Can not send e-mail messages at times.

Most of the time I am able to send e-mail but sometimes I get a message that says cannot send message using the server smtp.charter.net I do not need a password for this server and when I run diag I get green connection for both the pop server as well as smpt server. However the message will not send. Any ideas other then deleteing the message, because everything work fine after deleteing it.

Yes, I got a green light for the server not sure if its port 25 though did not look. I deleted the message so I have to wait for it to happen again. This is an iMac 24 inch so it does not move around. I have it connected to the wireless home network and all other wireless routers are also encripted so it sould not switch routers.
I was thinking that there might have been a bad char in the message that caused the trouble. Other thoughts, is that its a group message that hangs the server from time to time. Any ther ideas please let me know. Thanks.

Similar Messages

HT4061 I recently switched from my iphone to a samsung Galaxy S4, trading in my iphone. I now can not send/receive text messages from any iphones to my galaxy S4. Since I traded the iphone in, I can't access it to make any changes. Any ideas?

I recently switched from my iphone to a samsung Galaxy S4, trading in my iphone. I now can not send/receive text messages from any iphones to my galaxy S4. Since I traded the iphone in, I can't access it to make any changes. Any ideas?

http://support.apple.com/kb/TS5185

Can not send e-mail in mac os x 10.4.11

can not send e-mail in mac os x 10.4.11

non sequitur wrote:
I'm not sure I know what you mean by 'what settings are you using in the accounts part of mail preferences', but I'll give you as much information as I can in the hopes that some of it is responsive.
In "preferences" I select "accounts" and there are 3 listed:
'personal gmail' (IMAP)
'business gmail' (IMAP)
'Yahoo' (POP)
For each of the above, the "Account Information" tab gives:
description: [username]
email address: [correctly reflects my address]
full name: [my name]
Incoming mail server: imap.gmail.com
user name: [my username]
password: [*** - I've re-entered to ensure it is my true password]
outgoing mail server (SMTP): smtp.gmail.com:username
Is it all in the same format on the iphone?
This is the same information for the 2 gmail accounts, with the exception of the usernames differing. If I click "server settings" at the bottom, it reflects the outgoing mail server "smtp.gmail.com" server port 25, my correct user name and password.
Again, different names for the different accounts, right? And this is the same port etc. as you put into the iphone
All of the above information matches what I input into my iPhone, and it has worked fine since day 1, so I don't understand the malfunction.
Open /Applications/Utilities/Console. Make sure console.log and system.log are open (or see the File menu).
Try to send an email.
Look for new lines in the log files (it should scroll down automatically so the newest lines are at the end of the log at the bottom of the window). What do you see? (Erase or substitute for any personal info before posting.)
Do you use any firewall software or have you used third-party software or Terminal to configure the builtin firewall?
- cfr

Can not send be-mail os10.9.4 server offline !!

can not send be-mail os10.9.4 server offline !!

Hey there mikeneiris,
It sounds like you are not able to send any emails because the account is showing as offline. I recommend these steps from the following article to help you get that going again:
Mail (Mavericks): If a mailbox is offline
http://support.apple.com/kb/PH14925?viewlocale=en_US
To take an account online, click the lightning bolt icon. Or choose Mailbox > Online Status > Take [account name] Online, or Mailbox > Take All Accounts Online.
If you can’t take an account online, make sure you’re connected to the Internet. If a warning icon appears after the account name, click it for more information.
Use Connection Doctor
Some mailbox names can appear dimmed if you don’t have permission to access them, such as “public” mailboxes on a server, or if the mail server is unavailable.
Thank you for using Apple Support Communities.
All the best,
Sterling

I am currently abroad in France, and I can not send any SMS messages.

I am currently abroad in France, and I can not send any SMS messages. iMessages works fine. I have checked the setting, and message sending to SMS is activated. I have also reset my phone. Could you advise on why I can not do this please?

Hi
It could be a case that the network you are connected to is having problems.
If you go to Settings > Carrier > Turn off Automatic > This will prompt the device to do a manual search. Once completed chose a different network and test.
Also is it a particular number it's failing to or have you tried a few?
Let me know how you get on.
Thanks.

