Can not send mail to my pop account

My ipad1 will ot send mail in my pop account since I just upgraded today.

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Also see:
Reinstall OS X Without Erasing the Drive
OS X Yosemite- Reinstall OS X
     Note: You will need an active Internet connection. I suggest using Ethernet
                 if possible because it is three times faster than wireless.

Similar Messages

  • Can  not send mail using wifi at a motel .I can receive mail fine

    can  not send mail using wifi at a motel .I can receive mail fine

    Hi there tamarafromdarien,
    You may find the troubleshooting steps for iCloud Mail in the article below helpful.
    iCloud: Troubleshooting iCloud Mail
    If you can't send mail in OS X Mail
    If you receive this alert or a similar alert when sending a message from your iCloud email address in OS X Mail:
    “This message could not be delivered and will remain in your Outbox until it can be delivered. The reason for the failure is: An error occurred while delivering this message via the smtp server: server name.”
    In OS X Mail, choose Preferences from the Mail menu.
    Click Accounts in the Preferences window.
    Select your iCloud account from the list of accounts.
    Click the Account Information tab.
    Choose your iCloud account from the Outgoing Mail Server (SMTP) pop-up menu. Example: “Derrick Parker (iCloud)”.
    Note: The Outgoing Mail Server (SMTP) menu also includes an Edit SMTP Server List command. If you choose this command, be aware that the iCloud SMTP server won't be among the servers that can be edited. This is normal.
    If you're attaching a large file
    Message attachments can't exceed the maximum size allowed by your email service provider or the recipient's email service provider. The maximum size varies by service provider. Try compressing the filebefore sending it, or send your message without the attachment to verify that there are no issues with sending.
    -Griff W.  

  • Can Not Send Mail- what's going on?

    Can download mail but can not send mail. With parallels on and xp pro I can easily set up outlook to send and receive mail. But no! The great Apple which is supposed to be easy can not send an email with the same settings. So, back to Windows to do what should be easy on a mac. I think that perhaps the new Safari or something messed this up.

    If you'd like to approach the problem as something you don't understand, and also something that can be fixed, then you'll probably be able to set up your email account.
    You say you have emails in the Outbox. I'd move them to another folder you create or delete them. In past experience, emails contain header information that includes mail server information, and sometimes they will never send (especially with Outlook Express), even if you get the account to work. You can try sending them again, once you get the account working.
    Next, you need to make sure that you are sending the emails from a machine that is connected directly to RoadRunner's network. They may not work as a relay if you connect from another ISP. It's a port 25 problem that is common these days.
    Now for the problem. If you are receiving emails properly, then the POP server information is correct. The mail program is designed to set up to some default settings that work with many servers, and during the process it will try to validate the settings you supply. This can take awhile, and can come up with a failure, due to a wrong assumption. Your email program is assuming that the email server requires authentication. This has been a problem with the RoadRunner system for years. Apparently, some windows email clients do not work the same way, go figure. They seem to have their own problems.
    Many people have reported successfully setting up an account with RoadRunner, after first making sure they have the right SMTP server address. It can be different for different parts of the country.
    After the email account is set up, and is failing to work, people go into the Mail/Preferences/Accounts/Account Information/Outgoing Mail SMTP Server - Click on the dropdown button - Choose "Edit Server List" - Advanced - Change Authentication to "None"
    Here is a related thread with stories of success with RoadRunner: http://discussions.apple.com/thread.jspa?messageID=9128382&
    After the changes, I'd quit and relaunch Mail. Not required, but good troubleshooting practice. Since there are no emails in the Outgoing Mailbox, create a short message and try to send.
    I have different problems with different companies for both Mac's and Windows machines. The ISP always blames the OS, especially Leopard and Vista (since they work with more intelligent/advanced (maybe) settings. Besides the Authentication issue that pops up with some servers, there's also the occasional SSL variation and/or login name (sometimes it's the first part of the email address before the @ and sometimes it's the entire email address). Some ISP's block port 25, some do not. All of these settings can vary with each ISP, and can change on a whim (especially the port 25 problem), with working accounts going dark because of security changes at the ISP. Telephone Tech support at the ISP is often unaware of any changes in their system because they are not in the IT loop at the company and some will just go into "idiot" mode when you mention Macintosh. The first level support people are using a script on the phone, and their job is to make you go away...
    I'm afraid the Great Apple, as you referred to them, is not able or hasn't focused on the ability to automatically set up accounts with every ISP. They appear to have made some assumptions that work with most servers. Who know's, next month the settings or assumptions may work, or Apple may update their setup script to make allowances specific to Time Warner, but since this has been a problem for over 3 years, I wouldn't hold my breath.
    Google: leopard mail roadrunner problem = about 96,000 hits of all sorts.
    Google: vista email roadrunner problem = about 1,410,000 hits of all sorts.
    Google: windows xp email roadrunner problem = 243,000 hits of all sorts.
    Looks like Apple's getting it's market share of problems with RoadRunner and Time Warner
    My own local DSL is from a company named Centurytel. They are on their 4th email server setup in the last 5 years, and have finally contracted it out to a 3rd party company to administer. I just tell all of my clients to get a Gmail account and get over it. Let's see, a multi-billion dollar company who's reputation and income is based on service... free with 7GB storage, Webmail, POP and IMAP access, specific support for all major mail programs including Apple Mail, and alternate ports that get around ISP blocking. It seems that once you enable POP or Imap access in the webmail settings menu, Apple Mail and Vista seem to know the proper settings to use.
    I'd setup the free Gmail account that will work with any ISP you use, before you get really attached to an email account with an ISP that could change as often as competitor's marketing allows. Also, my iPhone supports Gmail out of the box

