Can not see a sbRIO in MAX running on a virtual machine
I am trying to connect a sbRIO-9606 to a Windows 7 virtual machine (VMWare) running on a MacPro. I can open a CMD prompt and ping the sbRIO but when I run MAX, it does not appear in Remote Systems.
The virtual NIC is bridged to the pyhsical one (on the MAC)
Does anyone have experience doing this, or know why I cannot see the sbRIO?
Hi jaketc,
I've had similar issues at times depending on how my host and guest operating sytems network interfaces are configured. It sounds like your settings are correct (bridged), but it is difficult to guarantee. The first step I usually take is disable any network interfaces (on the host and guest OS) that are not critical to connecting to the remote target.
A more generic answer is to walk through the troubleshooting steps in this document, but it won't cover the virtualized OS considerations of your setup:
Why Does My CompactRIO Controller or Single-Board RIO Not Show Up in Measurement & Automation Explor...
Because you can ping the target, it sounds like the Single-Board RIO already has an IP address, you know what it is, and ethernet communication can be established. When I've been in that situation in the past, I've been able to manually add the RIO target to MAX. To find a system that is already configured with an IP address, simply right-click on Remote Systems and select Create New. Enter the appropriate configuration information in the dialog box, and MAX will manually place that system in the Remote Systems listing and all tasks will function properly.
Cheers,
Spex
National Instruments
To the pessimist, the glass is half empty; to the optimist, the glass is half full; to the engineer, the glass is twice as big as it needs to be...
Similar Messages
-
I can not see my JPGs when i run my JSP
Hello,
I have a JSP which is called by servlet by RequestDispatcher. However
when this JSP is run in browser I can not see the jpgs i put inside
as banner or logo. (By the way, i can see them in JSP viewer, I mean inside tool) Those are all static images. Is there a procedure I should do in servlet or JSP to make them appear?
Thank you very much..the only reason you don't see them is because the browser can't find them (in that case they'll appear as red crosses). Remember that the ultimate output is HTML and that should be correct.
-
I can not see my CF-6004 device in MAX
Hi,
I have HP IPAQ PocketPC with Windows Mobile 2005, CF-6004
device, PDA 8.0.1 module and I installed DAQmx Base 2.0 on PocketPC. I followed instructions in documentation I get with DAQmx Base 2.0 and PocketPC is correctly conncted to PC.
But I can not see CF-6004 in MAX?!?
I found out somewhere that DAQmx Base support CF-6004 on Pocket PC 2003 OS but I did not found that information for Windows Mobile 2005 OS!
Thanks for help!
AndrejHello Andrej,
Devices that use the NI-DAQmx Base driver will not appear with Measurement & Automation Explorer (MAX). Instead, you should use the NI-DAQmx Base Configuration Utility found within LabVIEW under Tools > NI-DAQmx Base Configuration Utility.
Follow the instructions in the following Knowledgebase for loading the correct task list for use with the DAQmx Base shipping examples:
KB 3RRF2088: NI-DAQmx Base Task Configuration Utility Does Not Show PDA DAQ Device
Also, with the new DAQmx Base 2.1, you can now use the CF-6004 Compact Flash Device with the LabVIEW 8.20 PDA Module to target Windows Mobile 5.0 devices.
I hope this helps,
Travis G.
Applicaitons Engineering
National Instruments
www.ni.com/support -
Can not see running jobs from, package
I have a problem with processing parallely runing jobs:
I am creating another immediately runned jobs in a main job. Those two parallel jobs (2 loads from different databases) have to be finished before I run next operation (working out loaded data). Problem is that, after starting those 2 parallel jobs, I can not see them by select from ALL_SCHEDULER_RUNNING_JOBS that is executed immediately after I create those jobs in a package. If I take a look into ALL_SCHEDULER_RUNNING_JOBS from anonymous statement I can see all my running jobs. Let's sum it up:
1/ Start of main job
2/ Running 2 immediately created jobs (load data)
3/ Checking in loop if jobs created in step 2 are still running
3.1/ Jobs are running (ALL_SCHEDULER_RUNNING_JOBS check) - sleep for a
while - It never happens - can't see any running jobs from select executed in
package but can see them in
anonymous statement
3.2/ Jobs finished - start processing loaded data
Can somebody help me with this task?
Thanks alot!
JakubHi,
There is no reason a job should be visible from an anonymous block but not from inside a job. There are two things that may be happening here.
- jobs scheduled to run immediately my not start running as soon as they are created/enabled, you may need to wait a bit before they start running (they will appear in all_scheduler_jobs immediately but maybe not all_scheduler_running_jobs immediately)
- you may be running into privilege issues. Is the user that executes the anonymous block the same as the user that the job is running as (the job's schema) ? If not maybe the job user does not have privileges to see the job (you can grant alter on the job to the user to ensure this).
Can you see the jobs in the all_scheduler_jobs view from within the job with status RUNNING ? If you can see jobs in all_scheduler_jobs as RUNNING but not in all_scheduler_running_jobs then this is a bug of some sort.
Thanks,
Ravi. -
My PC's OS is 'MS Windows Vista Home Premium'. As my initil question states: When downloading, after the download completes, I can not see, run, nor access the file in it's designated folder. The download only appears in the "Downloads" window and the only "Right Click" options permitted are to "Remove From List", "Select All", & "Copy Download Link" I also can not double click to run it. What's blocking it?
I have a similar problem when accessing .zip files that are attachments to my emails. Here, however, I can place the file in a designated folder, however, the .zip file and it's compressed content files are file-typed as "FireFox Document" and I get permissions errors when running an unzip tool.
Why are my download files being quarantined ??? Is there a security setting option I need to change???
To get around this, I'm using IE to download and install these files, but switching back & forth between FireFox & IE is a real pain.It's your anti-virus not working correctly while scanning. You can turn off the option to scan in Firefox's '''about:config''' by filtering for '''browser.download.manager.scanWhenDone''' and double-clicking that line to change the value to '''false'''
-
I am running Windows 7. I have 250 photos from a trip that I want to load to the iPad v 6.1.3.1 and show as slide show (in named order). I can not see any recent remarks regarding how to keep them from being loaded in date order
By default the photos will be sorted by the date modified.
iOS: Understanding photo sorting
Edit (touch) them in the order you want them to be shown. -
I followed instructions to down load latest real player. it did not solve the problem. i can not see the video on youtube but can hear it.... Explorer works fine. Please help.
You can check for problems caused by a recent Flash 11.3 update and possibly downgrade to Flash 11.2 or 10.3.
*https://support.mozilla.org/kb/flash-113-doesnt-load-video-firefox
*https://support.mozilla.org/kb/flash-113-crashes -
Can not see the report in report manager/admin tab
Hi,
in 8.49 on Win 2003 some users can not see the reports in report manager/admin tab. PS user can see them.
Should we add some grants in user profile ? Which ? Any query to compare that user profile with PS ?
Thank you.On the administration page, you will be able to see "View Reports For" header on the top.
Under that header you will see the following fields:
User ID/Type/Last/Status/Folder /Instance
Above values will be used by PeopleSoft to filter and display the list of reports
If the user has selected Status as Processing and saved the page, PeopleSoft will only show reports which are in Processing status.
If user runs a report and it has been posted, it will not show up in report manager coz the filter value is set to Processing.
Hope this helps. I dont think Permissions has anything to do with this since user is able to view the page. -
Can not see wireless TM in disk utility or desktop.
Am I running a TM Airport (router) it runs great, I love everything about it and the backups have no issues.
But I wanted to partition my 500mb drive on my TM yet for some reason I can not see the drive either on my desktop or in disk utility. Is there some setting I need to change somewhere else to be able to view this wireless drive and configure it? I looked via Airport Utility and the only option there is to archive or erase it, at least that can see it.
When the backup starts I do see a mounted drive show up.
Any ideas?It does not show up because when I am not backing up, it gets disconnected...
-
Can not see the ICON of Complete Order (Business Completion) in the IW32.
Hi All,
I want to Complete the Maintenance Order (Business Completion) but I can not see Icon - Complete Order. to complete the Maintenance Order. I understand Order --- Function -
Completion path can be used for competeion but it is disabled.
For Superuser's LOGIN they have the ICON for complete Orders and they can see any error message for completiing Orders. Since I cant perform complete Order I can not see any error message.
Is there any user settings for ICON's display.
Regards,
NarendraIt is assigned in role
To display - run PFCG and select the role click display and select authorisation tab click details icon and click organisation level to view the Buisness transaction
To maintain - Run PFCG and select role : SAP_Workorder_Closer ,Click the pencil and click on the authorisation tab and change authorisation value and eithier you can manually maintain I_BETRVORG with BABS value. or Choose Plant maintenance business transaction from the structure and add BABS and generate the profile. then execute the transaction.
