Can not see wireless access point

I've wired both my laptop (windows7) and my wireless access point (wap54g) to my functional Neatgear switch. When I run the Linksys setup cd (from my laptop) I get the following message ...Can not locate a wap on this network. What am I doing wrong? Everything is powered up and all 3 lights on the wap are on.
Please help...

Have you tired to configure the WAP54G manually? If not you may try to connect your laptop directly to the access point's ethernet port and please make sure that the laptop has the same network IP as of the access point (192.168.1.***) then try to access the WAP54G set-up page via browser for you to configure it.

Similar Messages

AC 5.31 not seeing wireless access points

We have a single image that is used for all of Lenovo / IBM laptops, T40, T60, T61, T42, T500. On the T40 I encounter issues with access connections from the get go, it does not see any wireless access points. Also does not seem to be the program managing it as windows wireless networks icon pops up saying wireless networks found, upon clicking on the icon I see quite a few available.I do not see this happening on my other laptops, I have attempted to remove AC and uninstall the wireless lan card only to run into the same issue upon reinstalling it.
Please help,
Thanks!

Hi,
sorry for late quesiton, but how does it looks with the current Access Connection?
I assuem ,you are using XP. Correct?
Please describe this situation a bit more , likewifi driver verison, MTM of the , or at least one affected machine etc.
Thanks
Rgrds

Can not see wireless TM in disk utility or desktop.

Am I running a TM Airport (router) it runs great, I love everything about it and the backups have no issues.
But I wanted to partition my 500mb drive on my TM yet for some reason I can not see the drive either on my desktop or in disk utility. Is there some setting I need to change somewhere else to be able to view this wireless drive and configure it? I looked via Airport Utility and the only option there is to archive or erase it, at least that can see it.
When the backup starts I do see a mounted drive show up.
Any ideas?

It does not show up because when I am not backing up, it gets disconnected...

V570 can not see wireless n connection

Hello, I just bought a V570 5 days ago and noticed that the wireless adapter does not find my 802.11n signal but only the 802.11g signal. While the 2.4 GHz connection is ok, I expected to be able to connect to the faster network. I've tried to set up the connection manually it still does not show in the available list of connections. I've tried putting my new laptop within 2 feet of the router - no luck.
This is not a problem with my router - my work laptop (2 year old Lenovo ThinkPad) connects to my "n" network without a problem, as does my cell phone. I've checked the adapter settings and have the defaults set - 802.11n Channel Width for Band 2.4 set to 20 MHz and and 802.11n Mode enabled.
What I find interesting is that when I look at the adapter settings on my work laptop, it shows a setting that my new one does NOT have - 802.11n Channel Width for Band 5.2. Why do I not see this setting on my new laptop. Is this a problem? While I like the laptop, this is bugging me enough to return it if I don't find a solution soon.
Thanks for any help.
Solved!
Go to Solution.

Yeah, I know it's a bummer.
I was "burned" by this issue, when I bought my Y470. I just "assumed" that a brand new laptop, would include a wireless card that supported both channels. What I found out, after I received my new system, was that almost ALL laptops coming from Lenovo, only have B/G/N 2.4 Ghz cards. If you want a card with 5Ghz "A" support, you must upgrade the card in your original configuration order. The real kicker is, if you use the Lenovo outlet web pages to buy your system, you can not upgrade most of Idea Pads wireless cards. Those type of upgrades, seem to be only "offered" on Think Pad systems.
However, you can still buy, and install, and upgraded wireless card. I'm just not sure where you can buy it, and still be under warranty. See this thread:
http://forum.lenovo.com/t5/IdeaPad-Y-U-V-and-Z-series/Upgrading-wireless-card-in-Y470/m-p/476833#M39...
You would think that Lenovo would have a "parts" outlet web site, that I could go to and order an upgraded wireless card. But it's like pulling teeth, to get any kind of "after purchase" upgrade information out of them. I guess they're too busy selling their systems, instead of making sure they get "brand loyalty" such as IBM once did.
Still, I'm very happy with my Y470. And as I've said, I get a 144 Mbs connection using the OEM wireless card. I had to fiddle with my connection settings on the card, and also on my E3200 router, to achieve the 144, but I've gotten good range on the 802.11N, 2.4 Ghz connection. After all, isn't that what it's all about, anyway?
DragonRider
I'm DO'ing IT
Lenovo Y470 085525U 2nd generation Intel® Core™ i7-2630QM processor ( 2.00GHz 1333MHz 6MB )
IdeaCentre A520 Intel® Core™ i5-3230M processor ( 2.60GHz 2600MHz 3MB )
YOGA Tablet 2 Pro-1380F
X1 Carbon 2nd Gen (20A8) ThinkPad + T420