  • I can not send mail when at school. Please help

    I can not send mail when at school. Please help

    What is the email provider? If it is from your home Internet service provider, they usually block sending when not on their network. If this is the case, see if you can log into the smtp server with username and password. If they allow that, you can enter that in the email account settings.

  • TS3899 In my iPad 2 with IO6 today I can not send emails from my gmail account, they go to the outbox directly...why? How can i solve this problem? ..I restarted the IPad but the problem was not solved. Please help.

    In my iPad 2 with IO6 today I can not send emails from my gmail account, they go to the outbox directly...why? How can i solve this problem? ..I restarted the IPad but the problem was not solved. Please help.

    Greetings,
    Questions:
    1. What version of the Mac OS are you running (Apple > About this Mac)?
    2. What version of the iOS are you running (Settings > About)?
    3. Do you use MobileMe/ iCloud or another server based sync solution like Google or Yahoo?
    4. Do other changes to synced information like Address Book content sync successfully back and forth?
    Based on your description it sounds like you have a 1 way sync issue.  Events sync fine between the iOS devices and fine from the computer to the iOS devices but not from the iOS devices to the computer.
    Try:
    Backup your computer and iOS devices before doing anything else:
    http://support.apple.com/kb/HT1427
    http://support.apple.com/kb/ht1766
    Ensure all the devices in use are fully up to date: Apple > Software Update / Settings > General > Software Update
    Make separate backups of critical data:
    Backup your computer Addressbook: http://docs.info.apple.com/article.html?path=AddressBook/4.0/en/ad961.html
    Backup your computer iCal: http://support.apple.com/kb/HT2966
    Reset syncing on your Mac: http://support.apple.com/kb/TS1627
    Reply back if that does not resolve your issue.
    Hope that helps.

  • SendMail: can not send mail with body more than 1000 caracters

    Hi,
    I can not send mail with a body wich is more than 1000 caracters.
    FUNCTION SendMail(SMTPServerName IN STRING,                     
                        Sender IN STRING,                     
                        Recipient IN STRING,                     
                        CcRecipient IN STRING,                     
                        BccRecipient IN STRING,                     
                        Subject IN STRING,                     
                        Body IN STRING,                     
                        ErrorMessage OUT STRING,                     
                        Attachments IN ATTACHMENTS_LIST) RETURN NUMBER IS      
                        AttachmentList VARCHAR2(4000) := '';      
                        AttachmentTypeList VARCHAR2(2000) := '';   
                          BEGIN       ParseAttachment(Attachments,                      
                                                      AttachmentList);      
                                      RETURN JSendMail(SMTPServerName,
                                                       Sender,                       
                                                       Recipient,                       
                                                       CcRecipient,                       
                                                       BccRecipient,                       
                                                       Subject,                       
                                                       Body,                       
                                                       ErrorMessage,                       
                                                       AttachmentList); 

    Hi,
    I can not send mail with a body wich is more than 1000 caracters.
    FUNCTION SendMail(SMTPServerName IN STRING,                     
                        Sender IN STRING,                     
                        Recipient IN STRING,                     
                        CcRecipient IN STRING,                     
                        BccRecipient IN STRING,                     
                        Subject IN STRING,                     
                        Body IN STRING,                     
                        ErrorMessage OUT STRING,                     
                        Attachments IN ATTACHMENTS_LIST) RETURN NUMBER IS      
                        AttachmentList VARCHAR2(4000) := '';      
                        AttachmentTypeList VARCHAR2(2000) := '';   
                          BEGIN       ParseAttachment(Attachments,                      
                                                      AttachmentList);      
                                      RETURN JSendMail(SMTPServerName,
                                                       Sender,                       
                                                       Recipient,                       
                                                       CcRecipient,                       
                                                       BccRecipient,                       
                                                       Subject,                       
                                                       Body,                       
                                                       ErrorMessage,                       
                                                       AttachmentList); 

