Can not start opmn after change OracleAS Metadata Repository Listener Port

Hello,
I installed OracleAS metadata Repository Listener Port, And i change the port of the listener, then flowwoing the manual was needed start teh OID component
But I won´t start

Roberto,
The tail of OIDCTL.log is:
09/02/23 19:14:44 Start process
oidctl:oidmon is not running on u47.un.mx, waiting for a few seconds...
09/02/23 19:58:44 Start process
oidctl:oidmon is not running on u47.un.mx, waiting for a few seconds...
09/03/02 16:02:43 Start process
09/03/04 15:57:21 Start process
And the tail for oidmon.log:
2009/03/02:16:02:43 * oidmon_u47pacrm01.unitec.mx:0 *
Updating Process Table...
2009/03/04:14:52:11 * Killed process pid = 1345
2009/03/04:14:52:11 * Monitor Process id = 1345 Terminated
2009/03/04:14:52:11 * Sent SIGTERM to process id = 1374
2009/03/04:14:52:11 * ODISRV Instance 1 deleted from registry
2009/03/04:14:52:11 * Updating Process Table...
2009/03/04:14:52:11 * Sent SIGTERM to process id = 1370
2009/03/04:14:52:11 * OIDLDAPD Instance 1 deleted from registry
2009/03/04:14:52:11 * Updating Process Table...
2009/03/04:15:57:21 * Connecting to database, connect string is te04as
2009/03/04:15:57:21 * [gsdsiConnect] ORA-0,
2009/03/04:15:57:21 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:15:57:23 * [gsdsiConnect] ORA-0,
2009/03/04:15:57:41 * Connecting to database, connect string is te04as
2009/03/04:15:57:41 * [gsdsiConnect] ORA-0,
2009/03/04:15:57:41 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:15:58:01 * Connecting to database, connect string is te04as
2009/03/04:15:58:01 * [gsdsiConnect] ORA-0,
2009/03/04:15:58:01 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:15:58:21 * Connecting to database, connect string is te04as
2009/03/04:15:58:21 * [gsdsiConnect] ORA-0,
2009/03/04:15:58:21 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:15:58:41 * Connecting to database, connect string is te04as
2009/03/04:15:58:41 * [gsdsiConnect] ORA-0,
2009/03/04:15:58:41 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:15:59:01 * Connecting to database, connect string is te04as
2009/03/04:15:59:01 * [gsdsiConnect] ORA-0,
2009/03/04:15:59:01 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:15:59:21 * Connecting to database, connect string is te04as
2009/03/04:15:59:21 * [gsdsiConnect] ORA-0,
2009/03/04:15:59:21 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:15:59:41 * Connecting to database, connect string is te04as
2009/03/04:15:59:41 * [gsdsiConnect] ORA-0,
2009/03/04:15:59:41 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:16:00:01 * Connecting to database, connect string is te04as
2009/03/04:16:00:01 * [gsdsiConnect] ORA-0,
2009/03/04:16:00:01 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:16:00:21 * Connecting to database, connect string is te04as
2009/03/04:16:00:21 * [gsdsiConnect] ORA-0,
2009/03/04:16:00:21 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:16:00:41 * Error connecting database. -1
2009/03/04:16:00:41 * Error : Guardian Process terminated
2009/03/04:16:50:45 * Connecting to database, connect string is te04as
2009/03/04:16:50:45 * [gsdsiConnect] ORA-0,
2009/03/04:16:50:45 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:16:50:47 * [gsdsiConnect] ORA-0,
2009/03/04:17:18:36 * Connecting to database, connect string is te04as
2009/03/04:17:18:36 * [gsdsiConnect] ORA-0,
2009/03/04:17:18:36 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:17:18:38 * [gsdsiConnect] ORA-0,
2009/03/04:17:18:56 * Connecting to database, connect string is te04as
2009/03/04:17:18:56 * [gsdsiConnect] ORA-0,
2009/03/04:17:18:56 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:17:19:16 * Connecting to database, connect string is te04as
2009/03/04:17:19:16 * [gsdsiConnect] ORA-0,
2009/03/04:17:19:16 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:17:19:36 * Connecting to database, connect string is te04as
2009/03/04:17:19:36 * [gsdsiConnect] ORA-0,
2009/03/04:17:19:36 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:17:19:56 * Connecting to database, connect string is te04as
2009/03/04:17:19:56 * [gsdsiConnect] ORA-0,
2009/03/04:17:19:56 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:17:20:16 * Connecting to database, connect string is te04as
2009/03/04:17:20:16 * [gsdsiConnect] ORA-0,
2009/03/04:17:20:16 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:17:20:36 * Connecting to database, connect string is te04as
2009/03/04:17:20:36 * [gsdsiConnect] ORA-0,
2009/03/04:17:20:36 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:17:20:56 * Connecting to database, connect string is te04as
2009/03/04:17:20:56 * [gsdsiConnect] ORA-0,
2009/03/04:17:20:56 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:17:21:16 * Connecting to database, connect string is te04as
2009/03/04:17:21:16 * [gsdsiConnect] ORA-0,
2009/03/04:17:21:16 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:17:21:36 * Connecting to database, connect string is te04as
2009/03/04:17:21:36 * [gsdsiConnect] ORA-0,
2009/03/04:17:21:36 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:17:21:56 * Error connecting database. -1
2009/03/04:17:21:56 * Error : Guardian Process terminated
-----

