Can not stripe T/C using Edit-to-tape balck and code function

I am in Edit-to-tape mode, mastering, I have T/C enabled, I am attempting to stripe an NTSC Digibeta; I click black and code and choose the settings and then select starting T/C (00;56;00;02) and click Drop Frame, click OK when it says it will erase the tape, but when it actually starts striping the tape, it does not start at 00;56;00;02, it starts at random times that appear to be generated externally.
How do I actually stripe a tape and re-write T/C?
Sorry, this is my first time doing projects like this.

Decide whether you want drop frame or Non Drop Frame and set the switch accordingly ( switch under the flip out control panel) also verify your in record run here
Set the TC switch on the deck to "INT" and "Preset" then set the TC start time, by pressing the "hold" button. You can now set hours min sec frames by pressing the jog button and rotating the jog wheel. rotate the jog wheel without pressing the jog button to select the next pair of numbers. when you have the desired start TC press the set button. If the deck is connected to black burst and you have no SDI input feeding it, and SDI selected as the input, the deck will generate black when you press record on the deck thus beginning your stripe. Stripe past 1 hr, stop the deck and rewind a little so you're in active code, set the TC switch back to "regen" from "Preset", make your patches put the deck in remote and assemble edit your piece. If you want to do an insert, stripe the tape out about 30 seconds past your last frame.
the dbeta deck will insert or assemble. Not all decks will, some won't even assemble, only hard record. consult the deck manual when in doubt

Similar Messages

Contribute 6.5 can not ftp after years of no issues with CS4 and CS5

The problem
Contribute 6.5 can not connect via ftp using settings that formerly worked (and still do) in CS4 and CS5.
How we ended up here
I am the administrator website where
Our content editors have been using Contribute CS 4 and Contribute CS 5 without issue, 6+ years.
We are trying to upgrade to CS 6.5 to better support HTML5 markup now used within the site.
When attempting to configure a website connection in 6.5, Contribute alerts:
"Contribute cannot find the website files on the server. Please contact the website's administrator for assistance."
After closing the dialog box the failed connection is removed from contributes website connection list.
We have a shared hosting account and utilize ftp to publish changes.
Server is Win2008 with IIS 7.5
Again it's shared hosting, so read/write ftp are scoped to our account's directory.
We attempted this on serveral pcs including on a PC with a fresh install of Windows 7.
We can still connect successfully via ftp with CS4, CS5, dreamweaver, and Filezilla.
Which is why I believe this to be a Contribute 6.5 issue.
I've attempted the following troubleshooting articles:
Use network I/O logging to log operations, identify problems
I compared the I/O logging for both CS5 and CS 6.5 which both appear to log the same diagnostic steps.
Contribute FTP Server Checker (quite dated)
All successes reported. No failures.
Troubleshooting a Connection CS4 (linked from with CS 6.5's help UI)
As indicated above, alternate FTP clients have no issue.
This appears to be similar issue to the following posts:
5301620 - HELP - FTP Connection Error with Contribute 6.5
5907180 - Contribute 6.5 can no longer connect to sites ...
Unfortunately, there has been no solutions posted on either of these threads.
Any help would be greatly appreciated.
I can PM the network I/O log details if there is adobe staff who can get them in the right hands.
(Again the logs only show successes.)

@Zaldomoh
Have you found a solution or been given assistance from Adobe to resolve this issue? I'm having the same problem (CS 6.5 ftp'ing to a shared hosting enviroment). Details of our situation can be found on thread 1384686

Can not print report when using HTML or DHTML

Can not print report when using HTML or DHTML. When I open the report and click the print icon I get a small blank dialog box and then nothing. If I change to activex it works and I can print.
Any Ideas?
Thanks
Jeff

Hi,
I did not come across this situation before. Did you apply any fix packs. Try to check whether its a issue which can be fixed by applying fix pack( try to check release notes of fix pack and see if they mentioned any thing about this).
Thanks,
SK.

I can not download any files using Safari ? when I choose to download application file the URL include the file name and stop responding. Any help??

I can not download any files using Safari ? when I choose to download application file the URL include the file name and stop responding. Any help??

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. The Guest login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

I have a balance of $17 on my itunes but it's not allowing me to use it without re-entering the code on the back.can this be avoided?

I have a balance of $17 on my itunes but it's not allowing me to use it without re-entering the code on the back.can this be avoided?

Hi Arzgard,
Thanks for visiting Apple Support Communities.
If there is an interruption to Apple services, you can find out on this page:
http://www.apple.com/support/systemstatus/
If you're not able to connect to the iTunes Store, I'd recommend starting with the troubleshooting steps in this article:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Troubleshoot issues on an iPhone, iPad, or iPod touch
If you haven't been able to connect to the iTunes Store:
Make sure your date, time, and time zone are correct in Settings > General > Date & Time.
Note: Time Zone may list another city in your time zone.
Make sure that your iOS software is up to date by tapping Settings > General > Software Update (iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Try resetting (turning off and then on again) your Wi-Fi router.
If the issue persists, try troubleshooting your Wi-Fi networks and connections.
Regards,
Jeremy

Hi i would like help with: When I draw circle and add stroke I can not see stroke I use Photoshop CS 5

Hi i would like help with:
When I draw circle and add stroke I can not see stroke
I use Photoshop CS 5

Make sure the stroke is set to a color and not to the symbol that appears here for Fill

Background, Images, & text is blacked out. I can not see any menus to edit anything... Help

Background, Images, & text is blacked out. I can not see any menus to edit anything...
The curser shows there are links when you move over. I have uninstalled and re-installed Firefox and restarted my computer with no luck.
I can not see the menus to try and reset Firefox or change any settings.
HELP Please

hello obrienn214, other users with this problem all had an embedded intel hd3000 graphics card with an old driver present. in case this also applies to you, here would be a link to update the driver, which in turn should also address the black firefox problem: https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23764 (for win7 64 bit)
in case this doesn't solve the issue or does not apply to your system, start firefox into safemode '''by pressing the shift key while the application is launching''' & disable hardware acceleration in the firefox ''menu ≡ > options > advanced > general'' (that setting will take a restart of the browser to take effect).
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

HT5312 I can not access purchase anything using my Apple ID because I forget my security question to verify that it's me and forgot my password to my rescue email up change my security question. What do I do?

