Can not "select" partitioning snapshot ?

I can create partitioning snapshot ( Oracle 8 ) , but I can
issue SELECT statement with partition-extended object name
Ex : Selet * from snapshot_name patition ( par_name )
How to SELECT data from snapshot with partition-extended object
name ?
null

Similar Messages

This disc can not be partitioned because it is impossible to move some of its files.

my boot camp do not work "This disc can not be partitioned because it is impossible to move some of its files." what to do? is there a way to partition mac without boot camp

Hard drives write data from the top down, if you delete data it doesn't magically shift upwards so there is remaining data on the lower part where BootCamp needs to go.
Apple has not resoved this issue when creating Bootcamp partitions for you, and likely they never will.
The only option is to use a blank powered external drive and (free) Cabon Copy Cloner your OS X partition to the external drive (default settings fine), then reboot holding the option key down so you can select this external drive to boot from.
Once you have marveled at the coolness factor of a bootable clone, you have to erase the internal OS X paritition using the Disk Utility > Zero erase (one step below max security on 10.7) and once that's finished, to use Carbon Copy Cloner to clone the clone to the internal OS X partition.
Once you do that you can boot the comptuer normally and then easily create the Bootcamp partition.
It's a pain, but it's the only way to shift ALL and ANY data upwards on the OS X partition to make room for BootCamp, which starts at the bottom and works upwards until it hits OS X data.
Siince your OS X data is hit pretty fast, below the minimal BootCamp requirements for Windows 7, this is why it's not being created.
Hope that explains your issue.
If it went over your head, perhaps you need to have a professional install Bootcamp and perform this function for you.

Can not select from data dictionary view from a procedure

Hi,
I wonder, which privilege is missing here:
my schema has this roles and privs:
GRANT CONNECT, RESOURCE TO cb ;
GRANT CREATE SESSION TO cb ;
GRANT SELECT_CATALOG_ROLE TO cb ;
GRANT CREATE SYNONYM TO CB;
GRANT CREATE VIEW TO CB;
I create a procedure:
create or replace procedure dd_test as
begin
     dbms_output.enable(2000000);
     for r in (select table_name from sys.dba_tab_partitions     where owner = 'CB') loop
               dbms_output.put_line(r.table_name);
     end loop;
end;
sho err
4/38 PL/SQL: ORA-00942: table or view does not exist
When I run the core statement form sql prompt, it works !
so what privilege is missing here ???
thanks for any hint, Lao De

Hi,
thanks for that reply, after doing that I can not select this DD-view from sql-prompt anymore (which I don't wonder ;-). Can you tell me, what idea you had behind that test ?
I found another instance, where the procedure works and I will compare those privileges, but it's hard to sort out that complex structure of nested roles and sys_privs.
How ever, I will update here, when I found the missing privilege.
regards LaoDe

Can not select 'Show HD' in Finder Preferences

Just performed Data Migration on a new iMac Intel late 2011 from a 2 year old iMac Intel. For some reason, the Macintosh HD does not display on the desktop. If I go to Finder Preferences I can not select Hard Disks. The box is not selected, but If I try to click it, it will not stick. How do I fix that. Not much on the internet concering this peculiarity.

OK, try a couple of things. First is to do some resets, the first I'd recommend doing is restarting the computer in Safe Mode, this will clear some caches. It's possible one is corrupt. Next is to reset the SMC and PRAM, each of these should be done 2x to ensure they work. Finally if that doesn't do it open Disk Utility (Applications - Utilities - Disk Utility) and Repair Disk Permissions 2x.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Can not select an address from Contacts in Maverick

I'm able to access my address book contacts from Mail.
But when Contacts window is open, I can not select a contact (For, CC, Bcc Fields are in grey).
Is there anyone with suggestions?
Many thanks!

Hello
I am not selecting a group. I am just trying to select a contact, any contact.
But when I click on contacts icon ...
and the address book opens, nothing happens when clicking on a specific contact.
Besides, the fields For (= Para), Cc and Bcc, are not active...
Many thanks

Can not select from SAPTOOLS.DB6PMCF

We use third-party tool to monitor our SAP systems. We receive an error
Can not select from SAPTOOLS.DB6PMCF
when we monitor DB2 database.
Function DB6PMCF is registered in SAPSID schema. Can I register it also in SAPTOOLS schema? What is a correct procedure for this?