Similar Messages

  • Can not start OC4J_BI_FORM after PORTAL user password change

    We changed PORTAL password by going top sqlplus and OAS. Thinking it will make changes at both places. Now we see that when we start OAS. OC4J_BI_FORM does not start???

    Please refer to section 6.4 Changing OracleAS Metadata Repository Schema Passwords and Table 6-2 Methods for Changing Oracle Metadata Repository Schema Passwords in the Oracle® Application Server Administrator's Guide, located at http://www.oracle.com/technology/documentation/appserver.html (Click View Library under Oracle Application Server 10g Release 2 (10.1.2.0.2))
    You should use the Application Server Control Console to change the password. After you change the password, restart Oracle HTTP Server and OC4J_Portal: In the home page for the instance, select HTTP_Server and OC4J_Portal and click Restart.
    Regards,
    Pete

  • Can Not start Database after Server is restarted !!!!

    I am building a oracle Hyperion Essbase and planning sandbox on my laptop using VMware 9.0
    and 11gr2 as ny database.
    Once I complete the install and config, I am installing the essbase EAS client, once that is completed I have too restart the server
    once the Server is back up, the database is giving me the following Error:
    Database Instance: Hyperion
    Enterprise Manager is not able to connect to the database instance. The state of the components are listed below. Page Refreshed  Aug 31, 2013 2:19:45 AM EDT  
    Database Instance
    Host  localhost
    Port  1521
    SID  Hyperion
    Oracle Home  C:\app\Administrator\product\11.2.0\dbhome_1
    Listener
    Status  Down
    Host  localhost
    Port  1521
    Name  LISTENER
    Oracle Home  C:\app\Administrator\product\11.2.0\dbhome_1
    Location  C:\app\Administrator\product\11.2.0\dbhome_1\network\admin
    Details  TNS-12541: TNS:no listener 
    Agent Connection to Instance
    Status  Failed
    Details  ORA-12541: TNS:no listener (DBD ERROR: OCIServerAttach
    Change Status Details
    Copyright (c) 1982, 2010, Oracle.  All rights reserved.
    SQL> Connected to an idle instance.
    SQL> SQL> ORA-00119: invalid specification for system parameter LOCAL_LISTENER
    ORA-00132: syntax error or unresolved network name 'LISTENER_HYPERION'
    Disconnected
    Database Instance: Hyperion
    Error Message
    The operation for starting up the database has failed. Click 'View Details' to see the error. You may have to perform a recovery.
    View Details
    Perform Recovery
    Enterprise Manager is not able to connect to the database instance. The state of the components are listed below. Page Refreshed  Aug 31, 2013 6:56:37 AM EDT
    Please advise

    Not clear what you are asking instruction i am following
    again I need a Database schema for Oracle Hyperion Shared Services
    I set up the database and config the Hyperion Essbase application
    but when I  restart the server the database gives me the above error
    Listener / Status  Down / Host  localhost
    and
    Agent Connection to Instance Status  Failed
    Details  ORA-12541: TNS:no listener (DBD ERROR: OCIServerAttach
    I manually went into the database instance and started the Listener
    but I can not start the database
    it is saying me to do a recovery ????
    Details
    SQL> Connected to an idle instance.
    SQL> SQL> ORA-00119: invalid specification for system parameter LOCAL_LISTENER
    ORA-00132: syntax error or unresolved network name 'LISTENER_HYPERION'
    Disconnected
    Database Instance: Hyperion
    Error Message
    The operation for starting up the database has failed. Click 'View Details' to see the error. You may have to perform a recovery.
    View Details
    Perform Recovery
    what can I do Please advise

  • I can not map field after changing data source location

    Hi
    I have a small problem that I got a report file and database from my customer, after that I setup database, open the file and change data source to my setting. but some filed can not map. The field mapping widonw does not display all field in the table. Of course I have checked the missing fields are existing in the table.
    OS:Windows7
    DB:Oracle11
    CR:XI Release 2
    Does anyone have an idea?

