Can not see my Airport in the list of Wifi networks and is blinking organge all the time

Can not see my airport on the list of WiFi networks and is blinking orange all the time. Tried to reset several times.

Do you have a Mac or idevice for setting up the Express? It does require a later utility than is available for windows.
You might be able to setup with the v5 utility in windows but there is no guarantee.
You should use a simple name both for the base and the wireless. eg AEXgen2 base name and AEXwifi for wireless name.. that is if you get access.

Similar Messages

  • Updated my iTunes and now my mac can not see my airport express no matter what I have tried

    recently updated my itunes and the firmware on my airport extreme and suddenly itunes does not recognize my airport express for speakers and my mac through airport utilities can not see my airport express. *** I have tried everything and nothing will bring the airport express back to life what to do

    rosenkd wrote:
    *** I have tried everything
    ... including a "hard reset" or a "factory defaults reset"?

  • I can not see my whole sreen , i have to move up and down and side to side to see all icon, how to adjust back to see whole sreen

    i can not see my whole sreen , i have to move up and down and side to side to see all icon, how to adjust back to see whole sreen

    In addition to holding the Control key and scrolling down.
    You can also zoom the display back out by holding the Command Alt keys and hitting the - key, which is a Universal Access Seeing Preference.

  • How to get the list of roles assigned to a user in all the child systems

    how to get the list of roles assigned to a user in all the child systems from CUA SYSTEM

    Try transaction SUIM in your CUA system. Go to user, cross-system information, users by roles. If you run it wide open, you'll get all users and all roles assigned for all systems managed in your CUA.
    Krysta

  • Assign Task is assigned to a specific user but the she can not see it in her ToDo list

    Hello,
    I am currently working on the first process (after upgraded it to LC ES 2 with SP2) and try to test by routing it to the next person but the user could not see it in her ToDo list nor receive any Task email.
    I checked for the process in the AdminUI and see that it is currently assign to that user and also check the email configuration but do not see any thing wrong. I also recorded it and see it is assign to that person. I then try to re-assign it to a different person but it still does not show in the next person's ToDo list. So I go to the log file and see there is an error as below:
    00000078 UserServiceIm W com.adobe.idp.taskmanager.dsc.userservicev2.UserServiceImpl createTaskFromDialogProperties WARNING!!! You have not specified any Form TLO/DCI settings, and have not specified any input data.  This task will be created without any form.Process: 1515F/1515F, Step Name: AssignTask0
    I tried to search for the error above but could not find any thing reference to it.
    Can any one please advise on how to fix it so the user can see it in their ToDo list when the task is assigned to them.
    Thanks,
    Han Dao

    Hi
    It sounds like you have not selected anything on the Presentation & Data tab of the Workspace Startpoint/User Service.
    You need to specify:
    Your Asset (the form you want to present to the user)
    An associated Action Profile (tells the server how you want the form rendered...typically it is set to Default which uses the Render PDF Form process)
    The variable to hold your data(typically an xml variable)
    Make sure these are set.
    Diana

  • No laughing...  I have a Canon ZR 300 camcorder.  I can not see it when connected via firewire in system profile and iMovie doesn't see it either.  Any suggestions?

    I have an old Canon ZR 300 camcorder that I'm trying to connect to my 17" MBP via 9 pin firewire (its a 4 pin to 9 pin cable as the MBP doesn't have a 4 pin firewire - figured it was backwards compatible).  Anyhow, iMovie 09 doesn't see the camcorder.  I checked under System Profile and then under Firewire and it doesn't see it either.  In fact I get some red letters about not seeing firewire devices.  I'm running Lion.  Any help would be greatly appreciated!!
    Greg

    Should using mixed wifi and ethernet clients on a timecapsule work?  if so is it a feature I can use out of the box so to speak?
    Thanks
    No a TC cannot do what you want.. it is now in dumb stupid wireless join mode.. and it turns off the ethernet ports.. in case you want to use the TC as a wireless bridge to multiple clients which is plainly wrong.. (only airport express is allowed to do this since it has only one ethernet port).
    Welcome to Apple. (The plainly wrong above is a figment of Apple imagination.. of strict network protocols.. but unhelpful for a home device. maybe also to encourage sales of expresses.)

  • How can I see my iphone 5 phone list on my pc and edit?

    HOW CAN I SEE MY PHONE LIST ON MY PC?

    What do you mean by "iPhone List"? You can see what's on the phone if you have iTunes on your computer and connect the the phone to the computer.

  • Can't see new AirPort Express on a wired-only network.

    After checking up http://docs.info.apple.com/article.html?artnum=108064-en I decided to buy an AirPort Express and to hook it to my wired-only home network. I have connected the AEX to one of the Ethernet ports on the router and plugged it in, the light is solid green.
    The AirPort Utility says that it is "unable to find any AirPort base station".
    Using Configure Other... in the File menu, I tried the IP address 192.168.0.12 with the password "public" I get Error -6753.
    The address should be the right one because a) I can ping it b) There are only 2 computers on the network and the have addresses 192.168.0.10 and 192.168.0.11 and c) I have limited the address range to 192.168.0.10 to 192.168.0.109 when setting DHCP in the router.
    Thanks for your help.