Co-ordinate with Basis or Security team
Thanks
S.N -
I can not see all "Divisions" in BP Rel.--Partner Function Assignment
Hi,
When I edit "Partner Function Assignment" in BP reliationship such like BUR011("Employee Responsible"),
I can not see all "Divisions" in list which I can see in configuration via SPRO-->Customer Relationship Management->Master Data->Orgnizational Management->Division Setting->Define Divisions.
E.g., in configuration, I can see 7 records of divisions from "001" to "007", but in "Partner Function Assignment" of BP relationship, I can only see "002" to "004".
Do you know why? Thanks a lot!
Best regards,
Longhi
that should not be happening,if they are visible in one client then should be there in another too
do one things try run this
hrbc1_atributes_buffer_update
it will refresh the buffers of your org structure and then you may be able to add this
also check the check box where it is mentioned that"object determination should be permitted"
remember it will run only for once after you run this the check box will be unchecked again
i guess it may solve your probs
also try to structure your org structure index
use t code
crmd_index_om
and withtin the object type give O
and execute
best regards
ashish -
Can not see Stored Procedures owned by "Code Owner"
Post Author: BinChen
CA Forum: Deployment
I am using Data Source defined with "CR Oracle ODBC Driver 5.0" in "Data Source (ODBC)".
But in Crystal Report XI, I can not see CodeOwner when I can created a new connection using ODBC (RDO).
I can see CodeOwner and all SP defined under it when I use "Oracle Server" directly or use sqlplus.Post Author: BinChen
CA Forum: Deployment
I'm using Window XP with Oracle 10g2R
To be more clear,
I have an ODBC Data Source defined as "DEV" and when I created a connection using ODBC, I can only see some database account section like: APP, APPREF, PUBLIC, SYS, SUSTEM. But I can not see CodeOwner.
If I connected without using ODBC, I can also see CODEOWNER and then all its stored procedures.
So why I can not see Stored Procedures defined under CODEOWNER using ODBC?
I have an exsiting report, even I can not see CODEOWNER, but I have no problem to run and preview the report also to "verify database". -
Please I can not get a .jar file to run on XP SP3 start/run/cmd/
I can not get a .jar file to run on XP SP3 start/run/cmd/
Please help if can figure this out. I'm convinced it is a Windows XP SP3 problem from searching on google and seeing other ppl on XP SP3 with same problem (but no working solution for myself). I'll try to be complete-listing all I've done.
I had installed: Java SE Runtime Environment v6u14 for Windows Multi-language
I had checked here it was working properly: http://www.java.com/en/download/manual.jsp
I'm trying to run this jar file (soht-client-0.6.2.jar):
http://prdownloads.sourceforge.net/telnetoverhttp/soht-java-client-0.6.2.zip?download
http://www.ericdaugherty.com/dev/soht/javaclient.html < this is the information for the program.
(yes the file can be executed and should open the program's window
I wanted to post screenshot of it but friend that it's working for isn't here)
_(Please find log of all cmds I did in this post here: http://pastebin.com/f792983df )_
_I have extracted +'all' the files to: C:\062\+_ (I have tried using other directories, same problem)
++I then start/open/run/cmd+
then I: cd C:\062\+
then I try various commands - all+ of these do absolutely nothing- meaning no errors, no reply, no window opens, nothing except enters that directoy again:
java -jar soht-client-0.6.2.jar
java -jar -client soht-client-0.6.2.jar
java -client -jar soht-client-0.6.2.jar
java -jar soht-client-0.6.2.jar soht.properties
soht-client-0.6.2.jar
So I try this cmd: java soht-client-0.6.2.jar
Reply:
C:\062>java soht-client-0.6.2.jar
Exception in thread "main" java.lang.NoClassDefFoundError: soht-client-0/6/2/jar
Caused by: java.lang.ClassNotFoundException: soht-client-0.6.2.jar
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
Could not find the main class: soht-client-0.6.2.jar. Program will exit.
I try this cmd:
java -jar soht-client-0.6.2.jar -client
Reply:
C:\062>java -jar soht-client-0.6.2.jar -client
Unable to load configuration file: -client - java.io.FileNotFoundException: -cli
ent (The system cannot find the file specified)
SOHT Java Client
The SOHT Java Client requires a properties file. Either start
the application in the same directory as the soht.properties
file, or specify the file name on the command line:
java -jar soht-cleint-<version>.jar c:\soht.properties
So then I do these cmds which produce the exact same error/reply just above; Unable to load..:
j_ava -jar soht-client-0.6.2.jar -client soht.properties_
java -jar soht-client-0.6.2.jar -client C:\062\soht.properties
So then I copy soht.properties to C root and do:
java -jar soht-client-0.6.2.jar -client C:\soht.properties <same error as above
Then from other information I have read I right click on the .jar file, select open with Always open with:
_"C:\Program Files\Java\jre6\bin\javaw.exe"_
Try again.. same problem.
Then I do cmd:
_"C:\Program Files\Java\jre6\bin\javaw.exe" -jar "C:\062\soht-client-0.6.2.jar"_
does nothing, retry the other commands same thing (either nothing or those same replies)
Then I read (http://forums.sun.com/thread.jspa?threadID=5384879) someone had the same problem as I and they solved it by uninstalling all Java/reboot/ then install JDK 6 Update 14 with NetBeans 6.5.1 start NetBeans and then it worked for them.
So I unistalled all Java, rebooted and gave the cmd another try (before re-installing), now a new error, of course:
C:\062>java -jar soht-client-0.6.2.jar
'java' is not recognized as an internal or external command, operable program or batch file.
Then I install Java SE and NetBeans Cobundle (JDK 6u14 and NB 6.5.1) Final Release/ reboot/ open Netbeans/
go to test java page; all is good, run cmds again -and still nothing..
C:\062>java -version
java version "1.6.0_14"
Java(TM) SE Runtime Environment (build 1.6.0_14-b08)
Java HotSpot(TM) Client VM (build 14.0-b16, mixed mode, sharing)
I reassociate program with: C:\Program Files\Java\jre1.6.007\bin\javaw.exe_
same thing.. nothing
Thank you very much for your time :D_
PS. My computer has been newly reformatted so needing another reformat I'm sure is not the solution.Thank you very much for your replies Taggert_77 & swmtgoet_x :D
Taggert77_: I have never used NetBeans. I only installed it in the bundle as I had read on another post that somehow installing the bundle magically helped another user with the same problem (he didn't know why it worked after that either).
Before XP SP3 I was able to execute .jar file through cmd prompt. Now I am not.
This file is executable, grab it and you will see. Here is a screen shot (program in front is FlashFXP, behind is the cmd prompt and what should happen):http://www.freeimagehosting.net/uploads/53273b4ddf.jpg
swmtgoetx_: I only did the other cmd's to try to make it spit out something, anything lol :D
The proper cmd is simply: java -jar soht-client-0.6.2.jar
I did give your cmd a try, and it produced nothing :( (just like the other correct cmds)
java -client -jar soht-client-0.6.2.jar soht.properties
Thank you again...the mystery remains
PS. If you do a search for this you'll find an amazing amount of XP SP3 users with the same problem and no solution posted that I could find except one chap that did the unistall install order that I did above). -
Hi there
I just upgrade to 10.8.5 (from snow leopard on an '08 iMac 2.4 GHz Intel Core 2 Duo with 4 GB memory) and I have a problem with Mail
While during migration there was no problem and it looks like all my massages was transferred (more than 17.000 mails) when I open Mail there is no "Message Viewer" window and if I try to open it from menu "Window" I have the message "Mail quit unexpectedly" (I have report it to Apple).
So I can not see my mails!!
Otherwise everything looks "OK" with Mail. I can see all my accounts in Preferences, I can see other windows like Activity, I can even see the red indicator with he new mails on the Mail icon on the Dock… But I can not quit Mail, only Force quit…
Thank you in advance for your help.
I am really sorry but If there will be no solution I am afraid I will go back to snow leopard…Hello
and thank you for your help
I hope the following information are the ones you ask and useful!