    hi,
    In Map Fields window, there is an option "Match Type".
    Please Unchek that option, so that you will be able to see all the fields from that table.
    Also, while mapping please verify the datatypes of source and target fields.
    Regards,
    Vamsee

  • Can't start WLS after change of JDK

    I changed JDK from 131 to 140 and the server won't even start....pls let me
    know what I need to change in the cmd file.
    Thanks.
    W

    It's not supported, but if you want to experiment, you can
    read this document: http://www.genuitec.com/products/JDK14_WLS61.pdf
    Jay Shen <[email protected]> wrote:
    I changed JDK from 131 to 140 and the server won't even start....pls let me
    know what I need to change in the cmd file.
    Thanks.
    W--
    Dimitri

  • Integration builder can not start up after sp9 to sp15 upgrade

    ID cann't start up, but IR can.
    java web start error is :
    can;t download  http://sp001:50000/dir/directory/iaik_jsse.jar
    I have tried re-Initialization but not work.

    hi
    ref this
          Java Web Start
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1688 [original link is broken] [original link is broken] [original link is broken]
    Unable to open IR/ESR/ID ? (XI/PI/PI 7.1) [Updated for PI 7.1 support]
    XI Integration Builder run on top of Javau2122 Web Start 1.4.2, which is part of J2SE 1.4.2.
    You need to download Javau2122 WebStart 1.4.2
    Troubleshooting:
    Probably Javau2122 WebStart does not detect the correct Proxy Settings .
    This could be set to None or to specific for values HTTP Proxy and HTTP Port .
    Contact your network administrator for the correct settings.
    To change the Proxy Settings:
    Select Windows Start menu -> All Programs -> Java Web Start -> Java Web Start
    Choose File -> Preferences -> General
    Choose None to switch off the proxy settings or Manual to set the HTTP Proxy and HTTP Port.
    ChooseOK
    Close Javau2122 Webstart

  • Table can not activate again after changing

    Hi, everybody
    For some reason that we create one more field call EKORG(Purchasing organisation) in table LFA1 and made choice for both Key and Initial value. Now, we are going to delete this field and activate table again, system show the following message, please kindly give us a hand and let me know how to solve this issue in more detail. We  use T-code: se14 and try to Activate and adjust database that system show the same message as below.
    Thanks you All.
    <b>Primary key change not permitted for value table LFA1
    Message no. AD300
    Diagnosis
    This table is defined as a check table. For reasons of consistency, changes to the primary key of the table are not allowed.
    Procedure
    If it is essential that you change the primary key, you must delete the relevant foreign keys. Refer to the where-used list to find all tables containing a field that is checked against this table. Delete the foreign keys for these fields.
    If necessary, maintain the deleted foreign keys again.</b>
    Message was edited by:
            Alfred

    Alfred,
    If you can't figure this out you should stop what you are doing and get help from someone who knows how to fix this mess.  I'll give you a hint, it isn't Programs...  And it might be something to do with tables...  Once you've got a list of all tables where LFA1 is used you will have to check them 1 by 1 to see if they use LFA1 as a check table.
    I'd still love to know what posessed you to mess around with the primary key of a standard SAP table?  And I'd also love to know why everyone is giving you help and suggestions on how to activate the table whilst no-one seems to care that you are changing a standard SAP primary key.  I can't believe you managed to get an access key to change the table in this way and no-one in your company/client questioned what and why you were doing it!
    LFA1 is a pretty important table in the SAP system (Vendor Master table) so to mess around with its primary key is utterly ridiculous.
    The only thing you should learn here is that changing SAP standard objects is usually a no-no.  Trying to change the primary key on a standard SAP table is a complete no-no.  There must have been an alternative to whatever it is you are trying to achieve.
    Gareth.

  • Can not start x after installing nvidia 173.14.x drivers [SOLVED]

    After installing nvidia-beta (version 173.14.05-5) I am unable to start x. I receive the errors:
    (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device PCI:1:0:0.
    (EE) NVIDIA(0): Please see the COMMON PROBLEMS section in the README for
    (EE) NVIDIA(0): additional information.
    (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
    I have tried the installer directly from nVidia itself and I receive the same results. Any help is appreciated. Thanks.
    Last edited by vytalelementz (2008-08-26 16:11:11)

