Can not save in Audition after using "Edit in Adobe Audition" from After Effects CC

Following the extra credit activity in Lesson 5 of "Adobe After Effects >> Classroom in a Book".
Using Win7 and everything is local on my C drive.
When i try to save in Audition I get "This file is in use by another application and cannot be overwritten"
I searched the forums including this thread (http://forums.adobe.com/message/4520401) but nothing seemed to apply to me.
Using unlocker, it seems that the piano.wav file is locked by DynamicLinkMediaServer.exe single PID but three handles. see a Piano.pkf files in folder but it is not locked and piano.wav is file showing up in audition. Quit audition a and tried again, so not sure if extra handles are artifacts from previous attempts or not.
Just learning CC, but I've been programming PCs from the beginning so quite familiar in those aspects if you need me to track things down. Seems like this has been an issue for quite some time, but not in an environment as plain vanilla as mine.
Any assistance would be greatly apprciated. The inter-program integration is a big asset to CC, but this is a major roadblock.
--greg

Go to the hardware setup - the settings for Edit View recording and Multitrack View recordings are separate, and it sounds as though one is configured correctly and the other isn't.

Similar Messages

CC 2014 Using "Edit in Adobe Audition" question?

In Premiere Pro CC (2014). When I send an audio clip that is an .aif from the timeline to Audition using “Edit in Adobe Audition > Clip”, when it shows up in Audition, the file is a .wav file. Is there a preference that will keep it a .aif file?

Dont know... but possibly an Audition Preference or a workflow actually in Audition for Mixer or Sound File Editor setup

Using tab groups but Firefox 28.0 crashes and even can not save all tabs in archive recently

Hi. I installed tab groups addon on my firefox 28.0 (firefox portable version) and each group has its tabs. of course. Problem is that Firefox crashes when i work on a group with the tabs and even can not save all tabs in archive as MAFF recently too. When i try to save all tabs in archive as... i choose the name and hit save and wait but after some time this crashes too. Last time i saved all my tabs and groups as MAFF or other file was end of april and since then i can not save them anymore because of the crashing.
I read on the help site to delete Firefox then reinstall ect. to fix problems but I DO NOT want to erase my groups with their tabs as i chose this solution working with group tabs as it would be to hard on my cpu when i use for each group a different browser for example.
Please help me fix this problem with the crashes but without loosing my groups and its tabs as they are all important and do not wish to erase them as i use them all.
Thanks and hope for a soon reply :)

Can you give me your crash reports?
#Enter ''about:crashes'' in the Firefox address bar and press Enter. A Submitted Crash Reports list will appear, similar to the one shown below.
#Copy the '''5''' most recent Report IDs that start with '''bp-''' and paste them into your response here.

In Premiere I can edit an avi or mov clip but I can not save the result as a like file. Why not???

In Premiere I can edit an avi or mov clip but I can not save tghe result as a like file. What do I have to do??? It only saves a project. Under 'File' the 'Export' function is greyed out. I need help baddly.
[email protected]
Bill Schoon

Boatbuilder
Let us start from the beginning.
It has been established that you have Premiere Elements 10. On what computer operating system is it running?
There has not been a File Menu/Export/Movie export opportunitity in Premiere Elements since version 7. We are not up to version 12.
For Premiere Elements 10, your export opportunities are all in Share/ including one for Computer. Under Computer there are several choices. The ones that you see are Adobe Flash Video, MPEG, and AVCHD. The others you have to scroll down to. And those choices are AVI, Windows Media, QuickTime, Image, and Audio. You do not have to use the scroll bar for this. You can click on Adobe Flash Video panel to get it to turn black. Then use the down arrow to go down the list and the up arrow to go up the list. Once you get to a category, you can select a preset and go with it or customize it under the Advanced Button/Video Tab and Audio Tab of the preset.
If you post the properties of your source media that you want to try to match in the export, I would be glad to suggest the exact settings for you.
We will be watching for your follow up with details.
Thank you.
ATR
Add On...The Premiere Elements 10 File Menu is for more than Saving, just not exporting. One of the key features that can be access there is the Project Archiver. More on that another time.

