Can not select from v$mttr_target_advice

Hello
When i try to select from the view it never comes back and is a problem for the mmon process. Anyone have any ideas.

Could you pleasse post the error message and the version you are using?
Best Regards
Krystian Zieja / mob

Similar Messages

Can not select from SAPTOOLS.DB6PMCF

We use third-party tool to monitor our SAP systems. We receive an error
Can not select from SAPTOOLS.DB6PMCF
when we monitor DB2 database.
Function DB6PMCF is registered in SAPSID schema. Can I register it also in SAPTOOLS schema? What is a correct procedure for this?

Hi Milan,
I think you have to issue the following command for the affected user.
db2 "grant execute on function saptools.db6pmcf to <user>"
regards, Javier Rocha

Can not select from data dictionary view from a procedure

Hi,
I wonder, which privilege is missing here:
my schema has this roles and privs:
GRANT CONNECT, RESOURCE TO cb ;
GRANT CREATE SESSION TO cb ;
GRANT SELECT_CATALOG_ROLE TO cb ;
GRANT CREATE SYNONYM TO CB;
GRANT CREATE VIEW TO CB;
I create a procedure:
create or replace procedure dd_test as
begin
     dbms_output.enable(2000000);
     for r in (select table_name from sys.dba_tab_partitions     where owner = 'CB') loop
               dbms_output.put_line(r.table_name);
     end loop;
end;
sho err
4/38 PL/SQL: ORA-00942: table or view does not exist
When I run the core statement form sql prompt, it works !
so what privilege is missing here ???
thanks for any hint, Lao De

Hi,
thanks for that reply, after doing that I can not select this DD-view from sql-prompt anymore (which I don't wonder ;-). Can you tell me, what idea you had behind that test ?
I found another instance, where the procedure works and I will compare those privileges, but it's hard to sort out that complex structure of nested roles and sys_privs.
How ever, I will update here, when I found the missing privilege.
regards LaoDe

Can not select from my own MV. Please help.

Hello Gurus,
I have created a MV with following clauses
CREATE or REPLACE MATERIALIZED VIEW "OWNER_NAME1"."MV_Name1"
BUILD IMMEDIATE
USING INDEX
REFRESH COMPLETE
AS
SELECT column1, column2 .... from table1,table2
where .....
I have logged in to DB with the 'owner_name1' schema itself which is the owner of the MV.
But, when I try to select from the above MV. It gives error "Ora-00942 table or view does not exist"
I can see the same under 'user_objects' view as an object of owner_name1 schema.
Could you please help me in understanding where I have gone wrong?
DB - Oracle 9i on unix platform.
Thanks in advance!
Abhijit.

Oh! I missed to mention the exact steps followed by me which created error for me,
viz.
1) I have 2 Database and their users as follows
bq. i) DB1 in local server - 'localUser'
bq. ii) DB2 in remote server - 'RemoteUser1' and 'RemoteUser2'
2) 'RemoteUser2' user in DB2 has 'select' privilage on table 'RemoteTable1' of 'RemoteUser1' ( both are remote DB's users ! )
i.e. select * from RemoteUser1.RemoteTable1; --works okay when logged into RemoteUser2. no synonyms are created hence using schema_name.table_name convention.
3) Logged in to 'localUser' in DB1.
4) Created a DB link 'local_to_remote2' in 'localUser' schema ( in DB1) to 'RemoteUser2' schema (in DB2)
i.e.
create database link local_to_remote2 connect to RemoteUser2 identified by password using 'connection_string';
DBLink was created successfully.
5) I could select from the tables of 'RemoteUser2' using DB Link. (by logging in to 'localUser')
i.e. select * from RemoteUser1.RemoteTable1@local_to_remote2 ; --- gives me expected output. no issues!
6) Now, I created below MV in 'localUser' ( no need to tell in 'DB1' )
the exact syntax I used is as follows,
CREATE or REPLACE MATERIALIZED VIEW "localUser"."MV_Name1"
BUILD IMMEDIATE
USING INDEX
REFRESH COMPLETE
AS
SELECT column1, column2
From RemoteUser1.RemoteTable1@local_to_remote2
where condition1
and condition2;
The MV was created successfully, and I could see it as an 'Valid' object of 'localUser' schema.
i.e. select * from user_objects where object_name ='MV_NAME1' and status ='VALID' --- tells that above create MV is an object of owner 'localUser'
But, when I try to select from the said MV. it gives me error "Ora-00942 table or view does not exist"
i.e. select * from MV_Name1; ---- neither this
select * from localUser.MV_Name1; ---- nor this works :(
Even when I try to drop the same MV it gives me same error. :(
Could you please suggest me anything so that I will be able to select from MY OWN MV ?
Please help Gurus.