    nvidia-utils-beta was installed, also my GPU is listed as supported on nvidia's site.
    Here's the whole xorg log file just in case:
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    X.Org X Server 1.4.0.90
    Release Date: 5 September 2007
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.25-ARCH i686
    Current Operating System: Linux ve1.vytalworld.org 2.6.25-ARCH #1 SMP PREEMPT Fri May 16 14:52:43 CEST 2008 i686
    Build Date: 22 May 2008 06:09:07PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Module Loader present
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 2 13:29:09 2008
    (==) Using config file: "/etc/X11/XF86Config"
    (==) ServerLayout "Layout0"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Device0"
    (**) |-->Input Device "Keyboard0"
    (**) |-->Input Device "Mouse0"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (==) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1
    (**) RgbPath set to "/usr/lib/X11/rgb"
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) Loader magic: 0x81e0900
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.3
    X.Org Video Driver: 2.0
    X.Org XInput driver : 2.0
    X.Org Server Extension : 0.3
    X.Org Font Renderer : 0.5
    (II) Loader running on linux
    (II) LoadModule: "pcidata"
    (II) Loading /usr/lib/xorg/modules//libpcidata.so
    (II) Module pcidata: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    ABI class: X.Org Video Driver, version 2.0
    (--) using VT number 7
    (II) PCI: PCI scan (all values are in hex)
    (II) PCI: 00:00:0: chip 10de,005e card 147b,1c12 rev a3 class 05,80,00 hdr 00
    (II) PCI: 00:01:0: chip 10de,0050 card 147b,1c12 rev a3 class 06,01,00 hdr 80
    (II) PCI: 00:01:1: chip 10de,0052 card 147b,1c12 rev a2 class 0c,05,00 hdr 80
    (II) PCI: 00:02:0: chip 10de,005a card 147b,1c12 rev a2 class 0c,03,10 hdr 80
    (II) PCI: 00:02:1: chip 10de,005b card 147b,1c12 rev a3 class 0c,03,20 hdr 80
    (II) PCI: 00:04:0: chip 10de,0059 card 147b,1c12 rev a2 class 04,01,00 hdr 00
    (II) PCI: 00:06:0: chip 10de,0053 card f47b,1c12 rev a2 class 01,01,8a hdr 00
    (II) PCI: 00:07:0: chip 10de,0054 card 147b,1c12 rev a3 class 01,01,85 hdr 00
    (II) PCI: 00:08:0: chip 10de,0055 card 147b,1c12 rev a3 class 01,01,85 hdr 00
    (II) PCI: 00:09:0: chip 10de,005c card 0000,0000 rev a2 class 06,04,01 hdr 01
    (II) PCI: 00:0a:0: chip 10de,0057 card 147b,1c12 rev a3 class 06,80,00 hdr 00
    (II) PCI: 00:0b:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01
    (II) PCI: 00:0c:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01
    (II) PCI: 00:0d:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01
    (II) PCI: 00:0e:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01
    (II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
    (II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
    (II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
    (II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
    (II) PCI: 01:00:0: chip 10de,0291 card 3842,c564 rev a1 class 03,00,00 hdr 00
    (II) PCI: 05:07:0: chip 104c,8023 card 147b,1c12 rev 00 class 0c,00,10 hdr 00
    (II) PCI: End of PCI scan
    (II) PCI-to-ISA bridge:
    (II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
    (II) Subtractive PCI-to-PCI bridge:
    (II) Bus 5: bridge is at (0:9:0), (0,5,5), BCTRL: 0x0204 (VGA_EN is cleared)
    (II) Bus 5 I/O range:
    [0] -1 0 0x00009000 - 0x000090ff (0x100) IX[b]
    [1] -1 0 0x00009400 - 0x000094ff (0x100) IX[b]
    [2] -1 0 0x00009800 - 0x000098ff (0x100) IX[b]
    [3] -1 0 0x00009c00 - 0x00009cff (0x100) IX[b]
    (II) Bus 5 non-prefetchable memory range:
    [0] -1 0 0xfea00000 - 0xfeafffff (0x100000) MX[b]
    (II) Bus 5 prefetchable memory range:
    [0] -1 0 0xfe900000 - 0xfe9fffff (0x100000) MX[b]
    (II) PCI-to-PCI bridge:
    (II) Bus 4: bridge is at (0:11:0), (0,4,4), BCTRL: 0x0004 (VGA_EN is cleared)
    (II) Bus 4 I/O range:
    [0] -1 0 0x00006000 - 0x000060ff (0x100) IX[b]
    [1] -1 0 0x00006400 - 0x000064ff (0x100) IX[b]
    [2] -1 0 0x00006800 - 0x000068ff (0x100) IX[b]
    [3] -1 0 0x00006c00 - 0x00006cff (0x100) IX[b]
    (II) Bus 4 non-prefetchable memory range:
    [0] -1 0 0xfe500000 - 0xfe5fffff (0x100000) MX[b]
    (II) Bus 4 prefetchable memory range:
    [0] -1 0 0xfe400000 - 0xfe4fffff (0x100000) MX[b]
    (II) PCI-to-PCI bridge:
    (II) Bus 3: bridge is at (0:12:0), (0,3,3), BCTRL: 0x0004 (VGA_EN is cleared)
    (II) Bus 3 I/O range:
    [0] -1 0 0x00007000 - 0x000070ff (0x100) IX[b]
    [1] -1 0 0x00007400 - 0x000074ff (0x100) IX[b]
    [2] -1 0 0x00007800 - 0x000078ff (0x100) IX[b]
    [3] -1 0 0x00007c00 - 0x00007cff (0x100) IX[b]
    (II) Bus 3 non-prefetchable memory range:
    [0] -1 0 0xfe700000 - 0xfe7fffff (0x100000) MX[b]
    (II) Bus 3 prefetchable memory range:
    [0] -1 0 0xfe600000 - 0xfe6fffff (0x100000) MX[b]
    (II) PCI-to-PCI bridge:
    (II) Bus 2: bridge is at (0:13:0), (0,2,2), BCTRL: 0x0004 (VGA_EN is cleared)
    (II) Bus 2 I/O range:
    [0] -1 0 0x00008000 - 0x000080ff (0x100) IX[b]
    [1] -1 0 0x00008400 - 0x000084ff (0x100) IX[b]
    [2] -1 0 0x00008800 - 0x000088ff (0x100) IX[b]
    [3] -1 0 0x00008c00 - 0x00008cff (0x100) IX[b]
    (II) Bus 2 non-prefetchable memory range:
    [0] -1 0 0xfe300000 - 0xfe3fffff (0x100000) MX[b]
    (II) Bus 2 prefetchable memory range:
    [0] -1 0 0xfe800000 - 0xfe8fffff (0x100000) MX[b]
    (II) PCI-to-PCI bridge:
    (II) Bus 1: bridge is at (0:14:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
    (II) Bus 1 I/O range:
    [0] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[b]
    [1] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[b]
    [2] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[b]
    [3] -1 0 0x0000ac00 - 0x0000acff (0x100) IX[b]
    (II) Bus 1 non-prefetchable memory range:
    [0] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[b]
    (II) Bus 1 prefetchable memory range:
    [0] -1 0 0xb0000000 - 0xcfffffff (0x20000000) MX[b]
    (II) Host-to-PCI bridge:
    (II) Bus 0: bridge is at (0:24:0), (0,0,5), BCTRL: 0x0008 (VGA_EN is set)
    (II) Bus 0 I/O range:
    [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
    (II) Bus 0 non-prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
    (II) Bus 0 prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