Step 1
24/9/13 11:18:37,404 μ.μ. Mail[3161]: *** -[NSSet initWithArray:range:copyItems:]: array argument is not an NSArray
24/9/13 11:18:37,408 μ.μ. Mail[3161]: (
0 CoreFoundation 0x00007fff8e11cb06 __exceptionPreprocess + 198
1 libobjc.A.dylib 0x00007fff8df813f0 objc_exception_throw + 43
2 CoreFoundation 0x00007fff8e0fb454 -[NSSet initWithArray:range:copyItems:] + 212
3 Message 0x00007fff847b148c -[SmartMailboxUnreadCountManager smartMailbox:didInitializeWithDictionaryRepresentation:] + 98
4 Message 0x00007fff847b0cac -[MailboxUid initWithDictionaryRepresentation:] + 1289
5 Mail 0x00000001074b422b Mail + 33323
6 Mail 0x00000001074b3cbf Mail + 31935
7 Mail 0x00000001074b3990 Mail + 31120
8 Mail 0x0000000107640763 Mail + 1656675
9 Mail 0x0000000107640d13 Mail + 1658131
10 Mail 0x00000001076129e3 Mail + 1468899
11 Mail 0x000000010761321f Mail + 1471007
12 AppKit 0x00007fff89083199 -[NSPreferences _selectModuleOwner:] + 706
13 AppKit 0x00007fff8908289d -[NSPreferences _setupPreferencesPanelForOwner:] + 448
14 AppKit 0x00007fff89082944 -[NSPreferences showPreferencesPanelForOwner:] + 33
15 Mail 0x0000000107630177 Mail + 1589623
16 AppKit 0x00007fff88d0b959 -[NSApplication sendAction:to:from:] + 342
17 AppKit 0x00007fff88e4136c -[NSMenuItem _corePerformAction] + 406
18 AppKit 0x00007fff88e4105a -[NSCarbonMenuImpl performActionWithHighlightingForItemAtIndex:] + 133
19 AppKit 0x00007fff88b2e20f -[NSMenu _internalPerformActionForItemAtIndex:] + 36
20 AppKit 0x00007fff88b2e097 -[NSCarbonMenuImpl _carbonCommandProcessEvent:handlerCallRef:] + 135
21 AppKit 0x00007fff88e3a165 NSSLMMenuEventHandler + 342
22 HIToolbox 0x00007fff8ed9ed1a _ZL23DispatchEventToHandlersP14EventTargetRecP14OpaqueEventRefP14HandlerCallRec + 1206
23 HIToolbox 0x00007fff8ed9e1e9 _ZL30SendEventToEventTargetInternalP14OpaqueEventRefP20OpaqueEventTargetRefP14H andlerCallRec + 410
24 HIToolbox 0x00007fff8edb3fc9 SendEventToEventTarget + 40
25 HIToolbox 0x00007fff8edeaca9 _ZL18SendHICommandEventjPK9HICommandjjhPKvP20OpaqueEventTargetRefS5_PP14OpaqueE ventRef + 443
26 HIToolbox 0x00007fff8ed8fa21 SendMenuCommandWithContextAndModifiers + 59
27 HIToolbox 0x00007fff8ed8f9d3 SendMenuItemSelectedEvent + 254
28 HIToolbox 0x00007fff8ed8f85f _ZL19FinishMenuSelectionP13SelectionDataP10MenuResultS2_ + 94
29 HIToolbox 0x00007fff8ed6b8bb _ZL14MenuSelectCoreP8MenuData5PointdjPP13OpaqueMenuRefPt + 605
30 HIToolbox 0x00007fff8ed6aec8 _HandleMenuSelection2 + 565
31 AppKit 0x00007fff88cf98c6 _NSHandleCarbonMenuEvent + 245
32 AppKit 0x00007fff88c1ba9f _DPSNextEvent + 2073
33 AppKit 0x00007fff88c1adf2 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 128
34 AppKit 0x00007fff88c121a3 -[NSApplication run] + 517
35 AppKit 0x00007fff88bb6bd6 NSApplicationMain + 869
36 libdyld.dylib 0x00007fff8883b7e1 start + 0
37 ??? 0x0000000000000002 0x0 + 2
24/9/13 11:18:56,856 μ.μ. Mail[3161]: An exception occurred during invocation of -[MailboxesController _writeSmartMailboxesToDisk]
24/9/13 11:18:56,856 μ.μ. Mail[3161]: *** -[NSSet initWithArray:range:copyItems:]: array argument is not an NSArray
24/9/13 11:18:56,858 μ.μ. Mail[3161]: (
0 CoreFoundation 0x00007fff8e11cb06 __exceptionPreprocess + 198
1 libobjc.A.dylib 0x00007fff8df813f0 objc_exception_throw + 43
2 CoreFoundation 0x00007fff8e0fb454 -[NSSet initWithArray:range:copyItems:] + 212
3 Message 0x00007fff847b148c -[SmartMailboxUnreadCountManager smartMailbox:didInitializeWithDictionaryRepresentation:] + 98
4 Message 0x00007fff847b0cac -[MailboxUid initWithDictionaryRepresentation:] + 1289
5 Mail 0x00000001074b422b Mail + 33323
6 Mail 0x00000001074b3cbf Mail + 31935
7 Mail 0x00000001074b3990 Mail + 31120
8 Mail 0x0000000107649df0 Mail + 1695216
9 Mail 0x0000000107537d95 Mail + 572821
10 CoreFoundation 0x00007fff8e11009c __invoking___ + 140
11 CoreFoundation 0x00007fff8e10ff37 -[NSInvocation invoke] + 263
12 CoreMessage 0x00007fff8cfe07d7 -[MonitoredInvocation invoke] + 225
13 CoreMessage 0x00007fff8cff8e22 -[ThrowingInvocationOperation main] + 33
14 CoreMessage 0x00007fff8cfa4f82 -[_MFInvocationOperation main] + 431
15 Foundation 0x00007fff83bbb926 -[__NSOperationInternal start] + 684
16 Foundation 0x00007fff83bc30f1 __block_global_6 + 129
17 libdispatch.dylib 0x00007fff8b2e9f01 _dispatch_call_block_and_release + 15
18 libdispatch.dylib 0x00007fff8b2e60b6 _dispatch_client_callout + 8
19 libdispatch.dylib 0x00007fff8b2e71fa _dispatch_worker_thread2 + 304
20 libsystem_c.dylib 0x00007fff89fb7cdb _pthread_wqthread + 404
21 libsystem_c.dylib 0x00007fff89fa2191 start_wqthread + 13
24/9/13 11:19:26,862 μ.μ. Mail[3161]: An exception occurred during invocation of -[MailboxesController _writeSmartMailboxesToDisk]
24/9/13 11:19:26,863 μ.μ. Mail[3161]: *** -[NSSet initWithArray:range:copyItems:]: array argument is not an NSArray
24/9/13 11:19:26,864 μ.μ. Mail[3161]: (
0 CoreFoundation 0x00007fff8e11cb06 __exceptionPreprocess + 198
1 libobjc.A.dylib 0x00007fff8df813f0 objc_exception_throw + 43
2 CoreFoundation 0x00007fff8e0fb454 -[NSSet initWithArray:range:copyItems:] + 212
3 Message 0x00007fff847b148c -[SmartMailboxUnreadCountManager smartMailbox:didInitializeWithDictionaryRepresentation:] + 98
4 Message 0x00007fff847b0cac -[MailboxUid initWithDictionaryRepresentation:] + 1289
5 Mail 0x00000001074b422b Mail + 33323
6 Mail 0x00000001074b3cbf Mail + 31935
7 Mail 0x00000001074b3990 Mail + 31120
8 Mail 0x0000000107649df0 Mail + 1695216
9 Mail 0x0000000107537d95 Mail + 572821
10 CoreFoundation 0x00007fff8e11009c __invoking___ + 140
11 CoreFoundation 0x00007fff8e10ff37 -[NSInvocation invoke] + 263
12 CoreMessage 0x00007fff8cfe07d7 -[MonitoredInvocation invoke] + 225
13 CoreMessage 0x00007fff8cff8e22 -[ThrowingInvocationOperation main] + 33
14 CoreMessage 0x00007fff8cfa4f82 -[_MFInvocationOperation main] + 431
