Can not Sorting by Key Figure with Analyzer and Excel 2007

Hello experts,
We have recently changed to Office 2007, and the funcionality of Sorting by a Key Figure with BEx Analyzer is desactivated.
We have applied the patch 10 for BEx BI 7.10.
Has anybody had the same problem?
Thanks in advanced.

Hi Patricia,
Have you got two structures in your query?
Please take a look at the following notes:
1378796 - Disabled Sorting when there is one struct. in the drilldown
1332267 - BExAnalyzer: changes in cell properties dialog / sorting
these should explain why the sort feature is no longer available in certain scenarios.
many thanks
Orla.

Similar Messages

Password prompt Error with Bex and Excel 2007

Hi Guru's,
We have a problem with end users that have the Bex add-in loaded in Excel 2007 when they are using a different 3rd party add-in. The problem is when they close Excel, they get password prompted for a password protected VB project in the workbook.
I found a MSFT article that sounds exactly like the problem I'm seeing. Link is below.
[http://support.microsoft.com/kb/280454]
Has anyone experienced this problem?
Thanks
Brian Winterlich

Hi Brian:
Take a look at SAP Note 1397278 - "BPC: Pop-up window prompting for a password to unprotect the sheet in Journal template with Office 2007 SP2".
Regards,
Francisco Milá

Key Figures With Hide can be shown showing wrong values when displayed in a query

Hi Experts,
I have a qiery with two structures in the column(cell Definition) three key figures are displayed and the rest are all hide can be displayed. However whenever i display one of the hidden key figures along with one displayed key figures it initially shoes incorrect values. Once i add another key figure (which has status always show) the hidden jey figure value gets corrected. Is it a problem with the structure? Kindly assist.For example when i display the actuals(always show) and actuals rate(hide can be shown) the values for actuals rate are wrong , however when i add the plan rate(always ahow) the values for actual rate gets corrected. Screenshots for structures below.

Hi Sayanto,
For this I would recommend you to check the Key figure definition in all 3 situations.
1. original display
2. display of hidden KF
3. Display of existing KF
I suspect that cell references may have some effect on the calculation as you are adding the hidden KF in analyzer directly. You can prove this only by checking Key figure definition.
Please let me know if you are facing any issue in getting the Key figure definition itself.
Also, as Cornelia suggested check if you have any constant selection applied to any of your KFs.
Hope this helps.
-Swati.

Currency Translation for Key Figures with Value More Than One Currency

Hi...
I have query which display key figure GL Account Balance. The currency that used for this key figure is USD and IDR. How we want display value based on selection screen? So if we input currency USD, all value that use currency IDR translated to USD and all value that use currency USD not changed. Otherwise if we input IDR, all value that use currency USD translated to IDR and all value that use currency IDR not changed.
How we do this in query designer? Thank you.
I have use currency translation :
1. (Right Click Key Figures >> Properties >> Currency Conversion Key)
2. Target Currency Using Variables Entry
but seems the result is not correct. Can anyone help me ?
Regards,
Satria

Hi all,
Thanks for your help, but still I have problem. I have create one currency conversion type, ZXXX. This currency conversion type is using exchange rate type = "M",source curr from Data Rec, sel of targ currency with translation,
and fixed time ref = "Current Date".
Problem:
1. With this setting, i create currency translation in BEx, but the result is not same, it's like the exchange rate not using the same setting with data in ECC (I compare data with transaction fs10N). Is my setting for exchange rate not correct?
2. When I try to display GL Account Balance --> Calculated Key Figure (Total Debet - Total Credit) for period 0, the translation not working. Example if the value is IDR 1234 then the value in USD still USD 1234. Why this happen?
Thank you
Regards,
Satria

I can select a rating and a color label for my images, but I can not sort by rating and color label.

I can select a rating and a color label for my images, but I can not sort by rating and color label. when I click on the filter drop down, color label is not one of the options. how do I get both ratings and color lables as an option to sort with.

You can Filter (not sort) on both color label and rating if you want, open the Filter Bar with the backslash key, then click on Attribute, and then select the stars and color label of interest. If you really meant "sort" and not filter, then you can't do this in Lightroom.

No values when using key figure with constant selection?

