Can not run my NI-cDAQ 9191 on windows 8.1 pro while it was working fine on windows 7 - can you help me?
I am having Windows 8.1 pro - 64 bit with 8GB Ram on Laptop.
I am connecting my NI-cDAQ 9191 to the Laptop via ethernet cable.
I am running MAX. It appears under network devices.
Once I click on it the ip adddress disappear from the system setting screen.
When I click on Network setting : Network Adapters shows: No Network Adapter found!!!!
is there any solution to this problem
I turned off my firewall.
Waiting for your reply .
Thanks.
Ihab El-Sayed
You should post this issue in the Multifunction DAQ Forum as this has nothing to do with LabVIEW.
Discussion Forum:
http://forums.ni.com/t5/Multifunction-DAQ/bd-p/250
Mark P.
Applications Engineer
National Instruments
www.ni.com/support
Similar Messages
-
I am facing problem in playing yahoo pool in Firefox 4 while it was working fine in Firefox 3.6. In Firefox 4 the combination of mouse keys are not working properly.
I updated to Firefox 4.01 today and the middle scroll button on my Lenovo T400 stopped working. I downloaded the updated Ultranav utility and the Ultranav driver for my T400 from here http://www-307.ibm.com/pc/support/site.wss/MIGR-72858.html and then uninstalled the "Thinkpad Ultranav Driver" from Add/Remove programs rebooted and then installed the updated utility and driver (another reboot) and it now works perfectly.
So glad to get this working again. -
I purchased my ipad last week and my ID has been working fine until tonight. When I try to download an app or song using the ipad, it comes up with an error message saying that an unexpected ardor has occurred. I can download apps on my iPhone 4 absolutely fine..... I am quite puzzled and not sure what to do!!! I have tried switching it off and on again and that hasn't worked either. Any ideas?
Saw this on another post.
Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it! It's not happening to everyone however but they are looking into it, its really hit or miss.
In the meantime ...........
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
Cheers, Tom -
Mu external hard disk partition is not working. In get info it says that "hou can read only" bow can I fix this?
Read this:
http://smallbusiness.chron.com/fix-permissions-imac-external-hard-drive-48257.ht ml -
I have been using my iPhone 4s for a while and had no problem syncing it to my macbook pro with Lion. Suddently today it gives me a message that sync does not start. What can I do to fix this?
Oops...my phone is running 6.0.1
-
My laptop with macbook pro with maverick was working fine with a dongle AVERTV VOLARGO to capture tv programmes but now with yosmite it does not recognise what options have
I also understand that there is particular software 'TRIM' a software introduced by CINDORI SOFTWARE which will disable KEXT SIGNING a security application of YOSEMITE ,Is it the only option or there are any better options for this
-
I have mac book pro. It was working fine on my wi fi but today it doesn't show wi fi indication and my wi fi link is not mentioned in the list. but it shows other links which are not mine.
I reset my wi fi but no any result. but at the sametime my iphone is working alright on the same wi fi that means wi fi is ok. Please guide me !!!Hey nondeplume,
I'd check out the following article and see if that helps resolve the connection issues you're experiencing on your MacBook Pro:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
http://support.apple.com/kb/HT4628
Hope that helps,
David -
Hi, Can you help me I am running an iMac 10.7.5 and iPad 6.0.1 and a macair10.8.2. iCloud is syncing emails and notes but not photos. Photo streaming is switched on on the iMac. what do I need to do to stream photos?
Hi you have basicly 2 Options.
1 -if you Switch One fotostream on all 3 devices of yours which are working on the same apple id -all Fotos you Take with your iPad will be synchronized via icloud to the other 2 decvices ( w-lan and battery depending).
2- If you select foots or a whole album in iPhoto on your air or iMac and choose than puplish --> fotostream --> new or existing event you can key in a friends mail. If this friend has iCloud and iPhoto ( for iMac or MacBook ) and click on the link in the email it will download this fotos in the fotostream section in iPhoto. If he has a iPad, iPhone,... It will do it in the foto app and if he doesn't have a iCloud account at all and you choose "public web site" while publishing he can see your fotostream on a website. -
My interface -- buttons (back, forward, reload), firefox tab, groups, etc. -- does not look like the sample on your "firefox features" page. ("Groups" seems not to function at all.) I'm running the current firefox 4 download on Windows XP. Can you help?
cor-el
Thank you for your swift reply. I don't know that this has helped me, as I've reached my level of tolerance for fooling with this annoying little problem - for today anyway. It has been going on since I "up" graded to Firefox 4. My wife is running 3.6.x on her laptop with none of this foolishness. As BLASPHEMOUS as it may sound, I've gone back to IE for the time being even though I don't like it 1000th as much as I do Firefox.
Not just to rant here, I would say that I found a way to put some buttons on the right side of the toolbar that immediately gave me permission to "back, forward, and reload", but upon closing the browser and going out for dinner with the wife, I find on return that not only are those buttons NOT still on the toolbar, but I can't find them anymore. I think they were in "add-ons" found under I believe Add-On Manager.
I did also manage to achieve back/forward functionality running Firefox in SAFE mode, but this meant no No-Script, among other things, and I've grown too fond of that particular little script to give it up.