15 Foundation 0x00007fff83bbb926 -[__NSOperationInternal start] + 684
16 Foundation 0x00007fff83bc30f1 __block_global_6 + 129
17 libdispatch.dylib 0x00007fff8b2e9f01 _dispatch_call_block_and_release + 15
18 libdispatch.dylib 0x00007fff8b2e60b6 _dispatch_client_callout + 8
19 libdispatch.dylib 0x00007fff8b2e71fa _dispatch_worker_thread2 + 304
20 libsystem_c.dylib 0x00007fff89fb7cdb _pthread_wqthread + 404
21 libsystem_c.dylib 0x00007fff89fa2191 start_wqthread + 13
24/9/13 11:19:56,957 μ.μ. Mail[3161]: An exception occurred during invocation of -[MailboxesController _writeSmartMailboxesToDisk]
24/9/13 11:19:56,957 μ.μ. Mail[3161]: *** -[NSSet initWithArray:range:copyItems:]: array argument is not an NSArray
24/9/13 11:19:56,959 μ.μ. Mail[3161]: (
0 CoreFoundation 0x00007fff8e11cb06 __exceptionPreprocess + 198
1 libobjc.A.dylib 0x00007fff8df813f0 objc_exception_throw + 43
2 CoreFoundation 0x00007fff8e0fb454 -[NSSet initWithArray:range:copyItems:] + 212
3 Message 0x00007fff847b148c -[SmartMailboxUnreadCountManager smartMailbox:didInitializeWithDictionaryRepresentation:] + 98
4 Message 0x00007fff847b0cac -[MailboxUid initWithDictionaryRepresentation:] + 1289
5 Mail 0x00000001074b422b Mail + 33323
6 Mail 0x00000001074b3cbf Mail + 31935
7 Mail 0x00000001074b3990 Mail + 31120
8 Mail 0x0000000107649df0 Mail + 1695216
9 Mail 0x0000000107537d95 Mail + 572821
10 CoreFoundation 0x00007fff8e11009c __invoking___ + 140
11 CoreFoundation 0x00007fff8e10ff37 -[NSInvocation invoke] + 263
12 CoreMessage 0x00007fff8cfe07d7 -[MonitoredInvocation invoke] + 225
13 CoreMessage 0x00007fff8cff8e22 -[ThrowingInvocationOperation main] + 33
14 CoreMessage 0x00007fff8cfa4f82 -[_MFInvocationOperation main] + 431
15 Foundation 0x00007fff83bbb926 -[__NSOperationInternal start] + 684
16 Foundation 0x00007fff83bc30f1 __block_global_6 + 129
17 libdispatch.dylib 0x00007fff8b2e9f01 _dispatch_call_block_and_release + 15
18 libdispatch.dylib 0x00007fff8b2e60b6 _dispatch_client_callout + 8
19 libdispatch.dylib 0x00007fff8b2e71fa _dispatch_worker_thread2 + 304
20 libsystem_c.dylib 0x00007fff89fb7cdb _pthread_wqthread + 404
21 libsystem_c.dylib 0x00007fff89fa2191 start_wqthread + 13
24/9/13 11:20:26,962 μ.μ. Mail[3161]: An exception occurred during invocation of -[MailboxesController _writeSmartMailboxesToDisk]
24/9/13 11:20:26,962 μ.μ. Mail[3161]: *** -[NSSet initWithArray:range:copyItems:]: array argument is not an NSArray
24/9/13 11:20:26,963 μ.μ. Mail[3161]: (
0 CoreFoundation 0x00007fff8e11cb06 __exceptionPreprocess + 198
1 libobjc.A.dylib 0x00007fff8df813f0 objc_exception_throw + 43
2 CoreFoundation 0x00007fff8e0fb454 -[NSSet initWithArray:range:copyItems:] + 212
3 Message 0x00007fff847b148c -[SmartMailboxUnreadCountManager smartMailbox:didInitializeWithDictionaryRepresentation:] + 98
4 Message 0x00007fff847b0cac -[MailboxUid initWithDictionaryRepresentation:] + 1289
5 Mail 0x00000001074b422b Mail + 33323
6 Mail 0x00000001074b3cbf Mail + 31935
7 Mail 0x00000001074b3990 Mail + 31120
8 Mail 0x0000000107649df0 Mail + 1695216
9 Mail 0x0000000107537d95 Mail + 572821
10 CoreFoundation 0x00007fff8e11009c __invoking___ + 140
11 CoreFoundation 0x00007fff8e10ff37 -[NSInvocation invoke] + 263
12 CoreMessage 0x00007fff8cfe07d7 -[MonitoredInvocation invoke] + 225
13 CoreMessage 0x00007fff8cff8e22 -[ThrowingInvocationOperation main] + 33
14 CoreMessage 0x00007fff8cfa4f82 -[_MFInvocationOperation main] + 431
15 Foundation 0x00007fff83bbb926 -[__NSOperationInternal start] + 684
16 Foundation 0x00007fff83bc30f1 __block_global_6 + 129
17 libdispatch.dylib 0x00007fff8b2e9f01 _dispatch_call_block_and_release + 15
18 libdispatch.dylib 0x00007fff8b2e60b6 _dispatch_client_callout + 8
19 libdispatch.dylib 0x00007fff8b2e71fa _dispatch_worker_thread2 + 304
20 libsystem_c.dylib 0x00007fff89fb7cdb _pthread_wqthread + 404
21 libsystem_c.dylib 0x00007fff89fa2191 start_wqthread + 13
24/9/13 11:20:57,310 μ.μ. Mail[3161]: An exception occurred during invocation of -[MailboxesController _writeSmartMailboxesToDisk]
24/9/13 11:20:57,311 μ.μ. Mail[3161]: *** -[NSSet initWithArray:range:copyItems:]: array argument is not an NSArray
24/9/13 11:20:57,312 μ.μ. Mail[3161]: (
0 CoreFoundation 0x00007fff8e11cb06 __exceptionPreprocess + 198
1 libobjc.A.dylib 0x00007fff8df813f0 objc_exception_throw + 43
2 CoreFoundation 0x00007fff8e0fb454 -[NSSet initWithArray:range:copyItems:] + 212
3 Message 0x00007fff847b148c -[SmartMailboxUnreadCountManager smartMailbox:didInitializeWithDictionaryRepresentation:] + 98
4 Message 0x00007fff847b0cac -[MailboxUid initWithDictionaryRepresentation:] + 1289
5 Mail 0x00000001074b422b Mail + 33323
6 Mail 0x00000001074b3cbf Mail + 31935
7 Mail 0x00000001074b3990 Mail + 31120
8 Mail 0x0000000107649df0 Mail + 1695216
9 Mail 0x0000000107537d95 Mail + 572821
10 CoreFoundation 0x00007fff8e11009c __invoking___ + 140
11 CoreFoundation 0x00007fff8e10ff37 -[NSInvocation invoke] + 263
12 CoreMessage 0x00007fff8cfe07d7 -[MonitoredInvocation invoke] + 225
13 CoreMessage 0x00007fff8cff8e22 -[ThrowingInvocationOperation main] + 33
14 CoreMessage 0x00007fff8cfa4f82 -[_MFInvocationOperation main] + 431
15 Foundation 0x00007fff83bbb926 -[__NSOperationInternal start] + 684
16 Foundation 0x00007fff83bc30f1 __block_global_6 + 129
17 libdispatch.dylib 0x00007fff8b2e9f01 _dispatch_call_block_and_release + 15
18 libdispatch.dylib 0x00007fff8b2e60b6 _dispatch_client_callout + 8
19 libdispatch.dylib 0x00007fff8b2e71fa _dispatch_worker_thread2 + 304
20 libsystem_c.dylib 0x00007fff89fb7cdb _pthread_wqthread + 404
21 libsystem_c.dylib 0x00007fff89fa2191 start_wqthread + 13
24/9/13 11:21:06,290 μ.μ. WindowServer[2287]: CGXDisableUpdate: UI updates were forcibly disabled by application "Mail" for over 1.00 seconds. Server has re-enabled them.
