Can not save in Photoshop 7.0; error message

I have been modifying several jpeg images - changing background color mostly. Some of them save successfully, others do not. There is no apparent difference between the verious jpegs (size, etc).
On the ones that will not save, I get the following error message: "Could not complete your request becaause of a program error".
I have tried various things to fix that I have found by Goolgling - changing the printer, re-loading Photoshop.
Any other ideas would be welcome.

Jana,
Can you tell us what the full specs. are, for your I/O sub-system, i.e. your HDD's (Hard Disk Drives) size, free-space, controller type, and speed?
A "partition" is the creation of several "logical volumes" on a single "physical HDD." It was required, going back in time, when the OS's, and the programs, of that day, could not address larger HDD's. As a "for instance," PS could only see 4GB of HDD space, for use as Scratch Disks. I cannot recall just when PS could see, and use, larger HDD's, but think that it was as of CS (the next version after PS 7). Also, there was an important update for PS 7, and it think that it was PS 7.0.1. If you have not applied that update, I would do so.
Good luck,
Hunt

Similar Messages

Can not save because of a program error

I am using leopard. I just upgraded to CS2, This is the error message I am getting. Not every time just sometimes. Which is bad if I am working for a client and I have put so much work into something I can't save.

Doreen,
Be aware that CS2 does have issues running on Mac OS X 10.5.x that will not be "fixed" by Adobe. You should be running CS3 on that OS.
Neil

I Beta tested 4.0 RC1 and now can not upgrade to 4.0. Error message is need to reboot to complete prior instalation. Have removed all previous versions of Firefox, rebooted and still same error message.

I Beta tested up to and including 4.0 RC1 without major problems. However I can not now upgrade to 4.0. Same error message time and again, "need to reboot to complete prior upgrade instalation". I rebooted several times, then tried first removing all previous versions of Firefox using both MS Add/Remove and then iolo System Mechanic, then again downloading 4.0. Even after rebooting same error message. I can not therefore install/use Firefox.

Do a clean (re-)install:
* Download a fresh Firefox copy and save the file to the desktop.
* Firefox 4.0: http://www.mozilla.com/firefox/all.html
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data if you uninstall the current version.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere (not in the Firefox program folder) and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

When trying to log into my mailbox I can not do so I get an error message saying "something went wrong try later" is the fault at your end?

I am running Firefox instead of "I E" thinking it was less prone to freezing.
I have "Bing" as my browser. I try to log into my outlook inbox as I normally do but I get a message on screen saying SOMETHING went wrong please try later, What & by whom?
It was working earlier now after waiting then trying several times I still cant.
When I have downloaded "Firefox" it also installs maintenance how do I do such a task when I can not find out where I should do so.
I went to my Yahoo account to see my newsletter from you, there I am able to install the latest "Firefox"
thinking that by doing so I could enter my outlook mail BUT NO

Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

Can not download I tunes keep getting error message 7

I can't download I tunes on my lap top, after i download and try to open the program i get a error message 7 and redownload I tunes again and i still ger error Message 7, can any one help me, thanks

Hello Beebopper 1313,
Welcome to Apple Support Communities.
The article linked below provides a lot of great information and troubleshooting tips that'll resolve most issues like the one that you’ve described, where you see an “Error 7” alert message when trying to launch iTunes on your PC.
iTunes for Windows: "Error 7" message when opening iTunes - Apple Support
So long,
-Jason

"iPod Touch can not be backed up. The file needed can not be found" This is an error message I got when trying to restore my iPod Touch today after the volume bar disappeared!

Today the volume bar disappeared on my iPod Touch leaving me with no volume control. When I tried to do a restore I got the message "iPod Touch can not be backed up. The file needed can not be found" I'm in a double whammy here. First off has anyone ever got and cured either problem?
Thanks!

Problem solved thanks to another post here on the same topic.
1-Opened i Tunes & Connected iPod Touch
2- Unchecked "Open iTunes when connected"
3 - Synched iPod
4- Hit "Apply"
5- Checked "Open iTunes when connected"
6- Synched iPod
7 - Hit "Apply"
8- Ejected iPod and closed iTunes
9- Re-connected iPod Touch
10- iTunes opened automatically!

How can I save to web without getting error messages and having my computer tell me there is no memory or freezing up and shutting down? I've read many other suggestions but have tried those things and none have worked. I have photoshop 12.

