Can not see two fields in Crystal 2008 Developer explorer/designer view

I am currently developing crystal 2008 reports against the salesforce.com database using version 12.0.0.683 CR Developer Full version. I am using an updated driver that was provided in July or Aug 08 in order to view self referencing fields. The problem is that when I try and report against one of the tables (lead history) I cannot view two of the fields (New Value and Old Value)? I can see these two field (New Value and Old Value) in the database expert as the last two fields in the actual table, but the two fields are missing when I go into the explorer/designer view. In Salesforce, these two fields can not be filtered on, but I can export all the values in this table using Salesforece Apex data loader.

Please re-post if this is still an issue to the OnDemand Forum or purchase a case and have a dedicated support engineer work with you directly

Similar Messages

I can not see my waves and i cant refresh the over view

why can i not see my waves it happend out of no where and right now im stuck it came back for a seconed when i refreshed my over views but it wont let me afgain

One possibility:
In Logic's Preferences/Audio/Devices..
Make sure "Recording Delay" is set to zero.
If it's not set to zero why was it changed?

Can not see Characteristics fields in the output option of VC

Hello,
Any body know why is the characteristic fields of a BW query shows only in the input parameter and not shown in the output option when we model BW query in VC?
Regards,
Maureen

Hi Maureen,
right click on query "Test data service" then excute the query and click on generate.
Best Regards,
Marcel

Adding new field to data source -can not see them

Experts,
I have added 4 fields to the data source 0FI_AA_11 .
I can able to see these fields in the append structure or in RSA2,but i can not able to see in RSA6.I reactivated append structure ,still i can not see these fields in RSA6.
Please advice me how can i see them in RSA6.

Hi Manoj,
Have a look, similar post:
Re: not able to see new fields in datasource
Hope it Helps
Srini

Can not see the new appending fields in RSA6

Hi,
I add one appending structure to existing datasource, after that I can not see the new field in RSA6, RSO2. However I can see it from RSA2 and SE11 (for extract structure).
Any idea?
Thanks
Victor

Victor,
can you tell me how u have done this. you have a DS in RSA6 created from RSO2. then you created a append structure right? then click on your DS on the RSA6 screen. click on change icon on the application tool bar or function key CTRL + SHIFT +F1, maintain the datasource.
can you able to see the fields here or not (i'm asking for change mode)?
Nagesh.

Can not see the report in report manager/admin tab

Hi,
in 8.49 on Win 2003 some users can not see the reports in report manager/admin tab. PS user can see them.
Should we add some grants in user profile ? Which ? Any query to compare that user profile with PS ?
Thank you.

On the administration page, you will be able to see "View Reports For" header on the top.
Under that header you will see the following fields:
User ID/Type/Last/Status/Folder /Instance
Above values will be used by PeopleSoft to filter and display the list of reports
If the user has selected Status as Processing and saved the page, PeopleSoft will only show reports which are in Processing status.
If user runs a report and it has been posted, it will not show up in report manager coz the filter value is set to Processing.
Hope this helps. I dont think Permissions has anything to do with this since user is able to view the page.

Final user's can not see the data due to limited authorization.

We have created a InfoSet with three info Objects, 0Account, 0Costcenter and 0COMP_CODE. 0Costcenter have an attribute retail location 0RT_LOCATIO.
0RT_LOCATIO is an authorization relevant object. We as consultants can execute the infoset properly, but final user's with limited authorizations can not see the data because of authorization failier
We hae several options to solve the issue, deleselect the auth. flag in the infoobject; delete the infoobject from the attributes of the cost center or create an authorization object and assign it to the final user's profile. But we don't want to go that way.
My question is, is there any way to avoid including this attribute in the infoset definition? We are not using it in the query and we don't need it, so if we could delete it from the infoset (in the same way you add or delete infoobjects from an Infocube) without changing the cost center aster data, we will have our problem solved.
Does anyone how to do this (if possible)?
Thanks in advance!

Just do two things to find the authorization check failed for that user.
1. Execute SU53 output and find out the authoirzation check failed. If yes, please send that to BASIS Team.
2. Next one, switch on the authorization trace in ST01 and ask that user to see that data. if the user is failed with authorization issue. switch off the trace in ST01 and find out the issue.
Do this way, if it is not successful you can go for any other alternate way.
Hope this would help you.

