Can not set time and date fax setting on officejet 4620

Can not set the time and date on Officejet 4620 when faxing.  There are no setup options available.  The log always shows "Jan 00  00:00 AM".

The time and date setting should be under the setup tools or fax setting in the printer control panel.1. Click the wrench icon on the control panel of the printer.
2. Scroll to Tools.
3. Scroll to Time and date.

Similar Messages

  • Can't get past the time and date intial set up screen can anyone please help?

    We purchased Apple TV last night, hooked everything up according to the directions, until we get to the Setting Time and Date Screen, which Apple TV- for more than 12 hours now, has been trying to establish.  We've set the time zone both manually and automatically, I have emailed and tweeted Apple Support but no help so far, this is my last plea before I return it.
    Any help would be appreciated.
    Thanks

    Welcome to the Apple Community.
    Assuming this is not the first time you have used your Apple TV
    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
    Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
    If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
    If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

  • HT1600 I have an apple tv  about two years old. Bought for a present and they never took it. I tried to hook it up cut it get stuck on setting time and date. Any help?

    I have an apple tv  about two years old. Bought for a present and they never took it. I tried to hook it up cut it get stuck on setting time and date. Any help?

    If you can view the main home screen, try selecting "settings" on the far right, then choose recent at the bottom. If not, try just unplugging power for a few minutes, then plug in and try again. Keep in mind you'll need a wireless connection and there may be several updates. Hope this helps-

  • KDE: Setting time and date automatically

    I've never been able to set the time and date automatically in KDE time settings. When I check the "Set time and date automatically" and authenticate myself, I always get the error message "Unable to contact time server: .". I'm wondering whether it's an upstream bug or I'm missing some required package? Does it work for you?

    matt101 wrote:I don't get it i have installed ntpd using pacman -S ntp . And then after it installed I restarted my computer and i still can't change the time to London and am still getting the "Unable to contact time server" error. Am i misinterpreting this or what? Could somone please explain to me in simple terms how to make the KDE clock show London time?
    Have you set ntp correctly?
    Also go to http://www.pool.ntp.org/en/use.html you'll have all the answers there.
    in short try this:
    ntpq -p
    If nothing happens you did something wrong, if it does, then it already works just remove ntpd or openntpd from daemon array.

  • I'm in the activation process for setting time and date but been stuck in that screen for a while please help

    just installed my Apple TV and it's been in the activation screen to set time and date for a while .
    not sure what the issue is

    It's not properly connected to the network
    Make sure location is set correctly
    DNS should be on auto (settings - general - network)
    If on wifi try Ethernet
    Check that router has port 123 open (refer to manual if unsure)

  • Unable to set time and date

    im trying to set up my apple tv just after ive updated to the latest version, but it wont pass the setting time and date screen
    what can i do?
    HELP!

    Hello john.george,
    You may need to verify that TCP port 123 is open and available for use on your router.
    TCP port 123 is used to communicate with a network time server.
    Apple TV: TCP and UDP ports and protocols used
    http://support.apple.com/kb/HT2463
    Cheers,
    Allen

  • Constantly being asked to set time and date (Apple TV 2nd Gen)

    I am constantly being asked to set time and date on my Apple TV 2nd Gen. Has anyone had this problem? I get the screen with this message about 10-15mins after I connect to my home network. I connect, everything works fine, but then streamin, browsing stop and this screen appears. Any help would be appreciated.
    Thanks!!

    what if you try something simple as to restart your phone and check again. 
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • How long should setting time and dates take?

    I have hooked up my apple tv, and it is still "setting time and date" after 2 hours.
    How long should it take?

    You have a network problme.  ATV is not able to connect to the internet, so it is not able to set it's date and time.

  • Set time and date not working

    Set up time and date is not working, since I changed settings from Saudi Arabia to USA...want time and date from USA?!

    You need to set your location to where you are, not where you might like to be.

  • Why my atv can't set time and date after restoring it using itunes ?

    when my atv restarting after  I restored it using iTunes, it can't set the time and date.
    the atv is connected to the net by wi - fi.
    when I try to sign in using my apple id, I get a massage that the password is incorrect.
    I have apple tv with ios 7.

    The network and signal test on device won't give the full picture, for that you need a network report. Go to istumbler, netstumbler or similar, that will show true signal strength as well as any nose detected. You can also try Ethernet to help rule out WiFi issues.

  • Setting time and date on Apple tv

    After I restored my Apple TV I can't access it, because it stuck on " setting date and time". I tried to set the time and date
    manually but it wont work. When I type my Apple ID to test the network or for home sharing it says wrong I'd or password. I have restarted my Apple TV but
    no luck

    Setting date and time

  • Apple stays on setting time and date after restore

    apple tv stays on loading setting time and date

    It is having trouble connecting to the network. Make sure location is set correctly. DNS should be on automatic (settings - general - network). If on wifi try ethernet.

  • Time and date are set incorrectly on the routers and switches

    I've just noticed that the date and time on all my Cat4006's, Cat3548's and Cat6000 were grossly incorrect. I was wondering if this would contribute to problems I am having on the network. Does the switches/routers check the timestamp on the packets it's passing and/or append or add thereto?

    Date and time set on routers and swithces will not affect your user data traffic.
    Keeping Date and time synchronized across network devies will help if you are troubleshooting your network.
    If you need to keep date and time synchronized across all the network devices, use NTP (Network Time Protocol)

  • HT4743 time and date wont set

    time not setting

    I have gone through the Manuel and I have been through this whole website. Nothing regarding time not working and how to fix it. I have attempted to I set the time several times and it doesn't work I have been in Preferences and tried to check the time zone/daylight savings time and several other things that may affect it to no avail. I have like I said tried a hard reset deleting everything and then hotsyncing again. I am at a loss. Is there something I should download? Maybe try a hard reset again? I am not a computer wiz this is my first palm pilot so I am lost.
    Post relates to: Palm Z22

  • I can not transfer files and data from macbook pro to my external hard drive, i can not transfer files and data from macbook pro to my external hard drive , so what should i do ?

    i have an external hard disk but whenever i tried to transfer any file or data from macbook to this ext.disk its failed before that i used to have another hard drive with same problem ,then i thought may  be this hard drive is not support mac then i bought a new one which supports mac but still i have same problem what should i do ?

    Ok.
    Go into Disk Utility, and make sure you select your external hard drive.
    There should be 4 tabs, one being erase. I have taken a screenshot to show you what it should be set to (obviously name it what you like), and set the format to Mac OSX Extended (Journaled) as per the example below & after double checking your in the right drive, you can hit erase. And you're done! *hopefully*

Maybe you are looking for