Can not select from gv$ table in trigger...please help.

I have the following SQL in my trigger which I am using in mt cursor.
cursor sessioninfo is
    SELECT s.LOGON_TIME,
           i.INSTANCE_NAME,
           s.SERIAL#,
           s.MACHINE,
           s.PROGRAM,
           s.MODULE
      FROM gv$SESSION s, gv$instance i
     where i.INST_ID = s.INST_ID
       and s.SID = (select sys_context('USERENV', 'SID') from dual)
       and s.USERNAME =
           (select sys_context('USERENV', 'SESSION_USER') from dual);I get the following error:
Compilation errors for TRIGGER DBAGUNNER.TRG_SERVICENAMELOGON
Error: PL/SQL: ORA-00942: table or view does not exist
Line: 22
Text: FROM gv$SESSION s, gv$instance i
Now, I have the DBA role and when I run this query by itself it works fine. But when I try and compile the trigger I get the error. I am creating the trigger as me as well.
Version of DB is 11gR1
Any idea's why I am getting this or a way around this?
Edited by: Gunners on Feb 4, 2010 1:05 PM

Privileges granted through roles are not valid in pl/sql.
GRANT SELECT ON gv$SESSION to YOURUSERMax
[My Italian Oracle blog|http://oracleitalia.wordpress.com/2010/01/31/le-direttive-di-compilazione-pragma/]

Can not select an address from Contacts in Maverick

I'm able to access my address book contacts from Mail.
But when Contacts window is open, I can not select a contact (For, CC, Bcc Fields are in grey).
Is there anyone with suggestions?
Many thanks!

Hello
I am not selecting a group. I am just trying to select a contact, any contact.
But when I click on contacts icon ...
and the address book opens, nothing happens when clicking on a specific contact.
Besides, the fields For (= Para), Cc and Bcc, are not active...
Many thanks

ADF 11g can not select and copy data from cell of readonly table in IE

hi,
In ADF 11g, when render view object as readonly table with Single RowsSelection, using IE browser can not select and copy data from the cell, but it work in firefox.
is it a bug?
Edited by: kent2066 on 2009-5-18 上午8:46

Hi Timo,
Sorry forgot to mention versions.
We are using 11.1.1.7 and IE 9.
I tried in Google but could not get the solution.
Kindly let me know solution for this.
PavanKumar

Concerning Epson Printer 4880: after changing the Ink from Photo Black to Matte Black I'm not getting the Epson Software in Photoshop and Lightroom. I can not select the paper medium, I don't see my profiles. What is wrong?

Concerning Epson Printer 4880: after changing the Ink from Photo Black to Matte Black I'm not getting the Epson Software in Photoshop and Lightroom. I can not select the paper medium, I don't see my profiles. What is wrong?

That is priceless!!! Thanks! I sure needed a good laugh after spending/wasting hours & days trying to either get my c6280 to give up on its Ink System Failure fixation, or find a decent replacement. Unfortunately I need the Smart Web Printing feature that I guess only HP has, or I'd try a different brand. And now even HP has very few models with that available.
My error msg is a little different from those previously stated, but close: 0xc18a0201. Even tho there were frustrations with my c6280, I did like several of its unique features which are hard to find now under $100. I hate how HP (& I suppose other brands also) are CONSTANTLY changing models & then of course ink cartridges.
Oh heavens, I've had the c6280 a whopping 2 1/2 years! I'm sure they want us poor slobs to have to buy a new one every year & a day! To say nothing of the exorbitant prices for ink. And now if this one is really dead in the water, I have SIX unused #02 ink cartridges which I cannot return---I got them in a combo pack, & for some reason have wound up with THREE lite pink & THREE lite blue cartridges, while having to buy extras of the other colors, that ran out before the others!!! Yeah, & what's with that not being able to print in BLACK if a color runs out????
Anyway I really loved your essay! It's a classic! And says it all! I hate that we have to be 'slaves' to the electronic 'wonders'!!!

I can not print from QUICKEN . I have tried selecting the HP 960c series as per your directions,

I need help. I can not print from QUICKEN to my HP Officejet J6480 printer. Nothing happens. It was working in the recent past. NOw that I need to print out the remainder of my record for income tax prep, it won't print. I can not thinnk of a single thing that I have doen differently. I followed the directions to have a second printer HP 990c to "fool" the program into using it but it still does nothing. I have downloaded drivers etc, unplugged and replugged etc. "QUICKEN" is useless and says that HP is working on it. Can someone help me please

Hi there morinallen,
Try downloading and running the print and scan doctor located here to ensure there are no software conflicts:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
It can fix a lot on its own and if not give a better idea of what is going on.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Can not select 'Show HD' in Finder Preferences

Just performed Data Migration on a new iMac Intel late 2011 from a 2 year old iMac Intel. For some reason, the Macintosh HD does not display on the desktop. If I go to Finder Preferences I can not select Hard Disks. The box is not selected, but If I try to click it, it will not stick. How do I fix that. Not much on the internet concering this peculiarity.

