Can not see the ICON of Complete Order (Business Completion) in the IW32.

Hi All,
          I want to Complete the Maintenance Order (Business Completion) but I can not see Icon - Complete Order. to complete the Maintenance Order. I understand Order --- Function -
Completion path can be used for competeion but it is disabled.
          For Superuser's LOGIN they have the ICON for complete Orders and they can see any error message for completiing Orders. Since I cant perform complete Order I can not see any error message.
         Is there any user settings for ICON's display.
Regards,
Narendra

It is assigned in role
To display - run PFCG and select the role click display and select authorisation tab click details icon and click organisation level to view the Buisness transaction
To maintain - Run PFCG and select role : SAP_Workorder_Closer ,Click the pencil and click on the authorisation tab and change authorisation value and eithier you can manually maintain I_BETRVORG with BABS value. or Choose Plant maintenance business transaction from the structure and add BABS and generate the profile. then execute the transaction.
Co-ordinate with Basis or Security team
Thanks
S.N

Similar Messages

HT4437 I can not see the AirPlay icon on my iphone. Can anyone help?

I am connected to the same WiFi network at my house through my Apple TV as well as my iPhone 5 but I can not see the AirPlay icon on my iPhone ! Can anyone help to guide me to connect my iPhone to the Apple TV so i can stream media on to my TV?

Yes, under the Settings menu of my AppleTV, I have gone into AirPlay sub-menu and the AirPlay selection shows "ON", Onscreen Code is set to "OFF" and no Password is set up.
I also have a Tick against the AppleTV listed under Speakers.
Is there anything else I should do to enable AirPlay on the AppleTV or my iPhone?

HT1386 why i can not see the sync icon on the left corner side?

Dear all
i am trying to sync my iphone but i can not see the sync icon on the left corner side ?
although i could see that before.
thanks
m.tamiz

No app I'm afraid.
These problems can be multifactorial but often are network related.
You have enabled Home Sharing on all devices?

WHY DO I HAVE TO CLICK ON " GROUP YOUR TABS" IN ORDER TO SEE HOW MANEY TABS ARE THERE? WHY CAN NOT SEE THE TABS?

help...........
it happen, because i wanted to customize my fire fox and drag the tabs over navigation tool bar.. now i can not see the tabs unless i click on group your tabs button :( and can not change it any more

By PM
''hi John, i can not see, how many sites are open, because i do not see the tabs! i am sorry but i do not know how to explain it:( I see a window with my bookmarks -toolbar, menu bar and navigation bar, but no tabs for the sites, i am on! thank you for taking time and answering! ''
What happens when you open a new tab for instance use Keyboard shortcut Ctrl +T does that open a new tab that you can see. Please attach a screenshot of your ordinary Firefox page e.g. open on this forum. And a screenshot of the Group Your tabs view.
* [[How do I create a screenshot of my problem?]]
* [[How to make screenshots]]
I could suggest trying the Firefox reset, but that may be rather premature
* [[Reset Firefox – easily fix most problems]]

Can not see the new appending fields in RSA6

Hi,
I add one appending structure to existing datasource, after that I can not see the new field in RSA6, RSO2. However I can see it from RSA2 and SE11 (for extract structure).
Any idea?
Thanks
Victor

Victor,
can you tell me how u have done this. you have a DS in RSA6 created from RSO2. then you created a append structure right? then click on your DS on the RSA6 screen. click on change icon on the application tool bar or function key CTRL + SHIFT +F1, maintain the datasource.
can you able to see the fields here or not (i'm asking for change mode)?
Nagesh.

In Firefox can not see the Downloads window, in the jump in the boot to be seen - the download speed Downloaded much and now can not see how to fix it?

in Firefox can not see the Downloads window, in the jump in the boot to be seen - the download speed
Downloaded much and now can not see how to fix it?