24/9/13 11:21:06,308 μ.μ. WindowServer[2287]: reenable_update_for_connection: UI updates were finally reenabled by application "Mail" after 1.03 seconds (server forcibly re-enabled them after 1.01 seconds)
24/9/13 11:21:27,315 μ.μ. Mail[3161]: An exception occurred during invocation of -[MailboxesController _writeSmartMailboxesToDisk]
24/9/13 11:21:27,316 μ.μ. Mail[3161]: *** -[NSSet initWithArray:range:copyItems:]: array argument is not an NSArray
24/9/13 11:21:27,317 μ.μ. Mail[3161]: (
0 CoreFoundation 0x00007fff8e11cb06 __exceptionPreprocess + 198
1 libobjc.A.dylib 0x00007fff8df813f0 objc_exception_throw + 43
2 CoreFoundation 0x00007fff8e0fb454 -[NSSet initWithArray:range:copyItems:] + 212
3 Message 0x00007fff847b148c -[SmartMailboxUnreadCountManager smartMailbox:didInitializeWithDictionaryRepresentation:] + 98
4 Message 0x00007fff847b0cac -[MailboxUid initWithDictionaryRepresentation:] + 1289
5 Mail 0x00000001074b422b Mail + 33323
6 Mail 0x00000001074b3cbf Mail + 31935
7 Mail 0x00000001074b3990 Mail + 31120
8 Mail 0x0000000107649df0 Mail + 1695216
9 Mail 0x0000000107537d95 Mail + 572821
10 CoreFoundation 0x00007fff8e11009c __invoking___ + 140
11 CoreFoundation 0x00007fff8e10ff37 -[NSInvocation invoke] + 263
12 CoreMessage 0x00007fff8cfe07d7 -[MonitoredInvocation invoke] + 225
13 CoreMessage 0x00007fff8cff8e22 -[ThrowingInvocationOperation main] + 33
14 CoreMessage 0x00007fff8cfa4f82 -[_MFInvocationOperation main] + 431
15 Foundation 0x00007fff83bbb926 -[__NSOperationInternal start] + 684
16 Foundation 0x00007fff83bc30f1 __block_global_6 + 129
17 libdispatch.dylib 0x00007fff8b2e9f01 _dispatch_call_block_and_release + 15
18 libdispatch.dylib 0x00007fff8b2e60b6 _dispatch_client_callout + 8
19 libdispatch.dylib 0x00007fff8b2e71fa _dispatch_worker_thread2 + 304
20 libsystem_c.dylib 0x00007fff89fb7cdb _pthread_wqthread + 404
21 libsystem_c.dylib 0x00007fff89fa2191 start_wqthread + 13
24/9/13 11:28:03,262 μ.μ. Mail[3161]: An uncaught exception was raised
24/9/13 11:28:03,262 μ.μ. Mail[3161]: *** -[NSSet initWithArray:range:copyItems:]: array argument is not an NSArray
24/9/13 11:28:03,266 μ.μ. Mail[3161]: (
0 CoreFoundation 0x00007fff8e11cb06 __exceptionPreprocess + 198
1 libobjc.A.dylib 0x00007fff8df813f0 objc_exception_throw + 43
2 CoreFoundation 0x00007fff8e0fb454 -[NSSet initWithArray:range:copyItems:] + 212
3 Message 0x00007fff847b148c -[SmartMailboxUnreadCountManager smartMailbox:didInitializeWithDictionaryRepresentation:] + 98
4 Message 0x00007fff847b0cac -[MailboxUid initWithDictionaryRepresentation:] + 1289
5 Mail 0x00000001074b422b Mail + 33323
6 Mail 0x00000001074b3cbf Mail + 31935
7 Mail 0x00000001074b3990 Mail + 31120
8 Mail 0x00000001074b6c7f Mail + 44159
9 Mail 0x00000001074b6133 Mail + 41267
10 Mail 0x000000010764fd73 Mail + 1719667
11 libdispatch.dylib 0x00007fff8b2e60b6 _dispatch_client_callout + 8
12 libdispatch.dylib 0x00007fff8b2e6041 dispatch_once_f + 50
13 Mail 0x00000001074b5fe8 Mail + 40936
14 Mail 0x00000001074b5ea6 Mail + 40614
15 CoreFoundation 0x00007fff8e1148e9 -[NSSet makeObjectsPerformSelector:] + 201
16 AppKit 0x00007fff88bdc136 -[NSIBObjectData nibInstantiateWithOwner:topLevelObjects:] + 1168
17 AppKit 0x00007fff88bbb11d loadNib + 317
18 AppKit 0x00007fff88bba649 +[NSBundle(NSNibLoading) _loadNibFile:nameTable:withZone:ownerBundle:] + 219
19 AppKit 0x00007fff88df7653 -[NSBundle(NSNibLoading) loadNibFile:externalNameTable:withZone:] + 150
20 CoreMessage 0x00007fff8cfe83d6 -[NSBundle(MessageFrameworkAdditions) loadNibNamed:owner:] + 95
21 Mail 0x00000001074b5002 Mail + 36866
22 Mail 0x00000001074b4ecc Mail + 36556
23 Mail 0x000000010762d8ac Mail + 1579180
24 AppKit 0x00007fff88d0b959 -[NSApplication sendAction:to:from:] + 342
25 AppKit 0x00007fff88e4136c -[NSMenuItem _corePerformAction] + 406
26 AppKit 0x00007fff88e4105a -[NSCarbonMenuImpl performActionWithHighlightingForItemAtIndex:] + 133
27 AppKit 0x00007fff88b2e20f -[NSMenu _internalPerformActionForItemAtIndex:] + 36
28 AppKit 0x00007fff88b2e097 -[NSCarbonMenuImpl _carbonCommandProcessEvent:handlerCallRef:] + 135
29 AppKit 0x00007fff88e3a165 NSSLMMenuEventHandler + 342
30 HIToolbox 0x00007fff8ed9ed1a _ZL23DispatchEventToHandlersP14EventTargetRecP14OpaqueEventRefP14HandlerCallRec + 1206
31 HIToolbox 0x00007fff8ed9e1e9 _ZL30SendEventToEventTargetInternalP14OpaqueEventRefP20OpaqueEventTargetRefP14H andlerCallRec + 410
32 HIToolbox 0x00007fff8edb3fc9 SendEventToEventTarget + 40
33 HIToolbox 0x00007fff8edeaca9 _ZL18SendHICommandEventjPK9HICommandjjhPKvP20OpaqueEventTargetRefS5_PP14OpaqueE ventRef + 443
34 HIToolbox 0x00007fff8ed8fa21 SendMenuCommandWithContextAndModifiers + 59
35 HIToolbox 0x00007fff8ed8f9d3 SendMenuItemSelectedEvent + 254
36 HIToolbox 0x00007fff8ed8f85f _ZL19FinishMenuSelectionP13SelectionDataP10MenuResultS2_ + 94
37 HIToolbox 0x00007fff8ed6b8bb _ZL14MenuSelectCoreP8MenuData5PointdjPP13OpaqueMenuRefPt + 605
38 HIToolbox 0x00007fff8ed6aec8 _HandleMenuSelection2 + 565
39 AppKit 0x00007fff88cf98c6 _NSHandleCarbonMenuEvent + 245
40 AppKit 0x00007fff88c1ba9f _DPSNextEvent + 2073
41 AppKit 0x00007fff88c1adf2 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 128
42 AppKit 0x00007fff88c121a3 -[NSApplication run] + 517
43 AppKit 0x00007fff88bb6bd6 NSApplicationMain + 869
44 libdyld.dylib 0x00007fff8883b7e1 start + 0
45 ??? 0x0000000000000002 0x0 + 2
24/9/13 11:28:03,268 μ.μ. Mail[3161]: *** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '*** -[NSSet initWithArray:range:copyItems:]: array argument is not an NSArray'
*** First throw call stack:
0 CoreFoundation 0x00007fff8e11cb06 __exceptionPreprocess + 198
1 libobjc.A.dylib 0x00007fff8df813f0 objc_exception_throw + 43
2 CoreFoundation 0x00007fff8e0fb454 -[NSSet initWithArray:range:copyItems:] + 212
3 Message 0x00007fff847b148c -[SmartMailboxUnreadCountManager smartMailbox:didInitializeWithDictionaryRepresentation:] + 98
4 Message 0x00007fff847b0cac -[MailboxUid initWithDictionaryRepresentation:] + 1289
5 Mail 0x00000001074b422b Mail + 33323
6 Mail 0x00000001074b3cbf Mail + 31935
7 Mail 0x00000001074b3990 Mail + 31120
8 Mail 0x00000001074b6c7f Mail + 44159
9 Mail 0x00000001074b6133 Mail + 41267
10 Mail 0x000000010764fd73 Mail + 1719667
11 libdispatch.dylib 0x00007fff8b2e60b6 _dispatch_client_callout + 8
12 libdispatch.dylib 0x00007fff8b2e6041 dispatch_once_f + 50
13 Mail 0x00000001074b5fe8 Mail + 40936
14 Mail 0x00000001074b5ea6 Mail + 40614
15 CoreFoundation 0x00007fff8e1148e9 -[NSSet makeObjectsPerformSelector:] + 201