Hi experts,
I have built a Webi on top of a universe that is sitting on top of a Bex query.
In my Bex query I have a bunch of key figures defined that are restricted on time and category.
This Webi works fine.
Then I added an additional key figure that required a constant selection on time and on category.
When I first added this to my Webi report it was fine. But once I refreshed my report showed no values.
The report still seems to know that it is meant to retrieve values because it is bringing back the correct records - just no values. (ie I am showing time in my columns and it's showing the correct periods that are meant to have data)
I refreshed a number of times and sometimes it would bring "#TOREFRESH" in some cells but once I refreshed again the cells are blank. Sometimes it would even show me a value in a couple of cells and others would show the "#TOREFRESH"
I went back to my Bex query and removed the key figure with constant selection and the report is working again?
Has anyone experienced something similar? Is there a way to make this work?
Thank you!
Sabine

#TOREFRESH error message appears for smart measures (measure object with aggregation type Database Delegated) when the context for the measure is changed. Refreshing data will solve the issue. Database delegated measures are used for some non-additive aggregation which webi is not able to handle properly. If you are not using such aggregation, then tou can change the aggregation type to something other than database delegated to avoid #TOREFRESH.

"Can not get a key" error when assigning the OAuthTokenIssuer certificate

I am migrating from Lync Server 2010 to 2013. When deploying the 2013 server, it fails when assigning the OAuthTokenIssuer certificate. With the KeyException error below.
I've tried "re-keying" the cert and confirmed that the key is exportable. Does anyone have any insight on how to resolve this?
=============
<?xml version="1.0" encoding="UTF-8"?>
-<CsMgmtLog Name="Set-CSCertificate">
<Info Time="2014-04-21 19:00:53Z" Title="Connection">Data Source=servername.domain.com;Initial Catalog=xds;Integrated Security=True</Info>
-<Action Name="Set Certificate" Time="2014-04-21 19:00:53Z">
-<Exception Time="2014-04-21 19:00:54Z" Message="Can not get a key." Type="KeyException">
<StackTrace Time="2014-04-21 19:00:54Z"> at Microsoft.Incubation.Crypto.GroupKeys.DKMBase.GetCurrentKeyAndUpdate(KeyPolicy& keyPolicy) at Microsoft.Incubation.Crypto.GroupKeys.DKMBase.Protect(MemoryStream plaintext) at Microsoft.Rtc.Management.Internal.KeyManagement.GroupKeyWrapper.Encode(Byte[]
inBytes) at Microsoft.Rtc.Management.Deployment.Core.Certificate.SetCMSCertificate(IScopeAnchor scope, X509Certificate2 foundCert, X509Certificate2Collection certs, Nullable`1 effectiveTime, Boolean isRoll) at Microsoft.Rtc.Management.Deployment.Core.Certificate.SetCMSCertificate(IScopeAnchor
scope, String thumbprint, Nullable`1 effectiveTime, Boolean isRoll) at Microsoft.Rtc.Management.Deployment.Tasks.SetCertificateTask.Action() at Microsoft.Rtc.Management.Internal.Utilities.LogWriter.InvokeAndLog(Action action)</StackTrace>
</Exception>
<Complete Time="2014-04-21 19:00:54Z"/>
</Action>
<Error Time="2014-04-21 19:00:54Z" Title="Error">An error occurred: "Microsoft.Incubation.Crypto.GroupKeys.KeyException" "Can not get a key."</Error>
</CsMgmtLog>
=============
Regards,
Yai

Please try to assign the certificate with Lync Server Management Shell.
Run the following command:
Set-CSCertificate -Identity Global -Type OAuthTokenIssuer –Thumbprint <string>.
Check if you can assign default certificate to Lync Front End Server.
Check the Root Certificate Authority certificate is not expired.
Lisa Zheng
TechNet Community Support

How can we see restricted key figures in Portal

Hello,
We are using 0ANALYSIS_PATTERM template, when we use the "new analysis" and from the drop down at the top (view, query, infoprovider) when we choose the infoprovider as a cube for example (0PU_C02) we can see pretty much like a web version of query designer i guess, we can see all the objects. But is there any way the end user can see the restrcited key figures that are created in the query designer by BW developer, so that they can drag and drop their objects and create a report.
It would be great to have this function.
Thanks,
Kiran

Currently, this is not available. You could have a query that has all RKF as a starting point to achieve this. If you think this would be good to have by default, please log a development request on the OSS Messaging System.