A particular site has a message capability, but I can not send or receive messages.

The web site Ashley Madison has a built-in messaging capability. I can not send or receive messages on this site. I tried the same thing on another person's computer and it worked. Is something blocking out this capability?

Java Plug-in 1.6.0_10 for Netscape Navigator (DLL Helper) is too old for 3.6.8, you need 1.6.0_15 or higher with the Next Generation Plugin.
http://www.java.com/en/download/index.jsp

I can not send or receive messages

I can not send or receive messages or call or receive on my FaceTime. I have full Internet connection, and my FaceTime is on in my settings. Any help would be appreciated.

Java Plug-in 1.6.0_10 for Netscape Navigator (DLL Helper) is too old for 3.6.8, you need 1.6.0_15 or higher with the Next Generation Plugin.
http://www.java.com/en/download/index.jsp

Can not send SMS text message.

Hi, I'm a BlackBerry user for 4 years now and this is the first time that I have a problem with SMS text messaging. My precious BB is a Q10.
The problem is that I can receive SMS messages but I can not answer and I can not send messages. When I tap the 'send' icon or press Enter nothing happens. My message dissapears and i can not see in the upper window, below the message that I've previously receive and I wanted to aswer for.
Also, I can compose SMS message, but when I press Enter or tap send, nothing happens. No message in the hub, or in the text messages folder.
I've rebooted the device, reloaded the OS, but didn't help.

Hi and Welcome to the Community!
With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (step 1 should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive
2) Reboot
Pre-BB10 Devices ONLY. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
BB10 Devices. Hold the top button down until the counter reaches zero. Wait for the device to be fully shut down (e.g., nothing at all displayed on the screen, no LED lights, etc.). Hold the top button until the red LED is lit. Wait through the full boot-up process. IF this fails, you can attempt the battery-pull method above, but it is normally NOT recommended unless nothing else works.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should contact your mobile service provider for formal support.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Can not send e-mails from account but can receive

I have my e-mail account with ATT Yahoo.
I received an account verification notice yesterday from ATT and I responded and they said I was verified.
However after I did that I could not send e-mails from my Imac desktop but I am receiving them.
I spend 4 and a half hours, yes 41/2 hours with both Apple Care and ATT and they could not correct the problem. Both discussions were with upper tier support personnel.
Here are some facts that make this an odd issue:
(1)
I have other e-mail boxes from ATT and they can send and receive e-mails.
(2)
MY laptop can still send and receive e-mails from the e-mail account that is only receiving with my Imac.
(3)
All the settings are exactly the same and both Apple Care and ATT checked them.
Is there anybody out there that may have an answer ?
Both Apple Care and ATT blamed each other.
My concern is that today I received another e-mail trying to verify my e-mail address for another e-mail address from ATT.
I called ATT and they did not know why, I DID NOT open it up and trashed it.
ATT has put a filter on my other e-mail accounts and hopefully that will end any problems with them.
The account that has the issue is my main account and I cannot trust leaving it and am trying to avoid having to change it.
Greg

Hi Rachel, For what it will be worth, I was like a dog with a bone about this, so I decided to give it another go. I have success on both boxes. Here is what I did, I warn you now it was a lengthy process. Before you begin download all the upgrade steps from X.5.0 to X.5.6 as single stages ( for me the combo's did not work) and have them ready to use.
1st Backup all your mail to CD/DVD not on the box. Check for any unsent mails anywhere in the box and then throw out all of the mail bits that are anywhere on the system in any folder. 2nd Install & Archive, 3rd Start up from Install DVD and check/set permissions, reboot. Enter all your ISP details to mail, see if you can send a mail to yourself. If not dump all the mail you tried and the .plists, reboot and install next update in the series, enter all details as before, try and send etc. If this fails dump again and reboot install next update etc.
I started at X.5.1 and got to vX.5.4 before I got a result in that sys asked me if this server will do, I said yes and I got mail out. The server name was different that was offered but when all was over it showed as the correct one that it should be on port 995. I must add that I had the spinning cog wheel for quite some minutes before anything happened. I continued on this way for the rest of the updates. 1x1 until v.6 was reached. That was only on the G4, I now had to do it all again on the MacPro. This one was not so co-operative in that I had to do it twice, but now it also has Mail running. It is funny though that I had to reach X.5.4 on both machines before it came right. On the G4 I was using a retail disc and on the Intel the supplied for discs.
Others on here may have a better and quicker way, but for me this did work. I am sure that there is a problem in either the mail app itself or the production of the Master DVD's.
Whatever, good luck.