I hate the new downloads-in-a-tab scheme. This was an unnecessary change in my book (if it aint broke, don't "fix it").
So in order to get it back, I performed the about:config browser.download.useToolkitUI change, but now all I get is a blank download window that pops up every time I download something.
Is there something else that I need to do? I've checked the change and it was saved, but it didn't resolve my issue as much as it just caused me a new issue.

Question: 10gR2 database can not see the 11gR2 ASM diskgroup?

Hi there,
env:
uname -rm
2.6.18-92.1.22.el5xen x86_64
Single server(non-RAC)
note: we don't want to upgrade 10gr2 database into 11gR2 yet. But we created the 11gR2 ASM, then a 11gr2 database on ASM, and plan to migrate datafile in 10gR2 database to 11gR2 ASM
1. oracle 10gR2 installed first version: 10.2.0.3.0
2. then install 11gR2 Grid Infrastructure, and created ASM (version 11gr2)
$ sqlplus / as sysasm
SQL*Plus: Release 11.2.0.1.0 Production on Tue Oct 19 10:30:56 2010
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Automatic Storage Management option
SQL> col name form a15
SQL> col COMPATIBILITY form a15
SQL> col DATABASE_COMPATIBILITY form a15
SQL> l
1* select name , STATE, COMPATIBILITY, DATABASE_COMPATIBILITY from v$asm_diskgroup
SQL> /
NAME STATE COMPATIBILITY DATABASE_COMPAT
ORCL_DATA1 MOUNTED 11.2.0.0.0 10.1.0.0.0
ORA_DATA MOUNTED 10.1.0.0.0 10.1.0.0.0
3. in 10gR2 database
sqlplus /
SQL*Plus: Release 10.2.0.3.0 - Production on Tue Oct 19 12:12:31 2010
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning and Data Mining options
SQL> select * from v$asm_diskgroup;
no rows selected
4. pin the node into css
# /u01/app/product/11.2.0/grid/bin/crsctl pin css -n mynodename
CRS-4000: Command Pin failed, or completed with errors.
Question: 10gR2 database can not see the 11gR2 ASM diskgroup?
please help
Thanks
Scott

What is the output of
olsnodes -t -n
Also, see unix error log and ohasd error log if you find anything in that

Why i can not see the Document goods movements from T-CODE CO03 ?

Hello,
why i can not see the Document goods movements list use T-CODE CO03 ? I'm sure i have issueed for this production order. thanks.
xinzhou.

Hi,
Is this a problem with only one order? or with all the Orders of the same "Order Type".
If this is with only one Order, check goods movements actually done or not?
If this problem is with other Orders as well (same Order Type), then with the T.Code; OPL8.
In the 2nd Tab Page (Implemenation) - Whether the Check boxes are filled for Documented Goods Movements??
Regards,
Siva

TS1368 i try to charge my ipod 4th generation but can not see the battary been charge and also cannot connect to itunes on my computer

i try to charge my ipod 4th generation but can not see the battary been charge and also cannot connect to itunes on my computer

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Can not see the data in the grid

Hi,
nice to see the new features, but I can not see the the table inserts
in the data grid - the <data> rider is not clickable.
Regards

Hi annerose,
This problem has appeared in a few other threads. It's caused by installing Release 2 Raptor over Release 1 Raptor without first deinstalling Release 1 Raptor . So what you need to do is:
1) Back up any important Raptor files, e.g. connections etc.
2) Remove the existing Raptor Rel 1 installation folder
3) Install Raptor Rel 2
Hope this helps
ady

I bought an I pad 2 from us but I can not activate the Facetime in UAE(Dubai)as I can not see the country in the I pad's drop list, anyone has an idea as how to resolve this issue

I bought an I pad 2 from us but I can not activate the Facetime in UAE(Dubai)as I can not see the country in the I pad's drop list, anyone has an idea as to how to resolve this issue

I'm not that familiar with how FaceTime works. I know how to set It up but I don't use it. I just know that you can't activate in the UAE. I believe that you can activate in any country that permits it's use. Whether you will need a new ID or not, I can't confirm.
You can Google this and get all sorts of articles on workarounds. Apparently if you set up a VPN you can use it in the UAE. Here is one article that I found.
http://talkfree7.blogspot.com/2010/09/how-to-facetime-voip-call-from-uae.html
I Googled "workaround for FaceTime in UAE" to find this.