Combine two reports in query designer using key figure with sap exit

Hi experts,
i want to combine two reports in query designer using key figure with sap exit
in the report 1 key figure calculation based on the open on key date(0P_DATE_OPEN)
to calculate due and not due in two columns
in report 2 key figure calculate in the time zones using given in variable Grid Width (0DPM_BV0) like due in 1 to 30 days, 31 to 60 days...the due amount based on the open on key date(0P_DATE_OPEN)
to calculate in 1-30, 31-60, 61-90, 91-120, 121-150 and >150 days in 6 columns
now i have requirement like this
not due, 1-30, 31-60, >60, due,1-30, 31-60, >60 in 8 columns
or
not due, due, 1-30, 31-60, 61-90, 91-120, 121-150 and >150 in 8 col
thank you

Hi Dirk,
you perhaps know my requirement,
for the management to make used in one report,
we have in reporting finacials Ehp3.
Vendor Due Date Analysis - which show due, not due
Vendor Overdue Analysis - show only due and analysis in time grid frame
i want to combine in one report that show NOT DUE, DUE, DUE time frames in grid.
krish...

Add new key figure with characteristics in report painter

Hi expert,
I am create a new report painter in GRR2 under report group 8A2 (EC-PCA: Standard Reports) and i would like to create a report show on G/L amount with segment.
When i click on first column to assign "key figure with characteristics" i am not able to find characteristics "segment".
Please kindly advice how to create in new characteristics in report painter?
Thanks.
p/s : profit center number is same with segment number
regards,
ng chong chuan

Hi,
"segment" is not a characteristic of classical profit-center accounting (libraries 8A*). Its a New GL characteristic, thus create a report painter report for New GL library.
best regards, Christian

Key figure with pre-calculated aggregation

Hello,
I have to model a key figure with a pre-calculated aggregation, that is, soruce flat files contain explicit values for months, quarters, halfyears and years. The key figure is a percentage (service quality) and the corresponding company department provides me with results for all aggregation levels.
I think that this case can be modeled with one InfoCube for each aggregation level and a Multicube but I have to create a high number of InfoCubes (aprox. 180).
I can get the formula that department uses, but it's possible on BW to change standard aggregation (SUM, MAX, MIN)?
Thanks in advance and regards,
Alberto Garcia.

Hi Alberto,
One of the ways of doing it could be -
add another field (char) to your cube called at "value Type" & assign different values to it depending upon the time value.
say Monthly - value type 1
Querter - value type 2
& so on ...
keep filling the same key figure.
at the time of reporting restrict your key figure accordingly with the value type. ( say need only montly key figure value restrict value type to "1")
hope it helps.
VC

Sort By Key Figure?

I am using BEx Query Designer to build a query and I have two key figures. I would like to sort the results by one the ascending values of one of my key figures. The output seems to sort it by the characteristics by default. Is there a way to have the query sorted by key figure values instead?

The default sort option by characteristic only. I don't think there is an option to sort by key figure.
However, you can use conditions to display Top N, Botton N, Top %, Bottom % records. For instance you want to show top 10 customer by Sales Amount key figure, crate a condition on sales amount key figure and select the operator TOP N and give the value 10. It will show top 10 customers by sales amount in descending order. I hope this helps.
Edited by: sapwings on Feb 24, 2011 4:53 PM

Sorting a Key Figure by default in a query

Hi,
I'm trying to set up a query with a key figure that is sorted in descending order by default everytime. I tried creating the following condition:
Key Figure - Sales Volume
Operator - Top %
Values - 100
This sorts the key figure in descending order to a point. When I add a characteristic to the report (for example, sold to), the sorting is no longer active. I would like this key figure to remain sorted in descending order regardless of the any manipulation to the report. But, I'd still like the user to have the ability to change the sorting if they want to sort by another key figure (ascending or descending)
I'm using the BI 7.0 Query Designer.
Thanks!!

Check this:
Sort Key Figures and Maximum query result
Organising key figures in BEx Query Designer
ordering display in a KF
Hope it helps..

I can not use mac book air with samsung galaxy 3 to transfer files. i download the OS X mountain line version the latest one...how can i introduce them each other?

i can not use mac book air with samsung galaxy 3 to transfer files. i download the OS X 10.8.1 mountain line version the latest one...how can i introduce them each other?

Thanks how do I get the latest version then? online its asking me to submit address details and all sort and I'm not keen to do that, I'm working away from the city I bought it in and there is no Apple Store near me yet?

My mac is infected with viruses, Safari can not normally search for constantly appear commercials and some unknown site. What to do? antivirus free program that you recommend?

my mac is infected with viruses, Safari can not normally search for constantly appear commercials and some unknown site. What to do? antivirus free program that you recommend?

You may have installed the "VSearch" trojan, perhaps under a different name. Remove it as follows.
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Reset the home page and default search engine in all the browsers, if it was changed.
Step 2
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
This trojan is distributed on illegal websites that traffic in pirated content. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that this Internet criminal has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Can not Sorting by Key Figure with Analyzer and Excel 2007

Similar Messages

Maybe you are looking for