16 AppKit 0x00007fff88bdc136 -[NSIBObjectData nibInstantiateWithOwner:topLevelObjects:] + 1168
17 AppKit 0x00007fff88bbb11d loadNib + 317
18 AppKit 0x00007fff88bba649 +[NSBundle(NSNibLoading) _loadNibFile:nameTable:withZone:ownerBundle:] + 219
19 AppKit 0x00007fff88df7653 -[NSBundle(NSNibLoading) loadNibFile:externalNameTable:withZone:] + 150
20 CoreMessage 0x00007fff8cfe83d6 -[NSBundle(MessageFrameworkAdditions) loadNibNamed:owner:] + 95
21 Mail 0x00000001074b5002 Mail + 36866
22 Mail 0x00000001074b4ecc Mail + 36556
23 Mail 0x000000010762d8ac Mail + 1579180
24 AppKit 0x00007fff88d0b959 -[NSApplication sendAction:to:from:] + 342
25 AppKit 0x00007fff88e4136c -[NSMenuItem _corePerformAction] + 406
26 AppKit 0x00007fff88e4105a -[NSCarbonMenuImpl performActionWithHighlightingForItemAtIndex:] + 133
27 AppKit 0x00007fff88b2e20f -[NSMenu _internalPerformActionForItemAtIndex:] + 36
28 AppKit 0x00007fff88b2e097 -[NSCarbonMenuImpl _carbonCommandProcessEvent:handlerCallRef:] + 135
29 AppKit 0x00007fff88e3a165 NSSLMMenuEventHandler + 342
30 HIToolbox 0x00007fff8ed9ed1a _ZL23DispatchEventToHandlersP14EventTargetRecP14OpaqueEventRefP14HandlerCallRec + 1206
31 HIToolbox 0x00007fff8ed9e1e9 _ZL30SendEventToEventTargetInternalP14OpaqueEventRefP20OpaqueEventTargetRefP14H andlerCallRec + 410
32 HIToolbox 0x00007fff8edb3fc9 SendEventToEventTarget + 40
33 HIToolbox 0x00007fff8edeaca9 _ZL18SendHICommandEventjPK9HICommandjjhPKvP20OpaqueEventTargetRefS5_PP14OpaqueE ventRef + 443
34 HIToolbox 0x00007fff8ed8fa21 SendMenuCommandWithContextAndModifiers + 59
35 HIToolbox 0x00007fff8ed8f9d3 SendMenuItemSelectedEvent + 254
36 HIToolbox 0x00007fff8ed8f85f _ZL19FinishMenuSelectionP13SelectionDataP10MenuResultS2_ + 94
37 HIToolbox 0x00007fff8ed6b8bb _ZL14MenuSelectCoreP8MenuData5PointdjPP13OpaqueMenuRefPt + 605
38 HIToolbox 0x00007fff8ed6aec8 _HandleMenuSelection2 + 565
39 AppKit 0x00007fff88cf98c6 _NSHandleCarbonMenuEvent + 245
40 AppKit 0x00007fff88c1ba9f _DPSNextEvent + 2073
41 AppKit 0x00007fff88c1adf2 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 128
42 AppKit 0x00007fff88c121a3 -[NSApplication run] + 517
43 AppKit 0x00007fff88bb6bd6 NSApplicationMain + 869
44 libdyld.dylib 0x00007fff8883b7e1 start + 0
45 ??? 0x0000000000000002 0x0 + 2
24/9/13 11:28:04,903 μ.μ. com.apple.launchd.peruser.506[2322]: ([0x0-0x307307].com.apple.mail[3161]) Job appears to have crashed: Abort trap: 6
24/9/13 11:28:08,393 μ.μ. ReportCrash[3465]: Saved crash report for Mail[3161] version 6.6 (1510) to /Users/------/Library/Logs/DiagnosticReports/Mail_2013-09-24-232808_----------- ---.crash
24/9/13 11:44:24,585 μ.μ. Mail[3744]: Using V2 Layout
24/9/13 11:44:27,235 μ.μ. Mail[3744]: *** -[NSSet initWithArray:range:copyItems:]: array argument is not an NSArray
24/9/13 11:44:33,389 μ.μ. Mail[3744]: An uncaught exception was raised
Step 2
Process: Mail [3744]
Path: /Applications/Mail.app/Contents/MacOS/Mail
Identifier: com.apple.mail
Version: 6.6 (1510)
Build Info: Mail-1510000000000000~1
Code Type: X86-64 (Native)
Parent Process: launchd [2322]
User ID: 506
Date/Time: 2013-09-24 23:48:10.137 +0300
OS Version: Mac OS X 10.8.5 (12F37)
Report Version: 10
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_CRASH (SIGABRT)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Application Specific Information:
*** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '*** -[NSSet initWithArray:range:copyItems:]: array argument is not an NSArray'
Performing @selector(newViewerWindow:) from sender NSMenuItem 0x7fb33ac74df0
abort() called
terminate called throwing an exception
Application Specific Backtrace 1:
0 CoreFoundation 0x00007fff8e11cb06 __exceptionPreprocess + 198
1 libobjc.A.dylib 0x00007fff8df813f0 objc_exception_throw + 43
2 CoreFoundation 0x00007fff8e0fb454 -[NSSet initWithArray:range:copyItems:] + 212
3 Message 0x00007fff847b148c -[SmartMailboxUnreadCountManager smartMailbox:didInitializeWithDictionaryRepresentation:] + 98
4 Message 0x00007fff847b0cac -[MailboxUid initWithDictionaryRepresentation:] + 1289
5 Mail 0x000000010dae822b Mail + 33323
6 Mail 0x000000010dae7cbf Mail + 31935
7 Mail 0x000000010dae7990 Mail + 31120
8 Mail 0x000000010daeac7f Mail + 44159
9 Mail 0x000000010daea133 Mail + 41267
10 Mail 0x000000010dc83d73 Mail + 1719667
11 libdispatch.dylib 0x00007fff8b2e60b6 _dispatch_client_callout + 8
12 libdispatch.dylib 0x00007fff8b2e6041 dispatch_once_f + 50
13 Mail 0x000000010dae9fe8 Mail + 40936
14 Mail 0x000000010dae9ea6 Mail + 40614
15 CoreFoundation 0x00007fff8e1148e9 -[NSSet makeObjectsPerformSelector:] + 201
16 AppKit 0x00007fff88bdc136 -[NSIBObjectData nibInstantiateWithOwner:topLevelObjects:] + 1168
17 AppKit 0x00007fff88bbb11d loadNib + 317
18 AppKit 0x00007fff88bba649 +[NSBundle(NSNibLoading) _loadNibFile:nameTable:withZone:ownerBundle:] + 219
19 AppKit 0x00007fff88df7653 -[NSBundle(NSNibLoading) loadNibFile:externalNameTable:withZone:] + 150
20 CoreMessage 0x00007fff8cfe83d6 -[NSBundle(MessageFrameworkAdditions) loadNibNamed:owner:] + 95
21 Mail 0x000000010dae9002 Mail + 36866
22 Mail 0x000000010dae8ecc Mail + 36556
23 AppKit 0x00007fff88d0b959 -[NSApplication sendAction:to:from:] + 342
24 AppKit 0x00007fff88e4136c -[NSMenuItem _corePerformAction] + 406
25 AppKit 0x00007fff88e4105a -[NSCarbonMenuImpl performActionWithHighlightingForItemAtIndex:] + 133
26 AppKit 0x00007fff88b2e20f -[NSMenu _internalPerformActionForItemAtIndex:] + 36
27 AppKit 0x00007fff88b2e097 -[NSCarbonMenuImpl _carbonCommandProcessEvent:handlerCallRef:] + 135
28 AppKit 0x00007fff88e3a165 NSSLMMenuEventHandler + 342
29 HIToolbox 0x00007fff8ed9ed1a _ZL23DispatchEventToHandlersP14EventTargetRecP14OpaqueEventRefP14HandlerCallRec + 1206
30 HIToolbox 0x00007fff8ed9e1e9 _ZL30SendEventToEventTargetInternalP14OpaqueEventRefP20OpaqueEventTargetRefP14H andlerCallRec + 410
31 HIToolbox 0x00007fff8edb3fc9 SendEventToEventTarget + 40
32 HIToolbox 0x00007fff8edeaca9 _ZL18SendHICommandEventjPK9HICommandjjhPKvP20OpaqueEventTargetRefS5_PP14OpaqueE ventRef + 443
33 HIToolbox 0x00007fff8ed8fa21 SendMenuCommandWithContextAndModifiers + 59
34 HIToolbox 0x00007fff8ed8f9d3 SendMenuItemSelectedEvent + 254
35 HIToolbox 0x00007fff8ed8f85f _ZL19FinishMenuSelectionP13SelectionDataP10MenuResultS2_ + 94
36 HIToolbox 0x00007fff8ed6b8bb _ZL14MenuSelectCoreP8MenuData5PointdjPP13OpaqueMenuRefPt + 605
37 HIToolbox 0x00007fff8ed6aec8 _HandleMenuSelection2 + 565
38 AppKit 0x00007fff88cf98c6 _NSHandleCarbonMenuEvent + 245
39 AppKit 0x00007fff88c1ba9f _DPSNextEvent + 2073