Macintosh os/9 not seeing my access points

I have a lab of 40 macintosh ibooks running OS/9 with the airport client. We recently replaced the Apple Airports with AP-350s running IOS 12.2(JA). Now, here is the problem. Ibooks running OSX work fine. the OS9's do not appear to be trying to find the APs. However, with the same scenario here in my office; if I turn on the Broadcast SSID option, the computer associates to the access point. If I turn off the Broadcast SSID option, the IBook seems to just do nothing, but it does give a 169.###.###.### IP address. When the Lab Tech took the Ibook back over to the lab, it did not work, even though I had turned the Broadcast on. They need these for a final next week. no pressure at all.

Try disabling the Aironet extensions feature on the Cisco APs. This feature is used by cisco wireless clients to exchange compatiblity information. Some of the non-cisco clients may not work with this feature enabled. Try disabling this. It should work.
For more information read http://www.cisco.com/en/US/products/hw/wireless/ps430/products_configuration_guide_chapter09186a0080606d4a.html#wp1135928

Apple TV 2G (Airplay and Homesharing) can only stream from devices on the same wireless access point range??

connection:
40 Mbps Fiber Broadband connection using:
Devices:
1. Main Modem/router (AP1): Huawei HG8245 (provided by ISP) - Wireless enabled.
2. Remote Access point (AP2): Linksys/Cisco E3200 Wireless gigabyte router flashed with DD-WRT v24-sp2 (06/14/11) mini (Cascaded -wired- LAN to LAN from main modem).
3. Wireless Repeater to cover a dead spot (AP3): Linksys/Cisco E1000 wireless repeater.
4. Apple Tv (AT2G) with home sharing/airplay enabled.
5.( Ipad) with home sharing on itunes enabled.
6. Win7 (PC) using iTunes with Home sharing enabled.
all devices are updated to their latest firmware.
In order to cover a large 3 story house with Wifi. I had (AP1) is located on the first floor, while (AP2) is located in the basement floor directly wired by LAN to LAN with (AP1). (AP3) is located on the Ground floor away from the living room to repeat wireless network into the back yard. While (AT2G) is located in the living room on the ground floor right in the middle of both (AP1) + (AP2) while connected via Wifi.
Network SSID, security, passphrase and wireless settings of (AP2) are identical to (AP1) to create a single big LAN/WLAN roaming network where all devices connected to both wireless access points can find/share the others. As understood, it's refered to as bridging.
I have noticed that my iphone/ipad does not show the airplay button anywhere within the wireless network. it seems that the apple TV randomly choses to connect to the AP with stronger signal, or switch to the other in case of a reboot to one of them.
to elaborate further, if i was sitting in the living room (groundfloor), trying to airplay some you tube contents via Wifi to my Apple TV, i may not find the airplay button available all the time, i found out the reason is while i'm wirelessly connected to AP1, the Apple TV was connected to AP2 and both deviced cannot detect each others to enable my purpose. that goes the same for Home Sharing. only if my Ipad/PC and Apple Tv are on the same wireless AP. they would detect each others immediately.
although, the second AP (AP2) is suppose to extend my wireless network of the same subnet in which any device connected can be found.
After all sorts of trial and error tweaking my router/access point, I thought the problem would be due to the Linksys 3200 capability of bridging WLAN and lacks few protocols that enables my purpose. i have flashed the firmware to a DD-WRT, but again, problem was not solved.
I have not tried having my Apple Tv wired to either router/AP, but i assume it may work well if i do so. i still need to solve this wireless connection issue though.
Am i the only one with this problem, would there be something wrong with my setup?
Your feedback is highly appreciated.