Photoshop: Selecting Save for Web gives error: "Could not complete this operation. An unknown operating system error has occurred."
I have tried all of the solutions I've found, but none work for me or my two systems (windows 7 and windows 8.1)
Many times I get the message only when saving a web file that there is not enough memory: My windows 8 has 2 TB and 10 Gigs of ram. I took it into the shop to see if something was wrong with the hard drive or ram, but when I hooked up my windows 7, I'm having the exact same issues. Please help.
I tried this:
I set ram to 100%, I changed my preferences in editor to not run anything to do with auto analyzer, I renamed the file auto analyzer to put a space in as someone said to do... I even did the following...
Reset Photoshop's Save For Web preferences:
1. Quit Photoshop
2. Delete the "Adobe Save For Web 12.0 Prefs" file:
Mac: Users/[Username]/Library/Preferences/Adobe Save For Web 12.0 Prefs
Windows XP: Documents and Settings/[Username]/Application Data/Adobe/Save For Web/12.0/Adobe Save For Web 12.0 Prefs
Windows 7 and Vista: Users/[Username]/AppData/Roaming/Adobe/Save For Web/12.0/Adobe Save For Web 12.0 Prefs
Whenever I "save for web" and save something to the root of C:/ it will work, but the next time I "save for web" it produces the error. I was able to fix it by going into User Account Control settings and scaling down to "never notify." It requires a reboot, but the next time I "saved for web" it worked fine.
If you do this, be sure to change the UAC back to "default" as it is a security measure.
FYI you will have to restart anytime you tweak UAC.
To change UAC in Win 7 go to control panel>Action Center>Change User Account Control Settings and drag the slider to "never notify."

Try this: press F10 or tap the Alt key to display the menu bar temporarily, then
View > Toolbars > Menu Bar
If that doesn't work, you could reset your toolbars to factory default using Firefox's Safe Mode. First, make a backup of your computer for safekeeping. To back up Firefox, see [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information].
Next, start Firefox in Firefox
[http://support.mozilla.com/kb/Safe+Mode Safe Mode], and check only the box to reset toolbars. Be careful not to "reset" anything else if you didn't back up.
Hope this helps.

Can not edit a "Script task" with error message

TITLE: Microsoft Visual Studio
I try to edit the vb.net script in script task that I developed and get this message.
Any idea what happen and how to fix this.
Cannot show Visual Studio 2008 Tools for Applications editor.
ADDITIONAL INFORMATION:
Failed to create project at location "C:\Documents and Settings\pchen\Local Settings\Temp\2\SSIS\78a8360ded6b4c719c8aae52ac7483bb"! (Microsoft.SqlServer.VSTAScriptingLib)
The given path's format is not supported. (mscorlib)

Silviu investigated further and found the root cause.
Repro steps to break it (SSIS 2008 VSTA editor for Script Task/Script Component)
1. Edit script in VSTA
2. in VSTA File->Save As: save file somewhere on disk (intent is to back up script code)
3. close vsta.
4. OK script task dialog
5. Edit script in task again. Gives Error above.
This is a bug in the way SSIS calls into VSTA. Unfortunately SSIS cannot disable “Save As” functionality in the script designer which in turn will cause the error you are seeing the next time you try to load the script.
This is caused by the source file you saved in a location which is not under the project folder.
We have opened a bug for this in the next version of SQL Server, but the workaround is easy enough for anyone facing this in SQL 2008 or SQL 2008 R2.
Thanks, Jason
Didn't get enough help here? Submit a case with the Microsoft Customer Support team for deeper investigation - http://support.microsoft.com/select/default.aspx?target=assistance

PE12 will not save photos. I get error message "cannot complete your request due to program error"

I have tried to delete the Prefs.
I have tried re-booting.
I have tried uninstalling and reinstalling the software.
Still the message appears.
I am literally just opening a .jpg and trying to save it.
I have tried Save, Save As (Overwrite) and Save As (Changing Name.
Still the message appears.
Any suggestions?
Thanks!