Hi Milan,
I think you have to issue the following command for the affected user.
db2 "grant execute on function saptools.db6pmcf to <user>"
regards, Javier Rocha

Can not select external input for sound

can not select external input for sound

Hey there RoosterMonkey,
It sounds like you have Soundtrack Pro installed but you cannot select your external audio device as an input. I recommend the troubleshooting steps from the article named:
Soundtrack Pro 3: Troubleshooting Basics
http://support.apple.com/kb/ht3659
Update to the latest software versions
From the Apple () menu, choose Software Update and make sure that you have the most recent updates for your versions of Soundtrack Pro 3, QuickTime, Compressor, Pro Application Support, and other important system files. Installing the latest updates ensures that your software has the latest improvements and enhancements.
Note: Be sure the application is in the Applications folder and is named Soundtrack Pro before running Software Update.
Check compatibility and driver versions for third-party devices
If you're using a third-party sound card, MIDI interface, storage system, control surface, or plug-in, check the support area on the manufacturer's website to be sure that you're using the latest version of the relevant driver or other software for your product. For information on troubleshooting possible issues with Audio Unit plug-ins, go to Soundtrack Pro 3: Troubleshooting Audio Unit plug-in issues.
Try a different Multitrack Project or Audio File Project
Sometimes project files can become damaged, causing unexpected behavior in Soundtrack Pro. To create a fresh project, choose File, then New and select Multitrack Project or Audio File. Test to see if the issue is resolved in the new project.
Delete the User Preferences
You can resolve many issues by restoring Soundtrack Pro to its original settings. This will not impact your project files. To reset your Soundtrack Pro user preference settings to their original state:
Quit Soundtrack Pro if it is open.
In the Finder, choose Go > Go to Folder from the menu bar.
Type ~/Library/Preferences in the "Go to the folder" field.
Remove the "com.apple.soundtrackpro.plist" file from the Preferences folder.
In the Finder, choose Go > Go to Folder from the menu.
Type ~/Library/Application Support/Soundtrack Pro in the "Go to the folder" field.
Remove the "EffectsCache.plist" file from the Soundtrack Pro folder.
In the Finder, choose Go > Go to Folder from the menu.
Type ~/Library/Application Support/Soundtrack Pro/Layouts in the "Go to folder" field.
Remove the "Soundtrack Pro.saved.moduleLayout" file from the Layouts folder.
In the Finder, choose Go > Go to Folder from the menu.
Type ~/Library/Caches in the "Go to folder" field.
Remove the "com.apple.audiounits.cache" from the Caches folder.
Remove receipts and reinstall Soundtrack Pro 3 and Compressor
Another approach you might consider is reinstalling Soundtrack Pro and Compressor. To do this effectively, you need to remove the applications and their receipts, then install Soundtrack Pro and use Software Update to install additional updates. Compressor gets installed automatically when you install Soundtrack Pro. You don't have to remove everything that was installed with Soundtrack Pro, so follow the steps below to completely reinstall a fresh copy of Soundtrack Pro. Note: Make sure that you have your installation discs handy before beginning.
In Mac OS X v10.6 Snow Leopard or OS X Lion
Open the Terminal application and enter the following commands one at a time and an administrator password when prompted. Note: The commands are case sensitive.
sudo pkgutil --forget com.apple.pkg.Compressor
sudo pkgutil --forget com.apple.pkg.Qmaster
sudo pkgutil --forget com.apple.pkg.VideoOutSupport
sudo pkgutil --forget com.apple.pkg.PSTSharedA
sudo pkgutil --forget com.apple.pkg.AppleHDVCodec
sudo pkgutil --forget com.apple.pkg.AppleIntermediateCodec
sudo pkgutil --forget com.apple.pkg.DSPPublishing
sudo pkgutil --forget com.apple.pkg.SoundtrackPro
sudo pkgutil --forget com.apple.pkg.Uncompressed422
Then, reinstall Soundtrack Pro and Compressor using the following steps:
Open the Applications folder. Drag the Soundtrack Pro and Compressor applications to the Trash.
Insert your Logic Studio or Final Cut Studio installation disc and install Soundtrack Pro.
When finished installing, choose the Apple () menu, then Software Update to update your software to the latest version.
Open Soundtrack Pro to verify that the issue has been resolved.
Thank you for using Apple Support Communities.
Cheers,
Sterling

ADF 11g can not select and copy data from cell of readonly table in IE

hi,
In ADF 11g, when render view object as readonly table with Single RowsSelection, using IE browser can not select and copy data from the cell, but it work in firefox.
is it a bug?
Edited by: kent2066 on 2009-5-18 上午8:46

Hi Timo,
Sorry forgot to mention versions.
We are using 11.1.1.7 and IE 9.
I tried in Google but could not get the solution.
Kindly let me know solution for this.
PavanKumar

My phone is no wifi. I can not select the button. this situation has happened to me several times and I have spent lots of money on repairs. what can I do?

my phone is no wifi. I can not select the button. this situation has happened to me several times and I have spent lots of money on repairs. what can I do?

Bring your phone to Apple for evaluation and replacement. It's broken. There's no magic we can provide you.

Time machine can not select my internal hard drive any more.