I am able to click on a picture in iPhoto to edit it opens automatically in photoshop cs6. However when i am done editing I can not save that image back into iPhoto. Can anyone help with a setting I am missing maybe?

I am able to click on a pic in iphoto to edit it and opens automatically in photoshop CS6. However when I am done editing and save I can not save back into Iphoto. Can any one help wiht this?

Thanks Terence. What a relief. I still don't understand what the book I read was talking about then. Here's a quote from the section I was referring to in "iPhoto 08: The Missing Manual" book, p 91 (ISBN: 0596-516185):
"Note, however, that the instant you edit a TIFF-format photo (Chapter 7), iPhoto converts it into JPEG.
That's fine if you plan to order prints or a photo book (Chapter 11) from iPhoto, since JPEG files are required for those purposes. But if you took that once-in-a-lifetime, priceless shot as a TIFF file, don't do any editing in iPhoto-don't even rotate it- if you hope to maintain its perfect, pristine quality."
After my test results, I thought maybe this was something that had changed from iPhoto 08 to iPhoto 09, so I went to the bookstore yesterday and checked the same book for iPhoto 09, and there it was, the same quote! (on a different page, of course).
Anyway, thanks once again for your confirmation that my test was indeed correct. Linda

My version of LR-5.7 (OS X 10.8.5) apparently does not save the .NEF (Nikon RAW) edits done in the basic module.

My version of LR-5.7 (OS X 10.8.5) apparently does not save the .NEF (Nikon RAW) edits done in the basic module. That means that I can correct exposure, highlights, shadows etc. but once I go to another picture and returned to the edited one the histogram (on the edited photo) and specifically the clipping triangles are white or some other color. This is normally suppose to indicate that some channel or all channels are clipped in the highlight/shadow areas. If I adjust any slider in the Basic panel even as little as one +/- value or press the J-key, the histogram will now show the original edit. Moving on to another photo and then returning to to previously edited one and again the edits are "not saved" and I have to hit the J-key or adjust a slider to see the previously edited information reflected in the histogram.
This is especially frustrating for fours reasons. If I have edited a shoot and return to it I cannot see from the clipping information whether the original edit was correct and of course I might re-edit it (to some now incorrect value). This brings up the second issue synchronization. I can't rely on it because if I go back to fine tune a specific image in the batch the triangles are white or some other color for that and every image. I have to hit the J-key to show/hide clipping or the back slash key to see before/after previews. This is the third issue which is very time consuming and inefficient regarding my workflow. The forth issue is that I have noticed that normally when an image is saved in PS, LR adds a copy of the saved version to its catalogue. I have noticed that the PS to LR saves are all wrong in terms of exposure (they are much lighter in tone) than the original LR edit and the PS edit on my screen. If I check the PS to LR photo in LR I notice that the Basic panel values have been changed and that I have to sync the image with the originally edited RAW/NEF LR file to get it to look the same.
Note 1). I am using an Apple cinema display and a calibrated Eizo ColorEdge monitor to view my NEF files. I have reverted back to using LR 4 however I am not sure if I should expect compatibility problems with Camera Raw 7.4 in LR 4 vs. Camera Raw 8.6 in LR 5.
Note 2.) I am going to do an import converting everything to .dng to see if this is a work around.
Note 3). I would be interested in knowing if this issue is related to the PS RAW engine ver. 8.6, the Adobe created NEF calibrations or LR 5.
Note 4). I have duplicated this issue in OS X 10.8.5, OS X 9.xx and OS X 10.10.1
Hopefully someone else has noticed this problem. Any shared information would be valuable. Thanks for the reply.

