Can not see TC hard driver using istat pro or activity monitor

I upgraded the firmware of TC to 7.4.1 yesterday, but I found the transfer speed was too slow and I noticed that I can not see the TC condition using istat pro or activity monitor. So I downgraded the firmware to 7.3.2. Now the transfer speed is fine but I still can not see the TC hard driver in the istat pro or activity monitor.(but I can access files in the TC hard driver normally)
Can anyone help?

I couldn't see my TC hard drive in iStat pro until I actually mounted the TC's Airport Disk using the Finder 'Connect to server' dialog. iStat Pro only gives me Used and Free GB for my Airport Disk. My TC is an old 500GB upgraded to 1TB running 7.4.2 firmware.
As to checking the temperature, I'd be interested too. I have a digital thermometer taped to the top surface of the TC and it is reading 46C with an ambient of 17C. The TC sits on top of a cupboard with clear space around, and I am resting it on a spacer which lifts it 12mm clear of the cupboard to give it the best ventilation. The TC has been doing a long (08:00 - 21:00) Time Machine backup today.
Sayling

Similar Messages

I can boot up my macbook pro but all i see is the wallpaper and the dock and the toolbar at the top. I can not see my hard drive or anything else. please help

Please help. I can boot up my macbook pro and log in but after that all i see is the wallpaper, toolbar and the dock. In the dock it has 2 ? where the doc and download folders should be. If I open up a new finder window it doesnt show anything in there no hard drive or anything. If anyone konws how to help let me know please and thank you.

Agree with baltwo, though even if you have saved the install app I wouldn't use it unless its been used to install a known good copy of the OS already.
In your case, that probably means start fresh:
Restart the computer, holding down 'command' and 'r'. When the recovery disk window shows, choose 'Reinstall Mac OS X'.

Imac will not see my hard drive on start up, wants to start from network start up disk that does not exist. How to get rid of it? So there is just one choice / my hard drive.

I have a Intel duo Imac. Everything has been running relatively smoothly for a few years now. All of a sudden my computer will not start. I get the flashing folder with a question mark.
When I go to Start up disk in my system perfernces while the computer is on. I see 2 possible choices. One is my hard drive with the operating system shown. The other is a non-existant Network Start up disk with a question mark in it ( looks like a hard drive with a question mark and it say's its a "network start up disk).
All I think I want to do is get rid of the Network startup with the question mark. I can not find anywhere how one can just remove an old or non existant start up disk without reformatting.
I believe this came from a clients hard drive who had a network system on it. We no longer have that drive. It no longer exists. But a latent icon shows up in start up disk.
When I go to change the start up disk. I can change it to either the hard drive or the network with the question mark. But when I select my hard drive and then got to restart the computer. I get the flashing folder with a question mark on start up. I have also seen the flashing globe a couple times.
When I attempt to run disk utility from may install disk ( holding down "C" on start-up ). Disk utility does not see my hard drive. Just the Apple install disk with the disk utility on it.
What can I do to remedy this short of re-installing? Will a program like Disk Warrior or Tech Tool help?

Thank you. That's what I thought will need to happen.
One more question. I tried using the Apple install disk that came with the computer. It's an OS 10.5.6 disk. It does not see my 10.6.8 system internal hard drive to repair. All it see's is itself 10.5.6 disk. Do you think I can use a 10.8+ disk utillity since that is a higher system it will see the 10.6.8. Where the 10.5.6 does not?
I don't want to turn the computer off for fear I'll get the question mark again. P-Ram got me going last time but for how long I don't know? It would be nice to be able to turn the computer off for the night and startup as usual to give it a rest and try to reset itself.
Thanks for your help, I know I will eventually need to re-install. But I am in the middle of a project with tight deadlines and all I can do right now is back-up. Trying to migrate to another computer temporarily to finish the job. That's a lot of extra work in the short time also.
Just trying to put a band-aid on it for another couple weeks.

T42 will not see 160gbSamsung hard drive in bios - solid green light no apparent activity

I bought a 160 gb Samsung HM160HC for my T42 to upgrade and do a clean install. When I power on the laptop the green hard drive light stays solid. No activity at all and I do not hear any activity from the drive. The bios is 3.23 which is last one for the t42 in 2007. It is also not recognized in the bios setup screen in the startup menu, but the original 40gb shows up fine when I put it back in with the windows XP pro on it and boots up.
I also get a media test failure code: pxe-e61 to check cable on boot agent base code (ba1217bc) screen during boot up and of course "operating system not found" since it can't see a hard drive. Even when I load windows for the install it cannot find a source drive to install to.
Any ideas what is wrong. thinking I got a bad drive I ordered another one and it does the same thing. I have tried them in both of my t42 laptops with the same problem. Hard to believe I got 2 lemons but it does happen. Any known problems trying to use this drive in the T42 that you might be aware of, it was recommended by some other users when I was researching for a drive to buy for the upgrade.
Thanks,
Al