40 AppKit 0x00007fff88c1adf2 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 128
41 AppKit 0x00007fff88c121a3 -[NSApplication run] + 517
42 AppKit 0x00007fff88bb6bd6 NSApplicationMain + 869
43 libdyld.dylib 0x00007fff8883b7e1 start + 0
44 ??? 0x0000000000000002 0x0 + 2
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0 libsystem_kernel.dylib 0x00007fff8be9d212 __pthread_kill + 10
1 libsystem_c.dylib 0x00007fff89fb6b24 pthread_kill + 90
2 libsystem_c.dylib 0x00007fff89ffaf61 abort + 143
3 libc++abi.dylib 0x00007fff884b69eb abort_message + 257
4 libc++abi.dylib 0x00007fff884b439a default_terminate() + 28
5 libobjc.A.dylib 0x00007fff8df81873 _objc_terminate() + 91
6 libc++.1.dylib 0x00007fff8dcc68fe std::terminate() + 20
7 libobjc.A.dylib 0x00007fff8df815de objc_terminate + 9
8 libdispatch.dylib 0x00007fff8b2e60ca _dispatch_client_callout + 28
9 libdispatch.dylib 0x00007fff8b2e6041 dispatch_once_f + 50
10 com.apple.mail 0x000000010dae9fe8 0x10dae0000 + 40936
11 com.apple.mail 0x000000010dae9ea6 0x10dae0000 + 40614
12 com.apple.CoreFoundation 0x00007fff8e1148e9 -[NSSet makeObjectsPerformSelector:] + 201
13 com.apple.AppKit 0x00007fff88bdc136 -[NSIBObjectData nibInstantiateWithOwner:topLevelObjects:] + 1168
14 com.apple.AppKit 0x00007fff88bbb11d loadNib + 317
15 com.apple.AppKit 0x00007fff88bba649 +[NSBundle(NSNibLoading) _loadNibFile:nameTable:withZone:ownerBundle:] + 219
16 com.apple.AppKit 0x00007fff88df7653 -[NSBundle(NSNibLoading) loadNibFile:externalNameTable:withZone:] + 150
17 com.apple.CoreMessage 0x00007fff8cfe83d6 -[NSBundle(MessageFrameworkAdditions) loadNibNamed:owner:] + 95
18 com.apple.mail 0x000000010dae9002 0x10dae0000 + 36866
19 com.apple.mail 0x000000010dae8ecc 0x10dae0000 + 36556
20 com.apple.AppKit 0x00007fff88d0b959 -[NSApplication sendAction:to:from:] + 342
21 com.apple.AppKit 0x00007fff88e4136c -[NSMenuItem _corePerformAction] + 406
22 com.apple.AppKit 0x00007fff88e4105a -[NSCarbonMenuImpl performActionWithHighlightingForItemAtIndex:] + 133
23 com.apple.AppKit 0x00007fff88b2e20f -[NSMenu _internalPerformActionForItemAtIndex:] + 36
24 com.apple.AppKit 0x00007fff88b2e097 -[NSCarbonMenuImpl _carbonCommandProcessEvent:handlerCallRef:] + 135
25 com.apple.AppKit 0x00007fff88e3a165 NSSLMMenuEventHandler + 342
26 com.apple.HIToolbox 0x00007fff8ed9ed1a DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 1206
27 com.apple.HIToolbox 0x00007fff8ed9e1e9 SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 410
28 com.apple.HIToolbox 0x00007fff8edb3fc9 SendEventToEventTarget + 40
29 com.apple.HIToolbox 0x00007fff8edeaca9 SendHICommandEvent(unsigned int, HICommand const*, unsigned int, unsigned int, unsigned char, void const*, OpaqueEventTargetRef*, OpaqueEventTargetRef*, OpaqueEventRef**) + 443
30 com.apple.HIToolbox 0x00007fff8ed8fa21 SendMenuCommandWithContextAndModifiers + 59
31 com.apple.HIToolbox 0x00007fff8ed8f9d3 SendMenuItemSelectedEvent + 254
32 com.apple.HIToolbox 0x00007fff8ed8f85f FinishMenuSelection(SelectionData*, MenuResult*, MenuResult*) + 94
33 com.apple.HIToolbox 0x00007fff8ed6b8bb MenuSelectCore(MenuData*, Point, double, unsigned int, OpaqueMenuRef**, unsigned short*) + 605
34 com.apple.HIToolbox 0x00007fff8ed6aec8 _HandleMenuSelection2 + 565
35 com.apple.AppKit 0x00007fff88cf98c6 _NSHandleCarbonMenuEvent + 245
36 com.apple.AppKit 0x00007fff88c1ba9f _DPSNextEvent + 2073
37 com.apple.AppKit 0x00007fff88c1adf2 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 128
38 com.apple.AppKit 0x00007fff88c121a3 -[NSApplication run] + 517
39 com.apple.AppKit 0x00007fff88bb6bd6 NSApplicationMain + 869
40 libdyld.dylib 0x00007fff8883b7e1 start + 1
Thread 1:: Dispatch queue: com.apple.libdispatch-manager
0 libsystem_kernel.dylib 0x00007fff8be9dd16 kevent + 10
1 libdispatch.dylib 0x00007fff8b2e8dea _dispatch_mgr_invoke + 883
2 libdispatch.dylib 0x00007fff8b2e89ee _dispatch_mgr_thread + 54
Thread 2:: com.apple.NSURLConnectionLoader
0 libsystem_kernel.dylib 0x00007fff8be9b686 mach_msg_trap + 10
1 libsystem_kernel.dylib 0x00007fff8be9ac42 mach_msg + 70
2 com.apple.CoreFoundation 0x00007fff8e0b9233 __CFRunLoopServiceMachPort + 195
3 com.apple.CoreFoundation 0x00007fff8e0be916 __CFRunLoopRun + 1078
4 com.apple.CoreFoundation 0x00007fff8e0be0e2 CFRunLoopRunSpecific + 290
5 com.apple.Foundation 0x00007fff83b64546 +[NSURLConnection(Loader) _resourceLoadLoop:] + 356
6 com.apple.Foundation 0x00007fff83bc2562 __NSThread__main__ + 1345
7 libsystem_c.dylib 0x00007fff89fb5772 _pthread_start + 327
8 libsystem_c.dylib 0x00007fff89fa21a1 thread_start + 13
Thread 3:: JavaScriptCore::BlockFree
0 libsystem_kernel.dylib 0x00007fff8be9d0fa __psynch_cvwait + 10
1 libsystem_c.dylib 0x00007fff89fb9fb9 _pthread_cond_wait + 869
2 com.apple.JavaScriptCore 0x00007fff8d92eb66 ***::ThreadCondition::timedWait(***::Mutex&, double) + 118
3 com.apple.JavaScriptCore 0x00007fff8db51bfa JSC::BlockAllocator::blockFreeingThreadMain() + 90
4 com.apple.JavaScriptCore 0x00007fff8db6725f ***::wtfThreadEntryPoint(void*) + 15
5 libsystem_c.dylib 0x00007fff89fb5772 _pthread_start + 327
6 libsystem_c.dylib 0x00007fff89fa21a1 thread_start + 13
Thread 4:: JavaScriptCore::Marking
0 libsystem_kernel.dylib 0x00007fff8be9d0fa __psynch_cvwait + 10
1 libsystem_c.dylib 0x00007fff89fb9fb9 _pthread_cond_wait + 869
2 com.apple.JavaScriptCore 0x00007fff8dab49d4 JSC::SlotVisitor::drainFromShared(JSC::SlotVisitor::SharedDrainMode) + 212
3 com.apple.JavaScriptCore 0x00007fff8dab48b6 JSC::MarkStackThreadSharedData::markingThreadMain() + 214
4 com.apple.JavaScriptCore 0x00007fff8db6725f ***::wtfThreadEntryPoint(void*) + 15
5 libsystem_c.dylib 0x00007fff89fb5772 _pthread_start + 327
6 libsystem_c.dylib 0x00007fff89fa21a1 thread_start + 13
Thread 5:
0 libsystem_kernel.dylib 0x00007fff8be9b686 mach_msg_trap + 10
1 libsystem_kernel.dylib 0x00007fff8be9ac42 mach_msg + 70
2 com.apple.CoreFoundation 0x00007fff8e0b9233 __CFRunLoopServiceMachPort + 195
3 com.apple.CoreFoundation 0x00007fff8e0be916 __CFRunLoopRun + 1078
4 com.apple.CoreFoundation 0x00007fff8e0be0e2 CFRunLoopRunSpecific + 290
5 com.apple.Foundation 0x00007fff83bc77ee -[NSRunLoop(NSRunLoop) runMode:beforeDate:] + 268
6 com.apple.Foundation 0x00007fff83b601aa -[NSRunLoop(NSRunLoop) run] + 74
7 com.apple.CoreMessage 0x00007fff8cf7dd57 +[_NSSocket _runIOThread] + 77
8 com.apple.Foundation 0x00007fff83bc2562 __NSThread__main__ + 1345
9 libsystem_c.dylib 0x00007fff89fb5772 _pthread_start + 327
10 libsystem_c.dylib 0x00007fff89fa21a1 thread_start + 13
Thread 6:: com.apple.CFSocket.private