I can not access purchase anything using my Apple ID because I forget my security question to verify that it's me and forgot my password to my rescue email up change my security question. What do I do?

You need to ask Apple to reset your security questions; this can be done by phoning AppleCare and asking for the Account Security team, or clicking here and picking a method, or if your country isn't listed in either article, filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(105875)

I can not access face time or icloud on my phone they atr there but can not click on to use them????

i can not access face time or icloud on my phone they atr there but can not click on to use them????

These ones are tricky. But the following instructions are worth a try.
First do a complete uninstall of iTunes and related components (but don't reinstall just yet), as per the following document:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
a. Launch regedit (Start >> Search Programs and Files >> type Regedit and open the regedit that comes up.)
b. Access the following Location: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData \S-1-5-18\Components
c. Perform the following actions
i. Right Click on Components Folder
ii. Select Permissions
iii. Select Full Control and Read Permissions options
iv. Select Advanced Button
v. Select Owner Tab
vi. Select to Change Owner to the Administrators
vii. Check the option “Replace owner on subcontainers and objects”
viii. Select OK when prompted that it may not change all.
ix. Select Apply
x. Select Apply again
xi. Exit the Registry Editor
Now try reinstalling iTunes again. Does it go in properly this time?

Ipad2, I can not sign in to imessage after turning it off and doing a hard reboot. Upon entering my info it states no network connection, but I can use it o surf in Safari and iter websites. Any suggestions. Went on with Apple, they think its my network.

Ipad2, I can not sign in to imessage after turning it off and doing a hard reboot. Upon entering my info it states no network connection, but I can use it o surf in Safari and iter websites. Any suggestions. Went on with Apple, they think its my network. All other wireless equipment can ign on without problems. This happened after I turned imessage off.

Step by step, how did you arrive at seeing this agreement?

I can not update my N95 using Nokia Software Updat...

I can not update my N95 using Nokia Software Updater.
The error message "unable to update the software" will appear.
I have version 12.0.013.
Come with ideas, I have contacted Nokia's support and they want me to send the phone to them but it may be the final solution.

This page might answer your question:
http://linux.sgms-centre.com/nokiafaq/branded-phones/
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

I can not connect to wifi using iphone 4s

I can not connect to wifi using iphone 4s

If this is you home wifi try resetting the router. Turn if off at the wall wait a minute and turn it back on. Are you sure you have the right password?

Can not slide slider to use or turn off

can not slide slider to use or turn off ipod

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

"Hi,I need a help something wrong happen with my ITunes ,during to the download progress,after few seconds is report ; U can not download,err" in Using iPad • 0 bookmarks

"Hi,I need a help something wrong happen with my ITunes ,during to the download progress,after few seconds is report ; U can not download,err"
in Using iPad •

It's better to post the URL of the feed (as you have subsequently done) than the contents of the feed .
From the FeedValidator report the feed is basically OK for iTunes. There are several occasions where 'content:encoded' sections (following immediately on 'guid' tags) should be enclosed in
<description>...</description>
tags: however all this will be ignored by iTunes anyway and only applies to other readers. The 'potentially dangerous content' referred to by FeedValidator is within the 'content:encoded' tags and so isn't relevant to iTunes. They are referring to an inline css style, and I don't know whether this might cause a problem elsewhere.
You should really have a language tag, e.g.
<language>en-us</language>
(you have a dc:language tag but that's for a different system). This should be placed in the top section, before the first 'item' tag.
It's advisable to have an 'itunes:explicit' tag for each 'item' -
<itunes:explicit>yes IF CONTAINS ADULT MATERIAL, OTHERWISE no</itunes:explicit>
it's not compulsory if you have no adult material, but you must have a 'yes' if you do.
You can check your feed by subscribing in iTunes from the 'Advanced' menu - this has the same result as clicking the 'Subscribe' button on the Store page. If it works OK there you are ready to submit it.

How do I move files from my iMac to my Airport without getting 'AirPort can not be modified' message. File sharing is enabled and I'm not getting asked for a password. Thanks

How do I move files from my iMac to my Airport without getting 'AirPort can not be modified' message. File sharing is enabled and I'm not getting asked for a password. Thanks

What OS are you running.. this is usually only a problem in Mavericks.
If so I recommend you mount the hard disk manually..
Use Go, Connect to server.
Type in the IP address if static.. eg
AFP://10.0.1.1
Or the name.. but you will have issues unless the name is short, no spaces and pure alphanumeric.. if you are using bad names.. fix it by a full factory reset in airport utility and give it all names that comply to the above.
Type in
AFP://TCname.local Where TCname is replaced with the actual name.
You will be asked for the password the first time which is public unless you changed it.. please remember to save this in the keychain.
Copy files then to a new directory you create on the TC.. do not place files inside the TM sparsebundle. Nor directly under the main directory.

Can not stripe T/C using Edit-to-tape balck and code function

Similar Messages

Maybe you are looking for