ajkula66 wrote:
It never hurts to go over the basics:
a) Make sure that all the pins are straight and no jumpers present.
b) Secure the drive face down in the caddy with all four screws.
c) Gently but firmly push it in all the way, applying the pressure to the HD cover, and then secure the cover with the screw as well.
Any progress?
Well, do I feel like a dummy. The original HD was secured with only 2 screws so I only put the 2 of them back in since it worked fine for it before, It slid in and seemed to make the connection, no bent pins or anything, no jumpers, etc. just no action either ..LOL, WRONG!!!!! I build computers as a hobby so I went to my assortment of screws and put 2 more to secure it at all corners. HELLO.. works like a charm. I was so frustrated I just couldn't see it or didn't think that 2 scews could be the problem since it work fine like that before. Lesson learned and I know better than to cut corners in computer assembly.
So thanks for pointing out the obvious that I couldn't see. BUT... another issue that you might be able to help with.
I upgraded the HD sine the other one was only 12 gb and I was maxed out and I had been having windows XP Pro freeze up for no apparent reason, sometimes while I was using it other times I would come back and it was just unresponsive and I would have to hard restart it by powering it off. Thjought it was the sleep mode or hibernate mode glitching at first, then thought the hard drive might be getting to full and glitching or had a bad sector or sectors causing the problem.
Well I decided to go with Win 7 since most of the other computers on our home network are win 7 just to be compatible. I don't need the Aero features so that is not an issue for me. Well it is still freezing up, happened while I was updating Win 7 for IE 9. JUST FROZE. no response. Had to power it off to get it to work, just like before. Any Ideas, could it be in the BIOS? It is the last update from IBM 3.23. I also could never get the pointer mouse to work before which would be noce, kept telling me it was turned off in the bios...mouse pad works fine just can't activate the pointer control from the control box but I could never find or figure out in the bios what was wrong. Not sure if the two problems are related or not.
So you thinkd reflashing the bios would help? I went in and checked the connections tothe motherboard when I upgraded the ram, just o be sure they were not loose or not counnected securely. Everything seemed to be fine but no pointer activity either and still frezzing up.
Direction to go and what to start looking for. start with the basics again i guess. I have 2 t42's and the other one works fine no glitches and the pointer works on it with no problem.

Can not get external hard drives to connect to my computer 17" Mac book Pro 10.7.5

can not get external hard drives to connect to my computer I am using a 17" Mac book Pro 10.7.5.
I have 2 iomegas and 1 LaCie. Changed cables. I can feel the external hard drives running and
I can hear them running but I can not get them on the computer any more. They did work at one time.
Can any one PLEASE help?

Nothing appear on my desktop.
I did Repair and Verify the HDDs in Disk Utility>First Aid from the
Utilites App about a dozen times ans they all said everything was good
except for the last time there were erors found and I ran the
Disk Utility from the Start Up Disk and the repairs were made and everything
was subposed to te good and still Nothing on the desk top.
Ginger

Can not fine external hard drive for time machine sence lion was installed

I can not fine external hard drive for time machine sence lion was installed, it don't reconise it at all.

I have a Mac Mini (late 2009) and I have an iomega 1TB external hard drive connected to my mini via firewire and usb (usb allows me to use the usb ports on the external 1TB drive to daisy chain other devices). Since I installed Lion, my Time Machine and this 1TB drive (and its partitions) is finicky. Sometimes it is mounted and sometimes it is not. This issue has only surfaced post Snow Leopard and in the Lion era. I am not the first to say this but the whole reason I went Mac was b/c of Vista. I am beginning to think that Lion is the new Vista. Sorry for the latter, just venting... b/c this ain't the first issue with Lion.

Time machine not seeing external hard drive in time line

can anyone help
time machine not seeing external hard drive in time line
before 2013
information say in 2009 is not accessable to view this
i must select external drive from finder
the time machine icon not recognising

thanks for reply
when i open time machine the time line on right side of page
has date ranging from 2014 back to 2010 but only highlight date from 2014 back to 2013
anything before 2013 is greyed out and cannot not be selected
when i touch the pages they only rush towards me a limited amount then stops
also why it shows date as 2014 is strange

I can not access the hard drive connected to my airport extreme! Any thoughts?