0 libsystem_kernel.dylib 0x00007fff8be9d322 __select + 10
1 com.apple.CoreFoundation 0x00007fff8e0fdf46 __CFSocketManager + 1302
2 libsystem_c.dylib 0x00007fff89fb5772 _pthread_start + 327
3 libsystem_c.dylib 0x00007fff89fa21a1 thread_start + 13
Thread 7:
0 libsystem_kernel.dylib 0x00007fff8be9d6d6 __workq_kernreturn + 10
1 libsystem_c.dylib 0x00007fff89fb7f1c _pthread_workq_return + 25
2 libsystem_c.dylib 0x00007fff89fb7ce3 _pthread_wqthread + 412
3 libsystem_c.dylib 0x00007fff89fa2191 start_wqthread + 13
Thread 8:
0 libsystem_kernel.dylib 0x00007fff8be9d6d6 __workq_kernreturn + 10
1 libsystem_c.dylib 0x00007fff89fb7f1c _pthread_workq_return + 25
2 libsystem_c.dylib 0x00007fff89fb7ce3 _pthread_wqthread + 412
3 libsystem_c.dylib 0x00007fff89fa2191 start_wqthread + 13
Thread 9:
0 libsystem_kernel.dylib 0x00007fff8be9d6d6 __workq_kernreturn + 10
1 libsystem_c.dylib 0x00007fff89fb7f1c _pthread_workq_return + 25
2 libsystem_c.dylib 0x00007fff89fb7ce3 _pthread_wqthread + 412
3 libsystem_c.dylib 0x00007fff89fa2191 start_wqthread + 13
Thread 0 crashed with X86 Thread State (64-bit):
rax: 0x0000000000000000 rbx: 0x0000000000000006 rcx: 0x00007fff5211e218 rdx: 0x0000000000000000
rdi: 0x0000000000000c07 rsi: 0x0000000000000006 rbp: 0x00007fff5211e240 rsp: 0x00007fff5211e218
r8: 0x00007fff74393278 r9: 0x000000000000000d r10: 0x0000000020000000 r11: 0x0000000000000206
r12: 0x00007fff5211e3a0 r13: 0x00007fb33bbe43d0 r14: 0x00007fff74394180 r15: 0x00007fff5211e280
rip: 0x00007fff8be9d212 rfl: 0x0000000000000206 cr2: 0x00007fff7438cff0
Logical CPU: 0
Binary Images:
0x10dae0000 - 0x10de7ffff com.apple.mail (6.6 - 1510) <49BBA752-FE19-381B-BD78-1394141471D5> /Applications/Mail.app/Contents/MacOS/Mail
0x10f5c8000 - 0x10f5cafff libanonymous.2.so (166) <6417EA9E-4202-31DA-A086-B58F1E92C931> /usr/lib/sasl2/libanonymous.2.so
0x10f5cf000 - 0x10f5d2fff libcrammd5.2.so (166) <866C8DD4-5086-376A-BFC7-897A40327DB4> /usr/lib/sasl2/libcrammd5.2.so
0x10f5d8000 - 0x10f5dafff apop.so (169) <2A1CAD32-5734-3D4E-868B-E773DCD192B5> /usr/lib/sasl2/apop.so
0x10f5de000 - 0x10f5f2fff dhx.so (169) <3C4D7E51-F30B-3A5B-9BB6-4426EC607E10> /usr/lib/sasl2/dhx.so
0x10fef2000 - 0x10fefbff7 digestmd5WebDAV.so (169) <D1EF0A0E-92FA-321F-9445-DD08A64C2493> /usr/lib/sasl2/digestmd5WebDAV.so
0x10ff04000 - 0x10ff0dff7 libdigestmd5.2.so (166) <F2344A08-F032-35D3-9EBB-F147D4100517> /usr/lib/sasl2/libdigestmd5.2.so
0x10ff13000 - 0x10ff18fff libgssapiv2.2.so (166) <83A21AF3-FB42-3ACC-B6ED-26B23388C4F4> /usr/lib/sasl2/libgssapiv2.2.so
0x10ff1d000 - 0x10ff1ffff login.so (166) <1F868238-FB26-3477-B31C-67DB400D6F68> /usr/lib/sasl2/login.so
0x10ff23000 - 0x10ff28fff libntlm.so (166) <82608FB8-E225-39FF-BC83-B9D3F89D7CEC> /usr/lib/sasl2/libntlm.so
0x10ff2d000 - 0x10ff34fff libotp.2.so (166) <2AE53E63-A826-3E20-9B4D-476CC712410D> /usr/lib/sasl2/libotp.2.so
0x110089000 - 0x11008bfff libplain.2.so (166) <074D7604-3435-3E01-A86B-FF102001FC5B> /usr/lib/sasl2/libplain.2.so
0x11008f000 - 0x110093fff libpps.so (169) <3C150ECF-0D94-3DBE-8AB6-7B0070700699> /usr/lib/sasl2/libpps.so
0x1103dc000 - 0x1103dffff mschapv2.so (169) <9DAC741E-6BB8-3DFA-85AD-532EB20E780B> /usr/lib/sasl2/mschapv2.so
0x1103e4000 - 0x110411fff com.apple.DirectoryService.PasswordServerFramework (10.8 - 27.1) <81194DEC-984F-3099-B537-F70394F8492C> /System/Library/PrivateFrameworks/PasswordServer.framework/Versions/A/PasswordS erver
0x110429000 - 0x11042bfff p -
When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and they no longer play in the monitor window. I hear the sound track, but do not see any video. Have I changed some setting that controls video playback in the monitor window?
Randy Ruttger
Thanks for the follow up.
Missing in this equation were the version of Premiere Elements that you were using and the computer operating system on which it was running. But...
The deed is done. But.....Until now and after you went ahead and moved to version 12, we now learn what version of Premiere Elements you were using. We still do not know the computer operating system involved.
You just said Premiere Elements 10. Premiere Elements 10 is hit by a serious known display issue if the computer uses a NVIDIA GeForce video card/graphics card. In this issue, the only remedy is to roll back the driver version to about May 2013. The description of the problem and how to do the roll back are described in one of the Announcements at the top of this forum. What video card/graphics card does your computer use?
On another front, Adobe will be releasing a new version of Premiere Elements any day now. No one but Adobe knows the feature set for the new version. That type of information is announced at the moment of release of the new version.
So the remedy to the problem that you presented in this thread could have been...
1. Rolling back the NVIDIA GeForce driver version to about May 2013 if possible (Windows 8 or 8.1 64 bit, may not be possible)
2. Move to another version of Premiere Elements (which you did)
I offer the above for consideration so that you can review your decisions. We are pleased to learn that Premiere Elements 12/12.1 works for you.
Please do not hesitate to ask questions and ask for clarifications, but remember that the answers are in the details.
Best wishes,
ATR
Maybe you are looking for
-
Simple Query working on 10G and not working on 11gR2 after upgrade
Hi Folks, This is the first time i am posting the query in this Blog. I have a small issue which preventing the UAT Sigoff. Simple query working fine on 10.2.0.1 and after upgrade to 11.2.0.1 its error out 10.2.0.4: ===== SQL> SELECT COUNT(*) FROM AP
-
HT1937 how i can add the ipad in my acount using the s.n. only
how i can add the ipad to my acount without connecting it to the pc only using the serial number
-
Problem after 10.6.2 update interrupted
Would be great if someone could help me out! Unfortunately my batt ran flat halfway through the most recent Mac OsX update and its left me with a questionable OS state. The main problems I'm currently facing are, 1. long start up times (around 10 min
-
Help raw file 7.5 saved jpeg 1.7mb?? no editing
Hi everyone, im fairly new to photography and photoshop, im use raw when shooting with my camera its only a 10 megapixel not the largest, Anyway as im using raw i have to open it in photoshops camera raw i slightly adjusted the exposure not much i t
-
Can i upgrade to mountain lion on a i mac late 2006 4gb 667 mhz dry
can i upgrade to mountain lion on a i mac late 2006 4gb 667 mhz dry