Can not see ABAP code of programs and FM using SE37, SE38, SE80

Hi, all!
When I try to open ABAP-code using transactions SE37, SE38, SE80, they don't display it. Instead it current mode hangs, but I can open another one.
System ECC 6.0, SAP_ABA package SAPKA70021, GUI Patch 17.
I have 2 laptops, one of them works with these transaction properly, another gives described problem. Other my colleagues don't have such problems.
Can anybody help me to solve this problem?
BR,
Boris

hi friend,
I had the same problem the problem than you, the problem isn´t the gui, the probelm is the msxml parser .
Follow the next sollution and you will solve your problem.
http://scn.sap.com/thread/1853701
My original problem was the "SAP signature theme" was black and with a lot of problems, changing to "Enjoy theme" everything appear works perfecly, but when I tryed to display any source code the screen was thinking without end.
The problem is solved uninstalling any SAP software from your machine also msxml program from SAP and reinstalling first msxml 4.0 and msxml 6.0 after shut down install sap logon behind, when ended everything will work again.
This my actual version and it works.
kind regards,
Miguel Angel Orihuela

Similar Messages

TS1368 i try to charge my ipod 4th generation but can not see the battary been charge and also cannot connect to itunes on my computer

i try to charge my ipod 4th generation but can not see the battary been charge and also cannot connect to itunes on my computer

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

I downloaded lightroom mobile...used it for a day and now i can not see any photos... and there is a message that trial days are 0 ...although i have a cloud subsriptiom, i downloaded lightroom mobile...used it for a day and now i can not see any photos..

i downloaded lightroom mobile...used it for a day and now i can not see any photos... and there is a message that trial days are 0 but i have a paid creative cloud sub

Click the arrow in the Identity Plate and be sure that you are signed in. If you are try going to Help and register.

I bought 2 app store cards and can not see the code on them

i can not redeem my 2 $25 cards because i can't see the codes

Invalid, inactive, or illegible codes
http://support.apple.com/kb/TS1292

Can not see port on 3524xl switch and can not enable any ports.

I have this old 3524xl-en switch in closet, it was not in used, yesterday we new project and I start configuring switch but I can only access it thru consol, I have assign ip but still can not access it, any he help will be appreciated .

Did you assign the IP to "interface vlan 1" or another vlan? Is the "uplink" port that connects the switch to the LAN in the correct VLAN? Have you configured the correct VTY ports with the correct protocol/login ID?

My iMac can not see my mini Mac via Airport extreme using host name, only via IP address. What am I doing wrong ?

I have an iMac and a mini Mac attached to the same Airport extreme. It would appear that Bonjour works because I can see the hostname of the mini Mac server in Finder on the iMac.
But if I type in the host name (myminimac.private) in the Safari browser at the iMac it can not find the mini mac. However if I type in the IP address of the mini mac server it can see the see it.
It used to work but I must have done something to mess it up.
Anybody any suggestions ?

You have the wrong card. You need the original AirPort card for your G4.
...how the **** do i get the Superdrive to open up so i can put in a CD/DVD?
If the keyboard has a media eject key, press that. If not, hold down F12.

I use the browser Chrome OS Vista. I try to open a program that requires access to the microphone but popup does not appear, I can not give permission to the program and can not start it .. can you help me?

Can anyone tell me why not sign-up appears asking for permission?

Chrome uses its own Flash Player. It's called PepperFlash, and it doesn't play well with NPAPI apps and pages, because it's a PPAPI plug-in.
Go into your Chrome Settings. (chrome://settings in the address bar)
Click "Show advanced settings" and go to Privacy.
Click Content Settings...
Check your Media settings and Unsandboxed plug-in access. Your camera should be allowed, and plug-ins should be too.
If they are and it still gives you trouble, download the Flash Player Plug-in (All other browsers).
Install it.
Launch Chrome again.
Type chrome://plugins in the address bar.
Click the "+" for Details at the top right, and scroll to Adobe Flash Player.
You'll see two (2) plug-ins listed; PepperFlash and the one you just installed.
Disable PepperFlash.
Close Chrome and relaunch it. This will force it to "fall back" on the standard plug-in which should work.

Can not see Stored Procedures owned by "Code Owner"

Post Author: BinChen
CA Forum: Deployment
I am using Data Source defined with "CR Oracle ODBC Driver 5.0" in "Data Source (ODBC)".
But in Crystal Report XI, I can not see CodeOwner when I can created a new connection using ODBC (RDO).
I can see CodeOwner and all SP defined under it when I use "Oracle Server" directly or use sqlplus.

