Can not see the administration tab in EM

Hi, I installed Oracle 10g EE Release 2. However, when I log in to EM and I want to see the Administration tab, I have to enter again the user and password I gave them and I got this error: Database error I/O Exception: Unknown host specified
I check on metalink and said that is due to the TZ zone so I modified the file emd-properties and run emctl resetTZ agent without success
Someone knows about a patch that solve this.
Thank you

Hi,
See if this thread below help you:
Can't connect to Oracle server, windoze 2003 server.
Cheers

Similar Messages

Can not see the report in report manager/admin tab

Hi,
in 8.49 on Win 2003 some users can not see the reports in report manager/admin tab. PS user can see them.
Should we add some grants in user profile ? Which ? Any query to compare that user profile with PS ?
Thank you.

On the administration page, you will be able to see "View Reports For" header on the top.
Under that header you will see the following fields:
User ID/Type/Last/Status/Folder /Instance
Above values will be used by PeopleSoft to filter and display the list of reports
If the user has selected Status as Processing and saved the page, PeopleSoft will only show reports which are in Processing status.
If user runs a report and it has been posted, it will not show up in report manager coz the filter value is set to Processing.
Hope this helps. I dont think Permissions has anything to do with this since user is able to view the page.

I can not see the PC I'm connected to over VPN in the MY Network tab.

Hi,
I have set up my incoming connection for my VPN
on a Windows 8.1 PC. I can then remotely log in with my Windows 7 laptop. The laptop establishes a connection and says that I have "ipv4 internet access."
The problem I'm having is that I can’t find the PC in my network. What am I missing? Is Windows 7 not compatible with Windows 8.1 over
a VPN? I have turned off my Norton's Firewall for a short period of time but this did not change anything. I have altered the IP range allocation for the incoming connection and this has helped to establish a stable connection.
Any ideas on why I can not see the PC I'm connected to, in the (MY
Network) tab, would be much appreciated. Thanks

Hi Steve,
The main issue is the Windows 8.1 machine is not listed in the Windows 7 machine via VPN ,right ?
Please check the following settings in the network and sharing center:
1.Check these settings in the Advanced sharing settings
“Turn on network discovery” and “turn on file and print sharing”
2.Ping the destination machine both with the IP address and the UNC to have a check .
Best regards

WHY DO I HAVE TO CLICK ON " GROUP YOUR TABS" IN ORDER TO SEE HOW MANEY TABS ARE THERE? WHY CAN NOT SEE THE TABS?

help...........
it happen, because i wanted to customize my fire fox and drag the tabs over navigation tool bar.. now i can not see the tabs unless i click on group your tabs button :( and can not change it any more

By PM
''hi John, i can not see, how many sites are open, because i do not see the tabs! i am sorry but i do not know how to explain it:( I see a window with my bookmarks -toolbar, menu bar and navigation bar, but no tabs for the sites, i am on! thank you for taking time and answering! ''
What happens when you open a new tab for instance use Keyboard shortcut Ctrl +T does that open a new tab that you can see. Please attach a screenshot of your ordinary Firefox page e.g. open on this forum. And a screenshot of the Group Your tabs view.
* [[How do I create a screenshot of my problem?]]
* [[How to make screenshots]]
I could suggest trying the Firefox reset, but that may be rather premature
* [[Reset Firefox – easily fix most problems]]

In Firefox can not see the Downloads window, in the jump in the boot to be seen - the download speed Downloaded much and now can not see how to fix it?

in Firefox can not see the Downloads window, in the jump in the boot to be seen - the download speed
Downloaded much and now can not see how to fix it?

I hate the new downloads-in-a-tab scheme. This was an unnecessary change in my book (if it aint broke, don't "fix it").
So in order to get it back, I performed the about:config browser.download.useToolkitUI change, but now all I get is a blank download window that pops up every time I download something.
Is there something else that I need to do? I've checked the change and it was saved, but it didn't resolve my issue as much as it just caused me a new issue.

Why i can not see the columns of "Tax Category" in transaction code FS00

Dear Experts,
Why i can not see the columns of "Tax Category" and "Posting without tax allowed" in tab of "Control Data" transaction code FS00?
How can i add the columns of "Tax Category" and "Posting without tax allowed"?
Looking forward to your reply.
Best Regards,
Merry

Hi,
Go to transaction OBD4, and check whether the field "Tax category" is suppressed in group "Account control" for your GL account group.
If not, then go to OB26 and check the field status for the same field for create, change activity.
Regards,
Gaurav

Why i can not see the Document goods movements from T-CODE CO03 ?

Hello,
why i can not see the Document goods movements list use T-CODE CO03 ? I'm sure i have issueed for this production order. thanks.
xinzhou.

