Can not see new installed server on network

hi,
I have installed 2003 enterprise edition server on a virtual machine using VMWARE. Server is connceted to network and I can access it using Remote administrator but can not access it from explorer. I have checked configurations on the server and wonder what is left to do.
I would appreciate the suggestions.
Many thanks

Is your traffic crossing through any fiewalls or routers, if yes then check for acess list to permit the http port in the box.

Similar Messages

  • Why in SE16 we can not  see New Data Table for standard DSO

    Hi,
    We says that there is three tables (New Data Table, Active Data Table and Change Log Table) of Standard DSO, Then Why in SE16 we can not  see New Data Table of Standard DSO.
    Regards,
    Sushant

    Hi Sushant,
    It is possible to see the 3 DSO tables data in through SE16. May be you do not have authorization to see data through SE16.
    Sankar Kumar

  • Can not see new Power Query data sources?

    Hi, 
    New Power Query can connect to three new data sources: Sybase IQ, Exchange, Dynamics CRM Online
    http://office.microsoft.com/en-us/excel-help/whats-new-in-power-bi-ha104149776.aspx
    I just installed the latest Power Query and wanted to connect to CRM Online instance. For some reason I can not see these new data sources, what am I missing?
    Thanks in advance!

    Hmm... I didn't think we had quite released this version yet. It's possible that that website went live before the link to the new download. There should be a blog entry about this on the "Power BI" blog in the very near future.
    At the risk of providing a spoiler :), the CRM Online support is via OData.

  • Can not see 5GHz band on my network

    My HP 200 Quad all in one PC can not see the 5GHz band on my network. It works fine on the 2.4GHz band and I have another PC on the network that is able to see the 5GHz band. My wireless card is a Ralink and according to its properties it should operate on the 5GHz band on channels36-161. HP Tech support wants to charge me to fix this and the unit is 3 weeks old and was like this right out of the box, not to mention my 2 year warrnty. Can anyone help?
    Freddy

    FWV wrote: hanspuppa, My wireless card is a Ralink Technology device and it does have blue tooth. To the best of my knowledge this card is capable of receiving the 5 GHz signal but it does not. When I check the wireless device properties it list the 5 GHz band to operate through channels 36-161 and also states the device is working
    properly. The last I checked my router it was broadcasting on channel 36, so everything seems to be fine but I can not receive the signal.
    Hello FWV, Sorry for the confusion. I was under the impression that you could not connect at 5 ghz. Now you suggest you cannot connect at all.
    Can you advise if the Ralink can connect to the wireless router at the 2.4 ghz frequency, or not connect at all?
    Can you advise if you can see the router on the network at the 2.4 ghz.?
    Many times, you may need to reboot the router to allow it to recognize new connections.
    Just not sure of what is going on. Maybe some other Member can be of more help.
    Please click the White Kudos star on the left, to say thanks.
    Please mark Accept As Solution if it solves your problem.

  • Wrt160n can not see it as an available network

    I just purchased the WRT160N and followed the setup and was able to connect to the internet with a wired connection. I started my laptop to connect wireless and could not find it as an available network but could see others in the area. I spent 2 hours on the support line with 2 different people and still can not see it or use it wireless. Any ideas?

    You need to adjust the wireless settings/parameters of your router...
    Open an Internet Explorer browser page.In the address bar type - 192.168.1.1
    Leave username blank & in password use admin in lower case...
    For Wireless Settings, please do the following : -
    Click on the Wireless tab-
    -Here select manual configuration...Wireless Network mode should be mixed...
    -Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
    - Set the Radio Band to Standard-20MHz and change the standard channel to 11-2.462GHz...
    - And wireless SSID broadcast should be Enabled and then click on save settings...
    Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
    For Wireless Security : -
    Click on the Sub tab under Wireless > Wireless Security...
    Change the Wireless security mode to WEP, Encryption should be 64 bits.Leave the passphrase blank, don't type in anything...
    Under WEP Key 1 type in any 10 numbers please(numbers only and no letters) and click on save settings...
    Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network.
    Click on Advanced Wireless-
    settings>>Change the Beacon Interval to 75 >>Change the Fragmentation...
    Threshold to 2304 Change the RTS Threshold to 2307 >>Click on "Save Settings"...
    Wait for a minute, Now see if you can locate your Wireless Network and attempt to connect...