Happy New Year!
The Develop panel Tone settings in your Dec 31 screenshot show both the Highlights and Shadows controls set to negative values (-48 and -19). For most images (such as this model shot) they should be set to opposite values (-Highlights and +Shadows). To try and duplicate your issue I used negative values for both of these controls with a similar high contrast image. I noticed that the Shadows control becomes non-linear when both the Highlights and Shadows controls are set to negative values. As I moved the Shadows control from a positive value the Shadows clipping indicator comes ON as expected. Moving the Shadows control to a value caused the clipping indicator to turn OFF and moving it further negative caused it to turn back ON again.
The following screenshots demonstrate the issue with only Highlights & Shadows controls applied as shown.
The Highlights & Shadows controls set just to the threshold of extinguishing the clipping indicators.
Moving the Shadows control toward negative causes the Shadow clipping indicator to come ON (as expected), but at-13 it goes OFF again!
Moving the Shadows control further negative causes the Shadows clipping indicator to come back ON at -33.
This is probably normal behavior for the PV2012 Image Adaptive Tone controls as they were not designed to be used way (- - or ++ Highlights & Shadows). The PV2012 Tone controls all interact with each other, which is why it is suggested to adjust them from the Top down starting with Exposure. For most images using -Highlights and +Shadows of near equal value produces good results.
I still can't duplicate the change in clipping indicators after selecting another image, so it may be unique to certain camera models and/or lighting conditions.
SUGGESTION
Try one of the image files that exhibits this issue using the following PV2102 Tone control adjustment procedure:
Start with all of the Tone controls at their default 0 settings and adjust them from the top-down in the order shown below.
Set Exposure to correct midtone brightness ignoring the highlight and shadow areas for now. Setting Exposure slightly higher (+.25 to +.50 EV) than what looks correct for the midtones seems to work best with most images.
Leave Contrast at 0 for now. It’s usually better to adjust this after the first pass.
Adjust Highlights so that blown out areas are recovered and “fine tonal detail” is revealed.
Adjust Shadows to reveal fine detail in dark areas. For most normal images simply setting +Shadows = -Highlights (Example +50 and -50) works very well.
The Whites control sets the white clipping point, which you can see by holding down the ALT key as you move the slider. Adjust it to the point where you see clipping appear with the ALT key.
The Blacks control sets the black clipping point, which you can see by holding down the ALT key as you move the slider. Adjust it to the point where you see clipping appear with the ALT key.
Now go back and adjust the Contrast control to establish the best midtone contrast
If necessary “touch-up” the controls using the same top-down workflow.
If the issue persists I suggest Exporting an image to DNG file format with the settings that exhibit the issue and post it to Dropbox or other file download site.

"Can not Save file name " InDesign CS6 - Cloud---WTF!

Hello anyone
This new Cloud Adobe CS6 is SO buggy.
not my first issue with it...
I am using
Cloud version of - but locally installed
Trial version of CS6 InDesign.
iMac - mountain lion 10.8.1
i7/12Gig RAM. SSD, and 1 T platter drive.
Anyway-
After many HOURS of InDesign work.
Many pages, lots of stuff.
I exported my work as PDF to send to my boss. Worked fine.
But I can't save the working file.
All Save menu items are grayed out.
The astericks is there in the window title.
When I just close the file- I am prompted to Save the file or lose my work.
I hit Save and get window
"can not save filename"
with no error code.
NOTHING!
This has happened twice. First time not a lot had been done to the file.
So I just re-started the iMac
This time I stand to lose some real work here.
Does this happen if I just use the free version!?!?!?!?
I will happily pay after my trial but if this is what the new CS6 has in store, then screw Adobe.
Can anyone help me???

There's no difference in fuctionality between paid and free versions.
There are two things worth trying, if you haven't already closed and lost the file. The first is to export to .idml, open that and see if you can save it with a new name: Remove minor corruption by exporting
The second is riskier as it depends on ID's amazing file recovery after a crash. If the method above fails you haven't got a lot to lose, though, so here here's the next thing I would try:
Force Quit Indesign. See Replace Your Preferences and use the manual method to replace the InDesign Defaults and InDesign SavedData files (and while you're at it, make a backup copy of the InDesign Recovery folder). Also see Adobe Forums: InDesign crashes at startup and delete the additional files in John's post. If you need to delete or copy hidden files and don't know how to access them, see Access hidden user library files | Mac OS 10.7 Lion
When all that is done, restart InDesign. With luck, autorecovery will open the file again with not much missing and you can try to save it.

