Can not start SAP instance after change the profile

Dear all
We use system copy to build SAP system.
Source
Ecc 6.0(64 bit)
Windows Server 2008 SP2
SQL Server 2008 SP2
Target
Ecc 6.0(64 bit)
Windows Server 2008 SP2
SQL Server 2008 SP2
In target system, we want to use the instance profile as source system,
but after copy from source system we find that if parameter em address_space_mb = 512 in the profile,
we can not start SAP instance.
Could anyone explain it?
Best regards
Shirley

Hi Shirley,
I assume the hardware is less on the target than on the source or they are different at least in terms of hardware specs
If the system is not starting, check the dev_disp.log, the stderr* files, and the dev_w0 log from the work directory to find the exact error. Does the system start if you increase or decrease this value?
Regards,
Paul

Similar Messages

Can not start Weblogic server after Reordering the provider

Dear Geeks
I have ran into big trouble. I defined a new authentication provider in the weblogic and set the Control Flag to 'Required'.
I didn't realise that the user weblogic doesn't exist in the AD and because of AD's naming convention, we can not create a user named as weblogic.
Since, the installation was done using the weblogic user and the authentication provider has been changed, is there a way to start the server back up.
It is too critical and i am running out of time.
I would appreciate if anyone out there could help.
Thanks
Regards
ACM

Hi,
Goto Domain_home/config directory. Take one backup of config.xml, edit config.xml make Control Flag to SUFFICIENT against authentication provider that you have added. try to restart the server.
please mark if this helps.
Regards,
Kishore

Since I changed the operating system Windows 7 32bit to 64bit I can not use Firefox browser unless change the browser to safe mode.

Since I changed the operating system Windows 7 32bit to 64bit I can not use Firefox browser unless change the browser to safe mode.When i start it the browser is not open and appears a message
Mozilla Crash Reporter
== Crash ID(s) ==
20100611143157
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; .NET4.0C; .NET4.0E; InfoPath.3)

the 20100611143157 is an update which won't instal automatically on my notebook

Close Firefox, restart it says firefox can not start - already running, tried deleting the parent.lock it doesn't exist. I try to turn off my computer it says WidgiBho needs to close, I tell it to close but computer never shuts down

close Firefox, restart it says firefox can not start - already running, tried deleting the parent.lock it doesn't exist. I try to turn off my computer it says WidgiBho needs to close, I tell it to close but computer never shuts down

Did you try to wait a bit longer before restarting Firefox to give Firefox more time to close down completely?
See "Hang at exit":
*http://kb.mozillazine.org/Firefox_hangs
*https://support.mozilla.com/kb/Firefox+hangs

TS4002 I can not activate my iphone after running the software for icloud account not remember, I wish abble to open my computer soon. My phone IMEI 013007007033970

I can not activate my iphone after running the software for icloud account not remember, I wish abble to open my computer soon. My phone IMEI 013007007033970

Hi nguyen trong thang,
I apologize, I'm a bit unclear on the exact nature of your issue. If you are saying that you are having issues activating your iPhone, you may find the troubleshooting steps in the following article helpful:
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/ts3424
Regards,
- Brenden

My 2008 15" macbook pro would not start up. After pushing the power button, the startup tone sounded, but kept repeating as if something was jammed. Screen remained black with no logo nor messages. Pls help.

My 2008 15" macbook pro would not start up. After pushing the power button, the startup tone sounded, but kept repeating as if something was jammed. Screen remained black with no logo nor messages. Pls help.

Now that you mentioned it, that might be the source of the problem. Something was definitely wrong with my graphics card before the incident happened. You mean that particular batch of graphics cards had some inherent issues, right? I went to the genius bar, and the 'genius' there, without trying to diagnose the problem properly, just adviced me to buy a new mbp! He said Apple will no longer try to fix or touch macs older than 5 yrs. Mine is 5.5 yrs old...

Problems to start SAP instance after reboot

Hello experts,
we are occuring a problem that we are not able to start our SAP instance after we applied some MS patches and rebooted the server. We also deinstalled these patches buzt this also did not help, so I guess the reason somewhere else.
We are running a SQL server 2000 on a Windows 2003 SP2 (32bit)
SAP kernel is 640 PL 304
The SQL server seems to operate normally, however when we try to start SAP via MMC the process disp+work fails (it's green for a few seconds, but then turn so grey).
In dev_w0 I can find this entry
C Mon Feb 22 12:35:18 2010
C OpenOledbConnection: line 23082. hr: 0x8000ffff [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.
C sloledb.cpp [OpenOledbConnection,line 23082]: Error/Message: (err 17, sev 10), [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23082]: Error/Message: (err 0, sev 10), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
I hope you have an idea to solve the issue soon.
Thanks a lot
Philipp