  • HT2693 can not send mail using mac mail

    can not send mail using mac mail

    Google for:
    setup XX email on iphone
    where XX is your email provider

  • Can recieve mail however can not send mail

    Hello, i am hoping someone can help me.
    i am able to recieve mail from my mail app using outlook however i can not send mail. it is saying my connection has failed. does anyone know what i can do to fix that.
    thank you so much

    Hi,
    Are you connected to a strong Wi-fi signal?  Try resetting your iPod:  Press/hold the home and sleep/wake buttons until the Apple logo appears. 
    Hope this helps! 
    ---likeabird---

  • Can not send mail with verizon email

    Please help me! I can not send mail useing my Verizon email. I can recieve but not send. I am not that savy so please help me!

    your outgoing mail should be:
    SMTP mail server:  outgoing.verizon.net
    you should have a password set
    SSL should be off
    authentication should be password
    server port 25

  • ALERT---ALERT since upgrading to last version 1/2 hour ago I can NOT send mail-ALERT ---

    HI,
    I upgraded to the latest version half an hour ago. My TB is in French. Since then I can NOT send mail. A window appears with the mention " adjunction of // ajonction de" and the blue bar keeps going up to 10 minute. After 10 min i decided to abort, restart TB, make another testmail but same problem.
    Please act quickly

    Hello,
    Certain Thunderbird problems can be solved by peforming a ''Clean Reinstall''. This means you remove Thunderbird's Program Files then reinstall Thunderbird. Please follow these steps:
    #Download the latest version of Thunderbird from http://www.mozilla.org/en-US/thunderbird/ and save the setup file to your computer.
    #After the download is complete, close all Thunderbird windows (Click Exit/Quit from the menu button on the right).
    #*'''Windows:'''
    #** C:\Program Files\Mozilla Thunderbird\
    #** C:\Program Files (x86)\Mozilla Thunderbird\
    #*'''Mac:''' Delete Thunderbird from the Applications folder.
    #*'''Linux:''' If you installed Thunderbird with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Thunderbird on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/en-US/thunderbird/ Thunderbird Download Page], simply remove the folder ''thunderbird'' in your home directory.
    #Now, go ahead and reinstall Thunderbird:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to open Thunderbird after clicking the Finish button.
    <b>WARNING:</b> Do not run Thunderbird's uninstaller or use a third party remover as part of this process, because that could permanently delete your Thunderbird data, including but not limited to, extensions,emails, personal settings and saved passwords. <u>These cannot be recovered unless they have been backed up to an external device!</u>
    Please report back to see if this helped you!
    Thank you.

  • I can t send mails with my telus account

    I can<t send mails with my telus account but I can received it. Does anyone of you knows how to fix it

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
     Cheers, Tom

  • N8 Mail for Exchange (can not send mails)

    Hi guys,
    I just got my new Nokia N8. I already setup Mail for Exchange via IMAP to sync the mails, contacts and the calendar of my private mailbox.
    Everything runs alright. But I can not send mails via Mail for Exchange. If I push on "New Mail" the program say the command can not be executed and breaks down.
    Does someone know how to fix that problem?
     Thanks from Liechtenstein.
    Phil

    Hi,
    I also had problems with unable to send emails.
    I was getting error messages in the Mail for Exchange (MfE) log files such as
    Setting DISK FULL status to false
    Error occurred during sending mail. Setting status to waiting for reconnect
    HTTP failure while sending messages.
    I figured out a work around. The problem seemed to be with the certificate.
    I ended up deleting the certificate and then only selecting "Accept this time only" which made everything work.
    I am using a Nokia 5800.
    To delete a certificate goto
    Setting > Phone > Phone mgmt > Security > Certificate Management > Trusted site certificates
    find the offending certificate and delete it.
    The next time I tried to synchronize my emails with Mail for Exchange, I was asked to select whether to accept the certificate... press the option button.
    Then select "accept this time only".
    After doing that, the emails in the outbox were sent properly.
    I have to figure out how to get this to work permanently, but for the moment it was a quick fix.
    [I hope this helps. I tried to be as descriptive as possible and write with correct spelling so that search engines will collect it.]