I've rebooted, restored, and reinstalled, can't get this formerly completely reliable program to work like it always has. Before looking around on here, I was beginning to think it was my PC.
THANK YOU FOR YOUR HELP, cor-el. I'm going to see if I can get on live chat on Monday.
bossman344 -
Hi,
I have copied these problem on you site, as I could explain better then what they did, wich my problem remain the same as they have. And part me explaining what is really happen to my Laptop.
''Mozilla/Firefox 4 will not SHOW on my computer SCREEN.
Firefox won't load onto my computer. I have Windows 7, and each time I try to run the program to install it, it tells me I have another version still waiting to be installed that requires my computer to reboot. When I check "yes" to reboot, my computer reboots but still no Firefox. When I try to uninstall the the old Mozilla program from my Control Panels, there is no Mozilla files or programs listed not in my list of programs but when I go directly to the Windows File on the C: Drive, there's a Mozilla program file there. WHen I go into that file check, I attempt to open the uninstall program. I get an error message that says something to the effect of: "the version Mozilla on this computer is not compatable with my OS." Something about it being and 86bit program. My Firefox 3.6 worked fine 2 days ago. What's wrong??? ''
'''Firefox 4 using huge amounts of RAM on sites with Java scripts
I have been observing Firefox using huge amount of RAM when I am on sites that use Java Scripts to rotate images. I have tried a couple of different sites and have monitored the RAM usage. With Java script enabled Firefox 4 continues to grow its RAM usage by about 10MB a minute. I have had the usage hit as high as 1.5GB. As a comparison I have monitored the same sites in Internet explorer and have not seen the same issue. - Just to eliminate a site issue.
Turning off Java Script solves the issue and eventually frees the RAM.
I am using XP Pro, 3 GB RAM. '''''
My experince with Mozilla Firefox:
Here what really happen when I install the Mozilla Firebox on my La[top you can see the file is there but when I click the program to open its does not shown on the screen but when I check with WTM (Windows Task Manager) its shows that is ON and you can only witness the laptop going very slow and I have to reboot it, and I can not install any other Mozilla :( because of the same problem and all the above.
I really need Mozilla to work as soon as possible due to important deadlines I have pendent, and i can only use Chrome but is not my ideal program. Can you help me , please ?????
Thank you
Vitor MendesIf it opens in safe mode, you may have a problematic add-on. Try the procedure in the [[Troubleshooting extensions and themes]] article.
-
The monitor on my macbook is turned off while I was working, I could not in any way to do it again, I could see through the screen off the open pages I was working on, I had to turn off the machine and restart it. and it runs. WHAT 'success? The report says the console like this: (at approximately 12.30)
No receipt for 'com.apple.pkg.JamPackWorldMusicInstruments' found at '/'.
03/05/11 12:08:30 [0x0-0x1e01e]. Com.apple.garageband [239] No receipt for 'com.apple.pkg.JamPackWorldMusicInstruments' found at '/'.
03/05/11 12:08:30 [0x0-0x1e01e]. Com.apple.garageband [239] No receipt for 'com.apple.pkg.JamPackOneInstruments' found at '/'.
03/05/11 12:08:30 [0x0-0x1e01e]. Com.apple.garageband [239] No receipt for 'com.apple.pkg.JamPackOrchestralInstruments' found at '/'.
03/05/11 12:08:30 [0x0-0x1e01e]. Com.apple.garageband [239] No receipt for 'com.apple.pkg.JamPackRhythmSectionInstruments' found at '/'.
03/05/11 12:08:30 [0x0-0x1e01e]. Com.apple.garageband [239] No receipt for 'com.apple.pkg.JamPackRemixToolsInstruments' found at '/'.
03/05/11 12:08:32 MIDIServer [255] MIDIServer [255] starting; arch = i386
03/05/11 12:34:35 com.apple.launchd [1] *** launchd [1] has started up. ***
03/05/11 12:35:06 com.apple.launchd.peruser.501 [86] (com.apple.ReportCrash) Falling back to default Mach exception handlers. Could not find: com.apple.ReportCrash.Self
03/05/11 12:35:09 com.apple.launchd.peruser.501 [86] (com.apple.Kerberos.renew.plist [110]) Exited with exit code: 1
03/05/11 12:35:25 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:35:25 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:35:26 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:35:26 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:35:32 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:35:33 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:35:33 [0x0-0xd00d]. Com.skype.skype [127] WirelessAttach: IOServiceOpen error: e00002c7
03/05/11 12:36:06 com.apple.WindowServer [64] Tue May 3 12:36:06 MacBook-Pro-17-of-Admin.local WindowServer [64] <error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint () to catch errors logged as They Are.
03/05/11 12:43:39 helpd [160] Response failed Because Listener can not find a port for this QueryID.
03/05/11 12:43:43 helpd [160] Response failed Because Listener can not find a port for this QueryID.
03/05/11 12:43:43 helpd [160] Response failed Because Listener can not find a port for this QueryID.Do you have backups of all the data on the startup drive? If not, do nothing else until you've backed up that data, if you still can.