Can not see all the clips in large Icon view in my bin

I arranged my clips in a bin in large Icon view but i can not see all the clips in the bin while in that mode. I see the clips when in list mode or when i drag them out of the bin into the main bin. As soon I drag them back in large icon view bin they do not show up, when going back in list view they are there.
Any idea
Also my daughter accidently pulled the electrical plug, which turned my external hard drive off. So the media was off line. I hit reconnect the clip but the clip does not show as connected in the bin it keeps the Media offline icon but putting the clip in the viewer or time line it plays it. So the clip is reconnected
hope anybody can help with those two issues thanks

Nick
thanks for your message it helped to show the clips. Here how I solved it. I put the clips i could not see in large Icon view, to the Project folder. Even in the project folder I was only seeing the clips with Thumbnail in list view. When i hit large Icon view the clips disappeared, and they could not have been lower down as i only have about 5 folders in the project. I then clicked arrange the clip by name and they showed up again. Like that i dragged the clip back in to its bin and it showed up. The reason for going back and forth I arranged the clips manually in the bin before and when hitting arrange by name it spread them to far apart and put the clips not in a sequence I liked.
for the second part I followed Neil's suggestion it worked.

Can not see running jobs from, package

I have a problem with processing parallely runing jobs:
I am creating another immediately runned jobs in a main job. Those two parallel jobs (2 loads from different databases) have to be finished before I run next operation (working out loaded data). Problem is that, after starting those 2 parallel jobs, I can not see them by select from ALL_SCHEDULER_RUNNING_JOBS that is executed immediately after I create those jobs in a package. If I take a look into ALL_SCHEDULER_RUNNING_JOBS from anonymous statement I can see all my running jobs. Let's sum it up:
1/ Start of main job
2/ Running 2 immediately created jobs (load data)
3/ Checking in loop if jobs created in step 2 are still running
3.1/ Jobs are running (ALL_SCHEDULER_RUNNING_JOBS check) - sleep for a
while - It never happens - can't see any running jobs from select executed in
package but can see them in
anonymous statement
3.2/ Jobs finished - start processing loaded data
Can somebody help me with this task?
Thanks alot!
Jakub

Hi,
There is no reason a job should be visible from an anonymous block but not from inside a job. There are two things that may be happening here.
- jobs scheduled to run immediately my not start running as soon as they are created/enabled, you may need to wait a bit before they start running (they will appear in all_scheduler_jobs immediately but maybe not all_scheduler_running_jobs immediately)
- you may be running into privilege issues. Is the user that executes the anonymous block the same as the user that the job is running as (the job's schema) ? If not maybe the job user does not have privileges to see the job (you can grant alter on the job to the user to ensure this).
Can you see the jobs in the all_scheduler_jobs view from within the job with status RUNNING ? If you can see jobs in all_scheduler_jobs as RUNNING but not in all_scheduler_running_jobs then this is a bug of some sort.
Thanks,
Ravi.

Can not see Stored Procedures owned by "Code Owner"

Post Author: BinChen
CA Forum: Deployment
I am using Data Source defined with "CR Oracle ODBC Driver 5.0" in "Data Source (ODBC)".
But in Crystal Report XI, I can not see CodeOwner when I can created a new connection using ODBC (RDO).
I can see CodeOwner and all SP defined under it when I use "Oracle Server" directly or use sqlplus.

Post Author: BinChen
CA Forum: Deployment
I'm using Window XP with Oracle 10g2R
To be more clear,
I have an ODBC Data Source defined as "DEV" and when I created a connection using ODBC, I can only see some database account section like: APP, APPREF, PUBLIC, SYS, SUSTEM. But I can not see CodeOwner.
If I connected without using ODBC, I can also see CODEOWNER and then all its stored procedures.
So why I can not see Stored Procedures defined under CODEOWNER using ODBC?
I have an exsiting report, even I can not see CODEOWNER, but I have no problem to run and preview the report also to "verify database".

Can not see long text description of a characteristics in portal

Hi experts,
I designed two queries via Query designer and published them to portal but I can not see the the long text description of "Name" attribute belongs to 0BPARTNER characteristics.
One of the queries shows only the last name of partner in portal while it is showing full name and last name in Bex Analyzer. The other query shows only the key value in both portal and Bex Analyzer.
I want to see long text description in both queries.
For an additional information, I'm extracting data from CRM 5.00 to BW 7.00
What will be the reason for this and how can I solve it?
Can anyone help me for this issue, it's a kind of emergency situation.

