Can not update BIOS R830-14U
Notebok Satellite R830-14U (part ? PT32LE) with BIOS 2.70 & EC 1.10
after upgrade Intel Management Engine Interface v.7.1.52.1176 i can not update BIOS - error "This computer is not supported"
http://ru.computers.toshiba-europe.com/innovation/dodriverLanguage=42
The ME Interface provides thermal management for Intel Mainboards. The Intel Management Engine Interface (Intel ME Interface) is the interface between the Intel Management Engine firmware and the host. Drivers and applications on the host that wish to interact with Intel Management Engine through host interface would use the Intel ME Interface host windows driver.
Model: Tecra R850, Portege R830, Satellite Z830, Qosmio F750, Portege Z830, Satellite Pro S750, Tecra R840, Satellite R830, Satellite Pro R850, Satellite R850
Downgade Intel Management Engine Interface to 7.00.02.1164 and/or reinstall Value Update Pack (vap-2011-614162421.zip) does not solve the problem.
What else can I do to fix this problem?
The problem is solved in complete restoration of the image of the disaster
Similar Messages
-
Tecra S11 - After HDD replacement I can't update BIOS
My Hard Disk in Tecra S11 died, and I have purchased a new SSD.
Everything work OK, but I can not update BIOS any more. Update utility show an error:
Error: Preparing to update was failed.
You have not given permission to execute the update.
What to do? Please help.> Error: Preparing to update was failed.
> You have not given permission to execute the update.
Do you have Admin rights?
Sounds like the issue could be related to missing privileges which are needed to run a update.
You could enable the admin account following these steps:
Choose command prompt (the black box cmd)
In the box type net user administrator /active:yes
Then log out. Usually an additional user account should be visible Administrator.
Now log in using this account and try to execute the BIOS update.
Note: in many cases the VAP (value added package) is needed to run the update BIOS.
Be sure also, that package has been unzipped correctly before running the exe file. -
Can not access BIOS after update BIOS
Can not access BIOS after update X220 BIOS to version 1.19
Type: 4290-R32
BIOS: 1.19
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/8duj09uc.txt
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/8duj09uc.iso
Ask google and try anyway but not work
- Press ThinkVantage, Press F1, Press Fn+F1
- Power off, unplug AC, unplug battery, wait 15 miniute, try all again
- Try to update BIOS againThat is really weird.
When you are in Windows, can you test and see if the F1 key is working? If it is working. Shut down the laptop then boot it back up. At the Thinkpad screen, keep spamming the F1 key and see if you are able to boot into BIOS.
//JameZ
Check out the Community Knowledge Base for hints and tips.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
X240 | 8GB RAM | 512GB Samsung SSD -
I can't update bios on Lenovo 3000 n200 because when I boot from cd and I start procedure to update, the bios did not see my ac power and keep asking to connect that. What can I do???
Hi
Welcome To Lenovo Community
We are really sorry to hear about the issue you are facing,
Please try disconnecting all cable and battery from the unit , Now press the power button for 30-40 sec then release , perform this action 4 -5 times , Connect Battery & Ac adaptor . Now charge the battery fully.
Once battery is changed completely now try to update the Bios
Do give this a try and let us know
Hope This Helps
Cheers!!!
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español -
Can not update request in data target
Hi,
We have a process chain for master data (10 parallel) loads. One of the load
failed with error "can not update request REQU_46xxxxxxxxxxxxxx in data target".
When I checked the InfoPackage
(a) update: full load
(b) it has data selection
(c) processing :PSA and then to data targets
(d) Data targets: update in all data targets for which active rules exist.
But I do not see any list of data targets here.
Can some one please suggest me how do I correct this load failure.
ThanksHi Wondewossen, NS and Nagesh,
Thanks for the information. I am in support, and the developer is
not here now.
I have checked Header tab in the monitor, in this there
is a update symbol and infosource name and an -->
but after arrow there is nothing.
when I click on this I get a message
"No active update rules exist".
Can you please advice me how to I correct this.
Thanks -
Can not update tab if its not the default sub-tab.
Can not update tab if its not the default sub-tab.
JDeveloper Version 10.1.2.1.0 (Build 1913)
Hi. I have a problem with a lovOpenWindowAction
The UIX is created with a master UIX and have several sub-tab that is included as UIX-pages.
The lovOpenWindowAction lies in the included UIX-page
The sub-tab I have a problem with has a table with users. Then I have a Create New button than I want to click on and select a new user that should be included in the table in the sub-tab.
When I click on the button I open a LOV-window. Here I select the user that I want to add.
In the LOV Action-class I save my new value in the database. Then in the method onLovUpdate I update the iterator with the new values from the database.
But in my GUI the subtab is not updated until I click on it.