  • Why I can not see new contact that I add on my iphone on my pc?

    Hi
    when I add some contact on my iphone ,I can't see that on my icloud when i sign in on my pc.but vise versa is possible.

    Hello pezh69,
    We've an article that can help get your iCloud contacts working correctly.
    iCloud: Troubleshooting iCloud Contacts
    http://support.apple.com/kb/TS3998
    Cheers,
    Allen

  • HT4623 can not see new network

    changed Iphone 4 from O2 to Orange. Done what they said to do. Got O2 to unlock the phone. Which they did. Took out sim card and connected phone to pc using Itunes. establish new phone details. put new micro sim card in but now it reads no service. How do i get it to work?

    After restoring the iPhone, did you see the message "Congratulations your iPhone is unlocked"?

  • I can not see my PC on the network!!!

    How can I get my iMac and PC to talk over the network? I need to transfer all my music, movies and TVshows to my new iMac. Any suggestions?

    OK, if you are tech savy, can should be able to follow iFelix's guide for XP
    here. Look under the section for File Sharing.

  • Can not see SSID on half my network

    I am currently running an Airport Express firmware ver. 7.6.4. My network contains 3-Macbooks, 2-Iphones, 2-Ipods, 1-Ipad, 1 Kodak wireless printer, a smart TV and a Xbox360. My issue is that I have perfect connection on the TV, Xbox and laptops but the other devices cannot even see my SSID much less connect. Any insights into this would be appreciated

    Once "Calendar" is open go to the top left of the screen and click on "Calendar" next to the Apple logo. From the drop down menu click on Preferences. Once the new page appears, on the bottom left of the "General" tab you will see "Show Birthdays Calendar"
    Hope this helps!

  • Can not see new table to reverse

    I have a new table that has been added to an oracle database but when I go to add it to my model it is not available in the list of objects to reverse when I am on the selective reverse tab. I do have the New Datastores checkbox checked. any ideas?

    I figured it out. The physical schema and work schema was defined with the schema name in lower case but should have been in uppercase.

  • Mac's can not see or connect to network resources

    Our company network is a windows network. We have a couple of remote users with Mac's. The Mac's connect to the network over a VPN. They can connect to the network through the VPN but can not see or connect to any network resources. What settings am I missing?

    My problem is that once the VPN is established and I am on the network, none of the shares or resources are visible or able to be connected to.
    VPN gets you connected to the network as if you were physically present in the office, but nothing more.   Once you have successfully connected via VPN, you have to perform a seperate step to actually login to the server. 
    Also, some of the "it just works" aspects, like seeing all the things you can login to, before actually logging in to them, is a feature of Bonjour, which doesn't pass over VPN.  You'll probably have to use the Finder Menu GO -> Connect to Server, and then type the server's IP address in manually.

  • Hi folks, you might know how to fix this: my wifi shows (no hardware installed) then I went to system preferences and deleted the wifi connection, I went also to system information and I can not see wifi listed on Network, how can I create a new wifi ?

    Hi folks, you might know how to fix this: my wifi shows (no hardware installed) then I went to system preferences and deleted the wifi connection, I went also to system information and I can not see wifi listed on Network, how can I create a new wifi or simply solve this, I have tryied shotdown pressing keys like P and R, option, etc. Please help me .

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Can not add new server

    Hi,
    I install Oracle Workshop for WebLogic 10.3 on Windows Vista and I create new remote server without problem but I can not see server state.
    So I delete server and try add new one. Unfortunately when new server popup window is open and I click next (to Specify a WebLogic domain directory/Specify a remote host name) I can not type connection data because all fields but Re-enter password are disabled for remote server type.
    Next I try reinstall Oracle Workshop and this takes no effect.
    Thanks for answer.
    Peter

    In new installation BEA2 I create new domain and start it. After configuring WebLogic Runtime Oracle WebLogic Server connection start to live.
    Same procedure with old installation doesn't work.