    (--) PCI:*(1:0:0) nVidia Corporation G71 [GeForce 7900 GT/GTO] rev 161, Mem @ 0xfc000000/24, 0xb0000000/28, 0xfd000000/24, I/O @ 0xac00/7
    (II) Addressable bus resource ranges are
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
    [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
    (II) OS-reported resource ranges:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    (II) Active PCI resource ranges:
    [0] -1 0 0xfeaf8000 - 0xfeafbfff (0x4000) MX[b]
    [1] -1 0 0xfeaff000 - 0xfeaff7ff (0x800) MX[b]
    [2] -1 0 0xfebff000 - 0xfebfffff (0x1000) MX[b]
    [3] -1 0 0xfebfe000 - 0xfebfefff (0x1000) MX[b]
    [4] -1 0 0xfebfd000 - 0xfebfdfff (0x1000) MX[b]
    [5] -1 0 0xfebfc000 - 0xfebfcfff (0x1000) MX[b]
    [6] -1 0 0xfebf9000 - 0xfebf90ff (0x100) MX[b]
    [7] -1 0 0xfebfa000 - 0xfebfafff (0x1000) MX[b]
    [8] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[b](B)
    [9] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[b](B)
    [10] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[b](B)
    [11] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[b]
    [12] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
    [13] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
    [14] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
    [15] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
    [16] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
    [17] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
    [18] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
    [19] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
    [20] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
    [21] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
    [22] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[b]
    [23] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[b]
    [24] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[b]
    [25] -1 0 0x00001c40 - 0x00001c7f (0x40) IX[b]
    [26] -1 0 0x00001c00 - 0x00001c3f (0x40) IX[b]
    [27] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[b]
    [28] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b](B)
    (II) Active PCI resource ranges after removing overlaps:
    [0] -1 0 0xfeaf8000 - 0xfeafbfff (0x4000) MX[b]
    [1] -1 0 0xfeaff000 - 0xfeaff7ff (0x800) MX[b]
    [2] -1 0 0xfebff000 - 0xfebfffff (0x1000) MX[b]
    [3] -1 0 0xfebfe000 - 0xfebfefff (0x1000) MX[b]
    [4] -1 0 0xfebfd000 - 0xfebfdfff (0x1000) MX[b]
    [5] -1 0 0xfebfc000 - 0xfebfcfff (0x1000) MX[b]
    [6] -1 0 0xfebf9000 - 0xfebf90ff (0x100) MX[b]
    [7] -1 0 0xfebfa000 - 0xfebfafff (0x1000) MX[b]
    [8] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[b](B)
    [9] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[b](B)
    [10] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[b](B)
    [11] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[b]
    [12] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
    [13] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
    [14] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
    [15] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
    [16] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
    [17] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
    [18] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
    [19] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
    [20] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
    [21] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
    [22] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[b]
    [23] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[b]
    [24] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[b]
    [25] -1 0 0x00001c40 - 0x00001c7f (0x40) IX[b]
    [26] -1 0 0x00001c00 - 0x00001c3f (0x40) IX[b]
    [27] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[b]
    [28] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b](B)
    (II) OS-reported resource ranges after removing overlaps with PCI:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    (II) All system resource ranges:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xfeaf8000 - 0xfeafbfff (0x4000) MX[b]
    [5] -1 0 0xfeaff000 - 0xfeaff7ff (0x800) MX[b]
    [6] -1 0 0xfebff000 - 0xfebfffff (0x1000) MX[b]
    [7] -1 0 0xfebfe000 - 0xfebfefff (0x1000) MX[b]
    [8] -1 0 0xfebfd000 - 0xfebfdfff (0x1000) MX[b]
    [9] -1 0 0xfebfc000 - 0xfebfcfff (0x1000) MX[b]
    [10] -1 0 0xfebf9000 - 0xfebf90ff (0x100) MX[b]
    [11] -1 0 0xfebfa000 - 0xfebfafff (0x1000) MX[b]
    [12] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[b](B)
    [13] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[b](B)
    [14] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[b](B)
    [15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [16] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [17] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[b]
    [18] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
    [19] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
    [20] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
    [21] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
    [22] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
    [23] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
    [24] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
    [25] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
    [26] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
    [27] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
    [28] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[b]
    [29] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[b]
    [30] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[b]
    [31] -1 0 0x00001c40 - 0x00001c7f (0x40) IX[b]
    [32] -1 0 0x00001c00 - 0x00001c3f (0x40) IX[b]
    [33] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[b]
    [34] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b](B)
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
    (II) "record" will be loaded by default.
    (II) "dri" will be loaded by default.
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "freetype"
    (II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
    (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    compiled for 1.4.0.90, module version = 2.1.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.5
