColumn.DataBind.SetBound(True, "OSCL", "itemName")
But It's error when Run at the row is bold. This error:
oColumn.DataBind.SetBound(True, "OSCL", "callID")     Run-time exception thrown : System.Runtime.InteropServices.COMException - Data Source - Not User Data Source
Please help me fix problem.
Thanks
Edited by: Tao lao on Mar 5, 2008 3:10 AM

I think, u can't bind the system table system columns to the column of the matrix in the form which is bound to the same table.(though, m not sure on this.) service call is by default bound to OSCL. If u try creating a user defined column in OSCL and then bind it, it works. but, if CallId is already bound on form, and u r bnding it one more time, it will give you error.

How can I retrieve data on a time machine if I have forgotten the password?

How can I retrieve data on a time machine if I have forgotten the password?

There are so many passwords.. which one do you mean?
TC password or disk password in the TC.. no problem.. soft reset.
Or recover the password.. via the Tesserax method.
https://discussions.apple.com/docs/DOC-3372
If you encrypted the backup in TM and have forgotten that password you are doomed.. there is no way to recover it I know of.. there is a warning.. very clear.. do not forget the password.
http://pondini.org/TM/31.html
Pink box at the bottom.

Can not find data in virtual cube

Experts,
I can not find data in virtual cube with services function module (copying Z_RS_BCT_FIGL_DATA_GET_VC10 from RS_BCT_FIGL_DATA_GET_VC10).The standard cube is maintained with data.
Can anybody tell me what could be the reasons the data is coming through Virtua cube.
Thanks,
AK

Hi,
i_basic_infoprov is the name of the provider where the data is selected from. This must be a basic provider that contains data. What I meant was, create a copy of fm RS_BCT_FIGL_DATA_GET_VC,1 maybe as Z_BCT_FIGL_DATA_GET_VC1, and enter the name of this fm in the properties of your virtual cube. For that fm it might also be a good idea to enter a default value for i_infoprov. And this should be the name of your virtual cube.
regards
Siggi

Can not get data from database

hi all,
 there is a problem , when i write like below :
SELECT * FROM bsis INTO CORRESPONDING FIELDS OF TABLE it_temp
 WHERE bukrs = p_bukrs
 AND hkont = p_hkont.
p_bukrs , p_hkont are all on the selection screen , and p_bukrs = 1200 another is eq blank. i can not find any data , but with the same condition i can find some data in database , when i debeg i found that p_hkont is initial.
 when i write like this :
SELECT * FROM bsis INTO CORRESPONDING FIELDS OF TABLE it_temp
 WHERE bukrs = p_bukrs .
this time i can find the data like the database.
 so , does someone know where the problem is , why i can not get data ?
kind regards
kevin

hi,
if u r using bukrs and hkont as parameters in selection screen then
SELECT * FROM bsis INTO CORRESPONDING FIELDS OF TABLE it_temp
WHERE bukrs = p_bukrs
AND hkont = p_hkont.
this will work.
if u r using then as select-option then the above does n't work.
bcoz select-options work as internal table bcoz of that u have use the query like this
SELECT * FROM bsis INTO CORRESPONDING FIELDS OF TABLE it_temp
WHERE bukrs IN p_bukrs
AND hkont IN p_hkont.
<REMOVED BY MODERATOR - REQUEST OR OFFER POINTS ARE FORBIDDEN>
Edited by: Alvaro Tejada Galindo on Aug 15, 2008 5:25 PM

've Password job a year ago to Mobil iPhone 4, and now lost and I can not wipe data from the device or transferred to the new device .. What do I do?

've Password job a year ago to Mobil iPhone 4, and now lost and I can not wipe data from the device or transferred to the new device .. What do I do?

iPhones require a SIM for activation.
Put the device in DFU mode (google it) and restore via iTunes.

I can not synchronize data from the prelude livelog

I can not synchronize data from the prelude livelog apparently seems to be all right, more aprasenta the following message: The Open Clip does not support XMP.
The Prelude can not apply metadata in it.
please can someone help me

Hi -
When it comes to AVCHD footage, Prelude wants to leverage the complex folder structure in order to save metadata. If the file is just the *.MTS file and is not part of the original folder structure, Prelude will report it cannot write metadata to the file. You can transcode the *.MTS to another format and then add metadata.
We are looking at future solution for what we call "naked MTS file", but unfortunately that is not part of the currently released product version.
Michael

When I was talking on phone, suddenly the phone was switched off. i tried to switch it on but it gave the message....connect to itunes for set up. when I connected it to itunes...it gave the message, itunes can not read data from this iphone, restore it

when I was talking on phone, suddenly the phone was switched off.
i tried to switch it on but it gave the message....connect to itunes for set up.
when I connected it to itunes...it gave the message, itunes can not read data from this iphone, restore it to factory settings. It also said while restoring ypu will lose all media data but you can restore the contacts.
I restored the factory settings....the phone was on recovery mode...it was verified by itunes and all that..but in the end it again said that iphone has some problem and can not function right now.
after that when ever i connect it with itunes, it gives the message, it can not activate the iphone further, try again later or contact customer service.
What to do now?????? Customer service people say..it is hardware problem

If it's a hardware problem, then the phone will need to be replaced.
There is no magic that can fix a hardware problem.

Can not retrieve data source status

Similar Messages

Maybe you are looking for