I can not save any information on Safari !!!!, i can not save any information on Safari !!!!

please anyone tell me what i have to do with this case, i can not save any information in safari no Bookmarks, no reading list...

Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Can not save my billing statement

Can not "save as" pdf file opened with IE. Error window says "The document could not be saved. There was a problem reading this document (21)".

Hi radoslawd43929798,
This issue has been reported by many of our users and our team is working on it!!
Moreover, I would Recommend you to use 'Save' option when you are prompted to choose among the three ( Open | Save | Save As), and let me know if that works for you.
Does this problem occur with IE only or with other browsers as well?
Regards,
Rahul

I just got photoshop cc 2014 on windows 8.1 64 bit, and it starts up on the white layout and and whenever I start a project it is in a window? Also whenever I try to change on of these it does not save. I am using the trial

just got photoshop cc 2014 on windows 8.1 64 bit, and it starts up on the white layout and and whenever I start a project it is in a window? Also whenever I try to change on of these it does not save. I am using the trial. Basically nothing saves and it was all screwed up when I first got it.

Do a screen screen capture and post it here so we can see what you stating about a white layout...

HT5534 can i save the file which is edited in pages as docx,pdf etc????

can i save the file which is edited in pages as docx,pdf etc????

Use either the File menu > Export or Share menu > Export & choose the format.

In Word 2004 I can not save documents or quit. One suggestion is the recent security update. Any suggestins on how to fix?

In Word 2004 I can not save documents or quit. One suggestion is the recent security update. Any suggestins on how to fix?

Security Update 2012-001 Bricks Rosetta programs
I've outlined the restore proceedure here, it covers a lot of bases and explains what is going to occur so please don't be intimidated it's a LOT easier that it appears.
Take your time and comprehend the steps involved and you'll be backup up like before in short order.
Restore method.
#1 Backup your personal data off the machine.
If you get a gray screen or some other hangup upon booting, try holding the Shift key down while booting to enter Safe Mode.
Backup files off the computer (not to TimeMachine). If you don't have a external drive, get one and connect to the USB/Firewire port and simply drag and drop copy your User folder to the external drive, it will copy all your files. It's best to have two backups of your data off the machine when trying to restore.
Disconnect all drives now to prevent any mistakes from occuring.
#2 Try Restoring from a TimeMachine or hold option bootable clone
If you have TimeMachine drive, or a hold the option key bootable clone use that to erase and restore from before the Security Update occured.
Obviously if you didn't make a recent backup before the update, your going to have to skip to Step #3.
Note: A TM restore can take a awfully long time, a clone restore takes under 2 hours in most cases.
If you don't know how to restore from TM drive
http://pondini.org/OSX/Home.html
#3 Reinstall OS X 10.6 from disk
If no recent TM or bootable clone then:
Get out your 10.6 install disk and make sure it's clean and polished (very soft cloth and a bit of rubbing alcohol, no scratches) If your disk is borked, you'll have to order a new one from Apple with your serial number.
Hold c boot off the 10.6 disk (wired keyboard, internal optical drive), use Disk Utility First Aid to >Repair Disk and Permissions of your internal drive (do not format or erase!!), Quit DU and simply re-install 10.6.
Note: Simply reinstalling 10.6 version from disk (without erasing the drive) only replaces 10.6.8 with 10.6.x and bundled Apple programs, won't touch your files (backup anyway) or most programs, unless they installed a kext file into OS X itself. (only a few on average do this)
Note: If Disk Uitlity can't repair the drive, then come back to seek further assistance and make sure you have a copy of your data off the machine.
#4 Update to 10.6.8 without Security Update 2012-001
Reboot and log in, update to 10.6.8 via Software Update, but EXCLUDE THE Security Update 2012-001 by checkinig the details and unchecking the blue check box.
#5 Reinstall any non-working third party programs
When you reboot, make sure to reinstall any programs that require kext files installed into OS X, you'll know, they won't work when you launch them or hang for some reason.
If for some freakish reason you get gray screen at any time when booting (possible it might occur when you reinstall older programs), hold the shift key down while booting (Safe Mode, disables kext files) and update your installed third party software so it's compatible with 10.6.8.
https://support.apple.com/kb/TS2570
Note: For most users likley Step #3 and #4 is likley all that is needed to be done.
That's it really.
Further Reading:
Learn how to have a OS X drive restore ability using TimeMachine or cloning software
Learn how to clone your entire OS X boot here
http://www.bombich.com/get_ready_for_lion.html
TimeMachine help here
http://pondini.org/OSX/Home.html
Make copies of your original Snow Leopard
http://www.walterjessen.com/make-a-bootable-backup-snow-leopard-install-disc/
Learn how to make a bootable SL USB thumb drive
http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
Deciding on upgrading to Lion?
Learn which programs ARE NOT compatible/updated for Lion, Rosetta programs will not run on Lion.
http://roaringapps.com/apps:table
Unverified hacks
Note: You may see a "hack" for this issue floating around, it has had mixed results as people's software is different.
You may want to try it, but it's at your own risk. It has worked fast for some and not at all for others, hopefully over time it will work for all.
The above methods I outline are Apple approved restore methods + based upon experience here and not a quick fix, but are sure to work as Apple recommends such steps themselves.
If at any time you feel this is beyond your capability, please seek local Mac/PC professional assistance before you lose your data.
In fact my steps above are very simple, you might want to have a family member or friend perfrom the proceedure in about a hour or two.
If you don't have any backup, please maintain at least a TM drive, just hook up a new blank external drive and TM will ask you to make a backup, takes some time so let it work.
If your a bit more skilled, a option bootable clone is much superior than TM drive.
Good Luck