Hi,
Is this a problem with only one order? or with all the Orders of the same "Order Type".
If this is with only one Order, check goods movements actually done or not?
If this problem is with other Orders as well (same Order Type), then with the T.Code; OPL8.
In the 2nd Tab Page (Implemenation) - Whether the Check boxes are filled for Documented Goods Movements??
Regards,
Siva

Cisco Unified Operation Manager: can not see the Campus manager

Dear all,
I have installed the CUOM to manage my IPT system. I have successfully installed without any errors. The system now can detect all IPT system components but I have a problem. From the Tool on Service Level View, I only the option for Alert History and can not see the option for Campus manager to customize the topology (like the tool on Ciscoworks LMS).
Please give me some advices.
Thank you,
Thanh

On the administration page, you will be able to see "View Reports For" header on the top.
Under that header you will see the following fields:
User ID/Type/Last/Status/Folder /Instance
Above values will be used by PeopleSoft to filter and display the list of reports
If the user has selected Status as Processing and saved the page, PeopleSoft will only show reports which are in Processing status.
If user runs a report and it has been posted, it will not show up in report manager coz the filter value is set to Processing.
Hope this helps. I dont think Permissions has anything to do with this since user is able to view the page.

TS5181 I can't see the radio tab on my iphone nor ipad

I can not see the radio icon on my iPhone and iPad operating system 7.0.2

I'm in the US, in CA, and I had the itunes radio tab in my music app, but the tab disappeared and now I can't get it back. I've tried turning my phone off and on, signing out and back in to my itunes account, etc. but it still is not there. How do I get it back?

Can not see the data in the grid

Hi,
nice to see the new features, but I can not see the the table inserts
in the data grid - the <data> rider is not clickable.
Regards

Hi annerose,
This problem has appeared in a few other threads. It's caused by installing Release 2 Raptor over Release 1 Raptor without first deinstalling Release 1 Raptor . So what you need to do is:
1) Back up any important Raptor files, e.g. connections etc.
2) Remove the existing Raptor Rel 1 installation folder
3) Install Raptor Rel 2
Hope this helps
ady

I bought an I pad 2 from us but I can not activate the Facetime in UAE(Dubai)as I can not see the country in the I pad's drop list, anyone has an idea as how to resolve this issue

I bought an I pad 2 from us but I can not activate the Facetime in UAE(Dubai)as I can not see the country in the I pad's drop list, anyone has an idea as to how to resolve this issue

I'm not that familiar with how FaceTime works. I know how to set It up but I don't use it. I just know that you can't activate in the UAE. I believe that you can activate in any country that permits it's use. Whether you will need a new ID or not, I can't confirm.
You can Google this and get all sorts of articles on workarounds. Apparently if you set up a VPN you can use it in the UAE. Here is one article that I found.
http://talkfree7.blogspot.com/2010/09/how-to-facetime-voip-call-from-uae.html
I Googled "workaround for FaceTime in UAE" to find this.

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

Cannot see what files ? Music (synced music should appear in the iPod app), films/TV shows (Videos app), documents ... ?

HT3625 i can not see the line in/built in input on the menu?do you know why?

i can not see the line in/built in input on the menu?does anyone know why?
i am trying to broadcast a live dj mixing but with the set up, i cant find the lin in input not even on the menue.
any clues will be appreciated.

see shots from '11 to '12 going forward.

Final user's can not see the data due to limited authorization.

We have created a InfoSet with three info Objects, 0Account, 0Costcenter and 0COMP_CODE. 0Costcenter have an attribute retail location 0RT_LOCATIO.
0RT_LOCATIO is an authorization relevant object. We as consultants can execute the infoset properly, but final user's with limited authorizations can not see the data because of authorization failier
We hae several options to solve the issue, deleselect the auth. flag in the infoobject; delete the infoobject from the attributes of the cost center or create an authorization object and assign it to the final user's profile. But we don't want to go that way.
My question is, is there any way to avoid including this attribute in the infoset definition? We are not using it in the query and we don't need it, so if we could delete it from the infoset (in the same way you add or delete infoobjects from an Infocube) without changing the cost center aster data, we will have our problem solved.
Does anyone how to do this (if possible)?
Thanks in advance!

Just do two things to find the authorization check failed for that user.
1. Execute SU53 output and find out the authoirzation check failed. If yes, please send that to BASIS Team.
2. Next one, switch on the authorization trace in ST01 and ask that user to see that data. if the user is failed with authorization issue. switch off the trace in ST01 and find out the issue.
Do this way, if it is not successful you can go for any other alternate way.
Hope this would help you.

Can not see the menu of New Business Components Package in jdeveloper

I am just follow the developer guide.
and when I create the Business Components Package, the guide said that
========================================
In the JDeveloper Navigator, select the OA Project where you want to create your package.
From the main menu, choose File > New to open the New Object Gallery.
In the Categories tree, expand the Business Tier node, and select Business Components (BC4J).
In the Items list, select Business Components Package to open the Business Components Package Wizard. You can also right-click on the OA Project and select New Business Components Package to navigate directly to the Business Components Package Wizard.
=====================================
In fact I can not see the menu about Business Components (BC4J) in the File/new/buisness tier/Business Components (BC4J).
I can only see the File/new/buisness tier/ADF Business Components.
And can not find the "Business Components Package" under ADF Business Components either.
I am using the JDev Extension for OA (p5856648_R12_GENERIC.zip) and EBS 12.0.0.
And I create an OA Workspace and OA Project.
can anyone help?

James,
Use search facility on forum. Chk thread Re: OAF Toolbox Tutorial Help - Search
--Shiv

Can not see the administration tab in EM

Similar Messages

Maybe you are looking for