Hi all
Time machine can not select my internal hard drive any more. I only can back up external disks. Does anyone know how to fix this?
All answers are much appreciated

I don't know the answer but I have the same thing happen. I have two external drives I use for backup. Sometimes it can see one and sometimes another. Then sometimes it can't see either one. I will take one out for a while then plug it back in and then it may see it. Maybe it's a cable issue or something but I will be curious to hear what someone more knowledgeable says.

Can not select a PDF file in the file uploader window after clicking the Browse... button for a file type input element.

After upgrading to 5 (this worked in 4) I can not select a PDF file in the File Upload dialog that appears when I click the Browse button next to an HTML file type input element. The specific HTML element source code has the attribute: ACCEPT="image/*". I can select image files such as jpg, png, tiff, etc. But not PDF. This worked great in Furefox 4 and works in the latest version of Safari.
The HTML code for the form element is:
INPUT TYPE="file" NAME="file_1" ACCEPT="image/*" SIZE=35
The File Upload dialog lists all files with PDF extension as dimmed and not selectable in Firefox 5.
Can you help?

Hi Purush
Unfortunately we couldn't solve the problem. Our IT specialist checked it with SAP directly. SAP doesn't support the SAP KW solution anymore. Therefore we checked-in the document in ".doc"-Format.

Concerning Epson Printer 4880: after changing the Ink from Photo Black to Matte Black I'm not getting the Epson Software in Photoshop and Lightroom. I can not select the paper medium, I don't see my profiles. What is wrong?

Concerning Epson Printer 4880: after changing the Ink from Photo Black to Matte Black I'm not getting the Epson Software in Photoshop and Lightroom. I can not select the paper medium, I don't see my profiles. What is wrong?

That is priceless!!! Thanks! I sure needed a good laugh after spending/wasting hours & days trying to either get my c6280 to give up on its Ink System Failure fixation, or find a decent replacement. Unfortunately I need the Smart Web Printing feature that I guess only HP has, or I'd try a different brand. And now even HP has very few models with that available.
My error msg is a little different from those previously stated, but close: 0xc18a0201. Even tho there were frustrations with my c6280, I did like several of its unique features which are hard to find now under $100. I hate how HP (& I suppose other brands also) are CONSTANTLY changing models & then of course ink cartridges.
Oh heavens, I've had the c6280 a whopping 2 1/2 years! I'm sure they want us poor slobs to have to buy a new one every year & a day! To say nothing of the exorbitant prices for ink. And now if this one is really dead in the water, I have SIX unused #02 ink cartridges which I cannot return---I got them in a combo pack, & for some reason have wound up with THREE lite pink & THREE lite blue cartridges, while having to buy extras of the other colors, that ran out before the others!!! Yeah, & what's with that not being able to print in BLACK if a color runs out????
Anyway I really loved your essay! It's a classic! And says it all! I hate that we have to be 'slaves' to the electronic 'wonders'!!!

Forms services after reboot, can not select to start

I started my infrastructure successfully, then went to start up my middle tier and noticed that my forms services checkbox in system components was grayed out. I can not select it to start it.
thanks for any help
Jon

Hi,
A grayed-out box for Forms services is normal.
The Forms and Reports servlets runs in OC4J_BI_Forms container. To restart Forms, restart the OC4J_BI_Forms container using EM or the command line opmnctl tool.
I have one machine running a 10.2.0.2 infrastructure and mid-tier where Forms shows down in EM but OC4J_BI_Forms shows up. Forms works normally - have not been able to figure out why Forms status is wrong. It works normally on other machines, so it is probably a communication problem with EM and not a problem with Forms itself.
HTH,
Jim

I use the google search bar for everything and since downloading FF4 i can not select any of the suggestions in the google drop down menu

I use the google search bar for everything and since downloading FF4 i can not select any of the suggestions in the google drop down menu.
I have tried to select one of the suggestions that google give me for my search but FF it wont let me. I have type everything out in full. I hate FF4 it is rubbish. I loved firefox before this one came out but now I am seriously thinking of going over to google chrome.

Many thanks for the prompt reply, ideato.
One of the reasons I abandoned Chrome in favour of Firefox was due to the "black band of doom" that appears on the top of the Google page - so setting up my homepage to google.co.uk just puts that back in the ugly spotlight.
I was, though, pleasantly surprised to see a Google search bar on the Mozilla Firefox Start Page (without the black band and Google options that I am just not interested in) but bitterly disappointed that it is Google.fr (due to my ISP being French).
I shall learn to live with Yahoo (or worse case scenario, Bing!)
rgds, PG

I can not select items in the checkboxes to "Total".

When I select the Add function, the entry file names come up in a new box. The select "ALL" button works, but you can not select individual entries.
Thank you.

The ssetive area is not quite the selection box. You can try enarlarging the view and click around the edge of the chec box.

Can not "select" partitioning snapshot ?

Similar Messages

Maybe you are looking for