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

Cannot see what files ? Music (synced music should appear in the iPod app), films/TV shows (Videos app), documents ... ?

HT3625 i can not see the line in/built in input on the menu?do you know why?

i can not see the line in/built in input on the menu?does anyone know why?
i am trying to broadcast a live dj mixing but with the set up, i cant find the lin in input not even on the menue.
any clues will be appreciated.

see shots from '11 to '12 going forward.

Can not see the report in report manager/admin tab

Hi,
in 8.49 on Win 2003 some users can not see the reports in report manager/admin tab. PS user can see them.
Should we add some grants in user profile ? Which ? Any query to compare that user profile with PS ?
Thank you.

On the administration page, you will be able to see "View Reports For" header on the top.
Under that header you will see the following fields:
User ID/Type/Last/Status/Folder /Instance
Above values will be used by PeopleSoft to filter and display the list of reports
If the user has selected Status as Processing and saved the page, PeopleSoft will only show reports which are in Processing status.
If user runs a report and it has been posted, it will not show up in report manager coz the filter value is set to Processing.
Hope this helps. I dont think Permissions has anything to do with this since user is able to view the page.

Final user's can not see the data due to limited authorization.

We have created a InfoSet with three info Objects, 0Account, 0Costcenter and 0COMP_CODE. 0Costcenter have an attribute retail location 0RT_LOCATIO.
0RT_LOCATIO is an authorization relevant object. We as consultants can execute the infoset properly, but final user's with limited authorizations can not see the data because of authorization failier
We hae several options to solve the issue, deleselect the auth. flag in the infoobject; delete the infoobject from the attributes of the cost center or create an authorization object and assign it to the final user's profile. But we don't want to go that way.
My question is, is there any way to avoid including this attribute in the infoset definition? We are not using it in the query and we don't need it, so if we could delete it from the infoset (in the same way you add or delete infoobjects from an Infocube) without changing the cost center aster data, we will have our problem solved.
Does anyone how to do this (if possible)?
Thanks in advance!

Just do two things to find the authorization check failed for that user.
1. Execute SU53 output and find out the authoirzation check failed. If yes, please send that to BASIS Team.
2. Next one, switch on the authorization trace in ST01 and ask that user to see that data. if the user is failed with authorization issue. switch off the trace in ST01 and find out the issue.
Do this way, if it is not successful you can go for any other alternate way.
Hope this would help you.

Can not see the menu of New Business Components Package in jdeveloper

I am just follow the developer guide.
and when I create the Business Components Package, the guide said that
========================================
In the JDeveloper Navigator, select the OA Project where you want to create your package.
From the main menu, choose File > New to open the New Object Gallery.
In the Categories tree, expand the Business Tier node, and select Business Components (BC4J).
In the Items list, select Business Components Package to open the Business Components Package Wizard. You can also right-click on the OA Project and select New Business Components Package to navigate directly to the Business Components Package Wizard.
=====================================
In fact I can not see the menu about Business Components (BC4J) in the File/new/buisness tier/Business Components (BC4J).
I can only see the File/new/buisness tier/ADF Business Components.
And can not find the "Business Components Package" under ADF Business Components either.
I am using the JDev Extension for OA (p5856648_R12_GENERIC.zip) and EBS 12.0.0.
And I create an OA Workspace and OA Project.
can anyone help?

James,
Use search facility on forum. Chk thread Re: OAF Toolbox Tutorial Help - Search
--Shiv

Can not see the ICON of Complete Order (Business Completion) in the IW32.

Similar Messages

Maybe you are looking for