"disk can not be erased" error message on Time Machine back up

I keep getting a "disk can not be erased" error message as I try to restore a recently repaired computer from Time Machine Backup. I did a Disk Verify and Permissions Verify. No help.
Help!

Use migrate rather than whatever it is you are doing.. TM has loads of limitations and I suspect you are trying to do something that is not allowed. like recover from an older to a more recent OS..
Read the info from Pondini about recovery and migrate here.
http://pondini.org/TM/Home.html
It is somewhat out of date but still useful.
No luck tell us what version OS is in the backup and what version is now on the computer.

Can not send e-mails after iOS5 upgrade

I upgraded my wifes iPhone to iOS 5. After the upgrade she can receive e-mails but can not send them. All the composed e-mails end up in her outbox. I click on the error and it says "The connection to the outgoing server "smtp.***.com" failed. Additional Outgoing Mail Servers can be configured in Setting>Mail, Contacts, Calenders."
Anyone have any suggestions?

Go to Settings => Mail,Contacts,Calenders => select the account and may have to click account again => should be viewing username and password, Scroll down and Select - Outgoing Server => Tap on Primary Server => try entering Username and Password in there even though it says optional... Also try port 25 if that doesn't work and try toggling SSL on/off if that doesn't work.

I can not send a sms message with my iphone4S ios 5.1

I can send as mms and call but I can not send sms

So you did not read about iMessage before you bought the iPad? If you did, you would know that you can only text other iOS 5 users.
http://www.apple.com/ios/features.html#imessage says:
iMessage
iPad and iPod touch join the conversation.
With iMessage, we’ve created a new messaging service for all iOS 5 users. You can send unlimited text messages via Wi-Fi or 3G from your iPad, iPhone, or iPod touch to anyone with one of those devices. iMessage is built into the Messages app, so you can send text, photos, videos, locations, and contacts. Keep everyone in the loop with group messaging. Track your messages with delivery receipts and optional read receipts, see when someone’s typing, and enjoy secure encryption for text messages. Even start a conversation on one of your iOS devices and pick up where you left off on another.

Can not send photo from messages

Can not send photo from messages

I am having the same issue. I can email, but not text message a picture. I get "message send failure". I am at home, have my wifi working, have full towers and my MMS is on and so is cellular data. I have the 4s and have had if for less than a week. I have sent pictures before. Also my daughter has my old Iphone 4 and the texts I send to her are going as regular mms texts and not Imessages???

I can not send e-mail as i get an authentication rejected message

I just purchased a new IMac and had no problem sending e-mails for a few days until after I had been asked for my server password and entered the wrong one by mistake. Shortly after that when Itry to send an e-mail I get a message "Authentication rejected, Try Later." Trying later has the same result. I checked with my server and there is no problem there. In fact I am able to send e-mails using my I-Pad so something needs to be corrected on my I-Mac. What should I do?

Hello miltonfrombellevue,
To troubleshoot the issue of not being able to send email from Mail on your iMac, please follow the directions in the article below.
OS X Mail: Troubleshooting sending and receiving email messages - Apple Support
Thanks for using the Apple Support Communities!
Cheers,
Alex H.