Post Author: BinChen
CA Forum: Deployment
I'm using Window XP with Oracle 10g2R
To be more clear,
I have an ODBC Data Source defined as "DEV" and when I created a connection using ODBC, I can only see some database account section like: APP, APPREF, PUBLIC, SYS, SUSTEM. But I can not see CodeOwner.
If I connected without using ODBC, I can also see CODEOWNER and then all its stored procedures.
So why I can not see Stored Procedures defined under CODEOWNER using ODBC?
I have an exsiting report, even I can not see CODEOWNER, but I have no problem to run and preview the report also to "verify database".

How to increase the icons of creative cloude ? The icons permanecm very small and can not see properly.

How to increase the icons of creative cloude ? The icons permanecm very small and can not see properly.

Hold down Control and scroll down with the mouse or trackpad.
Regards,
Captfred
That's the screen zoom function activated by CNTL scroll up to zoom and CNTL-Scroll down to unzoom.

Huups: Can not see my InfoArea and InfoProvider in BEX Designer

Hey,
I wonder why I can not see my newly created InfoArea and InfoProvder in the BEX Designer ?
Anybody knows why ?
It's not related to useing Z Prefix notation.
ThanXs
Martin

Hi Martin,
Check following infoprovider tables and see if your infoproviders are in active version.
InfoCube: RSDCUBE
DSO: RSODSO
and for Infoobject goto transaction RSD1 and check.
And Finally for multiprovider RSDCUBEMULTI
Regards,
Durgesh.
Edited by: Durgesh Gandewar on Jul 19, 2011 2:42 PM

Can not view the code for views, triggers or table definition

Hello Gurus,
I can not see the code for any of the triggers, views, tables etc. in sql developer. For instance a view code will be
"create or replace" and then nothing, I could see the code in the past.
When clicking on SQL tab for table I get following errors
1. Ora-00904 Invalid Column name
2. Ora-31600: invalid input value emit_schema for parameter name in function SET_TRANSFORM_PARAMORA-06512: at SYs.DBMS_SYS_ERROR............................
please advice.
Thanks

Sqldev was only certified starting from 9.0.2, so it's possible that's the culprit. The latest update in the certification document even omits 9i entirely.
Did it start happening after upgrading sqldev? What version are you on?
K.

Background, Images, & text is blacked out. I can not see any menus to edit anything... Help

Background, Images, & text is blacked out. I can not see any menus to edit anything...
The curser shows there are links when you move over. I have uninstalled and re-installed Firefox and restarted my computer with no luck.
I can not see the menus to try and reset Firefox or change any settings.
HELP Please

hello obrienn214, other users with this problem all had an embedded intel hd3000 graphics card with an old driver present. in case this also applies to you, here would be a link to update the driver, which in turn should also address the black firefox problem: https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23764 (for win7 64 bit)
in case this doesn't solve the issue or does not apply to your system, start firefox into safemode '''by pressing the shift key while the application is launching''' & disable hardware acceleration in the firefox ''menu ≡ > options > advanced > general'' (that setting will take a restart of the browser to take effect).
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

I can not see my whole screen on desktop it gets cut off

I can not see my whole desktop screen and I have to scroll to get to buttons such as file. Help

This normally happens when you accidently hit the Control key while scrolling. Hold the control key down and scroll with your mouse or trackpad. One direction will zoom and the other will unzoom.

I can not view pdf's in safari but I use to be able to.

I can not view a pdf in safari and I used to be able to. I can view pdfs in preview but i often click on pdf links and it takes me to a blank page. I have looked into it and I found that adobe acorbat is the recomended viewer for safari. I have tried to find out if i have still got it and I have found a few acrobat plug-ins. Does anybody know how to fix this problem? Thanks

Back up all data.
Quit Safari. In the Finder, select Go ▹ Go to Folder... from the menu bar, or press the key combination shift-command-G. Copy the line of text below into the box that opens, and press return:
/Library/Internet Plug-ins
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then launch Safari and test.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

My code panel has an entirely black background and i can not see the coding how can i correct this?

my code panel has an entirely black background and i can not see the coding how can i correct this?

cs5 , windows, i don't even know how it changed? and yes all files but after 3 hrs burned here at work i figured it out:
Before:
click the format source code button
Preferance panel will show up>code coloring>Default Background
Correct:
Thank you for your reply
Message was edited by: Graphixqueen1

Can not see ABAP code of programs and FM using SE37, SE38, SE80

Similar Messages

Maybe you are looking for