Hi,
we have the same problem.
We want to change <b>only</b> in the screen variable the hierarchy text (from default to long\medium text) but even if there's a possibility to do this, really it doesn't happen anything - it' s possible when you start query, in the selection screen inside every the variable there's a command "User Settings" in which manage what you want to see (I put display custom, as text, medium text).
I try to do this also in query analizer, selecting variable (hierarchy) and enter in this (user setting), changing in display custom as text - medium text, but even if I save this settings, really doesn't happen anything.
It seems the system isn't sensitive to this selection...
By now, if someone has an answer, please write us!
Thanks in advance,
Alessandra Mirone

Why i can not see the columns of "Tax Category" in transaction code FS00

Dear Experts,
Why i can not see the columns of "Tax Category" and "Posting without tax allowed" in tab of "Control Data" transaction code FS00?
How can i add the columns of "Tax Category" and "Posting without tax allowed"?
Looking forward to your reply.
Best Regards,
Merry

Hi,
Go to transaction OBD4, and check whether the field "Tax category" is suppressed in group "Account control" for your GL account group.
If not, then go to OB26 and check the field status for the same field for create, change activity.
Regards,
Gaurav

Trying to install MS Office 2011 for Mac SP 2 on my Macbook Air (Lion 10.7.3). I have to close Microsoft Database Daemon and SyncServicesAgent but can not see how to do so. I have closed all applications. Can anyone help? Many thanks

Trying to install MS Office 2011 for Mac SP 2 (14.2.0) on my Macbook Air (Lion 10.7.3). I have to close Microsoft Database Daemon and SyncServicesAgent but can not see how to do so. I have closed all applications. Can anyone help? Many thanks

Thanks Kurt! I had tried all that and had tried closing both programmes from the application monitor, but SyncServices Agent refused to close. I tried closing Launchd which is their mother application, but that just caused the screen go go blank. In the end the two programmes let themselves be closed next time I tried the installation process so all was well. Thanks for your help!

IPod shuffle 2nd Gen....Can not see in iTunes or Windows

Bought two iPods,one a Nano works fine the other a shuffle does not.
I can not see it in either iTunes or Windows,it does appear to be charging via the USB Port (Lights Blinking etc) but nothing else.
As I can not see it in iTunes I can not reformat or do any of the other fixes sugested by Apple.
Now silly me I bought the items secondhand but unused so cant take this back to shop!
Help,its really teeing me off!
Thanks!

Bought two iPods,one a Nano works fine the other a
shuffle does not.
I hope you're not connecting them to your computer
simultaneously ... if so, connect one at a time.
No connecting one at a time.
I can not see it in either iTunes or Windows,it
does
appear to be charging via the USB Port (Lights
Blinking etc) but nothing else.
WHICH lights are blinking? The only normally
blinking light should be orange...showing that it's
in data mode AND that Windows recognizes it
(assuming, again, that you haven't connected both
iPods at the same time).
It should show up in the system tray...
Orange light flashes,does not appear in systems tray or in My Computer.
As I can not see it in iTunes I can not reformat
or
do any of the other fixes sugested by Apple.
Now silly me I bought the items secondhand but
unused
so cant take this back to shop!
Help,its really teeing me off!
Thanks!
Answer the questions I posed, then we'll move on...
Thanks for the reply !
Windows XP

Name of the table where can get the two fields Valid-From and Valid-to for

Hi gurus
I want name of the table where I can get the two fields Valid-From and Valid-To and their relation ship with the header table in BOM
Regards
Kaisar

You can only get the Valid from date from the table STKO.
To get the valid to date, you have to take one day less than the valid-from date of the next record for the same BOM.
Alternatively use the Function module:
CSAP_MAT_BOM_READ
It will give both valid from and valid to dates in the tables parameter: T_STKO
Regards,
Ravi
Edited by: Ravi Kanth Talagana on Jul 2, 2008 4:37 PM

Can not see two fields in Crystal 2008 Developer explorer/designer view

Similar Messages

Maybe you are looking for