Can not see incoming calls, like I could in PC Sui...

Hi,
I had PCSuite (latest version off the web-update features) installed, I decided to click on the OVI Suite installation ...
I DL and Installed just fine, after useing the OVI suite and getting used to it i find that I am missing the "online" freatures, like incoming SMS and specially incoming calls are not shown any more.
I have E66 connected via USB in PCsuite mode, and compared to the PCSuite I could right away, before the phone even rang, see a pop-up on the screen, telling me that a incoming call is there.
I liked that feature, as you could click SMS, hangup etc .
How do I get the same feature in the "new" OVI suite ??

This is solved in release 2.0.2.42

Similar Messages

I can not see incoming calls after LOLLIPOP update

Hi. When i get a call i cannot see screen, who is calling. It is necessary when phone is locked. Colud you help me?

You may need to perform a software repair using PC Companion.The process will erase all internal memory.You might need to charge your device for about 1-2 hours before so the device has at least 60% battery.
Make sure the device is not connected to computer or laptop and turned off (sometimes you have to press power button and volume up until the device vibrates 3 times or on some devices you have to press the small button near the SIM tray or on the back of the device).
Open PC companion->support zone->phone/tablet software update->repair my phone/tablet blue highlighted.Follow the steps given,do not connect your phone until prompted to press volume down while plugging USB cable. If PC companion does not start the repair process, you might need to run it in compatibility mode with Windows 7 (in some cases XP).
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

I can't see incoming calls since update when I'm on the phone

I can't see incoming calls since the update when I'm on the phone with someone. The calls don't show up in my recent as missed either.

I went through the steps as suggested.
Until someone calls through, I won't know if my swap icon appears, and I can see who my incoming caller is. I'll let you know when that happens.
Geez, I have a 4 not a 5, no wonder my phone did not appear up to date!

HT4623 I phone 5s with 7.0.4 software I can not see the caller ID while on the phone for call waiting.

I phone 5s with 7.0.4 software I can not see the caller ID while on the phone for call waiting. Any help???

The following may help: http://support.apple.com/kb/TS4268

Asterisk not seeing incoming calls

I have Skype Connect set up and an asterisk box set up to use it. I can succesfully call out from asterisk, but I do not see any incoming calls on the number assigned to my Skype Connect Profile. If I call the number it rings a few times then gives a busy signal.
Here is my sip.conf:
[general]
context=from-skype ; Default context for incoming calls
allowoverlap=no ; Disable overlap dialing support. (Default is yes)
udpbindaddr=0.0.0.0 ; IP address to bind UDP listen socket to (0.0.0.0 binds to all)
bindport=5060
bindaddr=0.0.0.0
tcpenable=yes ; Enable server for incoming TCP connections (default is no)
tcpbindaddr=0.0.0.0 ; IP address for TCP server to bind to (0.0.0.0 binds to all interfaces)
srvlookup=yes ; Enable DNS SRV lookups on outbound calls
notifyhold = yes ; Notify subscriptions on HOLD state (default: no)
sendrpid=yes
register => 9905XXXXXXXX:[email protected]/9905XXXXXXXX
[skype]
type=peer
context=from-skype
username=9905XXXXXXXX
secret=Redacted
canreinvite=no
insecure=port,invite
dtmfmode=rfc2833
host=sip.skype.com
realm=sip.skype.com
nat=yes
qualify=yes
fromuser=9905XXXXXXXX
fromdomain=sip.skype.com
disallow=all
allow=g729
allow=ulaw
allow=alaw
trustrpid=no
sendrpid=yes
[1001]
type=friend
callerid=1001
canrevinite=no
dtmfmode=rfc2833
mailbox=1001
disallow=all
allow=ulaw
transport=udp
secret=password
host=dynamic
context=default
And my extensions.conf
[general]
static=yes
writeprotect=no
[globals]
TRUNK=Skype
[default]
[from-skype]
exten=>9905XXXXXXXXXX,Noop(${CALLERID(name)} , ${CALLERID(num)})
exten=>9905XXXXXXXXXX,n,Dial(SIP/1001,30,t,r)
exten=>9905XXXXXXXXXX,n,voicemail(100|u)
exten=>281203XXXX,Noop(${CALLERID(name)} , ${CALLERID(num)})
exten=>281203XXXX,n,Dial(SIP/1001,30,t,r)
exten=>281203XXXX,n,voicemail(100|u)
The last 3 lines were my best guess at how to tell it what the incoming call phone # is and I'm not sure it's entirely necessary. Any thoughts?