  • Network does not see static IP server

    what am I missing here? on the router I have assigned static IP for the win2012 server and the rest of the wkst connect to the router via dhcp. now the wksts can not see the server but can see the rest of the network. I can ping the servers IP address
    but can not ping the server host name. I put the dns addresses of the server on the wksts but still the wksts can see the server.
    thanks for the help---
    wkst info:
     DHCP Enabled. . . . . . . . . . . : Yes
     Autoconfiguration Enabled . . . . : Yes
     Link-local IPv6 Address . . . . . : fe80::616c:59f4:f797:
     IPv4 Address. . . . . . . . . . . : 192.168.1.196(Preferr
     Subnet Mask . . . . . . . . . . . : 255.255.255.0
     Lease Obtained. . . . . . . . . . : Thursday, September 1
     Lease Expires . . . . . . . . . . : Sunday, September 14,
     Default Gateway . . . . . . . . . : 192.168.1.1
     DHCP Server . . . . . . . . . . . : 192.168.1.1
    TM

    Refer :
    http://msdn.microsoft.com/en-us/library/windows/desktop/aa384240(v=vs.85).aspx
    Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
    the thread.
    I decided to add a router with new settting. everything is working now. thanks---
    TM

  • Can not see some videos, Can not install Activex 9.o47

    My name is Alex, I have been working on getting flash to play
    for about 3 weeks.
    I have uninstalled both shockwave and flash many many times
    using all different sites. I have turned off my firewall,
    anti spy, and antivirus when downloading. I have shut
    everything down that was running. I have closed everything.
    I have restarted each time between downloads. I have then
    downloaded the install from many many sites. Closed everything, and
    installed.
    I have uninstalled from ADD/Remove. I have reinstalled. Now,
    when I go to ADD/Remove programs it shows that both Flash and
    Shockwave are there.
    Seriously, I have downloaded and uninstalled and installed so
    many times from so many sites.
    Each time the screen shows I have done it successfully. But I
    cannot get it to play. I have turned off all popup blockers that I
    know of.
    I still run my anti virus, firewall spyware etc. But says
    there is nothing to prevent Flash from playing some of the pages I
    use to see.
    I have done a Reg clean. And I have installed after all that
    and still does not work.
    I am the admin on the computer and I am the only one who runs
    it. I use firefox for my browser but I tried to get it in IE and
    still nothing.
    Everything was going absolutely fine till I done the stupid
    mistake of updating my Flash player,
    seen then my computer is going banana, I don't understand why
    is that,
    I can actually see U tube videos, but I can not see other
    videos like trailers from IMDB, <Your browser is blocking
    display of our video player. If you would like to see the video,
    please turn off any ad-blocking or Flash-blocking software that you
    are using>.
    That's what he said on the screen where the video suppose to
    play, I can only see advertising, It should be the other way
    around,
    and even the news on yahoo I can not see them, only ads.
    I had no problems before, no pop up I could see the videos
    absolutely fine and especially no ADS and then that days,
    I wish I could cancel that day, I'm try to fix this problems
    all ready 3 weeks and nothing, I did try everything but nothing.
    I have download flash Player 9.0.47.0 manage to install but
    found impossible to install Activex 9.0.47.0 seems to be impossible
    I do know why. disinstall everything reinstall but nothing,
    # Select Start.
    # Select Run.
    # Type cmd
    # In the command window, type the following:
    uninstall_flash_player.exe /clean
    The answer is: uninstall_flash_player.exe is not recognised
    as an internal or external command,
    operable program or batch file.
    does not work, try million of time, does not work.
    Does anybody know why?

    You are not the first one to notice..................
    http://forums.adobe.com/thread/748720?tstart=0
    Please do submit a request for it to be changed   www.adobe.com/go/wish

Maybe you are looking for