  • Can not send mail with google account

    I have the Ipad in the 3G model but I am unable to send mail using my google account that is linked to it. If I was to go on the internet on it and send things through google it would let me but I need to be able to send attchments off the ipad so need to be able to use the mail app. I keep getting a message saying Cannont send mail the sender address was invalid. Please help

    I am having alot of trouble with my ipad(3G) and mail using gmail push set up using exchange server. It seems like every couple days it will not send mail and says unknown recepient or invalid. Then the next day it will work. I've deleted and set up the email account a few times. Same thing happens. If I just use a normal non push gmail account that works fine, but I'd like the gmail push to work. I have a strong wireless signal when this happens.
    Any ideas?
    thx
    lenn

  • For some reason yesterday and today I can not send mail using the icloud website and help?

    From some reason I can not send emails using the icloud website.  Not sure why any help

    Hi there tamarafromdarien,
    You may find the troubleshooting steps for iCloud Mail in the article below helpful.
    iCloud: Troubleshooting iCloud Mail
    If you can't send mail in OS X Mail
    If you receive this alert or a similar alert when sending a message from your iCloud email address in OS X Mail:
    “This message could not be delivered and will remain in your Outbox until it can be delivered. The reason for the failure is: An error occurred while delivering this message via the smtp server: server name.”
    In OS X Mail, choose Preferences from the Mail menu.
    Click Accounts in the Preferences window.
    Select your iCloud account from the list of accounts.
    Click the Account Information tab.
    Choose your iCloud account from the Outgoing Mail Server (SMTP) pop-up menu. Example: “Derrick Parker (iCloud)”.
    Note: The Outgoing Mail Server (SMTP) menu also includes an Edit SMTP Server List command. If you choose this command, be aware that the iCloud SMTP server won't be among the servers that can be edited. This is normal.
    If you're attaching a large file
    Message attachments can't exceed the maximum size allowed by your email service provider or the recipient's email service provider. The maximum size varies by service provider. Try compressing the filebefore sending it, or send your message without the attachment to verify that there are no issues with sending.
    -Griff W.  

  • Can not send mail over Edge

    My boss has an original iPhone and I am constantly having problems keeping his e-mail functioning properly.
    The latest issue is he can not send e-mail over the Edge network. I visited the AT&T support page, and they say to contact Apple for support.
    Here is the message I get when attempting to send mail:
    "Cannot send mail. One of the recipient addresses was invalid."
    It is a POP account that works fine when sending mail over a wi-fi network. I have our smtp settings for our pop mail entered in his account as the main smtp server. There is also an additional server named AT&T SMTP Server.
    When trying to send mail over the Edge network, I turn off the wi-fi access to force it to use the AT&T smtp server (cwmx.com) and every time I get the above error message.
    I have another boss here with an identical iPhone and email settings that has no issues. The problem phone was brought to the local Apple Store and had the sim chip replaced, other than that they have no idea what is wrong.

    My boss has an original iPhone and I am constantly having problems keeping his e-mail functioning properly.
    The latest issue is he can not send e-mail over the Edge network. I visited the AT&T support page, and they say to contact Apple for support.
    Here is the message I get when attempting to send mail:
    "Cannot send mail. One of the recipient addresses was invalid."
    It is a POP account that works fine when sending mail over a wi-fi network. I have our smtp settings for our pop mail entered in his account as the main smtp server. There is also an additional server named AT&T SMTP Server.
    When trying to send mail over the Edge network, I turn off the wi-fi access to force it to use the AT&T smtp server (cwmx.com) and every time I get the above error message.
    I have another boss here with an identical iPhone and email settings that has no issues. The problem phone was brought to the local Apple Store and had the sim chip replaced, other than that they have no idea what is wrong.

Maybe you are looking for

  • Adding Image to JTextArea

    Hello All, I need to add an Image to a JTextArea. Any ideas plz. best wishes Issac

  • Schema information was not read from MDS Repository

    Hi All, When running the SCA Components and reading the schemas information, we are facing issues, like.... " Schema information was not read from MDS Repository " and the instances are getting failed. this is not happending that regularly, but when

  • Photoshop Elements 12 License agreement

    I'm trying to decide wether to get the App Store or «full» version of Photoshop Elements. With the App Store version I can install on all my macs, which is nice. Do any of you know if I can do the same with the full version? Regards G. Helland

  • CVP Server NIC is down automatically in peak time

    Hi All, We have IPCC Setup with IPCC 7.5 and CVP 7.0. We have two CVP physical servers (co-resident with Call Server, VXML Server, Media server) And call flows work via H323 protocol (not using SIP). Load balanced via CSS, Call Routing VIA gatekeeper

  • IPad Mini Stays Storage Almost Full

    My iPad mini keeps ghost filling my storage. In restarting it, my free space would come back. After it would continually do this, I restored my ipad to factory settings and reinstalled my apps. The problem has persisted. Anyone know why it would do t