Dear MRLindstrom,
I am sorry to hear that you are having issues receiving incoming calls to your Skype Connect Online number.
In looking at your Asterisk configuration, I would suggest changing your 'incoming call field' (the last 3 lines you have included below) to your 9905xxxxxxxxxx, rather than 281203xxxx.
Please make that change and let us know if you are able to receive calls.
Thank you,
MariaA
Skype Enterprise Support

Bought a new phone and now we can not receive incoming calls

This week I bought a new Panasonic cordless handset with no answering machine to replace our AT&T desk phone. I set it all up and waited the 7 hours for it to charge. Checked for dial tone, ringer, and volume. Called the house # from my cell phone and the screen on the Panasonic never showed an incoming call - kicked into voice mail (provided by Verizon) after the preset 5 rings so I left a test message. Panasonic screen showed a "1 new voice mail message". I was able to dial the voice mail access phone # and listen to my test message. Disconnected the new handset and reconnected our old phone - worked just fine. Returned the Panasonic to the store where purchased and exchanged for another (same model). Sales assoc. said there may be a code needed from Verizon. Spent hours on the phone attempting to speak to a real person at the customer service # and decided none work there anymore - everything was automated! After "4 digit pin" frustrations I gave up!
So if you've read this far and can help I'd sure appreciate it! Line works fine, old phone works fine, checked ringer/volume on new phone. Only working phone jack in the house (used to have 2 but when we contracted with V last year they only changed over one - another frustration). And how can I find out when our contract is up?!?

Your mostly talking to peers here. Better off using the
http://www22.verizon.com/support/residential/contact-us/index.htm
option which is on all the Verizon pages. Should always lead you to phone numbers (1-800-verizon) and often an online chat. Sometimes will show you and email option.
As far as peers helping we would need to know what type phone service and general area of the country. Obviously varies as I have had no trouble with panasonic, uniden and other phones at my two locations (NY and FL).

Can't see incoming calls while on a call...

While on the phone, if a call comes in, im unable to see it. However it does beep indicating there is an incoming call. Why is that? Please help!!!!!

go to Settings- General- Reset- Reset Network Settings it will reboot the phone and it should be working from there. I have an iPhone 4s with Verizon and that did the trick.

Can't see incoming caller's name

In my outgoing calls list I can see phone number and person's name (taken from contacts), but in incoming one there is only phone numbers
Is there any option to turn on showing contact name?

do your contacts use phone number only or also name and surname labels? you can had as many info to any number as you like - from nickname to email or even adress, within that contact editing menu...
the other reason of incoming number not appearing may be that the caller wants to be anomymous and blocks his ID cell info and usualy appearing as "unknown" on your screen.
My baby E61i was stolen from me !!!

Can not see some videos, Can not install Activex 9.o47

My name is Alex, I have been working on getting flash to play
for about 3 weeks.
I have uninstalled both shockwave and flash many many times
using all different sites. I have turned off my firewall,
anti spy, and antivirus when downloading. I have shut
everything down that was running. I have closed everything.
I have restarted each time between downloads. I have then
downloaded the install from many many sites. Closed everything, and
installed.
I have uninstalled from ADD/Remove. I have reinstalled. Now,
when I go to ADD/Remove programs it shows that both Flash and
Shockwave are there.
Seriously, I have downloaded and uninstalled and installed so
many times from so many sites.
Each time the screen shows I have done it successfully. But I
cannot get it to play. I have turned off all popup blockers that I
know of.
I still run my anti virus, firewall spyware etc. But says
there is nothing to prevent Flash from playing some of the pages I
use to see.
I have done a Reg clean. And I have installed after all that
and still does not work.
I am the admin on the computer and I am the only one who runs
it. I use firefox for my browser but I tried to get it in IE and
still nothing.
Everything was going absolutely fine till I done the stupid
mistake of updating my Flash player,
seen then my computer is going banana, I don't understand why
is that,
I can actually see U tube videos, but I can not see other
videos like trailers from IMDB, <Your browser is blocking
display of our video player. If you would like to see the video,
please turn off any ad-blocking or Flash-blocking software that you
are using>.
That's what he said on the screen where the video suppose to
play, I can only see advertising, It should be the other way
around,
and even the news on yahoo I can not see them, only ads.
I had no problems before, no pop up I could see the videos
absolutely fine and especially no ADS and then that days,
I wish I could cancel that day, I'm try to fix this problems
all ready 3 weeks and nothing, I did try everything but nothing.
I have download flash Player 9.0.47.0 manage to install but
found impossible to install Activex 9.0.47.0 seems to be impossible
I do know why. disinstall everything reinstall but nothing,
# Select Start.
# Select Run.
# Type cmd
# In the command window, type the following:
uninstall_flash_player.exe /clean
The answer is: uninstall_flash_player.exe is not recognised
as an internal or external command,
operable program or batch file.
does not work, try million of time, does not work.
Does anybody know why?