OK, try a couple of things. First is to do some resets, the first I'd recommend doing is restarting the computer in Safe Mode, this will clear some caches. It's possible one is corrupt. Next is to reset the SMC and PRAM, each of these should be done 2x to ensure they work. Finally if that doesn't do it open Disk Utility (Applications - Utilities - Disk Utility) and Repair Disk Permissions 2x.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Can not select external input for sound

can not select external input for sound

Hey there RoosterMonkey,
It sounds like you have Soundtrack Pro installed but you cannot select your external audio device as an input. I recommend the troubleshooting steps from the article named:
Soundtrack Pro 3: Troubleshooting Basics
http://support.apple.com/kb/ht3659
Update to the latest software versions
From the Apple () menu, choose Software Update and make sure that you have the most recent updates for your versions of Soundtrack Pro 3, QuickTime, Compressor, Pro Application Support, and other important system files. Installing the latest updates ensures that your software has the latest improvements and enhancements.
Note: Be sure the application is in the Applications folder and is named Soundtrack Pro before running Software Update.
Check compatibility and driver versions for third-party devices
If you're using a third-party sound card, MIDI interface, storage system, control surface, or plug-in, check the support area on the manufacturer's website to be sure that you're using the latest version of the relevant driver or other software for your product. For information on troubleshooting possible issues with Audio Unit plug-ins, go to Soundtrack Pro 3: Troubleshooting Audio Unit plug-in issues.
Try a different Multitrack Project or Audio File Project
Sometimes project files can become damaged, causing unexpected behavior in Soundtrack Pro. To create a fresh project, choose File, then New and select Multitrack Project or Audio File. Test to see if the issue is resolved in the new project.
Delete the User Preferences
You can resolve many issues by restoring Soundtrack Pro to its original settings. This will not impact your project files. To reset your Soundtrack Pro user preference settings to their original state:
Quit Soundtrack Pro if it is open.
In the Finder, choose Go > Go to Folder from the menu bar.
Type ~/Library/Preferences in the "Go to the folder" field.
Remove the "com.apple.soundtrackpro.plist" file from the Preferences folder.
In the Finder, choose Go > Go to Folder from the menu.
Type ~/Library/Application Support/Soundtrack Pro in the "Go to the folder" field.
Remove the "EffectsCache.plist" file from the Soundtrack Pro folder.
In the Finder, choose Go > Go to Folder from the menu.
Type ~/Library/Application Support/Soundtrack Pro/Layouts in the "Go to folder" field.
Remove the "Soundtrack Pro.saved.moduleLayout" file from the Layouts folder.
In the Finder, choose Go > Go to Folder from the menu.
Type ~/Library/Caches in the "Go to folder" field.
Remove the "com.apple.audiounits.cache" from the Caches folder.
Remove receipts and reinstall Soundtrack Pro 3 and Compressor
Another approach you might consider is reinstalling Soundtrack Pro and Compressor. To do this effectively, you need to remove the applications and their receipts, then install Soundtrack Pro and use Software Update to install additional updates. Compressor gets installed automatically when you install Soundtrack Pro. You don't have to remove everything that was installed with Soundtrack Pro, so follow the steps below to completely reinstall a fresh copy of Soundtrack Pro. Note: Make sure that you have your installation discs handy before beginning.
In Mac OS X v10.6 Snow Leopard or OS X Lion
Open the Terminal application and enter the following commands one at a time and an administrator password when prompted. Note: The commands are case sensitive.
sudo pkgutil --forget com.apple.pkg.Compressor
sudo pkgutil --forget com.apple.pkg.Qmaster
sudo pkgutil --forget com.apple.pkg.VideoOutSupport
sudo pkgutil --forget com.apple.pkg.PSTSharedA
sudo pkgutil --forget com.apple.pkg.AppleHDVCodec
sudo pkgutil --forget com.apple.pkg.AppleIntermediateCodec
sudo pkgutil --forget com.apple.pkg.DSPPublishing
sudo pkgutil --forget com.apple.pkg.SoundtrackPro
sudo pkgutil --forget com.apple.pkg.Uncompressed422
Then, reinstall Soundtrack Pro and Compressor using the following steps:
Open the Applications folder. Drag the Soundtrack Pro and Compressor applications to the Trash.
Insert your Logic Studio or Final Cut Studio installation disc and install Soundtrack Pro.
When finished installing, choose the Apple () menu, then Software Update to update your software to the latest version.
Open Soundtrack Pro to verify that the issue has been resolved.
Thank you for using Apple Support Communities.
Cheers,
Sterling