But if I make the subtab the default subtab then it all works just fine and the GUI is updated directly.
Here is the code for the tableAction in the subtab. This code lies in an included UIX-page. Target is the table id.
<tableActions>
<button text="Create New" id=" createNewRollperson" accessKey="N">
<primaryClientAction>
<lovOpenWindowAction destination="FiskeRollpersonerLOV.do"
source=" createNewRollperson "
targets="joinedRollpersfiskeer message"/>
</primaryClientAction>
</button>
</tableActions>
Here is some code from the master UIX-page
<subTabLayout id="flikar">
<subTabs>
<subTabBar selectedIndex="${ui:defaulting(param.index,0)}">
<contents>
<link id="resorFlik" text="Resor"
disabled="${sessionScope.fiske.id == null}"
selected="${(param.source == 'resorFlik') or empty param.source}">
<primaryClientAction>
<firePartialAction event="changeTab" targets="flikar globalHeader">
<parameters>
<parameter key="source" value="resorFlik"/>
</parameters>
</firePartialAction>
</primaryClientAction>
</link>
<link id="rollpersonerFlik" text="Rollpersoner"
disabled="${sessionScope.fiske.id == null}"
selected="${param.source == 'rollpersonerFlik'}">
<primaryClientAction>
<firePartialAction event="changeTab" targets="flikar globalHeader">
<parameters>
<parameter key="source" value="rollpersonerFlik"/>
</parameters>
</firePartialAction>
</primaryClientAction>
</link>
</contents>
</subTabBar>
</subTabs>
<contents>
<switcher childName="${param.source}"
defaultCase=ResorFlik">
<case name="resorFlik">
<include node="${ctrl:parsePage(uix, 'includes/ResorFlik')}"/>
</case>
<case name="rollpersonerFlik">
<include node="${ctrl:parsePage(uix, 'includes/FiskeRollpersonerFlik')}"/>
</case>
</switcher>
</contents>
</subTabLayout>
What am I missing?? I cant have this subtab as the default subtab! Please help me with a solution!hi,
Change the condition type to manual entry.
or
for example delivery costs will be different at the time of PO and actual delivery costs then at the time of invoice we select planned delivery costs and settle them first with the actual delivery cost.
Thanks & Regards,
Kiran -
hello
I can not update creative cloud. Stuck at 2% with the following message: attempted connection to the server ...
I have a pc
pls help merestart your computer and retry.
-
my iphone4s can not update any apps. Nor is it able to download any new apps. What should I do?
I have two Apple Accounts. One in Switzerland and one in China. I used to be able to updates all of my apps by clicking individual apps. One day I clicked update all by accident. Ever since that, my iphone cannot update any of the apps. Nor is it able to download any new apps. Please kindly let me know how to make the phone back into work with the apps.
Many thanks.I find it difficult to believe that it took you a year to realize your phone was defective.
Restore the phone as new. Wait a couple of days before adding any apps to see if it's running ok. Then, add apps a couple at a time so that, if any of them cause issues, you'll have an idea which one. -
I have updated from Snow Leopard to Lion with Safari Version 5.0.5. Now I can not update to Safari 5.1. There is no update in the Software Updater, and on the apple-download page, I only found a Safari 5.1 for Snow Leopard. When executing it, there is an error message, that it is for 10.6 only.
It seems that I should have first updated Safari, and then only to Lion, which I didn't. Any idea how I can fix this now without having to rollback to Snow Leopard, update Safari and then go back to Lion?Try this Safari5.1 from the installer package
http://www.filefactory.com/file/cc9005d/n/Safari.pkg.zip
The download worked better with Firefox not sure why. At the bottom of the page after the captcha>> slow down load is the Free link, it took about 4 minutes to download on my test. -
Can not update iTunes because I have iMac with 10.5.8 . How I will sync my iphone 6.0 with an older version of iTunes on my iMac???? There is no update for the software of my iMac and no update for the iTunes.... So how can I sync????
Requirements for iPhone 5:
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.6.8 or later
PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes 10.7 or later
The highest version of iTunes you can install is 10.6.3 which will not sync with the iPhone 5.
Roger Wilmut1 wrote:
It's always a good idea to check the requirements before purchasing.
The person I spoke with at 1-800-MY-APPLE gave me totally different info...she said the iPhone 5 would in fact sync with the older version of iTunes and that I could restore from my previous iPhone 4 backup and also bring in my music that way. Hmmm....
I'm inclined to go by the published specs, but now I have to jump thru a bunch of hoops I wasn't expecting to. -
I have recently been having issues signing into my Apple ID and decided to go in and update my email and change my password.
Since changing my email and password I have been unable to update any of my apps. I receive this error message when trying to update, "You can not update this software since you have not owned the major version of this software."