Can not download Creative Cloud single-app membership for Adobe Photoshop (one-year) after purchas

can not download Creative Cloud single-app membership for Adobe® Photoshop® (one-year) after purchasing online (received email confirming order) can you help?
Macbook Pro OS X Version 10.7.5
Processor 2.4GHz Intel Core i7
Memory 8GB 1333 MHz DDR3
After using the trial version of Photoshop CS6, I decided to purchase the one-year Photoshop cloud version.
I was told by a friend to do a "clean" download, so removed the "previous version".
Now when I click the "download" tab, nothing happens.
Can you help?

Please download/install CC desktop : https://creative.adobe.com/products/creative-cloud and try downloading Photoshop. If still the same issue then as suggested by Mylenium run the cleaner tool and try downloading again.
You may even try the direct link: http://prodesigntools.com/adobe-cc-direct-download-links.html .
Please ensure to follow the very important instructions before download.
Regards,
Romit Sinha

In pages when i try to save it says sorry can not save as

i went in and used their stock template for a brochure. i changed it with my info, and when i try to save it says sorry can not save the document untitled as "my file name". HELP!!

It might be that it doesn't like your choice of name or folder. What name are you saving to?
Jerry

HT1338 I can not empty my trash can my MacBook Pro can not save anything because of it.No room available error.what can I do? I also have Windows 7 on my Mac.

I can not empty my trash and my MacBook Pro can not save anything because there is no space left".No room available error."what can I do? I also have Windows 7 on my Mac.

If it were me, I'd get a new hard drive or SSD and put it in an external enclosure. Boot into the recovery partition, format the new drive (not the old one) and install the OS to it. Shut down the Mac, open it up, and swap the drives. You may be able to read your data from the old one externally if you're lucky. If you're very lucky you may be able to use Migration Assistant to move all your stuff to the new drive.
Look at ifixit.com for the exact procedure to get to the drive on your model. If it's a unibody it's pretty simple.
http://www.amazon.com/Sabrent-2-5-Inch-Aluminum-Enclosure-EC-TB4P/dp/B005EIGUD4/ ref=sr_1_3?ie=UTF8&qid=1392154588&sr=8-3&keywords=2.5+enclosure

Can not save in Audition after using "Edit in Adobe Audition" from After Effects CC

Similar Messages

Maybe you are looking for