Can not cast from object to int

Hi All,
I have the following bunch of code
Session session;
          session = getSessionFactory().openSession();
          Query query;
          int MaxPageId = 0;
          List list;
          try{
               query = session.createQuery("select max(emp.id) from EmpBean emp");
               list = query.list();
               MaxPageId = (int) list.get(0);
               return MaxPageId;
          catch(Exception e){
               System.out.println(e.getMessage());
          return MaxPageId;
The query executed successfully but when i get the max id in a integer variable by the following statement
MaxPageId = (int) list.get(0);
I get the following error "can not cast from object to int"
Please suggest for the same.
-Thanks

Cast to an Integer, not an int, and let autoboxing turn the Integer into an int.
int maxPageId;
maxPageId = (Integer) list.get(0);You can't cast objects into primitives.
Autoboxing isn't casting.
And use Java naming conventions. Local variables start with a lower-case letter.

Can I Select from table skipping extents linked with lost datafiles?

Hi~,
I need your help to recover my database.
I'm using oracle 9.2.0.8 at Fedora 3 with no-archive mode.
and I don't have any backup.
Last night, I experenced hard disk failure.
I tried OS-level recovery, but I lost some datafiles of tablespace.
anyway, I wanted to recover my database without data of lost datafiles.
so, I issued "alter database datafile offline drop" and
start oracle instance.
But, datafiles were not removed from dba_data_files view and
extents linked with lost datafiles were not removed from dba_extents view!
Selecting query of some table containing extents linked with lost data files,
I got "ORA-00376: file xxx cannot be read at this time" message.
So, my question is that..
HOW CAN I SELECT FROM THAT TABLE WITHOUT SCANNING EXTENTS LINKED WITH LOST DATA FILES?
Thanks.

Hi,
Without being in archivelog and without backup, one can't do any sort of recovery. That's why backups and archivelog are so so important.
The offline data file command never does actually drop the datafile. It merely indicates to the control file that now the said tablespace will also be dropped. This won't update any view that the files are not supposed to be used or shown to you anymore.
This is what documentation says about the recovery of the database in the NoARch mode,
http://download.oracle.com/docs/cd/B19306_01/backup.102/b14191/osrecov.htm#i1007937
You do need a backup in order to get those tables being read. Oracle doesn't have any feature which can offline/skip the missing extents for you and let you read the data without them.
HTH
Aman....

I can not upgrade from 10.2 to 10.6 because of missing "itunes.msi" file. How do I repair it? I can not remove itunes and start over.

I can not upgrade from 10.2 to 10.6 because of missing "itunes.msi" file. I can not delete ITunes and start over either.

Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Set preset values that can be selected from a pull-down manu

I am writing a VI in LabView 7.1 to collect data. I have a set of variables that need to be set at the beginning. I used Basic Information subVI to input these variables to be saved in the data file header, but everytime I run the VI I have to type in pretty much the same thing. The variables I use usually can be selected from a list of number, text or Y/N. I thought about using Configure File VI, but I think that will only give me a fixed set, not a choice. I wonder if there is a way to preset a list of variables so that I can select one value from the list rather than type in everything each time.
Thanks,
Ron

1. Write a Vi that have all your variables i.e. enum, ring, text controls, boolean controls etc
When this Vi is called, it allows user to configure all settings
There will be a "save" button. Upon clicked, it should prompt user to input a filename (i.e. *.ini) and the file will be saved to a pre-determined directory i.e. LabVIEW Default Directory
With the above, a new *.ini file is created for respective set of variables.
2. Knowing that all *.ini files are stored at LabVIEW Default Directory, make use of the attached example VI, modify it to suit your needs, to get all *.ini filenames and update to the Combo Box control
With the Combo Box control, you can now choose the desired configuration file (*.ini) to be loaded for the rest of the test needs.
3. The selected *.ini file path is now input to a Vi that does the extraction of all variable settings from the selected *.ini file.
Above is just one of many ways that you could have a pull-down menu for selecting a set of settings from a set of configuration files.
Hope this make sense to you
Cheers!
Ian F
Since LabVIEW 5.1... 7.1.1... 2009, 2010
依恩与LabVIEW
LVVILIB.blogspot.com
Attachments:
IFK_CFIO_Get Filenames to Combo Box.vi ‏30 KB

Can not select from v$mttr_target_advice

Similar Messages

Maybe you are looking for