You may or may not already have your network set up correctly, it's just that I can't tell from what you have said.
I have a main router provided by my ISP, I have several other Airport Extremes and Airport expresses connected by Ethernet, all set up to bridge the network created by the main router.
Each maker has their own settings, but bridging should be reasonably obvious. In simple terms my main router distributes IP addresses to all devices, the Airports bridge that network by passing these addresses to the devices from the main router. A base station that isn't in bridging mode will distribute its own addresses to the devices connected to it.
I don't really follow your next point.
instruction for configuration vary from manufacturer to manufacturer, the best course of action here is to refer to the manual. If everything is set up properly the addresses of everything on your network will have identical sets of numbers for the first 3 of 4 groups of numbers that make up an address, the last set must always be different. I think the part you are referring to with your DD-WRT is the option to have Ethernet and wifi bridged or not.
Some routers may be easier to configure than others, but generally speaking they should all work with the Apple TV. 5Ghz is less likely to suffer interference but it is much more likely to be blocked by solid objects, it may or may not be an advantage.

Can I disable my Verizon Fios Router Wireless radio, connect it to a switch and use my airport express as my wireless access point connected to an in wall ethernet port?

Here's the deal. I have a Verizon Fios MI424WR router. My house has CAT5 throughout the house. The media panel is located in the garage. I want to take the Verizon Fios Router and cannot it in the media panel so I can connect a switch to it, that way, all my CAT5 can fire throughout the house. Verizon being Verizon decided to connect the router directly in the office.
Can I go this route (Router in media panel, switch cross connect to it) and use Airport Express, connected to one of the in-wall CAT5 ports in my house and then set it up as my wireless access point to provide wifi to my portable devices (iPad, iPhone, Macbook)? Is this possible? Will Airport Express comminicate with my verizon router via ethernet in-wall? Do I have to turn off the wireless radio in the Verizon router? Any help would be greatly appreciated!

That is right, by hard wired I was just making clear wired vs wireless attachment. AirPort family of devices will only act in a repeater mode with their own family members, not FiOS routers. they have to be wired to work.
There are some useful docs you can download from Apple, Support, Manuals, Peripherals, AirPort (just follow thos links from the Support button on the top bar):
Apple AirPort Networks
Designing AirPort Networks
AirPort Express Setup Guide
The last has a diagram of what you are trying to do, though without the house wiring, etc., but the basic principle.

I can't get my macbook to access shared files on a windows computer when it's connected through a wireless access point.

I recently bought a Netgear Wireless Access Point to use in the office so we can have a wireless network. I configured the wireless network, and I am currently connected to the internet. However, I no longer can access the shared files on the Windows computers like I could when I was hardwired in with an ethernet cable. I've disabled all of the internal firewalls on all of the computers (and there's no firewall built into the WAP), all the computers are on the same workgroup, and I've tried accessing the computer with the shared files directly via the IP address using the instructions found here http://docs.info.apple.com/article.html?path=Mac/10.5/en/8849.html.
My computer sees that the other computers on the network are there. They show up in the network view from the finder. However, when I try to connect to them, it tells me the connection failed. When I click connect as, it says:
"Connection Failed
"The server “PC-ASSISTANT” may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again."
When I try to connect via the "connect to server" on the finder, I type in "smb://10.0.0.103/Word Processing" It tells me:
"There was an error connecting to the server “10.0.0.103”. Check the server name or IP address, and then try again.
If you are unable to resolve the problem contact your system administrator."
I have no clue what the problem is. I'm not really an IT person or a networking guru. Can someone please help?

You posted in the Older Hardware forum, which is for pre-year 2000 hardware. Suggest you post your question in the Airport forum at https://discussions.apple.com/community/wireless/airport
 Cheers, Tom

Can I use iMac as wireless access point?

My network equipment: ADSL modem (which has no integrated wireless) with Buffalo AirStation (802.11b) wireless access point
I have had a reasonably stable broadband situation for a long time (hence the ancient equipment!) and have been able to access the internet via my ADSL modem/ethernet router using ethernet wires from my iMac G5, and two desktop PCs running Linux and Windows. I have also been able to access via the wireless Buffalo Airstation on various laptops over the years. My wife's brand new MacBook has been connecting wirelessly for a couple of weeks.
Until last night...
Then the AirPort signal dropped to zero and a neighbour's network was suggested as the network I need. I looked at the Buffalo Airstation and there was a flashing red light (and flashing green ones as well). Being an experienced chap I turned it off and turned it back on! For about five minutes the Airport signal was back. Then it disappeared with flashing lights as before. Repeated a few times with no change...
I don't know if the problem is related to the neighbour's wireless signal or not but I decided that it could be the AirStation getting flaky so I tried creating a network on the iMac with a view to sharing its wired connection.
I can log on to this iMac network from the MacBook and I have changed the Systems Preferences to share the connection on the iMac but the MacBook says it is not connected to the internet. Anyone got any ideas what I might be doing wrong? Should I be entering the ADSL modem router in the internet connection details (which is what I have done) or should I be entering something else?
Is what I am trying to do even possible? I haven't found any exact parallels in the documentation or the forums...
Any help greatly appreciated!