    (II) Loading font FreeType
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    Module class: X.Org Server Extension
    (II) NVIDIA GLX Module 173.14.05 Mon May 19 00:30:52 PDT 2008
    (II) Loading extension GLX
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension RECORD
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "nvidia"
    (II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
    (II) Module nvidia: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    Module class: X.Org Video Driver
    (II) LoadModule: "kbd"
    (II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
    (II) Module kbd: vendor="X.Org Foundation"
    compiled for 1.4.0, module version = 1.2.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.0
    (II) LoadModule: "mouse"
    (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
    (II) Module mouse: vendor="X.Org Foundation"
    compiled for 1.4.0, module version = 1.2.3
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.0
    (II) NVIDIA dlloader X Driver 173.14.05 Mon May 19 00:10:20 PDT 2008
    (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    (II) Primary Device is: PCI 01:00:0
    (--) Assigning device section with no busID to primary device
    (--) Chipset NVIDIA GPU found
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.3
    (II) Loading sub module "wfb"
    (II) LoadModule: "wfb"
    (II) Loading /usr/lib/xorg/modules//libwfb.so
    (II) Module wfb: vendor="NVIDIA Corporation"
    compiled for 7.1.99.2, module version = 1.0.0
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xfeaf8000 - 0xfeafbfff (0x4000) MX[b]
    [5] -1 0 0xfeaff000 - 0xfeaff7ff (0x800) MX[b]
    [6] -1 0 0xfebff000 - 0xfebfffff (0x1000) MX[b]
    [7] -1 0 0xfebfe000 - 0xfebfefff (0x1000) MX[b]
    [8] -1 0 0xfebfd000 - 0xfebfdfff (0x1000) MX[b]
    [9] -1 0 0xfebfc000 - 0xfebfcfff (0x1000) MX[b]
    [10] -1 0 0xfebf9000 - 0xfebf90ff (0x100) MX[b]
    [11] -1 0 0xfebfa000 - 0xfebfafff (0x1000) MX[b]
    [12] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[b](B)
    [13] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[b](B)
    [14] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[b](B)
    [15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [16] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [17] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[b]
    [18] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
    [19] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
    [20] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
    [21] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
    [22] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
    [23] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
    [24] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
    [25] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
    [26] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
    [27] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
    [28] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[b]
    [29] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[b]
    [30] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[b]
    [31] -1 0 0x00001c40 - 0x00001c7f (0x40) IX[b]
    [32] -1 0 0x00001c00 - 0x00001c3f (0x40) IX[b]
    [33] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[b]
    [34] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b](B)
    (II) resource ranges after probing:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xfeaf8000 - 0xfeafbfff (0x4000) MX[b]
    [5] -1 0 0xfeaff000 - 0xfeaff7ff (0x800) MX[b]
    [6] -1 0 0xfebff000 - 0xfebfffff (0x1000) MX[b]
    [7] -1 0 0xfebfe000 - 0xfebfefff (0x1000) MX[b]
    [8] -1 0 0xfebfd000 - 0xfebfdfff (0x1000) MX[b]
    [9] -1 0 0xfebfc000 - 0xfebfcfff (0x1000) MX[b]
    [10] -1 0 0xfebf9000 - 0xfebf90ff (0x100) MX[b]
    [11] -1 0 0xfebfa000 - 0xfebfafff (0x1000) MX[b]
    [12] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[b](B)
    [13] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[b](B)
    [14] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[b](B)
    [15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [19] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [20] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[b]
    [21] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
    [22] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
    [23] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
    [24] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
    [25] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
    [26] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
    [27] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
    [28] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
    [29] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
    [30] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
    [31] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[b]
    [32] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[b]
    [33] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[b]
    [34] -1 0 0x00001c40 - 0x00001c7f (0x40) IX[b]
    [35] -1 0 0x00001c00 - 0x00001c3f (0x40) IX[b]
    [36] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[b]
    [37] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b](B)
    [38] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [39] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Setting vga for screen 0.
    (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    (==) NVIDIA(0): RGB weight 888
    (==) NVIDIA(0): Default visual is TrueColor
    (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    (**) NVIDIA(0): Enabling RENDER acceleration
    (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
    (II) NVIDIA(0): enabled.
    (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device PCI:1:0:0.
    (EE) NVIDIA(0): Please see the COMMON PROBLEMS section in the README for
    (EE) NVIDIA(0): additional information.
    (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
    (II) UnloadModule: "nvidia"
    (II) UnloadModule: "wfb"
    (II) UnloadModule: "fb"
    (EE) Screen(s) found, but none have a usable configuration.
    Fatal server error:
    no screens found