I can not access the hard drive connected to my ariport extreme. When I use the finder to connect a server and type in the IP of the a. extreme, 10.0.1.1 it does not work and I get an error message.
Any thoughts.
A

Is the hard drive formatted for Mac in Mac OS Extended (Journaled)?
If yes, you may need to use a powered USB hub since the USB port on the AirPort Extreme is under powered and it is often necessary to use a powered hub....even if the hard drive has its own power supply
If both items check out above.....have you checked Finder Preferences to make sure that "Connected Servers" will be displayed?
Finder Preferences > General > Show These Items on the Desktop > Connected Servers
Then with the Finder menus displayed at the top of the screen click the Go menu
Click Network and the AirPort Extreme icon should be displayed
Double click the icon to mount the drive on the desktop

IBook G4 not seeing the Hard Drive

My iBook G4 does not see the hard drive. When the computer turns on I get the flashing smiley face in the folder. When I put the disk for the computer in then the computer starts up but cannot see the hard drive so I cannot get into anything. I even put the computer in safe mode to see if I could get it to work and I couldn't. I had a friend who works on computers look at it and he said I needed a new hard drive. So I changed out the hard drive and the computer worked fine for 3 days and then it did the same thing. I'm not sure if there's a problem with the logic board or really what is wrong with it. Please help

Cantobellus:
So I changed out the hard drive and the computer worked fine for 3 days and then it did the same thing.
This seems to suggest that your HDD may not be the problem. Try the old HDD you removed by putting it in a firewire enclosure and connect it to the computer and see if you can boot the computer from it. I experienced a similar issue with a iBook G4 which is detailed in the thread Could it be the logic board?. Your issue may be different, but the thread may give you some ideas for troubleshooting.
Cheers
cornelius

DNG Converter Not seeing my Hard Drive(s)

DNG CONVERTER not seeing my hard drive....none of them.
Any help will be greatly appreciated....THANX.

Platform: Macintosh or PC? Exact versions of the OS and the DNG Converter? Details about your setup? How is the drive formatted?
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Y ? i can not see my DVD drive in favorites, on the left side. TQ.

y ? i can not see my DVD drive in favorites, on the left side.
TQ.

On the left side of what, the Finder?
Open Finder Preferences, click on Sidebar and see if CDs & DVDs is selected under devices.

HT4790 I can not find my hard drive after encryption

I have a macbook pro I upgraded to Mountian lion from 10.6.8.
Went through the encryption process. Now my user can not find his hard drive after a re boot
Steve

Uninstall the program. It should have come with an uninstaller. If not, contact the developer for instructions.

HT2426 Can't see my hard drive on my AirPort Extreme

I'm trying to set up a external HD as a share drive for the first time by connecting it to my Airport Extreme. I can't see my hard disk where it is supppose to show up in Finder under Shared. There's nothing. No Shared, no external HD. Anybody know why? The HD is good, it works when I connect it directly to my imac. Thanks

I'm currently having the same problem.
For a very long time, I've been using my Extreme with a 2TB external WD drive with seperate power supply.
Today I installed two old 2.5" drives ind a RAID1 enclosure, which I want to use for even more redundant back ups (NOT for speed).
But somehow my Extreme fail to see the attached drive.
I've tried ways of powering up and connecting in different stages, but nothing works.
When I unplug the enclosure from the Extreme and connect it directly to my Macbook, there seems to be nothing wrong. Drive shows up and everything seems to be working.
Anybody got a clue?

My time capsule does not see external hard drive

I just got a new time capsule and am hoping to use it as a wireless bridge and NAS.
I've got it set up as a bridge and that seems to be working correctly, but when I plug my external hard drive into the time capsule, I can't see that external drive show up anywhere.
Has anybody else run into this issue?
The hard drive is a WD Elements 3 TB USB 2.0 Desktop External Hard Drive - WDBAAU0030HBK-NESN.

I can't see that external drive show up anywhere.
If the drive is formatted correctly and communicating with the Time Capsule, then it will be displayed when you open AirPort Utility, click on the Time Capsule icon, click Edit, and then click the Disks tab at the top of the next window. Example:
Remember that since this drive is a "network" drive, it will not be displayed on the desktop until you manually mount the drive.

AirPort Extreme does not see printer, hard drive, AirPort Express!

I just got an AirPort Extreme (802.11n), to replace my AirPort Express. I have a Brother 665CW wireless all-in-one printer, which had worked perfectly but now I cannot find it. I have also hooked my USB hard drive into the Extreme. I can see the hard drive in the AirPort Utility, but I don't know how to find it from my iBook. I'd also like to put the Express in another room to use the AirTunes feature. Unfortunately, almost nothing is working!
Here is how it's set up:
Den:
AirPort Extreme - hardwired to:
- DSL modem
- hard drive (via USB)
Brother 665CW (wireless)
Living Room:
AirPort Express
Advice would be appreciated. I'm usually able to troubleshoot my problems, but documentation on this Extreme is really bad! Thanks!
iBook G4 Mac OS X (10.4.9)

I had problems adding Airport expresses using Airport Utility. However I found it worked fine if I used the manual set-up option and not the Assist me option.
Reset the airport express then, in manual set-up, set the express to 'join an airport network' add the airport network password and see if that works

Can not see TC hard driver using istat pro or activity monitor

Similar Messages

Maybe you are looking for