    Ubacs, Welcome to the discussion area!
    Have you tried doing hard or factory default reset of the AirPort Express (AX)?

  • AirPort Express not recognized by AirPort Utility, but connected to WiFi network

    Hi all,
    This problem with AirPort Express is driving me nuts. I purchased AX to use it mainly for AirPlay, but I never managed to get it fully working.
    It seems to be working fine for some time after initial boot, but then the AirPlay play option disappears from iTunes, and AirPort Utility (5.6.1) no longer finds any AirPort device.
    I'm using a Planet WNRT-625G router as a base station (connected to my modem box), and I'm joining this WiFi network as a client (I understand extending the network does not work if it's not an AirPort Extreme station?). The WiFi is protected by a WPA2 pre-shared key, and I have tried using different channels. I have assigned a fixed IP to my AX... all to no avail.
    In the status details of my router, I can see that the AX is connected, and I am able to ping my AX... but all Apple software cannot find its own device. Any clue what may be going wrong? How does the AirPort Utility find AirPort devices?
    Thanks to all in advance for your help and ideas! Appreciate it.
    jfk-007

    by design the AX will create a separate network when it starts up for the first time.
    click on the airport icon in your menu bar. you should see something like Apple network XXXXXXXX. in order to set up the express, you will have to temporarily join its network !
    you will get a message asking "do you really want to switch networks ?" and you do want to do that.  now you should see the AX in AU. click on the icon of the AX once to highlight it, then click continue.
    follow onscreen instructions to either have the AX create a new or join an existing network.

  • How can I use an Airport Express to join my wireless network and provide an internet signal to my Power Mac g5 via an ethernet cable?

    I have a power mac g5 that does not have a wireless card, and connects to the internet via ethernet cable.
    I want to know how to set up an airport express so that it joins my wireless home network and provides the G5 with an internet signal.
    This via an ethernet cable that is plugged  into the airport express and then into the ethernet port on the g5.
    Please advise as I have configured the airport express in every way possible, the green light is on and when I plug the ethernet cable into the G5 my network cofigurations shows nothing and says that the ethernet cable is not plugged in (It is).
    I get an internet signal if the ethernet cable is plugged directly into my wireless router, so the ethernet port works.
    Please assist. Thanks.

    Two requirements that must be met to do what you want.......
    1) An AirPort Express 802.11n must be used. Check the Model No on the label on the side of the Express. It needs to be A1264. Any other model number will not do what you want.
    2) The Express must be configured to "Join a wireless network" and the option to enable Ethernet Clients must be checked. 
    Open AirPort Utility and click Manual Setup
    Click the Wireless tab below the row of icons
    The box to "Allow Ethernet Clients" must be checked
    Please check to verify that your AirPort Express meets both requirements

  • After itunes update last week i can not download a new game app,it starts then wipes and says cannot install at this time

    i updated my itunes last week,and now when i buy a new game,it starts to download and then wipes and goes black.and says it can not be installed at this time,please help,,,,,,also whenever i deleate apps to make space on my ipad,the next time i turn it on i have a load of them right back on the ipad,,,so how do i keep them from coming back unless i want them back on? any help will be so very welcome,,thanks sking38494

    ive never had any problems with ap[ple products in the past... this is a first and a stupid problem if you ask me

  • If I add an airport express to extend my wifi network, will I lose some of the bandwidth?

    I currently have an Airport Extreme, which does a great job, however we are losing some signal at the top of the house. If I add an airport express to the middle floor, will it half the current download speed we are getting, but provide a stronger signal, or does it replicate the same speed?

    Adding another base station to extend the wireless network does not directly affect your the download speed provided by your ISP. It will; however, use up some of the overall bandwidth of your wireless network for maintaining that extended network.
    When extending a base station will only repeat the bandwidth at which it receives it. That's why it is important to properly place this base station for best overalll bandwidth performance. Please check out the following AirPort User Tip for details.

  • Converting iPhone 4S to iTouch and would rather not reset it.  How can I disable the phone number from the list of valid iMessage and FaceTime contact points?  The line item is shaded in each.

    I've changed the Apple IDs for iCloud, iMessage and FaceTime.  I've turned cellular off.  I even changed the cellphone number in the phone settings to a 555 garbage number.  I'm guessing the number is some how attached to the SIM card?  Is there any way to solve this short of resetting the phone and starting from scratch?  Backups to iCloud and iTunes were done before any changes took place.

    Bump

  • I can't see who's calling me it appears as unknown and i have already saved the contact

    I have a problem, I just buy an iphone 4, i created a contacts list in my macbook in the contacts app and sync it to the iphone. But when a contact calls me it appears as unknown. What's the problem??? What can I do???

    ANY contact? Or one particular contact?
    If it's one particular contact, they've either blocked or withheld their number from being sent via caller ID or there is a problem with your carrier, their carrier, or the interchange between the two.
    If it's any number, your account is probably not provisioned properly by your carrier. Either way, if a simple re-set as suggested by Eric above doesn't fix it, you're going to need to contact your carrier about the problem.

  • I can not get itunes to download. It keeps saying performing installation check. that is all the further it will go

    itunes will not download

    Michael'sgot this one covered. He has detailed the process at the link below.
    https://discussions.apple.com/thread/3653100?tstart=0

Maybe you are looking for