Does the Buffalo AirStation allow you to change the channel being used?
You can share an Internet connection over Ethernet to other computers using Airport. You set it up in System Preferences Sharing pane Internet tab (if using Tiger). On the MacBook, you should just use the default +Configure Using DHCP+ setting. Be sure you clicked to Start the sharing on the iMac. On the MacBook, be sure you select the wireless network that is the iMac's name.

Forgetting WiFi password, and not connecting to wireless access point automatically??

I'm using (until tomorrow when I get a MacBook Pro which HOPEFULLY won't have the same problem) a pre 2007 Macbook which is running Mac OS X 10.5.8. It was previously owned by my brother and passed onto me about 4 months ago. Within that time I've had nothing but problems with the WiFi connection!
The first issue would have to be that if I put the MacBook to "sleep" rather than turning off, it disconnects from WiFi during that process. Fine, that's to be expected. But when I wake it up, it's not only disconnected, but I have to re-enter my WiFi password in order to reconnect. Is there some reason that it will not remember the password through this sleep process? Turning off and on normally works fine, and it connects automatically, but not when it sleeps.
The second problem is equally confusing to my mind. In my house, we have a wireless access point upstairs (we have 3 floors after having our attic converted). All characteristics (name, password etc) are the same on the access point as on the main router downstairs. Every device in our house, included a couple of android phones, a tablet, and two laptops running various versions of Windows, all connect to this wireless access point with no problem at all. None of them have been "set up" to do so, in that they detect it as part of the same network and join it automatically. But for some reason, my MacBook won't do it? At first I would assume that perhaps it's due to the age of my MacBook and maybe some flaw in the old operation system, but my iPhone 4S running iOS 7 doesn't connect to this access point either. Is this some weird security thing that Apple use in their devices??
To make things even more frustrating, the MacBook's issue of remembering the WiFi password means that when I come back downstairs and into range of the main router, it's forgotten the password again and I have to re-enter it to reconnect.
Can some PLEASE offer some kind of assistance? I'm getting a brand new MacBook Pro tomorrow and if it's an OS issue then I assume I won't have it anymore, but I'm desperate to solve this issue one way or another considering this machine will be staying in the family and in this house so will pressumably have the same issues.
Thanks in advance guys! If I've not given enough info, just ask

I'm using (until tomorrow when I get a MacBook Pro which HOPEFULLY won't have the same problem) a pre 2007 Macbook which is running Mac OS X 10.5.8. It was previously owned by my brother and passed onto me about 4 months ago. Within that time I've had nothing but problems with the WiFi connection!
The first issue would have to be that if I put the MacBook to "sleep" rather than turning off, it disconnects from WiFi during that process. Fine, that's to be expected. But when I wake it up, it's not only disconnected, but I have to re-enter my WiFi password in order to reconnect. Is there some reason that it will not remember the password through this sleep process? Turning off and on normally works fine, and it connects automatically, but not when it sleeps.
The second problem is equally confusing to my mind. In my house, we have a wireless access point upstairs (we have 3 floors after having our attic converted). All characteristics (name, password etc) are the same on the access point as on the main router downstairs. Every device in our house, included a couple of android phones, a tablet, and two laptops running various versions of Windows, all connect to this wireless access point with no problem at all. None of them have been "set up" to do so, in that they detect it as part of the same network and join it automatically. But for some reason, my MacBook won't do it? At first I would assume that perhaps it's due to the age of my MacBook and maybe some flaw in the old operation system, but my iPhone 4S running iOS 7 doesn't connect to this access point either. Is this some weird security thing that Apple use in their devices??
To make things even more frustrating, the MacBook's issue of remembering the WiFi password means that when I come back downstairs and into range of the main router, it's forgotten the password again and I have to re-enter it to reconnect.
Can some PLEASE offer some kind of assistance? I'm getting a brand new MacBook Pro tomorrow and if it's an OS issue then I assume I won't have it anymore, but I'm desperate to solve this issue one way or another considering this machine will be staying in the family and in this house so will pressumably have the same issues.
Thanks in advance guys! If I've not given enough info, just ask

How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

The Guest Network function of the Time Capsule and AirPort Extreme cannot be enabled when the device is in Bridge Mode. Unfortunately, with another router...the Telus...upstream on your network, Bridge Mode is indicated as the correct setting for all other routers on the network.
If you can replace the Telus gateway with a simple modem (that performs no routing functions), you should be able to configure either the Time Capsule or the AirPort Extreme....whichever is connected to the modem....to provide a Guest Network.