-
Can you help with Tcode to fill this SETUP table? not working for me.
Hi,
For the datasource 2LIS_11_VASCL (SD Sales: Schedule Line Item), I need to fill the Setup Tables via OLI*BW
I understand the * to be the application number, which in this case it is 11 but I get a message that OLI11BW does not exist.
1. Can you help me with the tcode to fill the setup table for 2LIS_11_VASCL?
2. Since there are several datasources with the same application number 11, how do I fill only 2LIS_11_VASCL without filling the others:
2LIS_11_VAHDR Sales Document Header Data
2LIS_11_VAITM Sales Document Item Data
2LIS_11_VAKON Sales Document Condition
2LIS_11_VASCL Sales Document Schedule Line
2LIS_11_VASTH Sales Document Header Status
2LIS_11_VASTI Sales Document Item Status
2LIS_11_V_ITM Sales-Shipping Allocation Item Data
2LIS_11_V_SCL Sales-Shipping Allocation Schedule Line
2LIS_11_V_SSL Sales Document Order Delivery
ThanksOk,
I tried that and it basically bring you to OLI7BW as suggested above.
1. At this point, how do you know which of these it is actually filling:
2LIS_11_VAHDR Sales Document Header Data
2LIS_11_VAITM Sales Document Item Data
2LIS_11_VAKON Sales Document Condition
2LIS_11_VASCL Sales Document Schedule Line
2LIS_11_VASTH Sales Document Header Status
2LIS_11_VASTI Sales Document Item Status
2LIS_11_V_ITM Sales-Shipping Allocation Item Data
2LIS_11_V_SCL Sales-Shipping Allocation Schedule Line
2LIS_11_V_SSL Sales Document Order Delivery
2. Also, what does it mean when after running OLI7BW wide, with no restriction on my system, still rsa3 shows no records for 2LIS_11_V_SCL?
Any other way to confirm that there may not be any data in 2LIS_11_V_SCL?
Or any way, to make an entry which reflect in 2LIS_11_V_SCL so that I can verify if OLI7BW actually fills the setup table?
Thanks -
My hard drive's gone, I did repair it and now I'd like to get my 'photoshop Elements 7 back, but got a message saying that the serial number is incorrect and it's not. can you help me, please?
Mseixas you can try running the CC Cleaner Tool located at Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html and then reinstalling.
-
My right click is not working and producing the context menu or ability to drag files and folders. I just spoke with a phone support person and we checked that all the mouse/trackpad options for right click were correct and checked.
Please can you help with this.
It has only just happened in the last few days.
Many thanksYou might want to update your profile so that we can see what model iMac you have and what version of OSX you're running.
For this question, it might help to know if you're dealing with a trackpad, Magic Mouse, or something else?
(Until your issue's resolved, you can Control-Left Click to get the right click functionality). -
I want to install a printer hp laser pro cp1525nw on my macbook air with mountain lion 10.8.2 . I download the drivers from the apple site and install them . I resart the macbook . I just can not add a new printer . the computer dos not start a research
Can you help me?hi . I had the simalar problems of my HP b209a-m printer not being seen on my wireless network> I could not add the printer and could not get the printer to join my network, I found this post at HP discussion and it worked!
Each printer has different options/settings but it seems like the general idea should work ok if you can reset printer back to factory settings and find Printer IP Adress.
This is for HP printers
1. On the printer navigate to the Wireless or Network menu.
2. Select Restore Defaults.
3. On your computer look for a wireless network named 'hpsetup' and connect to it.
4. Print a Wireless Network Test from the front of the printer to see its IP address. (on my b209a-m Printer the IP info was found by pressing the Wireless Icon)
5. Type the IP address into the address bar of a web browser to see the printer's internal settings.
6. Click on the Network tab and look for the Wireless Setup Wizard and run it.
7. The Passphrase is the password you use on your wireless connection.
8. Now change the network name on your computer back to your wireless network.
The printer will now be connected to your network. With your the computer backyour wireless network network, you can re-add the printer from System Preferences.
Hope this works--- it did for me.
Jim
Maybe you are looking for
-
What has happened to the essence to what a phone w...
I have been meaning to discuss this for monthsand have never got around to it. The normal land line phone work 100 percent of the time you pick it up and it works you make calls from it and you put it down when your finished. The mobile phone has los
-
Location JDBC jar file while building Jetspeed2
Hi, At the moment I'm trying to get Jetspeed2 installed. Reading the manuals it seems soooo easy. I installed Jetspeed using the default installation method, and wanted to change the database from derby to MySQL. To change the database from derby to
-
Export an album from iPhoto to Aperture
When I tried to export an album from iPhoto the following notice appeared; "Unable to create/users/the house icon/Pictures. Any ideas? I appreciate all the help you can give me. Thank you.
-
Anyone know anything about Mini Softcover?
I just ordered a hardcover book and I know that there is also softcover book. But I just could not figure out what mini softcover is...also does anyone know how to change it to mini cover? cause i only see large hardcover , and large softcover as my
-
Changing colour hue on camera - faces look reddish
is it possible to change the colour hue on the front camera as faces (its sole use) come across as reddish in hue.