Outlook can not display htmldb mail message correctly

We are using some applications which constructed by HTML DB. All mail messages from HTML DB applications can not be displayed correctly in Outlook, but they are displayed very well in Netscape mail client. This issue happens in both HTML DB 1.5 and 1.6. Therefore, I am not sure this is HTML DB mail package issue or outlook issue. Have anyone experienced this issue. Any suggestions are highly appreciated. Thanks in advance!
Here is a sample in our application.
We see the mail message in Outlook:
This message generated by the HTML DB Mail Package. -----=1T02D27M75MU981T02D27M75MU98
Content-Type: text/plain; charset=utf-8
 E-Leave System Notification for SGT China.(Note: it is NOT an official leave system) <HR align=left width="70%" noShade><TABLE width="80%"><TBODY><TR><TD width="20%">Leave User :</TD><TD width="50%">[email protected]</TD></TR><TR><TD>Formal:</TD><TD>No</TD></TR><TR><TD>Type :</TD><TD>Personal </TD></TR><TR><TD>Begin Time :</TD><TD>04-MAR-05 11:30</TD></TR><TR><TD>End Time :</TD><TD>04-MAR-05 13:30</TD></TR><TR><TD>Urgent Contact :</TD><TD>13811512211 </TD></TR><TR><TD>Note :</TD><TD>Go to CCB Haidian Branch for my debit cards again :( </TD></TR></TBODY></TABLE><A
href="http://sgt.us.oracle.com/pls/htmldb/f?p=132:101">E-Leave
System</A> E-Leave System Notification for SGT China.(Note: it is NOT an official leave system) <HR align=left width="70%" noShade><TABLE width="80%"><TBODY><TR><TD width="20%">Leave User :</TD><TD width="50%">[email protected]</TD></TR><TR><TD>Formal:</TD><TD>No</TD></TR><TR><TD>Type :</TD><TD>Personal </TD></TR><TR><TD>Begin Time :</TD><TD>04-MAR-05 11:30</TD></TR><TR><TD>End Time :</TD><TD>04-MAR-05 13:30</TD></TR><TR><TD>Urgent Contact :</TD><TD>13811512211 </TD></TR><TR><TD>Note :</TD><TD>Go to CCB Haidian Branch for my debit cards again :( </TD></TR></TBODY></TABLE><A
href="http://sgt.us.oracle.com/pls/htmldb/f?p=132:101">E-Leave
System</A> 
-----=1T02D27M75MU981T02D27M75MU98--
-----=1T02D27M75MU981T02D27M75MU98--
And this is my code:
declare
l_body_html varchar2(4000);
l_subject varchar2(100);
begin
l_subject := 'eLeave Notification from ' || lower(:app_user) || '@oracle.com'; l_body_html := ' E-Leave System Notification for SGT China.(Note: it is NOT an official leave system) ' || '<HR align=left width="70%" noShade>' || '<TABLE width="80%"><TBODY><TR>' || '<TD width="20%">Leave User :</TD><TD width="50%">' || lower(:app_user) || '@oracle.com' || '</TD></TR><TR><TD>Formal:</TD><TD>' || :P3_FORMAL || '</TD></TR><TR><TD>Type :</TD><TD>' || :P3_LEAVE_TYPE || ' </TD></TR><TR><TD>Begin Time :</TD><TD>'
|| '' || :P3_BEGIN_TIME || '' ||
'</TD></TR><TR><TD>End Time :</TD><TD>' || '' || :P3_END_TIME || '' || '</TD></TR><TR><TD>Urgent Contact :</TD><TD>'
|| :P3_CONTACT ||
' </TD></TR><TR><TD>Note :</TD><TD>' || :P3_NOTE || ' </TD></TR></TBODY></TABLE><A
href="http://sgt.us.oracle.com/pls/htmldb/f?p=132:101">E-Leave
System</A> ';
HTMLDB_MAIL.SEND(
P_TO => :P3_MAIL_TO,
P_FROM => '[email protected]',
P_CC => :P3_MAIL_CC,
P_BCC => :P3_MAIL_BCC,
P_BODY => l_body_html,
P_BODY_HTML => l_body_html,
P_SUBJ => l_subject);
end;
---------------------------------------------------------------------------------------------------------------

This was not well documented, but we have improved the doc for the next relase. Essentially, you need a carriage return / line feed every 1000 characters. This is part of the SMTP spec. The package does not do this automatically for you, so try adding them yourself. You can use utl_tcp.crlf for the crlf.
Tyler

Can not send e-mail messages at times.

Similar Messages

Maybe you are looking for