Hi,
yes I read this SAP note however when I try to install this patch
It fails with message "installation unsuccessful"
Reason ??
Check the following:
1. Status of SQLServer Service(s)?
2. Windows Event Log Entries?
What is the SP level of SQL Server 2000 ?
Also, Perform the Connectivity Test as per[ this link|http://support.microsoft.com/kb/827422/].
Regards,
Bhavik G. Shroff

Can not start SAP (J2EE) -- Oraarch was full

Hi Everybody,
i can not start the sap system because thre is no space left under /oracle/<instance>/oraarch.
In /oracle/<instance>/oraarch i have the following files:
D05arch1_347_651422181.dbf
-rw-r----- 1 orad05 dba 43980800 May 9 23:00 D05arch1_348_651422181.dbf
-rw-r----- 1 orad05 dba 43980800 May 9 23:00 D05arch1_349_651422181.dbf
-rw-r----- 1 orad05 dba 43980800 May 10 20:00 D05arch1_350_651422181.dbf
-rw-r----- 1 orad05 dba 43980800 May 10 23:00 D05arch1_351_651422181.dbf
-rw-r----- 1 orad05 dba 43980800 May 10 23:20 D05arch1_352_651422181.dbf
-rw-r----- 1 orad05 dba 43980800 May 11 23:00 D05arch1_353_651422181.dbf
-rw-r----- 1 orad05 dba 43980800 May 11 23:00 D05arch1_354_651422181.dbf
-rw-r----- 1 orad05 dba 43980800 May 12 20:00 D05arch1_355_651422181.dbf
-rw-r----- 1 orad05 dba 43980800 May 12 23:00 D05arch1_356_651422181.dbf
-rw-r----- 1 orad05 dba 45900800 May 12 23:21 D05arch1_357_651422181.dbf
can i delete all files which was not created today or copy them to an other place? And how can i avoid this problem for the next time?
regards,
Seed
Edited by: seed_mopo on May 13, 2008 11:38 AM

Hi Seed,
archiver stuck ? You're serious ...? That kind of problem really should never appear...
Well perhabs it's a good idea to read some notes like:
SAP Note 14562 BRARCHIVE - archiver stuck
SAP Note 391 Archiver stuck
and the documentation [Setting Up Archiving|http://help.sap.com/saphelp_nw04/helpdata/en/65/96f1e4a6974512962197918624e1c5/frameset.htm].
If you have already done everything mentioned in the notes and the problem still appears, I propose you check for errors in the brarchive logs and the Oracle Alert.log.
KR Lars

Can not start a program after upgrade to version 5.0

I upgrade the iphone to version 5.0 and after that I can not start any program installed exept for the program that come with the phone

Ray,
You might have been there but I would like to know are there any error footprints in the logs?
eg.:
on OVMM: */var/log/ovm-manager/*
on OVM server: */var/log/xen/* && */var/log/ovs-agent/*
--Dheeraj.

I can not start my apple mobile device. the computer will attempt to start it up but then bumps me out. I have tried everything.

I can not start my apple mobile device. It will attempt to start and then bump my out. I think I need a third party and I do not know how to get a third party of to start the apple mobile device. I have looked online at people who had the same problem as me and tried to do what they did to get it started. I am still not able to get it started and I have been working on this for three day. please help if you can

See this article for instructions on restarting and re-installing the Apple Mobile Device service if necessary.
How to restart the Apple Mobile Device Service (AMDS) on Windows
B-rock

I can not access a website after downloading the new firefox, and I tried changing the proxy settings and it isnt working. How do i re-downlaod the old firefox?

I am trying to access course compass. It is a school website and is only compatible with firefox 3. I upgraded to firefox 4 and now i cant access the website. I have tried to change the proxy settings but that didn't work. I tried to download an older version of firefox and firefox wouldn't let me. I just need to access this website.

hello rotary, please see [[Fix problems connecting to websites after updating Firefox]]

Can't start WLS7 console after changing configuration

Hi,
Do you have similar situation using WebLogic v7 ?
We can’t start our weblogic server after changing JMS configuration
a bit. Our consultant and I discussed about the solution - one of
them was to re-install weblogic domain. However, this method is not
good for production since all applications will have to be re-installed
again although this WLS is for internal testing.
Using your production mind, what is the better approach while you can't
even start weblogic console after an incomplete configuration.
Consultant's description:
"Our web application needs to configure WebLogic 7.0 JMS service via
wls console. After I did configure a new Connection Factory and a
Destination Keys (actually I should configure a new JMS server and
queue here), the WLS couldn’t reboot so that there is no way to logon
console to modify JMS configuration."
Thanks,
Alex Lin