  • Can not open database control in oracle 11g r2, listener issues

    Hi,
    I installed Oracle 11g r2 database on my laptop for testing. at beginning everything was fine and working. 2 days later i am unable to run oracle database control.. i get page not found!
    I tried all the tricks and read almost 200 pages from oracle documentation, none of this was even close to help!
    (by the way oracle documentation is a fail in my opinion, it really tend to complicate things so much and talk about things not related to what a developer want to read about, its even hard for professional programmer to keep up with this, I started to hate dealing with Oracle before even going deep!!)
    I tried deleting database and creating new database i get the following warning:
    - Enterprise manager configuration failed due to the following error:
    listener is not up or database service is not registered with it. start listener and register database service.. etc.
    Some how after few hours the control is working but the database is not there, and it shows that the listener is up, but database is down.
    I tried creating a new database, but i get the error above (it seems its created but not linked to listener!!)
    I guess what triggered this error is running xampp, i was also working in php project and ran xampp for test, since then oracle is corrupted!
    any help would be appreciated (please don't send me links to oracle documentation because its useless and not straight to the point)
    Regards

    Hi
    thank you for the reply
    I assume i should do this through SQL plus?
    anyway, now am getting new error: ORA-00020: maximum number of processes (150) exceeded
    I get this error when trying to login to SQL plus, or create/configure database.
    I tried deleting oracle 11g via universal installer i get message saying run the command c:\...dbhome_1\deinstall\deinstall
    I don't understand Oracle totally collapsed in my laptop with no reason

  • Can nort start  OC4J_BI_FORM  after Portal password change(9.0.4)

    We changed PORTAL password by going top sqlplus and OAS. Thinking it will make changes at both places. Now we see that when we start OAS. OC4J_BI_FORM does not start???

    I provided an answer in the Portal Security forum:
    Can not start OC4J_BI_FORM after PORTAL user password change

  • Can not start SAP instance after change the profile

    Dear all
    We use system copy to build SAP system.
    Source
    Ecc 6.0(64 bit)
    Windows Server 2008 SP2
    SQL Server 2008 SP2
    Target
    Ecc 6.0(64 bit)
    Windows Server 2008 SP2
    SQL Server 2008 SP2
    In target system, we want to use the instance profile as source system,
    but after copy from source system we find that if parameter em address_space_mb = 512 in the profile,
    we can not start SAP instance.
    Could anyone explain it?
    Best regards
    Shirley