You are not the first one to notice..................
http://forums.adobe.com/thread/748720?tstart=0
Please do submit a request for it to be changed www.adobe.com/go/wish

I have an Imac and I use mostly "Firefox" and I am "not too" computer savvy and it seems that now I can not see images on Firefox at all. Therfore i can not see what I am clicking on (like "to buy" or "next" .. PLEASE help me! Thanks in advance!

I am "not too computer savvy" so if you are going to answer my question.. Please take super baby steps (thx in advance).. Okay, now I have a 1 yr old Imac I am using 10.6.8 (do not know what that means) but everytime I call Apple support they ask me.. So I figured you may need to know as well. I really love Firefox (easier for me) and I was trying to download a coupon printing thing to print from Coupons.com (plz don't laugh..economy sux) anyways, the operator at coupons.com told me how to install it. Can't remember but if not immediately after or not long after?? It seems that ALL my images on EVERY website are gone. It is very frustrating because I can not see (for example on Ebay where to click "buy it now" or "continue" unless it seems I sometime get lucky and click where it says "image" but there isn't one. It looks like a set of shark teeth actually right beside the word "image" very jaggedy teeth, I guess?? So I have been using Safari. There is no problem with ANY of those website images. I go on the same basic sites so that is how I know that. I have only downloaded music I think 3x. I do not download much at all. I would really love to use Firefox, being the un-savvy computer person I am... Firefox is easier to navigate for me. Thanks SO much!

Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
*Firefox > Preferences > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
See also:
*http://kb.mozillazine.org/Images_or_animations_do_not_load
*https://support.mozilla.org/kb/Images+or+animations+do+not+show

My iphone is gray or black it is functioning but you can not see the screen so I can not call or text or anything

My iphone is gray or black it is functioning but you can not see the screen so I can not call or text or anything, I have a child that is very ill and I have to have access to a phone at all times can someone help me? It happened one other time when I plugged it in to my to listen to music. I know it is working it said something on voice control. I tried the press the circle button and the top button but the screen only turned white?

Try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.
If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order

I have downloaded DNG Profile Editor 1_0_4 and prepared a profile which I can not see in my Camera Raw 6.0 (I have photoshop CS5). Could you please give me an advice?

I have downloaded DNG Profile Editor 1_0_4 and prepared a profile which I can not see in my Camera Raw 6.0 (I have photoshop CS5). Could you please give me an advice?

Uninstall Trusteer software
http://www.trusteer.com/support/uninstalling-rapport-mac-os-x
Remove Sophos
https://discussions.apple.com/message/21069437#21069437

Would like to move iPod touch files to my new Windows 8 computer -- but can not see hidden files

Would like to move iPod touch files to my new Windows 8 computer -- read on how to do this, but this involves being able to see the hidden fiels -- but can not see hidden files...any suggestions. Would like to transfer these files from iPod Touch to new laptop without software -- is that possible -- if not can anyone recommend a good free software to use?

There is no way to do so without software. I recently had a similiar task and was suggested to use iExplorer. It worked like a charm.
Refer to this page for iExplorer
Here is the page I was helped with on this task for reference: Export Songs
Hope this helps!
PSkilton

Hi i would like help with: When I draw circle and add stroke I can not see stroke I use Photoshop CS 5

Hi i would like help with:
When I draw circle and add stroke I can not see stroke
I use Photoshop CS 5

Make sure the stroke is set to a color and not to the symbol that appears here for Fill

Goo night, I have Nikon D810, and i can not see the raw photos on lightroom and Ps, could someone help me?

Good night, I have Nikon D810, and i can not see the raw photos on lightroom and Ps, could someone help me?

Good morning,
Thanks for your message, the versions are LR 5 and PS6
2015-02-24 21:31 GMT+00:00 John Waller <[email protected]>:
Goo night, I have Nikon D810, and i can not see the raw photos on
lightroom and Ps, could someone help me? created by John Waller
<https://forums.adobe.com/people/John+Waller> in Photoshop Lightroom - View
the full discussion <https://forums.adobe.com/message/7226636#7226636>

Can not see incoming calls, like I could in PC Sui...

Similar Messages

Maybe you are looking for