If WLS through the console is creating an unbootable config.xml this is a
bug.
When you start WLS it makes a copy of its bootable configuration by renaming
config.xml to config.xml.booted. If this corruption occurs as you not with
the console, then you have to back up to config.xml.booted and start over.
You should open a case with support describing:
a) the exact version of wls
b) copy of "bad xml"
c) the exact steps you took to cause the problem
To work around the problem I would try following the exact steps listed
here:
http://edocs.bea.com/wls/docs70/ConsoleHelp/jms.html
Cheers
mbg
"Alex Lin" <[email protected]> wrote in message
news:[email protected]..
Hi,
Do you have similar situation using WebLogic v7 ?
We can't start our weblogic server after changing JMS configuration
a bit. Our consultant and I discussed about the solution - one of
them was to re-install weblogic domain. However, this method is not
good for production since all applications will have to be re-installed
again although this WLS is for internal testing.
Using your production mind, what is the better approach while you can't
even start weblogic console after an incomplete configuration.
Consultant's description:
"Our web application needs to configure WebLogic 7.0 JMS service via
wls console. After I did configure a new Connection Factory and a
Destination Keys (actually I should configure a new JMS server and
queue here), the WLS couldn't reboot so that there is no way to logon
console to modify JMS configuration."
Thanks,
Alex Lin

Can not start OC4j Embedded Server in the same machine

Hi ,
Please some one help me out with this problem .
I have created two web services AddMacroTask and AddMasterTask .
My both the web services are not running simultaneously .
If I start the AddMacroTask web service then it show me the message that " Another instance is running ,OC4j will shutdown the previous version ...
Pls someone help me out ..
Thanks
Prashant Dwivedi

Hello,
The embedded OC4J in Jdeveloper 10g can run only 1 application (EAR) at the time, this is for testing/debugging.
My guess, is your 2 web services are located in 2 different applications this is why Jdeveloper does that.
The easiest way will be to deploy one of your service in a stand alone OC4J that you have started separately, you can take the one that is distributed with Jdeveloper located in $JDEV_HOME/j2ee/home.
Regards
Tugdual Grall

I can not create an Installer, After install the Vision Builder Demo and then uninstall it. I can not create a Labview installer anymore, it asks me for a Vision Builder Installer, even if My Labview program does not have nothing to do with it...

I can not create an Installer on LabView, After install the Vision Builder Demo and then uninstall it. I can not create a Labview installer anymore, it asks me for a Vision Builder Installer, even if My Labview program does not have nothing to do with it...
Solved!
Go to Solution.

Hi Shada this can happen if you are including additional installers to your installer for example DAQmx. When you are doing this the installer has to include other files like MAX (Measuremente and Automation Explorer). Probably when you installed Vision Builder it updated MAX, so when your installer is trying to Include MAX, its asking for the source where it was installed in your computer in this case Vision Builder.
Here you can cache the information so its not asked again, or you can download a newer version fo DAQmx, so it will update MAX and change de dependecy.
You can find more details about this issue in this KB:
KnowledgeBase 3S88PJMY: Why Do I Get A "Missing Distribution" Error When Trying to Build an Installe...
And for keeping a copy here is more info:
How Do I Stop the Missing Distribution Notification Each Time I Build An Installer?
Best Regards
Benjamin C
Senior Systems Engineer // CLA // CLED // CTD

OEM Can't get to database after changing the port on the database

Hello OEM Gurus!
I had to change the port on a database(11g) from 1521 to 1526. I adjusted the listeners to include the SID (finapp1t) in the listener listening on port 1526. I removed the SID from OEM (10g btw) and rediscovered it. It successfully rediscovered.
Now I receive the following when I attempt to go into "tablespaces" or "tables" on the FINAPP1T database page:
Listener refused the connection with the following error: ORA-12505, TNS:listener does not currently know of SID given in connect descriptor The Connection descriptor used by the client was: (description=(address=(host=urora2t.unioncentral.com)(protocol=tcp)(port=1521))(connect_data=(sid=finapp1t)(server=dedicated)))
I then clean started the Agent on the server but I get the same results.
OEM seems to think that that database FINAPP1T is still using port 1521. I can connect to the database on port 1526 from my Desktop so I know the listener sees this database.
How do I tell OEM to update the port ?
Thanks for you help!
Edited by: sawright on Mar 29, 2012 10:33 AM

Success
The connection test was successful.
=============
Information from Review Screen:
Name Value
Oracle home path /u01/app/oracle/product/11.2.0/dbhome_1
Monitor Username dbsnmp
Monitor Password ******
Role NORMAL
Listener Machine Name urora2t.unioncentral.com
Port 1526
Database SID finapp1t
Preferred Connect String
Edited by: sawright on Mar 29, 2012 11:24 AM

Can not start SAP instance after change the profile

Similar Messages

Maybe you are looking for