When downloading is complete, I can not see, run, nor access the file; it only appears in the "Downloads" window (and not the specified folder) and the only options permitted are to delete it, or to go to the download web site; what's blocking it?

My PC's OS is 'MS Windows Vista Home Premium'. As my initil question states: When downloading, after the download completes, I can not see, run, nor access the file in it's designated folder. The download only appears in the "Downloads" window and the only "Right Click" options permitted are to "Remove From List", "Select All", & "Copy Download Link" I also can not double click to run it. What's blocking it?
I have a similar problem when accessing .zip files that are attachments to my emails. Here, however, I can place the file in a designated folder, however, the .zip file and it's compressed content files are file-typed as "FireFox Document" and I get permissions errors when running an unzip tool.
Why are my download files being quarantined ??? Is there a security setting option I need to change???
To get around this, I'm using IE to download and install these files, but switching back & forth between FireFox & IE is a real pain.

It's your anti-virus not working correctly while scanning. You can turn off the option to scan in Firefox's '''about:config''' by filtering for '''browser.download.manager.scanWhenDone''' and double-clicking that line to change the value to '''false'''

Can WRT54G be setup as a Wireless Access Point?

Does anyone know how to setup a router (WRT54G) to connect to other routers using a wireless connection and function as either a wireless access point or another router using the main router for it's internet and network connection?

you cannot get the WRT to connect wireless to any device as it is an access point.
However this same thing will work wired. All you need to do is change the LAN ip of the WRT to 192.168.1.50 from 192.168.1.1 and disable the DHCP on the WRT.
Connect both devices LAN to LAN , do not use the internet port of the WRT.

Can an iMac serve as a wireless access point server?

I have a current iMac with standard built in wireless capability but I'm on the net with wires (RJ45 twisted pair ethernet CAT5 cables). Can my iMac serve as a wireless access point for a new device in the house (Nintendo Wii)? Is there a setting I can turn on, or software that can be downloaded to have the iMac act as a server instead of just a client on a wireless network? I know that it's best to have dedicated hardware do this, but I'm looking for a software solution to use while I decide what to buy.
Currently I have a DSL connection and a star style home network. The DSL modem has an ethernet cable to a hub, and our 2 macs connect with wires to the hub. (I have an older DSL modem that has no wireless capability, I know that upgrading the DSL connection involves a new modem that includes wireless, but the phone company makes no guarantees about supporting Macs, so I have to do some research first.)
-Ken

If your iMac connects to internet from ethernet cable, you can use airport to share the connection wirelessly by creating a network from airport, then go to system preference > sharing > internet and enable internet sharing. But if you already have a wireless router, Mac should be compatible, there is nothing inherently different between iMac's airport and PC's wireless card.
For Wii, I have no experience myself but there are plenty of posts on this forum, like this one: http://discussions.apple.com/thread.jspa?messageID=4528652&#4528652
(linked to http://www.virtualmatt.com/?p=7)

Converting a BEFW11S4 V.2 router to a wireless access point. Can it be done?

I recently upgraded my home wireless router to an N device. Now, I'd like to use my old B wireless router as an access point to improve coverage on my property. I'd like to place it in a location in my house too distant from the N router to connect it with a cable. Any way to configure the old B router as a wireless access point?
Thanks for any help you can give me.
Dave

yes..u can certainly configure the router as an AP ... follow the steps below :
1)connect the B-router's port 1 to once of the LAN ports of the N-router
2)access the B-router's web ui , using its ip address
3)configure the wireless settings....in case , you want to make a roaming wireless network , the wireless settings on both the router should be same
4)if the ip add of the N-router is 192.168.1.1 , then change the ip add of the B-router to 192.168.1.2 and disable its DHCP server ..

Can not see wireless access point

Similar Messages

Maybe you are looking for