I have looked into other forums and communities for a solution to this issue but from what I have read iTunes/Apple has yet to figure out a solution.
I have also read that the cause of this issue can be linked to two things.
One, is if you have multiple accounts on one computer. I only have one iTunes account/ Apple ID on this computer. This is my personal laptop and no one else has ever loaded on another account.
The second cause is linked to the country to which the apps were downloaded in. My computer and Apple ID were both created in the US, however 9 months ago I moved to New Zealand on a one year work holiday visa. Since living in New Zealand for the past 9 months I have been buying and updating apps, it wasn't until today when I received this error message.
I would really like to find a solution to this problem, but at the very least I would like to know what exactly caused this issue so that others may hopefully steer clear.
Any help would be much appreciated!
Cheers.I think the issue is that iTunes (for whatever reason) thinks I have two Apple ID's.
also, to further complicate the issue, when i try updating the apps from my iPod the iTunes store is still recognizing my old hotmail Apple ID. So when I go to enter my password it won't accept because it doesn't match with the old Apple ID, even though it is the same account (just new Apple ID name).
I have tried signing out within the App Store and re-signing in with my Apple ID but it still brings up my old Apple ID name when I try to update. -
I'm using same apple id for my ipad & ipod but after start using the same apple id on my ipad, i can't update my free software downloaded on both, it's showing "YOU CAN NOT UPDATE THIS SOFTWARE SINCE YOU HAVE NOT OWNED THE MAJOR VERSION OF THIS SOFTWARE" so how i can update my softwares on ipad & ipod using the same apple id
I think the issue is that iTunes (for whatever reason) thinks I have two Apple ID's.
also, to further complicate the issue, when i try updating the apps from my iPod the iTunes store is still recognizing my old hotmail Apple ID. So when I go to enter my password it won't accept because it doesn't match with the old Apple ID, even though it is the same account (just new Apple ID name).
I have tried signing out within the App Store and re-signing in with my Apple ID but it still brings up my old Apple ID name when I try to update. -
I can not update several of my apps that i have purchased a while back in my Apps Store on my MacPro. Because it keeps using my old @me account for iTunes and i don't remember the password or security question, Please help?
Hi AlphaCentori,
If you are having issues accessing the Apple ID that was used to originally purchase those apps, you may find the following article helpful:
Apple Support: Rescue email address and how to reset Apple ID security questions
http://support.apple.com/kb/ht5312
Regards,
- Brenden -
Can not update -'Error -36' I REMOVED Music folder FROM IPod!!!!!!
Hello!
I accidentely removed whole folder (directory for music) from iPod several days ago.
As a result my ipod is just empty- no music inside and I can not update that- because iTunes can't find the way.
It says : ' unknown error -36 '
Please tell me how I can resolve the issue?
Windows XP
pc Windows XPHi zen-an
Welcome to Apple Discussions
Does this link help?
-36 or "Disk cannot be read from or written to" error syncing iPod in iTunes
Regards,
Colin R. -
Can not update ipod touch, can not update ipod touch
Hello,
I have a ipod touch 1st gen and i havent used it for a few years, now i powered it up back again, working fine and able to synchronize etc.
The problem i have is that i can not update the iOS. When i try updating through iTunes it said: software is up to date. But when i try to download the Facebook app for example, i get the error: iOS 4.xx is required.
Can anyone help me out?
Greetings,
MichelThats just ****** up man, thanks for the fast answer though, almost paid those ******* 35 euro on the phone.
apps that are compatible with iOs 3.1.3, yea your funny. only ****** apps that will be.
ill give you 5 points for the quick answer although the answer did not help me
Maybe you are looking for
-
So last week, I installed Anamorphicizer so I could burn anamorphic 16 x 9 video from Final Cut Express to iDVD. It worked fine the first time I used it (Wednesday), but now I get this error message every time I drag a FCE movie onto the Anamorphiciz
-
Having multiple query windows open at once.
I wasn't sure how to phrase it so after some digging I'm resorting to asking on here. I've been working out of the 'Joes2Pros' series and I work within SMMS with SQL standard installed locally for playing. Most of the time I like to have multiple que
-
Report Development issue: I have queryy of 1600 line but report builder
Report Development issue: I have queryy of 1600 line but report builder 1320 lines . But i m can't create views becasue many parameters are used in it please give solution how can i paste 1600 line in report bulder.
-
Pan Newsreader AUR Packages Confusion...
Hi, not sure of this is the right group for this, but i just built a new Arch box and was installing my standard newsreader, Pan (v.0135) from files in the AUR, a process I've completed successfully a couple of times on other machines. Odd thing was
-
I use the Epson Stylus Pro 3800. What is the printer profile to use in the "color management" tab?