    Hi Shirley,
    I assume the hardware is less on the target than on the source or they are different at least in terms of hardware specs
    If the system is not starting, check the dev_disp.log, the stderr* files, and the dev_w0 log from the work directory to find the exact error. Does the system start if you increase or decrease this value?
    Regards,
    Paul

  • Can not start HTTP_server using "opmnctl startall" after applying p4505133

    After I apply patch 4505133 on win32
    10.1.0.5 PATCH SET FOR ORACLE DATABASE SERVER
    I can not start HTTP_Server using opmnctl startall, got following error in apache log file:
    [Thu Mar 22 22:43:54 2007] [error] (2)No such file or directory: mod_plsql: Please check your enviroment.\nORACLE_HOME is [C:\\OracleHomes\\oms10g]\nPATH is [C:\\OracleHomes\\oms10g\\bin;C:\\OracleHomes\\oms10g\\Perl\\5.6.1\\bin\\MSWin32-x86;C:\\OracleHomes\\oms10g\\Apache\\Apache\\fastcgi;C:\\OracleHomes\\oms10g\\opmn\\bin;C:\\OracleHomes\\oms10g\\opmn\\lib;C:\\OracleHomes\\oms10g\\opmn\\bin;C:\\OracleHomes\\oms10g\\opmn\\lib;C:\\OracleHomes\\oms10g\\bin;C:\\WINDOWS;C:\\WINDOWS\\system32]\nNLS_LANG is [Not Set]
    [Thu Mar 22 22:44:00 2007] [crit] (2)No such file or directory: mod_plsql: Unable to initialize Oracle OCI
    Any idea what is going on?
    thanks,

    Thanks for u r reply.
    resolved this issue
    oracle/middleware/oracle_idm1/bin
    oidldapd folder is missing. so we copied the folder from trail environment and placed in above directory and started opmnctl services.
    it worked.
    Thanks and Regards,
    sri485.

  • BPEL Server can not start after jazn default realm has been modified

    Hi, everyone:
    In order to customize my user task assigneeGroup, I set up a new realm in the jazn-data.xml using the shell (java -jar jazn.jar -shell). I tried to modify the jazn.xml file in %OraBPELPM%\integration\orabpel\system\appserver\oc4j\j2ee\home\config, and set the default-realm attribute to my new realm.
    After these modification, the BPEL Server can not start, the server seems to stop after loading the first two EJB.
    Does anyone ever encounter this problem? Could anyone help me?

    It appears that I had the wrong oracle home and as a result some of the steps were skipped by the Universal Installer during installation, but installation was still claimed as successful. Even by launching the 'Mobile Server Repository Wizard' manually by running 'repwizard.bat' did not provide all the necessary window boxes to provide the details such as the SID, hostname, port number. I re-installed.
    After starting the back-end database and then starting mobile server and testing in IE to see if the server was working by typing in http://<host name>:80/webtogo, I got the screen displaying mobile server.
    Many thanks for your help.
    Mark

  • Can not  start/stop fullfilment server after fresh install

    Can not start/stop fullfilment server after fresh install
    Product: e-business suite (11.5.9)
    Platform: Win XP 5.1 (SP2)
    We have performed a new installation of ebusiness suite in our windows platform.
    Installtion went with out any problem.
    But we can not start/stop the fullfilment server. While trying to start/stop the server we are getting follwing error message:
    c:\oracle11i\prodcomn\admin\scripts\PROD_03274019ih\jtffmctl.cmd start
    script returned:
    C:\oracle11i\prodcomn\admin\scripts\PROD_03274019ih>echo off
    You are running jtffmctl.cmd
    Mon 13/09/2004
    01:46 PM
    "Starting Fulfillment Server for "PROD" on port "9300" ...\n"
    "Error returned while running OUI"
    ERRORCODE = 1 ERRORCODE_END
    .end std out.
    Class not found: oracle.apps.jtf.fm.engine.processor.Processor
    Please let us know how to fix this issue.
    Regards, Kunal

    edit the jtffmctl.cmd and make sure that it point to the correct java path, alse try to use java 1.4.1

  • Service (Oracle Fulfillment Server VIS_oracle12) can not start

    in ERP12.0.4 on windows server 2003
    service (Oracle Fulfillment Server VIS_oracle12) can not start
    When I start the service it stops immediate or give me this message
    This is vision instance
    you can see the log of start and stop all services E:\oracle\VIS\inst\apps\VIS_oracle12\logs\appl\admin\log.
    AC-50001: Error - java.lang.NullPointerException occurred while executing script - null stop
    Raised by oracle.apps.ad.autoconfig.ServiceControl$Service
    ****************************************************

    Hi,
    Please check the log file for more details about the error.
    Was this working before? If yes, what changes have been done recently?
    Any errors in the event viewer?
    Regards,
    Hussein

Maybe you are looking for