Can you please refer to discussion at below link for saving file :- http://forums.adobe.com/message/5849580

HT201210 Using Windows 7 and since updating to current iTunes yesterday I can not open iTunes. I receive error message "The folder "iTunes" in on a locked disk or you do not have write permission for this folder." I made no changes other than updating iTu

I'd really like to be able to open iTunes and update my iPhone5 and iPad2 to IOS7. grr

In my case its a new computer the old one was stolen and the time machine disk did not work for a restore but did for copying the info to the new mac

I am able to click on a picture in iPhoto to edit it opens automatically in photoshop cs6. However when i am done editing I can not save that image back into iPhoto. Can anyone help with a setting I am missing maybe?

I am able to click on a pic in iphoto to edit it and opens automatically in photoshop CS6. However when I am done editing and save I can not save back into Iphoto. Can any one help wiht this?

Thanks Terence. What a relief. I still don't understand what the book I read was talking about then. Here's a quote from the section I was referring to in "iPhoto 08: The Missing Manual" book, p 91 (ISBN: 0596-516185):
"Note, however, that the instant you edit a TIFF-format photo (Chapter 7), iPhoto converts it into JPEG.
That's fine if you plan to order prints or a photo book (Chapter 11) from iPhoto, since JPEG files are required for those purposes. But if you took that once-in-a-lifetime, priceless shot as a TIFF file, don't do any editing in iPhoto-don't even rotate it- if you hope to maintain its perfect, pristine quality."
After my test results, I thought maybe this was something that had changed from iPhoto 08 to iPhoto 09, so I went to the bookstore yesterday and checked the same book for iPhoto 09, and there it was, the same quote! (on a different page, of course).
Anyway, thanks once again for your confirmation that my test was indeed correct. Linda

HT1338 I can not empty my trash can my MacBook Pro can not save anything because of it.No room available error.what can I do? I also have Windows 7 on my Mac.

I can not empty my trash and my MacBook Pro can not save anything because there is no space left".No room available error."what can I do? I also have Windows 7 on my Mac.

If it were me, I'd get a new hard drive or SSD and put it in an external enclosure. Boot into the recovery partition, format the new drive (not the old one) and install the OS to it. Shut down the Mac, open it up, and swap the drives. You may be able to read your data from the old one externally if you're lucky. If you're very lucky you may be able to use Migration Assistant to move all your stuff to the new drive.
Look at ifixit.com for the exact procedure to get to the drive on your model. If it's a unibody it's pretty simple.
http://www.amazon.com/Sabrent-2-5-Inch-Aluminum-Enclosure-EC-TB4P/dp/B005EIGUD4/ ref=sr_1_3?ie=UTF8&qid=1392154588&sr=8-3&keywords=2.5+enclosure

BI7 Transport system active can not save error

Transport system active can not save error
Hi ,
We are using BI7 SP13 integrated with Portal.When we try to save the reports it throws error" Transport system is active can not save"
BI 7.0 Test Server still has SP09 and the report works fine.
Has anyone experienced this issue before ?? Pls suggest

Hi Kristene,
Are you getting this error for one report or for all the reports which you are trying to save them in your favourates.
Best Wishes.
Kumar

I am from russia and i cant understand why my iphone 4g(black) can not sync..The computer gives an error saying that the synchronization can not be executed because you can not save a copy ... What should I do?

I am from russia and i cant understand why my iphone 4g(black) can not sync..The computer gives an error saying that the synchronization can not be executed because you can not save a copy ... What should I do?

Hey joshuafromisr,
If you resintall iTunes, it should fix the issue. The following document will go over how to remove iTunes fully and then reinstall. Depending on what version of Windows you're running you'll either follow the directions here:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/HT1925
or here:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Best,
David

"Could not complete your request because it is not a valid Photoshop document." Error

Hey,
I've been getting the "Could not complete your request because it is not a valid Photoshop document." error in one of my PSDs.
Here are just some notes:
The original file type is .psd, not a tiff whatsoever, and the file extension is purely myfilename.psd, not other random weird name
PSD file (in case you need it): https://www.mediafire.com/?1xkz2aki87p3kqc
I did not update my Photoshop or anything
It'd be great if solutions were suggested, I need this PSD file recovered desperately for a project.
Thanks

Very well. Try this with your Mac:
Open "new.psd" in Preview
File > Save
new.psd becomes new.png If the extension was correct, Preview would not have changed it.
it now opens in Photoshop You can download it here. ("Save image As...)
Simply put, you had the wrong extension.

Can not save in Photoshop 7.0; error message

Similar Messages

Maybe you are looking for